Novel nanostructured lipid carriers loading Apigenin for anterior segment ocular pathologies.

Dry eye disease (DED) is a chronic multifactorial disorder of the ocular surface caused by tear film dysfunction and constitutes one of the most common ocular conditions worldwide. However, its treatment remains unsatisfactory. While artificial tears are commonly used to moisturize the ocular surface, they do not address the underlying causes of DED. Apigenin (APG) is a natural product with anti-inflammatory properties, but its low solubility and bioavailability limit its efficacy. Therefore, a novel formulation of APG loaded into biodegradable and biocompatible nanoparticles (APG-NLC) was developed to overcome the restricted APG stability, improve its therapeutic efficacy, and prolong its retention time on the ocular surface by extending its release. APG-NLC optimization, characterization, biopharmaceutical properties and therapeutic efficacy were evaluated. The optimized APG-NLC exhibited an average particle size below 200 nm, a positive surface charge, and an encapsulation efficiency over 99 %. APG-NLC exhibited sustained release of APG, and stability studies demonstrated that the formulation retained its integrity for over 25 months. In vitro and in vivo ocular tolerance studies indicated that APG-NLC did not cause any irritation, rendering them suitable for ocular topical administration. Furthermore, APG-NLC showed non-toxicity in an epithelial corneal cell line and exhibited fast cell internalization. Therapeutic benefits were demonstrated using an in vivo model of DED, where APG-NLC effectively reversed DED by reducing ocular surface cellular damage and increasing tear volume. Anti-inflammatory assays in vivo also showcased its potential to treat and prevent ocular inflammation, particularly relevant in DED patients. Hence, APG-NLC represent a promising system for the treatment and prevention of DED and its associated inflammation.

Physicochemical, pharmacokinetic, and pharmacodynamic characterization of isradipine tablets for controlled release.

Isradipine is a dihydropyridine calcium channel blocker (CCB) commonly used as vasodilator with antihypertensive properties. A remote-controlled release formulation for isradipine would substantially improve the clinical outcomes of the patients requiring chronic long-term treatment. In this work, sustained release (SR) tablets of isradipine, composed of hydroxypropylmethyl cellulose (HPMC), have been produced by wet granulation and their in vitro and in vivo characterization was compared to a conventional tablet dosage form of immediate release (IR) as preliminary assessment. Tablets composed of 15.0% (wt/wt) HPMC exhibited a SR profile over a period of 24 hours. The release of isradipine followed a Fickian diffusion pattern obeying to the first order kinetics and the extent of absorption was even higher in comparison to the developed conventional tablets, which showed immediate drug release. In vivo studies were carried out in rabbits, showing that the extent of isradipine absorption from the developed tablets was higher in comparison to IR tablets due to the modified release profile obtained for the former (p < 0.05). Our results suggest that SR tablets of isradipine are an efficient solid dosage form to overcome the limitations encountered in conventional IR tablets.

Double membrane based on lidocaine-coated polymyxin-alginate nanoparticles for wound healing: In vitro characterization and in vivo tissue repair.

The aim of this study was to develop and characterize a double layer biomembrane for dual drug delivery to be used for the treatment of wounds. The membrane was composed of chitosan, hydroxypropyl methylcellulose and lidocaine chloride (anesthetic drug) in the first layer, and of sodium alginate-polymyxin B sulphate (antibiotic) nanoparticles as the second layer. A product with excellent thickness (0.01-0.02 mm), adequate mechanical properties with respect to elasticity, stiffness, tension, and compatible pH for lesion application has been successfully obtained. The incorporation of the drugs was confirmed analysing the membrane cross-sections by scanning electron microscopy. A strong interaction between the drugs and the functional groups of respective polymers was confirmed by Fourier-Transform Infrared Spectroscopy, thermal analysis and X-ray diffraction. Microbiological assays showed a high antimicrobial activity when polymyxin B was present to act against the Staphylococcus aureus and Pseudomonas aeruginosa strains. Low cytotoxicity observed in a cell viability colorimetric assay and SEM analysis suggest biocompatibility between the developed biomembrane and the cell culture. The in vivo assay allowed visualizing the healing potential by calculating the wound retraction index and by histological analysis. Our results confirm the effectiveness of the developed innovative biomaterial for tissue repair and regeneration in an animal model.

Formulating octyl methoxycinnamate in hybrid lipid-silica nanoparticles: An innovative approach for UV skin protection.

