γ-Cyclodextrin-graphene quantum dots-chitosan modified screen-printed electrode for sensing of fluoroquinolones.

An innovative electrochemical approach based on screen-printed carbon electrodes (SPCEs) modified with graphene quantum dots (GQDs) functionalized with γ-cyclodextrin (γ-CD) and assembled to chitosan (CHI) is designed for the assessment of the total content of fluoroquinolones (FQs) in animal source products. For the design of the bionanocomposite, carboxylated graphene quantum dots synthesized from uric acid as precursor were functionalized with γ-CD using succinic acid as a linker. Physic-chemical and nanostructural characterization of the ensuing nanoparticles was performed by high-resolution transmission scanning microscopy, dynamic light scattering, Z potential measurement, Fourier transformed infrared spectroscopy and X-ray diffraction. Electrochemical properties of assembled bionanocomposite like potential difference, kinetic electronic transfer constant and electroactive area among other parameters were assessed by cyclic voltammetry and differential pulse voltammetry using potassium ferricyanide as redox probe. The oxidation behaviour of four representative quinolones with distinctive structures was studied, obtaining in all cases the same number of involved e- (2) and H+ (2) in their oxidation. These results led us to propose a single and consistent oxidation mechanism for all the checked analytes. The γ-CD-GQDs-CHI/SPCE sensor displayed a boosted electroanalytical performance in terms of linear range (4-250 µM), sensibility (LOD = 1.2 µM) and selectivity. This electrochemical strategy allowed the determination of FQs total amount in complex processed food like broths, bouillon cubes and milkshakes at three concentration levels (150, 75 and 37.5 µM) for both equimolar and different ratio FQs mixtures with recovery values ranging from 90 to 106%.

Cyclodextrin-modified graphene quantum dots as a novel additive for the selective separation of bioactive compounds by capillary electrophoresis.

Highly reliable separation and determination of various biologically active compounds were achieved using capillary electrophoresis (CE) based on ß-cyclodextrin-functionalized graphene quantum dots (ßcd-GQDs) as the background electrolyte additive. ßcd-GQDs improve the separation efficiency between peaks of all analytes. No addition of surfactants or organic solvents was needed in the running buffer containing ßcd-GQDs. Up to eight consecutive runs were acquired with high precision for the separation of resveratrol, pyridoxine, riboflavin, catechin, ascorbic acid, quercetin, curcumin, and even of several of their structural analogs. Baseline separation was achieved within just 13 min as a result of the effective mobility of the analytes along the capillary owing to the differential interaction with the additive. The proposed analytical method displayed a good resolution of peaks for all species selecting two absorption wavelengths in the diode array detector. Detection limits lower than 0.28 µg mL-1 were found for all compounds and precision values were in the range of 2.1-4.0% in terms of the peak area of the analytes. The usefulness of the GQD-assisted selectivity-enhanced CE method was verified by the analysis of food and dietary supplements. The applicability to such complex matrices and the easy and low-cost GQD preparation open the door for routine analyses of food and natural products. The concept of using such a dual approach (macromolecules and nanotechnology) has been explored to tackle the separation of various bioactive compounds in nutritional supplements and food. Schematic illustration of the electrophoretic separation of the bioactive molecules in the capillary which is filled with the running solution without (top) and with ßcd-GQDs (bottom). The fused silica capillary with negatively ionizable silanol groups at the wall. The voltage is applied at positive polarity at the outlet. R, riboflavin; r, resveratrol; P, pyridoxine; C, catechin; c, curcumin; A, ascorbic acid; Q, quercetin.

Passivated graphene quantum dots for carbaryl determination in juices.

This paper reports a simple method for the preparation of suitable graphene quantum dots after surface passivation, to be used for the determination of carbaryl in juice samples. A comparison of synthetic conditions for the preparation of graphene quantum dots following the top-down approach is described. In the one-step route selected, evaluation of diverse reaction time for cutting and modulating the oxidizing sites in the broken pieces of the initial graphene layer is conducted with a mixture of concentrated acids. Exploring the passivation effect on the purified graphene quantum dots, we demonstrated the suitability of the selected graphene quantum dots for practical application in the detection of carbaryl using fluorometric detection. Higher sensitivity was achieved after 8 min of contact, in which graphene quantum dots promotes the degradation of carbaryl into naphthol, being the latter responsible for the analytical signal. The detection and quantification limits were 0.36 and 1.21 µg/L, respectively, being the response linear up to 26 µg/L with excellent precision (better than 3.2% at the limit of detection). The recovery of the analyte from commercial juice samples (91.4-96.7%) testifies to the applicability of the proposal for the analytical problem selected.

