Irrigant dynamics of a back-to-back double side-vented needle in root canals with various tapers: a computational fluid dynamics study.

Understanding the apical pressure and irrigant flow patterns in root canals is crucial for safe and effective irrigation. Therefore, this study aimed to assess the flow characteristics of irrigants in root canal models with varying tapers during final irrigation by employing various needle designs, including a back-to-back double-side-vented needle, through computational fluid dynamics. The root canal model was configured as a closed geometrical cone with a simulated apical zone (size 30) and features tapers of 4%, 6%, and 8%. Three needle types-open-ended needle (OEN), single side-vented needle (SSVN), and double side-vented needle (DSVN)-were investigated. The results indicated that for the 4% taper models, the open-ended needle generated the maximum apical pressure, followed by the double side-vented needle and the single side-vented needle. However, in the 6% and 8% tapering root canal models, the double-side-vented needle applied the lowest maximum apical pressure. Consequently, the DSVN can pose a risk for irrigant extrusion in minimally prepared canals due to heightened apical pressure. In wider canals, the DSVN exhibited lower apical pressure. The maximum irrigant replacement was observed with OEN compared to that of the closed-ended group for both flow rates. Additionally, compared with OENs, closed-ended needles exhibited nonuniform and lower shear wall stress.

Knowledge of handling medical emergencies among general dental practitioners pan India: a cross-sectional survery.

BACKGROUND: Medical emergency situations in dental clinics have been contemplated to be an issue in most of the countries by reason of dentist's lack of knowledge and preparedness to attend emergency situations in dental offices. The aim of this paper is to observe the knowledge, attitude, and perceived confidence of the general dental practitioners regarding emergency medical care and its practical application. Questionnaire on knowledge assessment was circulated among 500 dentists using printed questionnaire formats and various social media platforms. The questionnaire included details on treating hypertensive patients, cardiopulmonary resuscitation training, accessibility of medical emergency equipments in the dental clinics, prevalence of medical emergency cases in the dental office and the self-assessed competence to handle medical emergency situations in the dental clinics. Data was surveyed and scrutinized using the Statistical Package for Social Sciences (SPSS), version 17 (SPSS Inc., Chicago IL). Descriptive statistics was tabulated and Chi square tests was applied. FINDINGS: 500 general dental practitioners pan India were involved in the study (294 were females and 207 were males). They were grouped into different age groups (20-30 yrs, 30-40 yrs, 40-50 yrs, 50 and above) and experience (0-5 yrs, 5-10 yrs and more than 10 years). 279 participants did not attend any medical emergency training whereas, 222 participants from all groups attended training program. It was observed that with increased experience in the field, the knowledge, awareness and confidence to treat medical emergency situation in the dental clinics was better. Dentists should update themselves from time-to-time with the latest technologies in the field and need to attend training programs to handle any medical emergency situations in the dental offices. Medical emergencies in a dental clinic can be encountered at any point of time and the clinician should have apt knowledge in handling such situations. Majority of the dentists feel subdued in managing medical situations in dental offices. Training and workshops for handling medical situations in the dental offices should be mandated at the undergraduate and postgraduate levels. This will help the dentist to shape one's confidence in managing such situations without apprehension. Availability of proper infrastructure and equipments is recommended in every dental clinics so as to ease the handling of the situation. CONCLUSION: This paper enlightens the need of basic life support training on regular basis among the dentists to improve the competence among them and to improve the confidence in handling such situations.

Effect of Different Surface Treatments on the Micro-Shear Bond Strength and Surface Characteristics of Zirconia: An In Vitro Study.