Sunscreens have been employed on daily skin care for centuries. Their role in protecting the skin from sun damage, avoiding accelerated photoaging and even limiting the risk of development of skin cancer is unquestionable. Although several chemical and physical filters are approved as sunscreens for human use, their safety profile is dependent on their concentration in the formulation which governs their acceptance by the regulatory agencies. A strategic delivery of such molecules should provide a UV protection and limit the skin penetration. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) may offer an alternative approach to achieve a synergistic effect on the UV protection when loaded with sunscreens as particles themselves also have a UV light scattering effect. Besides, the lipid character of SLN and NLC improves the encapsulation of lipophilic compounds, with enhanced loading capacity. Silica nanoparticles have also been employed in sunscreen formulations. Due to the formed sol-gel complexes, which covalently entrap sunscreen molecules, a controlled release is also achieved. In the present work, we have developed a new sunscreen formulation composed of hybrid SLN-Silica particles loaded with octyl methoxycinnamate (Parsol®MCX), and their further incorporation into a hydrogel for skin administration. Hybrid SLN-silica particles of 210.0 ± 3.341 nm of mean size, polydispersity below 0.3, zeta potential of ca. |7| mV, loading capacity of 19.9% and encapsulation efficiency of 98.3% have been produced. Despite the slight negative surface charge, the developed hybrid nanoparticles remained physicochemically stable over the study period. Turbiscan transmission profiles confirmed the colloidal stability of the formulations under stress conditions. The texture profile analysis of Parsol-SLN and Parsol-SLN-Si revealed semi-solid properties (e.g. adhesiveness, hardness, cohesiveness, springiness, gumminess, chewiness, resilience) suitable for topical application, together with the bioadhesiveness in the skin of pig ears. The non-irritation profile of the hybrid nanoparticles before and after dispersion into Carbopol hydrogels was confirmed by HET-CAM test.

Silver Nanoparticles-Composing Alginate/Gelatine Hydrogel Improves Wound Healing In Vivo.

Polymer hydrogels have been suggested as dressing materials for the treatment of cutaneous wounds and tissue revitalization. In this work, we report the development of a hydrogel composed of natural polymers (sodium alginate and gelatin) and silver nanoparticles (AgNPs) with recognized antimicrobial activity for healing cutaneous lesions. For the development of the hydrogel, different ratios of sodium alginate and gelatin have been tested, while different concentrations of AgNO3 precursor (1.0, 2.0, and 4.0 mM) were assayed for the production of AgNPs. The obtained AgNPs exhibited a characteristic peak between 430-450 nm in the ultraviolet-visible (UV-Vis) spectrum suggesting a spheroidal form, which was confirmed by Transmission Electron Microscopy (TEM). Fourier Transform Infra-red (FT-IR) analysis suggested the formation of strong intermolecular interactions as hydrogen bonds and electrostatic attractions between polymers, showing bands at 2920, 2852, 1500, and 1640 cm-1. Significant bactericidal activity was observed for the hydrogel, with a Minimum Inhibitory Concentration (MIC) of 0.50 µg/mL against Pseudomonas aeruginosa and 53.0 µg/mL against Staphylococcus aureus. AgNPs were shown to be non-cytotoxic against fibroblast cells. The in vivo studies in female Wister rats confirmed the capacity of the AgNP-loaded hydrogels to reduce the wound size compared to uncoated injuries promoting histological changes in the healing tissue over the time course of wound healing, as in earlier development and maturation of granulation tissue. The developed hydrogel with AgNPs has healing potential for clinical applications.

Dual-drugs delivery in solid lipid nanoparticles for the treatment of Candida albicans mycosis.

Nowadays, a combinatorial drug delivery system that simultaneously transports two or more drugs to the targeted site in a human body, also recognized as a dual-drugs delivery system, represents a promising strategy to overcome drug resistance. Solid lipid nanoparticles loaded with clotrimazole (CLZ) and alphalipolic acid (ALA), considered as an effective agent in the reduction of reactive oxygen species, can enhance anti-infective immunity being proposed as a non-toxic and mainly non-allergic dual-drugs delivery system. In this study, uncoated and cationic CLZ-ALA-loaded SLN were prepared and compared. Suspensions with a narrow size distribution of particles of mean size below 150 nm were obtained, having slight negative or highly positive zeta potential values, due to the presence of the cationic lipid, which also increased nanoparticles stability, as confirmed by Turbiscan® results. Calorimetric studies confirmed the rationale of separately delivering the two drugs in a dual-delivery system. Furthermore, they confirmed the formation of SLN, without significant variation in presence of the cationic lipid. In vitro release studies showed a prolonged drug release without the occurrence of any burst effect. In vitro studies performed on 25 strains of Candida albicans showed the antimicrobial drug activity was not altered when it was loaded into lipid nanoparticles. The study has proved the successfully encapsulation of CLZ and ALA in solid lipid nanoparticles that may represent a promising strategy to combine ALA protective effect in the treatment with CLZ.

