Optimization of Biologically Inspired Electrospun Scaffold for Effective Use in Bone Regenerative Applications.

Human bone is composed of organic and inorganic composite materials, contributing to its unique strength and flexibility. Hydroxyapatite (HAP) has been extensively studied for bone regeneration, due to its excellent bioactivity and osteoconductivity, which makes it a highly valuable biomaterial for tissue engineering applications. For better therapeutic effects, composite nanofibers containing polyvinyl alcohol (PVA) and polyvinyl Pyrrolidone (PVP) were developed using an electrospinning technique in this study. Herein, hydroxyapatite (a major inorganic constituent of native bone) concentrations varying from 5 to 25% were reinforced in the composite, which could alter the properties of nanofibers. The as-prepared composite nanofibers were characterized by SEM, TEM, XRD, and FT-IR spectroscopy, and a bioactivity assessment was performed in simulated body fluid (SBF). The ICP-OES analysis was used to determine the concentration of Ca2+ and PO42- ions before and after SBF immersion. To optimize the material selection, the nanofibrous scaffolds were subjected to cell proliferation and differentiation in MG-63 osteoblast cell lines, but no significant toxicity was observed. In conclusion, HAP-PVA-PVP scaffolds exhibit unique physical and chemical properties and ideal biocompatibility, with great promise to serve as effective candidates for bone tissue applications.

Physio-Chemical and Biological Characterization of Novel HPC (Hydroxypropylcellulose):HAP (Hydroxyapatite):PLA (Poly Lactic Acid) Electrospun Nanofibers as Implantable Material for Bone Regenerative Application.

The research on extracellular matrix (ECM) is new and developing area that covers cell proliferation and differentiation and ensures improved cell viability for different biomedical applications. Extracellular matrix not only maintains biological functions but also exhibits properties such as tuned or natural material degradation within a given time period, active cell binding and cellular uptake for tissue engineering applications. The principal objective of this study is classified into two categories. The first phase is optimization of various electrospinning parameters with different concentrations of HAP-HPC/PLA(hydroxyapatite-hydroxypropylcellulose/poly lactic acid). The second phase is in vitro biological evaluation of the optimized mat using MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay for bone regeneration applications. Conductivity and dielectric constant were optimized for the production of thin fiber and bead free nanofibrous mat. With this optimization, the mechanical strength of all compositions was found to be enhanced, of which the ratio of 70:30 hit a maximum of 9.53 MPa (megapascal). Cytotoxicity analysis was completed for all the compositions on MG63 cell lines for various durations and showed maximum cell viability on 70:30 composition for more than 48 hrs. Hence, this investigation concludes that the optimized nanofibrous mat can be deployed as an ideal material for bone regenerative applications. In vivo study confirms the HAP-HPC-PLA sample shows more cells and bone formation at 8 weeks than 4 weeks.

Impedance Spectroscopy-Based Reduced Graphene Oxide-Incorporated ZnO Composite Sensor for H2S Investigations.

Electrochemical impedance spectroscopy (EIS) has been applied to measure the H2S gas response of the sensor fabricated on reduced graphene oxide (rGO)-incorporated nano-zinc oxide (n-ZnO) composites. These nanocomposites were prepared by a facile one-step solution route at room temperature. The structural, surface morphological, and elemental analyses of the composite material have been investigated. EIS was carried out to study the H2S gas-sensing properties of fabricated sensors. The developed sensor showed an optimal H2S gas response to various concentrations ranging from 2 to 100 ppm at 90 °C. The H2S gas-sensing performances of pure n-ZnO and various concentrations of rGO-incorporated n-ZnO were evaluated. The H2S gas-sensing results showed that n-ZnO/rGO composites exhibited high response when compared to pure n-ZnO. The enhanced H2S response was speculated to be ascribed due to two factors. First, rGO creates reactive sites for H2S molecule adsorption. Second, rGO has great electrical conductivity compared to n-ZnO that enables the active transport of electrons from H2S gas on interaction with the sensing layer, resulting in enhanced gas response at 90 °C temperatures.

Synthesis of Hexagonal ZnO-PQ7 Nano Disks Conjugated with Folic Acid to Image MCF - 7 Cancer Cells.

Surface modified ZnO nanomaterial is widely used in the field of bioimaging worldwide due to its optical properties, electronic characteristics and biocompatibility. Fluorescent enhanced, Polyquaternium-7(PQ7) capped, ZnO hexagonal nano disks (ZnO-PQ7) were synthesised by simple wet chemical method. The structural and optical properties of ZnO-PQ7 hexagonal nano disks were characterized using XRD, UV-Visible, Fluorescence, HRTEM, EDAX and FTIR studies. The size of synthesised ZnO-PQ7 were around 30-45 nm as confirmed by HRTEM studies. Fluorescence emission intensity increased with increase in PQ7 concentration. ZnO-PQ7 was further conjugated with folic acid (FA) to target human breast cancer cell line (MCF-7) via EDC/NHS coupling chemistry. Conjugation of folic acid with ZnO-PQ7 was confirmed by FTIR studies. The cell viability study using Methyl thiazolyltetrazolium(MTT) assay has demonstrated that the ZnO-PQ7 conjugated FA composites (ZnO-PQ7-FA) exhibit low toxicity towards MCF-7 up to a concentration of 125 µg/mL. Confocal laser scanning microscopic images confirmed the uptake of ZnO-PQ7-FA nanoparticles by MCF-7 cells. This study reveals ZnO-PQ7-FA nano disks as a potential imaging agent for detection of cancer cells. The synthesis route reported in this article is simple and easy to follow for the synthesis of ZnO-PQ7-FA in bulk quantities with high purity.