Purpose: To study the effect of different surface treatments on the micro-shear bond strength and surface characteristics of zirconia. Methods: Two types of zirconia ceramics were tested: opaque (O) and translucent (T). Each type of zirconia was further allotted into four groups based on the type of surface treatment method. The four groups were: control (C), air abrasion with 110 µm Al2O3 particles (A), etching with Zircos-E Etching solution for 2 hours (E), and a combination of air abrasion and etching (AE). After the surface treatment, all specimens were ultrasonically cleaned and 10 resin cement cylinders were attached to the zirconia discs in each group. A micro-shear bond strength test was performed in a universal testing machine at a crosshead speed of 0.5 mm/min. The fracture surfaces were assessed under a compound microscope. SEM, EDAX, and AFM analyses were done for the zirconia specimens after being subjected to surface treatment. Statistical analysis for the bond strength test was done using the Shapiro-Wilk test, one-way analysis of variance (ANOVA), and Post hoc Tukey test. Results: The micro-shear bond strength values for the groups were as follows in megapascals (MPa): OC 18.96 (5.54), OA 22.66 (2.51), OE 28.48 (4.50), OAE 28.63 (4.53), TC 22.82 (5.46), TA 25.36 (5.17), TE 28.12 (4.76), and TAE 32.00 (3.47). The one-way analysis of variance (ANOVA) and post hoc Tukey HSD tests were done which showed significant results in the groups. In opaque zirconia, significant differences were seen in the etching and air abrasion with etching groups when compared with the control and air abrasion groups. There was no difference between the etching and air abrasion with etching groups. For translucent zirconia, the only significant difference was seen in the air abrasion with etching group in comparison with the control and air abrasion groups. The mode of failure was majorly adhesive. The surface topography and surface roughness showed significant differences between the groups. The EDAX results showed material loss that occurred due to sandblasting in the air abrasion groups. Conclusions: Etching with Zircos-E Etching solution significantly increased the bond strength of zirconia to resin cement when compared with other surface treatment methods. In translucent zirconia, the best results can be achieved by combining etching with air abrasion.

Clinical studies in Ayurveda: A bibliometric analysis of articles indexed in AYUSH research portal.

Bibliometric analysis is a standard method for evaluating the quality and quantity of published articles. AYUSH research portal (ARP) is meant for the dissemination of research findings in the domains of Ayurveda, Yoga and Naturopathy, Unani, Siddha, Sowa-rigpa, and Homoeopathy and allied faculties. The study attempts to understand the trend of published Ayurveda clinical trial-based articles in terms of quality and quantity. Three perspectives of research output assessed in this study are productivity in the field of Ayurveda, evidence from articles, and its involvement with the body system where disease or malfunctions are induced. Based on the study, it is observed that the highest number of articles have been published under the musculoskeletal, endocrine/metabolic/nutritional categories, and skin. Further, it is observed that only 4.50% of articles are categorized under the evidence of Grade "A" (randomized controlled trials [RCTs]) as per the World Health Organization's traditional medicine research guidelines. Out of the top 20 journals which publish Ayurveda-based research works, only five journals are indexed in reputed indexing platforms viz., PubMed and Scopus. The findings indicate that, Ayurveda clinical trials have to be planned meticulously and carried out as per the RCT guidelines for producing quality evidence so that the abysmal percentage of grade-A category articles will increase in ARP. Further, the journals, which are not yet indexed in standard indexing platforms, must strive to secure a place in them to ensure access to appropriate peers and effective dissemination of findings.

Estimation of Age by Evaluating the Occlusal Tooth Wear in Molars: A Study on Dakshina Kannada Population.

PURPOSE: Assessment of teeth to estimate age in the living as well as the dead is well documented in the literature. Though applied in conjunction with other parameters in Gustafson's technique, attrition of teeth solely is an underexplored indicator for age estimation mainly in India. Most of the studies using attrition of teeth have been conducted in bioarchaeology, and in populations where studies are being conducted in forensic contexts, the results are debatable. Thus, the present study aimed to evaluate the accuracy of age estimation using the Average Stage of Attrition (ASA) method by Li and Ji in adults of the Dakshina Kannada region. MATERIALS AND METHODS: This cross-sectional study assessed the degree of attrition in both maxillary and mandibular first and second molars of 136 adults of Dakshina Kannada origin (age range: 20-70 years) according to the 10 stages given by Li and Ji to derive population-specific linear regression equations. RESULTS: Univariate analysis of prediction of age with attrition showed a significant association of attrition score with age, stratified by sex, arch as well as in total (p-value <0.001) with a standard error of estimate of 9.231 years. The estimated age was within ±5 years of the actual age in 44.2% of the females and 50.0% of the males. A comparative review of 23 studies done to estimate age from attrition score clinically is documented in the manuscript. CONCLUSION: The findings of this study suggest that evaluation of tooth wear by the Average Stage of Attrition (ASA) method can be used as a non-invasive means to aid in the determination of age in adults of Dakshina Kannada origin. Although the error increases with age, this method provides a measurable means of seriation into older and younger categories.