Synthesis, structure-activity relationship and biological evaluation of tetracationic gemini Dabco-surfactants for transdermal liposomal formulations.

In this study, we report the relationship between structure, self-assembly behavior and antimicrobial activity of multicationic gemini surfactants and their successful use as stabilizers of a new liposomal formulation for transdermal drug delivery. New surfactants containing natural moiety 1,4-diazabicyclo[2.2.2]octane with four charges and two hydrophobic chains (n-Dabco-s-Dabco-n, where s = 2, 6, 12 and n = 12, 14, 16, 18) were synthesized. A linear dependence of the CMC decrease, with the increase of the number of carbon atoms in alkyl groups (slope 0.23) was shown. The aggregation numbers of n-Dabco-2-Dabco-n are smaller than 30 and they decrease with increasing alkyl chain length. This is in compliance with the larger surface area per n-Dabco-2-Dabco-n molecule. New liposomal formulations loading Rhodamine B phosphatidylcholine (with mean size about 100 nm and increased zeta potential from -7 ± 2 mV to +55 ± 2 mV) have been successfully stabilized by n-Dabco-s-Dabco-n surfactants. These formulations were designed to improve the bioavailability and skin permeation of loaded compound. The antibacterial activity of Dabco-surfactants was shown to be strongly affected by their structure (alkyl chain length and number of charged nitrogen). 12-Dabco-2-Dabco-12 was the most active (MIC = 0.48, 0.98 and 15.6 µg/mL against S. aureus, B. cereus and E. coli, respectively) without hemolytic activity at 3.1 µg/mL concentration. PC/14-Dabco-2-Dabco-14-liposomes were shown to be the best formulation, with the highest antibacterial activity against Sa (MIC = 7.8 µg‧mL-1) and lowest cytotoxicity (IC50 > 125). The modification of liposomes by Dabco-surfactants stabilizes the membrane of the vesicles, preventing the release of rhodamine B and impairing the penetration of the dye across Strat-M® membrane. Cellular uptake of rhodamine B-loaded PC/12-Dabco-2-Dabco-12-liposomes was also reported. This is the first example of cationic mixed liposomes containing Dabco-surfactants of potential interest for transdermal drug delivery.

3D printing in the design of pharmaceutical dosage forms.

Three-dimensional (3D) printing technologies are manufacturing approaches with widespread use in industry (e.g. automotive, automobile, pharmaceutical industries). With regard to its use in pharmaceutical industry, 3D printing is demonstrating to be of added value attributed to the possibility of printing tailored pharmaceutical products, namely personalized medical devices, such as implants and other dosage forms. However, with the approval of the first 3D-printed drug-product in 2015, a new perspective has arisen, i.e. the use of this technology to produce solid oral dosage forms exhibiting complex drug release profiles and allowing for individual dosing. Technological hurdles and regulatory issues still have to be overcome before this technology can truly find its place in the healthcare sector, where it can certainly contribute to a personalized and patient-centered healthcare. This manuscript offers a comprehensive analysis of the most extensively used methods of 3D printing in the pharmaceutical field, with examples of solid oral dosage forms and other medical devices currently under development or already marketed.

Uveal melanoma: physiopathology and new in situ-specific therapies.

Uveal melanoma is the most common primary intraocular tumor in adults. It can arise from melanocytes in the anterior (iris) or posterior uveal tract (choroid and ciliary body). Uveal melanoma has a particular molecular pathogenesis, being characterized by specific chromosome alterations and gene mutations (e.g., GNAQ/GNA11; BAP1), which are considered promising targets for molecular therapy. Primary treatment of uveal melanoma includes radiotherapy (brachytherapy and charged-particle therapy), phototherapy (photocoagulation, transpupillary thermal therapy, and photodynamic therapy) and surgery (local resection, enucleation and exenteration). Approximately half of patients with uveal melanoma will, however, develop metastasis, especially in the liver. The treatment of metastatic uveal melanoma includes systemic chemotherapy, immunotherapy and molecular targeted therapy. Liver-directed therapies, such as resection, chemoembolization, immunoembolization, radioembolization, isolated hepatic perfusion and percutaneous hepatic perfusion, are also available to treat metastatic uveal melanoma. Several clinical trials are being developed to study new therapeutic options to treat uveal melanoma, mainly for those with identified liver metastases. The present work discusses the physiopathology and new in situ-specific therapies for the treatment of uveal melanoma.