Discrimination between nanocurcumin and free curcumin using graphene quantum dots as a selective fluorescence probe.

Accurate-controlled sized graphene quantum dots (GQDs) have been used as an analytical nanoprobe for detecting curcumin as a function of the photoluminescent quenching upon increasing concentrations of the analyte. Regarding the importance of curcumin nanoparticles in nutraceutical food, the analytical method described herein was also proven for the discrimination of curcumin remaining in free solution from that encapsulated into water-soluble nanomicelles of ca. 11 nm. This recognition is based on the displacement of GQD emission when interacting with both curcumin species. Maximum emission wavelength of GQDs suffers a gradual quenching as well as a red-shifting upon increasing concentrations of free curcumin (from 458 to 490 nm, exciting at 356 nm). On the other hand, in the presence of nanocurcumin, GQD photoluminescent response only displays a quenching effect (458/356 nm). The sensitivity of the described method in terms of detection limits was 0.3 and 0.1 µg mL-1 for curcumin and nanocurcumin, respectively. The applicability of the photoluminescent probe for the quantification and discrimination between both curcumin environments was demonstrated in nutraceutical formulations namely functional food capsules and fortified beverages such as ginger tea. Graphical abstract.

Ionic-liquid-based microextraction method for the determination of silver nanoparticles in consumer products.

A simple method to determine hazardous silver nanoparticles (AgNPs) based on ionic liquid (IL) dispersive liquid-liquid microextraction and back-extraction is described. This approach involves AgNP stabilization using a cationic surfactant followed by extraction from the sample matrix by means of an IL as an extraction phase. Certain ILs have high affinity for metals, and preliminary experiments showed that those ILs consisting of imidazolium cation efficiently extracted AgNPs in the presence of a cationic surfactant and a chelating agent. Afterward, histamine was used as a dispersing agent to promote phase transfer of differently coated AgNPs from the IL in aqueous solution to be subsequently analyzed by UV-visible spectrometry. The analytical procedure allows AgNPs to be recovered from the sample matrix in an aqueous medium, the enrichment factor being up to 4, preserving both AgNP size and AgNP shape as demonstrated by transmission electron microscopy images and the localized surface plasmon resonance band characteristic of each AgNP. The present method exhibited a linear response for AgNPs in the range from 3 to 20 µg/mL, the limit of detection being 0.15 µg/mL. Method efficiency was assessed in spiked orange juice and face cream, yielding recoveries ranging from 75.7% to 96.6%. The method was evaluated in the presence of other nanointerferents (namely, gold nanoparticles). On the basis of diverse electrophoretic mobilities and surface plasmon resonance bands for metal nanoparticles, capillary electrophoresis was used to prove the lack of interaction of the target AgNPs with gold nanoparticles during the whole protocol; thus, interferents do not affect AgNP determination. As a consequence, the analytical approach described has great potential for the analysis of engineered nanosilver in consumer products. Graphical abstract Simple protocol for the determination of silver nanoparticles (AgNPs) based on dispersive liquid-liquid extraction with a specific short alkyl side chain ionic liquid and their quantitative detection with a UV-visible spectrometer. HMIM•PF6 1-hexyl-3-methylimidazolium hexafluorophosphate, NP nanoparticle, SPR surface plasmon resonance.

Graphene quantum dots for enhancement of fluorimetric detection coupled to capillary electrophoresis for detection of ofloxacin.

A new CE method with fluorescence detection is reported on the determination of ofloxacin in milk samples using graphene quantum dots (GQDs) for sensitivity enhancement. Injection of GQDs prior the standards/sample is crucial to increase the antibiotic fluorescence response. Clean-up and preconcentration steps allowed for a good linear correlation in a concentration range between 50 and 1000 ng/mL for the ofloxacin, detection and quantification limits being 10.7 and 35.5 ng/mL, respectively. Optimal CE conditions for the seven-fluoroquinolone separation method were assessed in terms of buffer type, pH, and voltage. The selective interaction of GQDs with ofloxacin as model analyte was subsequently studied finding a significant sensitivity improvement; therefore, the analytes would be detected at low concentrations by means of a commercial CE device equipped with a multi-wavelength photoluminescence detector. Due to the different maximum emission wavelengths of the target compounds and the limitations shown by the single-wavelength photoluminescence detector coupled to the CE system, we demonstrated the usefulness of the GQD-assisted sensitivity-enhanced CE method to determine ofloxacin in milk samples. This work opens an interesting possibility of using GQDs in separation techniques combined with photoluminescence detectors for lowering sensitivity levels typically provided by the mere device.