Identification and estimation of bioactive constituents Negundoside, Berberine chloride, and Marmelosin by HPLC and HPTLC for development of quality control protocols for Ayurvedic medicated oil formulation.

BACKGROUND: Anu Taila is an ancient medicated oil Ayurvedic preparation that is commonly used for nasya karma. It contains more than 25 herbs and goat milk as per the Ayurvedic Formulary of India (AFI). It strengthens the neck, shoulder, and chest muscles and improves the capacity of sense organs. It delays the aging process and reduces hair fall. Recent studies showed that it is also useful in COVID-19. In the current study, an attempt to develop quality control protocols and evaluate the standardization parameters like refractive index, iodine value, saponification value, peroxide value, acid value, rancidity, HPTLC fingerprint profile along with major bioactive compound and quantification of Berberine chloride, Negundoside, and Marmelosin by HPLC. Establishing quality protocol and standard parameters like physicochemical parameters and estimation of bioactive compounds of this preparation is significant for quality control. RESULTS: In this study, HPTLC identifies bioactive chemical compounds like Berberine chloride, Marmelosin, Negundoside, glycyrrhizin, and para hydroxybenzoic acid (PHBA), Lupeol, Embelin, and Solasodine, which were present in the Anu Taila formulation. HPLC was used to estimate the bioactive marker compounds Negundoside, Berberine chloride, and Marmelosin were present in the Anu Taila formulation. The quantitative evaluation of Berberine chloride (0.0013%), Marmelosin (0.0366%), Negundoside (0.0086%) is present in Anu Taila formulation. CONCLUSION: The study reveals that sufficient quality control parameters were followed during the preparation of the formulation. Physicochemical analysis was carried out as per the guidelines of Ayurvedic Pharmacopeia of India. HPTLC and HPLC profiles generated in this particular study can be considered as a preliminary tool ascertaining the authenticity of Anu Taila.

Correlation of Oxygenation and Radiographic Assessment of Lung Edema (RALE) Score to Lung Ultrasound Score (LUS) in Acute Respiratory Distress Syndrome (ARDS) Patients in the Intensive Care Unit.

BACKGROUND: Lung ultrasound score (LUS) as well as radiographic assessment of lung edema (RALE) score as calculated from chest radiography (CXR) have been applied to assess Acute Respiratory Distress Syndrome (ARDS) severity. CXRs, which are frequently performed in ARDS patients, pose a greater risk of radiation exposure to patients and health care staff. AIMS AND OBJECTIVES: The aim of the study was to evaluate if LUS had a better correlation to oxygenation (PaO2/FiO2) compared with the RALE score in ARDS patients. We also aimed to analyse if there was a correlation between RALE score and LUS. We wanted to determine the LUS and RALE score cut-off, which could predict a prolonged length of intensive care unit (ICU) stay (≥10 days) and survival. METHODS: Thirty-seven patients aged above 18 years with ARDS as per Berlin definition and admitted to the ICU were included in the study. It was a retrospective study done over a period of 11 months. On the day of admission to ICU, the global and basal LUS, global and basal RALE score, and PaO2 /FiO2 were recorded. Outcome and days of ICU stay were noted. RESULTS: Global LUS score and PaO2/FiO2 showed the best negative correlation (r = -0.491), which was significant (p = 0.002), followed by global RALE score and PaO2/FiO2 (r = -0.422, p = 0.009). Basal LUS and PaO2/FiO2 also had moderate negative correlation (r = -0.334, p = 0.043) followed by basal RALE score and PaO2/FiO2 (r = -0.34, p = 0.039). Global RALE score and global LUS did not show a significant correlation. Similarly, there was no significant correlation between basal RALE score and basal LUS. Global and basal LUS as well as global and basal RALE score were not beneficial in predicting either a prolonged length of ICU stay or survival as the area under curve was low. CONCLUSION: In ARDS patients, global LUS had the best correlation to oxygenation (PaO2/FiO2), followed by global RALE score. Basal LUS and basal RALE score also had moderate correlation to oxygenation. However, there was no significant correlation between global LUS and global RALE score as well as between basal LUS and basal RALE score. Global and basal LUS as well as global and basal RALE scores were not able to predict a prolonged ICU stay or survival in ARDS patients.