Lipid nanocarriers for the loading of polyphenols - A comprehensive review.

Polyphenols are secondary metabolites found in all vascular plants and constitute a large group of at least 10,000 unique compounds. Particular attention is currently being paid to polyphenols attributed to their beneficial effects in the protection and prevention of several diseases. While their use in food, pharmaceutical and cosmetic industries is largely documented, several environmental conditions (e.g. light, temperature or oxygen) may affect the physicochemical stability of polyphenols, compromising their bioactivity in vivo. To overcome these limitations, the loading of polyphenols into nanoparticles has been proposed aiming at both increasing their bioavailability and reducing eventual side effects. Lipid nanoparticles offer several advantages, namely their biodegradability and low toxicity, with the additional capacity to modify the release profile of loaded drugs. This paper is a review of the recent advances of lipid nanocarriers commonly used for the encapsulation of polyphenols, highlighting their added value to increase bioavailability and bioactivity of this group of compounds as well as their application in several diseases.

Mediterranean essential oils as precious matrix components and active ingredients of lipid nanoparticles.

Essential oils are recognized as valuable active pharmaceutical ingredients attributed to a set of biological properties, which include antibacterial, antifungal, antiviral, antioxidant, anticancer, immune-modulatory, analgesic and anti-inflammatory activities. Their use in pharmaceutics is however compromised by their limited water solubility and low physicochemical stability (i.e. volatility, oxidation). In order to overcome these limitations, we aimed to develop nanostructured lipid carriers (NLC) as delivery systems for Mediterranean essential oils, in particular Rosmarinus officinalis L., Lavandula x intermedia "Sumian", Origanum vulgare subsp. hirtum and Thymus capitatus essential oils, selected on the basis of their antioxidant and anti-inflammatory activities. NLC composed of Softisan (as solid lipid) have been produced by phase inversion temperature (PIT) and high-pressure homogenization (HPH), using two different emulsifiers systems. Particles have been further characterized for their mean particle size, polydispersity, zeta potential, morphology and chemical interactions. Best NLC formulations were obtained with Kolliphor/Labrafil as surfactants, and using Rosmarinus, Lavandula and Origanum as essential oils (PDI between 0.126 and 0.141, Zave < 200 nm). Accelerated stability studies have also been carried out to estimate the effect of the production method and surfactant composition on the long-term stability of EOs-loaded NLC. In vitro biological cell viability and anti-inflammatory activities were evaluated in Raw 264.7 cells (macrophage cell line), while in vitro antioxidant activity was checked by DPPH assay. Lavandula and Rosmarinus NLC were shown to be the most biocompatible formulations up to a concentration of 0.1% (v/v), whereas they were able to induce a dose-dependent anti-inflammatory activity in the order Lavandula > Rosmarinus ≥ Origanum.

Repurposing itraconazole to the benefit of skin cancer treatment: A combined azole-DDAB nanoencapsulation strategy.

In this work, we aimed at developing an improved topical SLN formulation combining itraconazole delivery with a coating layer of didodecyldimethylammonium bromide, thus repurposing the drug effectiveness by synergistic skin anticancer effectiveness. In order to obtain a stable SLN formulation with small homogeneously dispersed particles, a deep formulative study was developed screening three different solid lipids (Suppocire NB, Cetyl Palmitate and Dynasan 114) for the SLN preparation by the phase inversion temperature. A bluishcolored shade formulation, with homogeneous small particles size (<50 nm) was obtained only using Suppocire NB. The cytotoxicity of all SLN was tested after 24 h exposure against three adherent skin cell lines (A431, HaCaT and SK-MEL-5). Results demonstrate that both unloaded and drugloaded SLN did not significantly affect the cell viability of the non-tumoral HaCaT cell line, thus confirming the safe potential topical application of these formulations. A dose-dependent decrease in cell viability was observed for the tumoral cell lines, A431 and SK-MEL-5, with a significant reduction of the A431 cancer cell line viability. The drug molecule addition to the uncoated nanoparticles was able to increase of almost 20% the reduction of the viability of the cancer cells treated. Ours results demonstrate the potentiality of repurposing itraconazole activity by using the combined nanoencapsulation strategy with the positively charged coating layer on SLN, which can be further investigated as a promising stable and safe approach to significantly reduce the viability of skin cancer cells.