Nanotechnological foundations of a «new¼ Nephrology. / Bases nanotecnológicas de una «nueva¼ Nefrología.

After contextualising the generic frameworks of nanotechnology and nanomedicine, the 2disciplines are discussed in the field of Nephrology. The potential downside to nanonephrology is the renal clearance of nanoparticles, the use of which is ever-increasing both for nanomedicinal purposes and in nanofoods. The positive impact of nanotechnology in Nephrology is centred on the development of renal nanodiagnostics for basic renal function studies, the early diagnosis of acute kidney injury, reliable and simple follow-up of chronic kidney disease and the improvement of magnetic resonance imaging. Renal drug nanotherapies comprise an important and dual-faceted area: The protection of drugs and nephrotoxic agents (e.g. antibiotics, antiretrovirals, contrast media, etc.) on the one hand, and the development of new kidney disease medications on the other. Renal 'nanotheranostics' is a promising but little-studied area. The impact of nanostructured supports on renal tissue regeneration is also discussed. The article concludes with a brief analysis of the various nanonephrology perspectives.

One-pot synthesis of graphene quantum dots and simultaneous nanostructured self-assembly via a novel microwave-assisted method: impact on triazine removal and efficiency monitoring.

One-step methods for fabricating green materials endowed with diverse functions is a challenge to be overcome in terms of reducing environmental risk and cost. We report a fast and easy synthesis of multifunctional materials composed of only fluorescent dots with structural flexibility and high sorption capability. The synthesis consists of a one-pot microwave-assisted reaction for the simultaneous formation of graphene quantum dots (GQDs) from organic precursors and their spontaneous self-assembly forming porous architectures. The GQD-assemblies are robust and no signs of degradation were observed with most organic solvents. The ensuing GQDs and their porous solids were fully characterized at the morphological and optical levels. Interestingly, the solid integrates both the advantages of porous materials and the nanoscale, showing a marked sorption capability towards hazardous electron-deficient triazines (112 mg g-1 of sorbent). Moreover, it also exhibits optical-responsive properties based on quantum confinement when it is disassembled acting as a fluorometric sensor in alcoholic solutions. Therefore, these properties enable this novel material to became a convenient bifunctional analytical tool not only for the removal of herbicides in apolar organic solvents but also as a chemosensor to monitor their presence in polar media. This work opens very challenging possibilities of creating porous graphene-based networks for contaminant remediation and monitoring.

Fluorescent nanocellulosic hydrogels based on graphene quantum dots for sensing laccase.

A novel low-cost fluorimetric platform based on sulfur, nitrogen-codoped graphene quantum dots immersed into nanocellulosic hydrogels is designed and applied in detecting the laccase enzyme. Although most of methods for detecting laccase are based on their catalytic activity, which is strongly dependent on environmental parameters, we report a sensitive and selective method based on the fluorescence response of hydrogels containing graphene quantum dots (GQDs) acting as luminophore towards laccase. The easily-prepared gel matrix not only improves the fluorescence signal of GQDs by avoiding their self-quenching but also stabilizes their fluorescence signal and improves their sensitivity towards laccase. Noncovalent interactions between the sensor and the analyte are believed to be causing this significant quenching without peak-shifts of GQD fluorescence via energy transfer. The selective extraction of laccase was proved in different shampoos as complex matrices achieving a detection limit of 0.048 U mL-1 and recoveries of 86.2-94.1%. As the unusual properties of nanocellulose and GQDs, the fluorescent sensor is simple, eco-friendly and cost-efficient. This straightforward strategy is able to detect and stabilize laccase, being an added-value for storage and recycling enzymes.

Pharmaceutical crystallization with nanocellulose organogels.

Carboxylated nanocellulose forms organogels at 0.3 wt% in the presence of a cationic surfactant. The resulting gels can be used as novel crystallization media for pharmaceutical solid form control, resulting in isolation a new sulfapyridine solvate, morphology modification and crystallization of an octadecylammonium salt of sulfamethoxazole.

One-Step Synthesis and Characterization of N-Doped Carbon Nanodots for Sensing in Organic Media.