Tooth shade variation in Indian population: An objective guide to age estimation.

INTRODUCTION: The color of the teeth is affected by chronological age due to the variations of the hard and soft tissue structure of the teeth. There are very few studies have assessed the shade of the Enamel and correlated it with the age changes. Hence the study aimed to assess the enamel shade with the aging in the individual. MATERIALS AND METHODS: The central incisors of 388 individuals (5-78 years) were assessed for tooth color using a VITA 3D master shade guide and the Hue, Value and Chroma were noted. Mean grey values of the teeth were obtained by image manipulation using Image J software and normalized using the values obtained from the 18% contrast grey card. Chi square tests and linear regression analysis is used to find associations with age and tooth shade variations.Results: The teeth had higher score of Hue, Value and Chroma in older individuals. The tooth shade tended to shift towards redder hue with older age group. Simple linear regression analysis showed a significant correlation of age with normalized grey value in association with the shade parameters. (r = 0.717, SEE = 12.322 years)Conclusion: Tooth color changes with age and the mean age in grey values and shade guides can be a useful tool for age estimation.

Evaluation of the effectiveness of fluoridated and non-fluoridated desensitizing agents in dentinal tubule occlusion using scanning electron microscopy. An in-vitro study.

BACKGROUND: Dentin hypersensitivity is primarily caused due to patent or exposed dentinal tubules. Nonfluoridated-desensitizing agents deposit hydroxycarbonate apatite (HCA), within the dentinal tubules, thereby relieving hypersensitivity. Fluoride-containing bioactive glass-based agents form fluorapatite which is less soluble when compared to hydroxyapatite and HCA. MATERIALS AND METHODS: In this in vitro study forty dentin specimens obtained from extracted human premolars were divided randomly into four groups (n = 10): Group 1 - fluoridated bioactive glass (FBaG); Group 2 - bioactive glass (BaG); Group 3 - arginine calcium carbonate; Group 4 - saline. 37.5% phosphoric acid was used to ensure patent dentinal tubules. Test agents from each group were applied using a rubber cup. Half the treated samples were then subjected to 6% citric acid treatment. The degree of occlusion was evaluated using the scanning electron microscope, and the microscopic images were scored before and after the citric acid challenge by two blinded endodontists. Statistical analysis was performed using SPSS, one-way ANOVA, and post hoc Tukey test (P = 0.05). RESULTS: Group 1 demonstrated better tubule occlusion in comparison with Group 2 and a statistically significant difference when compared to Group 3 (P = 0.001). Following acid challenge, Group 2 showed significantly more occluded tubules when compared with Group 3 (P = 0.001) and comparable difference with Group 1. CONCLUSION: All desensitizing agents showed satisfactory dentinal tubule occlusion. While fluoridated bioactive glass demonstrated better occlusion immediately after application, Bioactive glass showed better resistance to acid treatment.

Comparative evaluation of three different toothpastes on remineralization potential of initial enamel lesions: A scanning electron microscopic study.

BACKGROUND: The early enamel lesions are reversible as it is a process involving mineral transactions between the teeth and saliva. AIM: To evaluate the efficiency of three different tooth pastes on remineralization potential of initial enamel lesions using Vickers Micro hardness Test and Scanning electron microscopy. MATERIALS AND METHODS: Artificial carious lesions were prepared in human enamel with demineralizing solution. The treatment agents included were Colgate sensitive plus® toothpaste, Regenerate enamel science™ toothpaste, BioRepair® toothpaste and control as Deionized water. All the samples were subjected to treatment solutions as per the pH cycling model for 12 days to simulate the daily oral environment's acid challenge. The remineralization parameters-surface hardness and surface roughness of enamel blocks were evaluated with Vickers indenter and Scanning electron microscope respectively. Statistical Analysis: ANOVA test was used to check mean differences between the groups. Post hoc analysis was done using Tukey's post hoc test. SEM images were graded according to Bonetti et al grading criteria. RESULTS: As per statistical analysis, maximum remineralization of enamel blocks occurred after applying Colgate Sensitive Plus® tooth paste followed by BioRepair® tooth paste and Regenerate enamel Science™ toothpaste. Least remineralization potential was shown by control group. CONCLUSION: Colgate sensitive plus tooth paste with Pro Argin™ formula can be regarded as a potential remineralising agent. It can be concluded as a noninvasive means of managing early enamel carious lesions.