Release kinetics and cell viability of ibuprofen nanocrystals produced by melt-emulsification.

The clinical use of poorly water-soluble drugs has become a big challenge in pharmaceutical development due to the compromised bioavailability of the drugs in vivo. Nanocrystals have been proposed as a formulation strategy to improve the dissolution properties of these drugs. The benefits of using nanocrystals in drug delivery, when compared to other nanoparticles, are related to their production facilities, simple structure, and suitability for a variety of administration routes. High pressure homogenization (HPH) is the most promising production process, which can be employed at low or high temperatures. Ibuprofen nanocrystals with a mean size below 175 nm, and polydispersity below 0.18, have been produced by melt-emulsification, followed by HPH. Two nanocrystal formulations, differing on the surfactant composition, have been produced, their in vitro ibuprofen release tested in Franz diffusion cells and adjusted to several kinetic models (zero order, first order, Higuchi, Hixson-Crowell, Korsmeyer-Peppas, Baker-Lonsdale and Weibull model). Cell viability was assessed at 3, 6 and 24 h of incubation on human epithelial colorectal cells (Caco-2) by AlamarBlue® colorimetric assay. For both formulations, Caco-2 cells viability was dependent on the drug concentration and time of exposure.

Beyond liposomes: Recent advances on lipid based nanostructures for poorly soluble/poorly permeable drug delivery.

Solid lipid nanoparticle (SLN), nanostructured lipid carriers (NLC) and hybrid nanoparticles, have gained increasing interest as drug delivery systems because of their potential to load and release drugs from the Biopharmaceutical classification system (BCS) of class II (low solubility and high permeability) and of class IV (low solubility and low permeability). Lipid properties (e.g. high solubilizing potential, biocompatibility, biotolerability, biodegradability and distinct route of absorption) contribute for the improvement of the bioavailability of these drugs for a set of administration routes. Their interest continues to grow, as translated by the number of patents being field worldwide. This paper discusses the recent advances on the use of SLN, NLC and lipid-polymer hybrid nanoparticles for the loading of lipophilic, poorly water-soluble and poorly permeable drugs, being developed for oral, topical, parenteral and ocular administration, also discussing the industrial applications of these systems. A review of the patents filled between 2014 and 2017, concerning the original inventions of lipid nanocarriers, is also provided.

Targeting dendritic cells for the treatment of autoimmune disorders.

In the last decades, it has been recognized that extracellular vesicles (EVs) are not only cell debris with no biological role, but instead they play a key role in information exchange between cells either in health and disease conditions. EVs exhibit indeed their biological role in a pleiotropic manner. They can modulate immune responses through the activation, transfer or removal of surface receptors on target cells, the removal of cytolytic components such as membrane attack complexes, and the transfer of signaling molecules/effectors, such as nucleic acid species, infectious particles, and oncogenes. Among the naturally-derived nanoparticles that have been developed in the last years, stimuli responsive exosomes drew special attention since they intrinsically possess many attributes of a desirable drug delivery system. Their small size allows them to bypass the mononuclear phagocytic system (MPS) clearance, thereby prolonging their circulation time for passive targeting to inflammatory tissues. Moreover, they can deliver their cargo directly into the cytosol, avoiding the lysosomal/endosomal pathway and thus, increasing the transfection efficiency when they are used as gene delivery systems. of This review offers the state of the art knowledge on the physiology and properties of EVs, namely, apoptotic vesicles, microvesicles and exosomes as innovative drug delivery systems for gene therapy, with a special focus on targeting dendritic cells for the treatment of autoimmune disorders.

d-α-tocopherol nanoemulsions: Size properties, rheological behavior, surface tension, osmolarity and cytotoxicity.

The aim of this study was the assessment of the physicochemical stability of d-α-tocopherol formulated in medium chain triglyceride nanoemulsions, stabilized with Tween®80 and Lipoid®S75 as surfactant and co-surfactant, respectively. d-α-tocopherol was selected as active ingredient because of its well-recognized interesting anti-oxidant properties (such as radical scavenger) for food and pharmaceutical industries. A series of nanoemulsions of mean droplet size below 90 nm (polydispersity index < 0.15) have been produced by high-pressure homogenization, and their surface electrical charge (zeta potential), pH, surface tension, osmolarity, and rheological behavior, were characterized as a function of the d-α-tocopherol loading. In vitro studies in Caco-2 cell lines confirmed the safety profile of the developed nanoemulsions with percentage of cell viability above 90% for all formulations.