Photoluminescent nitrogen-doped carbon nanodots (N-doped CNDs) soluble in organic media are synthesized in a one-step synthesis from a single-source precursor (an amphiphilic polymer), which exhibits a very high quantum yield (QY = 78%), excitation wavelength-dependent emission, and upconversion emission properties. The evolution of N-doped CND formation is studied via ultraviolet-visible and photoluminescence spectroscopy. Their analytical application as an effective sensor for the direct determination of nitroaromatic explosives and byproducts is shown based on their selective response via a fluorescence quenching mechanism. The proposed method is validated in soil samples by directly using the sensor in organic media without any further treatment or additional functionalization, which is an interesting aspect for practical applications.

Sulfonated nanocellulose for the efficient dispersive micro solid-phase extraction and determination of silver nanoparticles in food products.

This paper reports a simple approach to Analytical Nanoscience and Nanotechnology (AN&N) that integrates the nanotool, sulfonated nanocellulose (s-NC), and nanoanalyte, silver nanoparticles (AgNPs), in the same analytical process by using an efficient, environmentally friendly dispersive micro solid-phase extraction (D-µSPE) capillary electrophoresis (CE) method with s-NC as sorbent material. Introducing negatively charged sulfate groups onto the surface of cellulose enhances its surface chemistry and enables the extraction and preconcentration of AgNPs of variable diameter (10, 20 and 60nm) and shell composition (citrate and polyvinylpyrrolidone coatings) from complex matrices into a cationic surfactant. In this way, AgNPs of diverse nature were successfully extracted onto the s-NC sorbent and then desorbed into an aqueous solution containing thiotic acid (TA) prior to CE without the need for any labor-intensive cleanup. The ensuing eco-friendly D-µSPE method exhibited a linear response to AgNPs with a limit of detection (LOD) of 20µg/L. Its ability to specifically recognize AgNPs of different sizes was checked in orange juice and mussels, which afforded recoveries of 70.9-108.4%. The repeatability of the method at the limit of quantitation (LOQ) level was 5.6%. Based on the results, sulfonated nanocellulose provides an efficient, cost-effective analytical nanotool for the extraction of AgNPs from food products.

Reusable sensor based on functionalized carbon dots for the detection of silver nanoparticles in cosmetics via inner filter effect.

We report a low cost selective analytical method based on inner filter effect (IFE) for citrate-silver nanoparticle (cit-AgNP) detection, in which fluorescent amine-derivatized carbon dots (a-CDs) act as the donor and aggregated cit-AgNPs as the energy receptor. Carbon dots (CDs) were chemically modified with ethylenediamine (EDA) moieties via amidic linkage displaying an emission band at 440nm. The presence of cit-AgNPs produces a remarkably quenching of a-CD fluorescence via IFE, since the free amine groups at CD surface induce the aggregation of cit-AgNPs accompany by a red-shifting of their characteristic plasmon absorption wavelength, which resulted in "turn-on" of the IFE-decreased in CD fluorescence. The proposed method, which involves the use of chelating agents for removal of metal ions interferences, exhibits a good linear correlation for detection of cit-AgNPs from 1.23×10(-5) to 6.19×10(-5) mol L(-1), with limits of detection (LOD) and quantification (LOQ) of 5.17×10(-6) and 1.72×10(-5) mol L(-1,) respectively. This method demonstrates to be efficient and selective for the determination of cit-AgNPs in complex matrices such as cosmetic creams and reveals many advantages such as low cost, reusability, high sensitivity and non time-consuming compared with other traditional methods.

ß-Cyclodextrin decorated nanocellulose: a smart approach towards the selective fluorimetric determination of danofloxacin in milk samples.

An innovative and versatile strategy of Solid Phase Microextraction (SPME) is shown by using a new type of ß-cyclodextrin-modified nanocellulose (CD-NC) as a sorbent material. ß-cyclodextrin (used as an inclusion-type selector) was covalently bonded to amine-modified nanocellulose by an amidation reaction. Such novel nanocavities were successfully applied to the selective recognition of danofloxacin (DAN), an antibiotic used to treat animal diseases, via supramolecular host-guest interactions. The SPME methodology, using a platform based on ß-cyclodextrin-"decorated" nanocellulose as a sorbent material, showed a wide linear fluorimetric response against DAN from 8 to 800 µg L(-1) and a detection limit of 2.5 µg L(-1). The specific recognition of DAN has been proven to be highly selective and efficient against this metabolite and other fluoroquinolones. The reusability and the high efficiency in the extraction and preconcentration of DAN in milk samples allow recoveries of 94%.

Fluorescent carbon dot-molecular salt hydrogels.

The incorporation of functionalised carbon nanodots within a novel low molecular weight salt hydrogel derived from 5-aminosalicylic acid is reported. The carbon dots result in markedly enhanced gelation properties, while inclusion within the hydrophobic gel results in a dramatic fluorescence enhancement for the carbon nanomaterials. The resulting hybrid CD gels exhibit a useful sensor response for heavy metal ions, particularly Pb2+.