Evaluation of Changes in the Occlusion and Occlusal Vertical Dimension in Children Following the Placement of Preformed Metal Crowns Using the Hall Technique.

Objectives: To evaluate the time taken and the mechanism through which the occlusion settles following the placement of a preformed metal crown (PMC) using the Hall technique. The secondary objective was to assess any temporo mandibular joint dysfunction (TMD) resulting from the Hall technique through a questionnaire. Study Design: 44 children fulfilling the inclusion criteria were evaluated for changes in overbite and occlusal vertical dimension (OVD) following the placement of preformed metal crowns (PMCs) using the Hall technique. The overbite and OVD measurements were taken before treatment, immediately post treatment, then at one, two, three and four weeks post treatment. After four weeks, a questionnaire recorded the occurrence of any signs or symptoms of TMD. Results: At the fourth week, the overbite measurement did not show a statistically significant difference (p value= 0.58) compared to baseline values indicating that the occlusion settled by the fourth week. By the third week the OVD values obtained did not show a significant difference compared to the baseline (p value= 0.42) indicating that the OVD had been restored. The questionnaire provided at the end of four weeks showed negative response for signs and symptoms of TMD in all the children. Conclusion: Any changes in occlusion following the placement of a Hall crown settles in four weeks. The OVD settles three weeks post placement implying that extrusion of teeth do not play a role in settling of the occlusion. The children do not develop any signs or symptoms of TMD post a Hall crown.

Evaluation of indirect pulp capping using pozzolan-based cement (ENDOCEM-Zr®) and mineral trioxide aggregate - A randomized controlled trial.

BACKGROUND: Pulp capping should always be considered as the primary treatment of choice for teeth without irreversible pulpitis in lesions approaching dental pulp. The predictability of vital pulp therapy has improved with the introduction of newer bioceramic materials. AIM: The purpose of this randomized controlled trial was to compare the outcomes of mineral trioxide aggregate (MTA) (Angelus, Londrina, Brazil) and a pozzolan-based cement (ENDOCEM-Zr® [Maruchi, Wonju, Korea]) as an indirect pulp capping (IPC) material. MATERIALS AND METHODS: IPC was performed in forty patients who were randomly divided into ENDOCEM-Zr® and MTA groups. The outcome was assessed using clinical and radiographic tests at different time intervals. The prognostic factors on the outcome of IPC were also evaluated. RESULTS AND CONCLUSIONS: The success rate of ENDOCEM-Zr® and MTA groups was 94.7% and 89.4%, respectively. The results were not statistically significant. Binary logical regression showed that the age of the patient and the status of the pulp before treatment were deciding variables for the outcome of the study. Therefore, it was concluded from the study that the evaluated pozzolan-based cement could be used as an alternative to MTA because of its faster setting time and lower discoloration potential. In addition, pulp capping should be performed with caution in individuals above 40 years and in teeth with reversible pulpitis.

Comparative Evaluation of Three Obturating Techniques in Primary Molars: An in Vivo Study.

Objectives: The purpose of this study was to evaluate and compare the quality of obturation between the two tested methods for root canal filling with a newer system in primary teeth. Study design: A total of 104 canals were prepared and obturated using zinc oxide eugenol paste. The three delivery systems compared were: Rotary lentulospiral and Navitip® withNavitip® Double Sideport. Radiographs were used to evaluate the canals for length of obturation and presence of voids. Results: The data were analyzed using chi-square tests. Significant differences was seen between the three groups for the presence of voids (p value =0.042) with less voids in Navitip® Double Sideport. There were no difference between the three groups for the extent of filling (p value=0.170). Conclusion- Navitip® Double Sideport showed the better results in terms of extent of obturation and absence of voids when compared to the Rotary lentulospiral and Navitip®.

Effect of silver diamine fluoride-potassium iodide and 2% chlorhexidine gluconate cavity cleansers on the bond strength and microleakage of resin-modified glass ionomer cement.