Compatibility study of paracetamol, chlorpheniramine maleate and phenylephrine hydrochloride in physical mixtures.

Paracetamol (PAR), phenylephrine hydrochloride (PHE) and chlorpheniramine maleate (CPM) are commonly used in clinical practice as antipyretic and analgesic drugs to ameliorate pain and fever in cold and flu conditions. The present work describes the use of thermal analysis for the characterization of the physicochemical compatibility between drugs and excipients during the development of solid dosage forms. Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC) were used to study the thermal stability of the drug and of the physical mixture (drug/excipients) in solid binary mixtures (1:1). DSC thermograms demonstrated reproducible melting event of the prepared physical mixture. Starch, mannitol, lactose and magnesium stearate influence thermal parameters. Information recorded from the derivative thermogravimetric (DTG) and TGA curves demonstrated the decomposition of drugs in well-defined thermal events, translating the suitability of these techniques for the characterization of the drug/excipients interactions.

Ibuprofen nanocrystals developed by 22 factorial design experiment: A new approach for poorly water-soluble drugs.

The reduction of the particle size of drugs of pharmaceutical interest down to the nano-sized range has dramatically changed their physicochemical properties. The greatest disadvantage of nanocrystals is their inherent instability, due to the risk of crystal growth. Thus, the selection of an appropriate stabilizer is crucial to obtain long-term physicochemically stable nanocrystals. High pressure homogenization has enormous advantages, including the possibility of scaling up, lack of organic solvents and the production of small particles diameter with low polydispersity index. The sequential use of high shear homogenization followed by high pressure homogenization, can modulate nanoparticles' size for different administration routes. The present study focuses on the optimization of the production process of two formulations composed of different surfactants produced by High Shear Homogenization followed by hot High Pressure Homogenization. To build up the surface response charts, a 22 full factorial design experiment, based on 2 independent variables, was used to develop optimized formulations. The effects of the production process on the mean particle size and polydispersity index were evaluated. The best ibuprofen nanocrystal formulations were obtained using 0.20% Tween 80 and 1.20% PVP K30 (F1) and 0.20% Tween 80 and 1.20% Span 80 (F2). The estimation of the long-term stability of the aqueous suspensions of ibuprofen nanocrystals was studied using the LUMISizer. The calculated instability index suggests that F1 was more stable when stored at 4 °C and 22 °C, whereas F2 was shown to be more stable when freshly prepared.

Lipid nanoparticles (SLN, NLC): Overcoming the anatomical and physiological barriers of the eye - Part I - Barriers and determining factors in ocular delivery.

Ocular drug delivery is still a challenge for researchers in the field of pharmaceutical technology due to anatomical and physiological eye characteristics. The tissue barriers (such as cornea, conjunctiva, blood aqueous barrier, and blood-retinal barrier) limit the access of drugs to their targets. Taking into account the short retention time in the precorneal area of classical ocular dosage forms (e.g. solutions, suspensions or ointments) which are rapidly eliminated by tears and eyelid movement, only less than five percent of the administered drug attains intraocular structures. With the aim to overcome ocular barriers, drug delivery systems, able to increase ocular bioavailability reducing side effects, are recognized as promising alternative. In this review, the main barriers and strategies to increase drug transport in ocular delivery are comprehensively discussed, highlighting the factors involved in ocular transport of SLN and NLC.

Lipid nanoparticles (SLN, NLC): Overcoming the anatomical and physiological barriers of the eye - Part II - Ocular drug-loaded lipid nanoparticles.

In the recent decades, various controlled delivery systems have been introduced with the aim to improve solubility, stability and bioavailability of poorly absorbed drugs. Among all, lipid nanoparticles gather interesting properties as drug or gene delivery carriers. These systems, composed either of solid lipids (SLN) or of solid and liquid lipids (NLC) stabilized with surfactants, combine the advantages of other colloidal particles such as polymeric nanoparticles, fat emulsions and liposomes avoiding their main disadvantages. Lipid nanoparticles represent an interesting approach for eye drug delivery as they can improve the corneal absorption of drugs enhancing their bioavailability. The Generally Recognized as Safe status of formulation excipients, the scaling-up facilities and the possibility of sterilization, make them suitable for industrial production. In this review, the latest findings, potential applications, and challenges related to the use of lipid nanoparticles for ocular drug delivery are comprehensively discussed.