Correction: Fluorescent carbon dot-molecular salt hydrogels.

[This corrects the article DOI: 10.1039/C5SC01859E.].

Ternary composites of nanocellulose, carbonanotubes and ionic liquids as new extractants for direct immersion single drop microextraction.

We proposed for the first time the use of Nanocellulose (NC) into a single drop for extracting and preconcentrating a heterocyclic amine (HCA) in fried food. In conventional single-drop microextraction (SDME) techniques, ionic liquids (IL) or other organic solvents cannot extract HCAs due to its polarity. The advantageous combination of nanomaterials and nanohybrids based on NC and multiwalled carbonanotubes (MWCNT) with IL allows the preparation of a stable droplet with an excellent and selective ability for the preconcentration of the mutagenic 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx) by the simple direct immersion SDME technique. The main variables involved in the extraction and preconcentration steps have been evaluated and optimized. The developed method was found to achieve a linear calibration curve in the concentration range of 0.1-10 mg L(-1) (r(2)=0.998), with a detection limit (LOD) of 0.29 mg L(-1). Recovery of the method, which was studied in quintuplicate in sausage samples, varied from 90.1% to 95.3% for MeIQx.

Functionalized carbon dots as sensors for gold nanoparticles in spiked samples: formation of nanohybrids.

This paper reports the synthesis, passivation and functionalization of luminescent carbon dots (CDs) possessing surface thiol ending groups. A simple procedure involving amidation of passivated carbon dots (p-CDs) with cysteamine boosts their photoluminescent properties and enables their use as easily controlled fluorescent nanosensors for determining citrate-gold nanoparticles (AuNPs). The mechanism behind the quenching phenomenon was established from fluorescence measurements at high temperatures and lifetime tests, and found to involve static quenching leading to the formation of CD-AuNP nanohybrids. A method for determining AuNPs in complex matrices was developed and validated by application to spiked drinking water and mussel tissues. The limits of detection and quantitation for AuNPs thus obtained were 0.20 and 0.66 nmol L(-1), respectively.

Strong luminescence of carbon dots induced by acetone passivation: efficient sensor for a rapid analysis of two different pollutants.

The important photoluminescence enhancement found in Carbon Dots (CDs) obtained from carbonaceous nanomaterials when passivating with acetone is shown in this paper, in which this type of passivation has not been reported previously. Analytical fluorescent assays were performed with the selected CDs using two different pollutants as target analytes. The results show that the optimal conditions for detecting 2,4-dinitrophenol (DNP) were at pH 3.5 while in case of 2-amino-3,4,8-trimethyl-3H-imidazo[4,5-f]quinoxaline (4,8-DiMeIQx) were found at physiological pH. The fascinating ability of CDs to interact with certain molecules under certain conditions gave rise to explore some useful applications for a quick detection of contaminants by simply monitoring the photoluminescence of CDs as shown in this article.

New [2 × 2] copper(i) grids as anion receptors. Effect of ligand functionalization on the ability to host counteranions by hydrogen bonds.

Several complexes with a [2 × 2] grid structure have been obtained by the self-assembly of different copper(I) salts and ligands of the type 4,6-bis(pyrazol-1-yl)pyrimidine containing different substituents on the heterocycles. The main goal has been to evaluate the influence over the solid state and solution behavior of the functionalization of the pyrimidine ring with a primary amino substituent. The molecular and crystalline structures of some derivatives have been determined by X-ray diffraction. The grids contain two open voids formed by pairs of ligands facing one another on opposite sides of the grid in a somewhat divergent manner. One counteranion is hosted in each void interacting through hydrogen bonds and anion-π interactions. The presence of the amino group that points toward the inside of the cavity dominates the interactions in the void and apparently determines the orientation of the hosted counteranion and that of the ligands. With the exception of the derivative with chloride as the anion, the grid structure is preserved in solution (NMR and UV-vis) and some cation-anion interaction, increased by the presence of the amino group, exists also in solution (DOSY experiments). The experiments of anion interchange performed in solution indicate that a higher stability is found for the host-guest aggregates with OTs(-) (p-Me-C(6)H(4)SO(3)) and NO(3)(-). While for these anions a 1:2 stoichiometry is reached, for the rest of the anions tested (ReO(4)(-), OTf(-), and PF(6)(-)), only weaker 1:1 complexes are formed. Computational studies support the presence of anion-π interactions.