BACKGROUND: Disinfection of the prepared cavity can be a crucial step in the longevity of restorations. The objective of this study was to compare the antimicrobial action (AMA) of silver diamine fluoride-potassium iodide combination (SDF-KI) with 2% chlorhexidine gluconate (CHX) and to compare the alteration in bond strength and microleakage while using SDF-KI and CHX as cavity cleansers in resin-modified glass ionomer cement (RMGIC) restorations. MATERIALS AND METHODS: Samples were grouped as follows: Group 1: Polyacrylic acid (PAA), Group 2: CHX, Group 3: SDF-KI, and Group 4: Distilled water (CTRL). AMA was assessed by measuring the zone of inhibition of the above-mentioned materials by dispensing them into the punch hole prepared on agar plates with an inoculum of Streptococcus mutans. For assessing the effect of the cavity cleansers on the bond strength of RMGIC, they were applied to the dentinal samples prepared from freshly extracted noncarious molars. After the surface was treated, cylindrical restoration of RMGIC was placed and allowed to set. The shear bond strength was then evaluated using a universal testing machine. Rhodamine-B dye penetration was viewed under a fluorescent microscope to evaluate the microleakage of RMGIC following surface treatment of the standardized cavities prepared on the cervical third of freshly extracted noncarious premolars. RESULTS: SDF-KI (34 ± 0.8 mm) showed potent AMA followed by CHX (23.9 ± 0.7 mm) and PAA (12.7 ± 0.8 mm). SDF-KI showed a drastic increase in the bond strength when compared to the PAA, CHX, and CTRL groups. Although the application of SDF-KI showed the least microleakage among all the groups, it was not statistically significant. CONCLUSION: The application of SDF-KI and CHX is useful against S. mutans in an in vitro study. Although SDF-KI group showed the least microleakage among the groups, it was not statistically significant. SDF-KI application has shown a drastic increase in the bond strength of RMGIC although further research is required for the suitable reasoning of the phenomenon.

Comparison of Patient Comfort During the First Stage of Conventional Versus Modified Two-Stage Inferior Alveolar Nerve Blocks in Pediatric Patients.

Our aim was to compare the comfort of pediatric patients during the first stage of the conventional 2-stage inferior alveolar nerve block (IANB) versus the modified 2-stage IANB. This was a parallel group, single-blinded, randomized controlled trial. Pediatric patients meeting the inclusion criteria were randomly allocated to 1 of the 2 groups receiving IANB, group 1 (31 subjects) utilized a conventional 2-stage technique, and group 2 (33 subjects) utilized a modified 2-stage approach. Patient comfort was assessed indirectly by 2 observers using the Face, Legs, Activity, Cry, Consolability (FLACC) scale during the first stage of the injections. FLACC score data between the 2 groups were analyzed using the chi-square test, and interobserver reliability was measured using kappa statistics. During the first stage of the injections, lower FLACC scores of 0 indicating a relaxed/comfortable patient experience were found in 57.6% of group 2 subjects compared with only 25.8% group 1 subjects, which was a statistically significant difference (p-value .013). Interobserver reliability assessed using kappa coefficients (κ = 0.812) indicated excellent agreement. FLACC scores for the pediatric patients during the first stage of the modified 2-stage IANB technique were significantly lower than during the first stage of the conventional 2-stage IANB technique.

Effect of finishing/polishing techniques and time on surface roughness of esthetic restorative materials.

BACKGROUND: Surface roughness associated with improper finishing/polishing of restorations can result in plaque accumulation, gingival irritation, surface staining, and poor esthetic of restored teeth. The study aimed to evaluate the efficiency of various finishing and polishing systems and time using various procedures on surface roughness of some esthetic restorative materials. MATERIALS AND METHODS: In this in vitro study, samples of two composite materials, compomer and glass ionomer cement (GIC) materials, were fabricated. Finishing and polishing were done immediately (n = 40) and after 1 week (n = 40) using four systems (diamond bur + soflex discs; diamond bur + Astropol polishing brush; tungsten carbide bur + soflex discs; tungsten carbide bur + Astropol polishing brush). Surface roughness was measured using surface profilometer. Data were statistically analyzed by t-test (for each material and time period) and one-way analysis of variance followed by Tukey's post hoc (for finishing and polishing systems) at a significant level of P < 0.05. RESULTS: Analysis of time period, irrespective of finishing and polishing system showed that Ra values were greater (P < 0.05) in delayed polishing in GIC > Z100 > Filtek P90 > Dyract AP, suggesting immediate polishing is better. Among the materials, Filtek P90 had the least Ra values indicating the smoothest surface among all materials, followed by Z100, Dyract AP, and GIC. Comparison of polishing and finishing systems irrespective of materials showed that Ra values were lower (P > 0.05) in diamond + Astropol combination whereas diamond + soflex had the greatest Ra values. CONCLUSION: It might be concluded that: (i) Filtek P90 showed least Ra values followed by < Z100 < Dyract < GIC; (ii) immediate (24 h) finishing/polishing of materials is better than delayed; and (iii) among all these polishing systems, diamond bur-Astropol and Astrobrush showed good surface finish.

Evaluation of Plaque pH Changes Following Consumption of Health Drinks by Children: A Pilot Study.

INTRODUCTION: With increased trend among people to choose a healthy diet, there is an increased consumption of health drinks by children. Thus, it is important to know their cariogenicity. AIM: To evaluate the effect of consumption of health drinks viz., Horlicks, Boost and Complan on plaque pH in children. MATERIALS AND METHODS: The study consisted of four groups: Group I (control)- 10% sucrose solution, Group II- Horlicks, Group III- Boost, Group IV- Complan. Samples of plaque from representative teeth were collected and pH was measured using an electrode outside the mouth. After baseline pH was recorded, children were given their respective drinks and were asked to consume slowly over a period of three to five minutes following swish with 20 ml of the test drink for one minute. The pH was then recorded after 10, 20, 30, 40 and 60 minutes of the post consumption period. Obtained values were subjected to one-way ANOVA test for multiple group comparison followed by Post-Hoc Tukey's test for group wise comparison. RESULTS: Twenty minutes after consumption of Complan and Boost, pH was decreased, but not to the critical pH value as in case of sucrose. The pH was found to be slightly increased, 20 minutes post Horlicks consumption. Post 60 minutes consumption of all the drinks including sucrose solution, the pH was increased in comparison to post 20 minutes. However, 60 minutes post consumption of Boost and Horlicks, pH increased above the baseline. CONCLUSION: Consumption of health drinks viz., Complan and Boost did not lower the plaque pH to the level of critical pH. Consumption of Horlicks increased the plaque pH.

Dysgenetic Polycystic Disease of Minor Salivary Gland: A Rare Case Report and Review of the Literature.

Polycystic (dysgenetic) disease of the salivary glands is a rare entity that has only recently been described in the literature. The disease is more commonly seen in females and majority of the cases have presented as bilateral parotid gland swellings. This case presenting in a 21-year-old male is the first of this unusual entity involving solely the minor salivary gland on the lower lip. This case report highlights the importance for the clinician to be aware of this differential diagnosis, when treating an innocuous lesion like a mucocele.

Incidence of Opportunistic Infections among HIV-Positive Adults on Highly Active Antiretroviral Therapy in a Teaching Hospital, India: Prospective Study.

Oral manifestations in HIV infections are numerous and some of these are acknowledged as being of great importance in the early diagnosis of the disease. Many HIV-associated oral infections occur early in HIV disease, not infrequently as the presenting sign or symptom. Thus, early detection of the associated oral opportunistic infections should, in many cases, result in earlier diagnosis of HIV infection. Cytology, a simple, painless, and inexpensive method, has become a preferred method and was used in our study for early diagnosis of certain lesions. To determine the effect of highly active antiretroviral therapy on incidence rate of opportunistic infections among HIV-positive adults in a teaching hospital in India, a prospective study was conducted and the required sample size was 40. Study participants were selected randomly from the outpatient department of an HIV clinic who were currently on for antiretroviral therapy (ART). Data on age, gender, form of contagion, antiretroviral therapy at the time of review, number of CD4 lymphocytes per milliliter, and viral load were collected. Oral cytologic investigation was carried out and then stained for histopathological examination. A total of 40 individuals were examined and the incidence of opportunistic infections was 66.7% in individuals with CD4 counts less than 200, 55.6% in individuals with CD4 counts of 200 to 499, and 40.0% in individuals with CD4 counts more than 500. The incidence of opportunistic infection was higher in individuals with low CD4 counts in spite of being on ART.

Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions.

OBJECTIVE: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. MATERIALS AND METHODS: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. RESULTS: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 µg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 µg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 µg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 µg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P > 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. CONCLUSION: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins.