RESUMO
Decamethylcyclopentasiloxane (D5), a common ingredient in many personal care products (PCPs), undergoes oxidation in the atmosphere, leading to the formation of secondary organic aerosol (SOA). Yet, the specific contributions of D5-derived SOA on ambient fine particulate matter (PM2.5) have not been characterized. This study addresses this knowledge gap by introducing a new analytical method to advance the molecular characterization of oxidized D5 and its detection in ambient aerosol. The newly developed reversed phase liquid chromatography method, in conjunction with high-resolution mass spectrometry, separates and detects D5 oxidation products, enabling new insights into their molecular and isomeric composition. Application of this method to laboratory-generated SOA and urban PM2.5 in New York City expands the number of D5 oxidation products observed in ambient aerosol and informs a list of molecular candidates to track D5-derived SOA in the atmosphere. An oxidation series was observed in which one or more methyl groups in D5 (C10H30O5Si5) is replaced by a hydroxyl group, which indicates the presence of multistep oxidation products in ambient PM2.5. Because of their specificity to PCPs and demonstrated detectability in ambient PM2.5, several oxidation products are proposed as molecular tracers for D5-derived SOA and may prove useful in assessing the impact of PCPs-derived SOA in the atmosphere.
RESUMO
Volatile methyl siloxanes (VMS) are a group of organosilicon compounds of interest because of their potential health effects, their ability to form secondary organic aerosols, and their use as tracer compounds. VMS are emitted in the gas-phase from using consumer and personal care products, including deodorants, lotions, and hair conditioners. Because of this emission route, airborne concentrations are expected to increase with population density, although there are few studies in large urban centers. Here, we report summertime concentrations and daily variations of VMS congeners measured in New York City. Median concentrations of the 6 studied congeners, D3 (20 ng m-3), D4 (57 ng m-3), D5 (230 ng m-3), D6 (11 ng m-3), L5 (2.5 ng m-3), and L7 (1.3 ng m-3) are among the highest reported outdoor concentrations in the literature to date. Average congener ratios of D5:D4 and D5:D6 were consistent with previously reported emissions ratios, suggesting that concentrations were dominated by local emissions. Measured concentrations agree with previously published results from a Community Multiscale Air Quality model and support commonly accepted emissions rates for D4, D5, and D6 of 32.8, 135, and 6.1 mg per capita per day. Concentrations of D4, D5, D6, L5, and L7 and total VMS were significantly lower during the day than during the night, consistent with daytime oxidation reactivity. Concentrations of D3 did not show the same diurnal trend but exhibited a strong directional dependence, suggesting that it may be emitted by industrial point sources in the area rather than personal care product use. Concentrations of all congeners had large temporal variations but showed relatively weak relationships with wind speed, temperature, and mixing height.
Assuntos
Poluentes Atmosféricos , Monitoramento Ambiental , Siloxanas , Cidade de Nova Iorque , Siloxanas/análise , Poluentes Atmosféricos/análise , Indústrias , Humanos , Volatilização , Estações do Ano , Cosméticos/análise , Compostos Orgânicos Voláteis/análiseRESUMO
The quantification of aerosol size distributions is crucial for understanding the climate and health impacts of aerosols, validating models, and identifying aerosol sources. This work provides one of the first continuous measurements of aerosol size distribution from 1.02 to 8671 nm near the shore of Lake Michigan. The data were collected during the Lake Michigan Ozone Study (LMOS 2017), a comprehensive air quality measurement campaign in May and June 2017. The time-resolved (2-min) size distribution are reported herein alongside meteorology, remotely sensed data, gravimetric filters, and gas-phase variables. Mean concentrations of key aerosol parameters include PM2.5 (6.4 µg m-3), number from 1 to 3 nm (1.80x104 cm-3) and number greater than 3 nm (8x103 cm-3). During the field campaign, approximately half of days showed daytime ultrafine burst events, characterized by particle growth from sub 10 nm to 25-100 nm. A specific investigation of ultrafine lake spray aerosol was conducted due to enhanced ultrafine particles in onshore flows coupled with sustained wave breaking conditions during the campaign. Upon closer examination, the relationships between the size distribution, wind direction, wind speed, and wave height did not qualitatively support ultrafine particle production from lake spray aerosol; statistical analysis of particle number and wind speed also failed to show a relationship. The alternative hypothesis of enhanced ultrafine particles in onshore flow originating mainly from new particle formation activity is supported by multiple lines of evidence.
Assuntos
Poluentes Atmosféricos , Lagos , Lagos/análise , Tamanho da Partícula , Partículas e Gotas Aerossolizadas , Material Particulado/análise , Aerossóis/análise , Poluentes Atmosféricos/análise , Monitoramento AmbientalRESUMO
During the global spread of COVID-19, high demand and limited availability of melt-blown filtration material led to a manufacturing backlog of N95 Filtering Facepiece Respirators (FFRs). This shortfall prompted the search for alternative filter materials that could be quickly mass produced while meeting N95 FFR filtration and breathability performance standards. Here, an unsupported, nonwoven layer of uncharged polystyrene (PS) microfibers was produced via electrospinning that achieves N95 performance standards based on physical parameters (e.g., filter thickness) alone. PS microfibers 3-6 µm in diameter and deposited in an ~5 mm thick filter layer are favorable for use in FFRs, achieving high filtration efficiencies (≥97.5%) and low pressure drops (≤15 mm H2O). The PS microfiber filter demonstrates durability upon disinfection with hydroxyl radicals (â¢OH), maintaining high filtration efficiencies and low pressure drops over six rounds of disinfection. Additionally, the PS microfibers exhibit antibacterial activity (1-log removal of E. coli) and can be modified readily through integration of silver nanoparticles (AgNPs) during electrospinning to enhance their activity (≥3-log removal at 25 wt% AgNP integration). Because of their tunable performance, potential reusability with disinfection, and antimicrobial properties, these electrospun PS microfibers may represent a suitable, alternative filter material for use in N95 FFRs.
RESUMO
Ventilation plays an important role in mitigating the risk of airborne virus transmission in university classrooms. During the early phase of the COVID-19 pandemic, methods to assess classrooms for ventilation adequacy were needed. The aim of this paper was to compare the adequacy of classroom ventilation determined through an easily accessible, simple, quantitative measure of air changes per hour (ACH) to that determined through qualitative "expert judgment" and recommendations from the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), and the American Conference of Governmental Industrial Hygienists (ACGIH)®. Two experts, ventilation engineers from facilities maintenance, qualitatively ranked buildings with classrooms on campus with regard to having "acceptable classroom ventilation." Twelve lecture classrooms were selected for further testing, including a mix of perceived adequate/inadequate ventilation. Total air change per hour (ACH) was measured to quantitatively assess ventilation through the decay of carbon dioxide in the front and rear of these classrooms. The outdoor ACH was calculated by multiplying the total ACH by the outdoor air fraction. The classrooms in a building designed to the highest ASHRAE standards (62.1 2004) did not meet ACGIH COVID-19 recommendations. Four of the classrooms met the ASHRAE criteria. However, a classroom that was anticipated to fail based on expert knowledge met the ASHRAE and ACGIH criteria. Only two classrooms passed stringent ACGIH recommendations (outdoor ACH > 6). None of the classrooms that passed ACGIH criteria were originally expected to pass. There was no significant difference in ACH measured in the front and back of classrooms, suggesting that all classrooms were well mixed with no dead zones. From these results, schools should assess classroom ventilation considering a combination of classroom design criteria, expert knowledge, and ACH measurements.
Assuntos
Poluição do Ar em Ambientes Fechados , COVID-19 , Poluição do Ar em Ambientes Fechados/prevenção & controle , COVID-19/epidemiologia , Humanos , Pandemias , Instituições Acadêmicas , Universidades , Ventilação/métodosRESUMO
The Lake Michigan Ozone Study 2017 (LMOS 2017) in May and June 2017 enabled study of transport, emissions, and chemical evolution related to ozone air pollution in the Lake Michigan airshed. Two highly instrumented ground sampling sites were part of a wider sampling strategy of aircraft, shipborne, and ground-based mobile sampling. The Zion, Illinois site (on the coast of Lake Michigan, 67 km north of Chicago) was selected to sample higher NOx air parcels having undergone less photochemical processing. The Sheboygan, Wisconsin site (on the coast of Lake Michigan, 211 km north of Chicago) was selected due to its favorable location for the observation of photochemically aged plumes during ozone episodes involving southerly winds with lake breeze. The study encountered elevated ozone during three multiday periods. Daytime ozone episode concentrations at Zion were 60 ppb for ozone, 3.8 ppb for NOx, 1.2 ppb for nitric acid, and 8.2 µg m-3 for fine particulate matter. At Sheboygan daytime, ozone episode concentrations were 60 ppb for ozone, 2.6 ppb for NOx, and 3.0 ppb for NOy. To facilitate informed use of the LMOS 2017 data repository, we here present comprehensive site description, including airmass influences during high ozone periods of the campaign, overview of meteorological and pollutant measurements, analysis of continuous emission monitor data from nearby large point sources, and characterization of local source impacts from vehicle traffic, large point sources, and rail. Consistent with previous field campaigns and the conceptual model of ozone episodes in the area, trajectories from the southwest, south, and lake breeze trajectories (south or southeast) were overrepresented during pollution episodes. Local source impacts from vehicle traffic, large point sources, and rail were assessed and found to represent less than about 15% of typical concentrations measured. Implications for model-observation comparison and design of future field campaigns are discussed.Implications: The Lake Michigan Ozone Study 2017 (LMOS 2017) was conducted along the western shore of Lake Michigan, and involved two well-instrumented coastal ground sites (Zion, IL, and Sheboygan, WI). LMOS 2017 data are publicly available, and this paper provides detailed site characterization and measurement summary to enable informed use of repository data. Minor local source impacts were detected but were largely confined to nighttime conditions of less interest for ozone episode analysis and modeling. The role of these sites in the wider field campaign and their detailed description facilitates future campaign planning, informed data repository use, and model-observation comparison.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Ozônio , Poluentes Atmosféricos/análise , Poluição do Ar/análise , Monitoramento Ambiental , Lagos , Meteorologia , Michigan , Ozônio/análiseRESUMO
Daytime onshore lake breezes are a critical factor controlling ozone abundance at coastal sites around Lake Michigan. Coastal counties along the western shore of Lake Michigan have historically observed high ozone episodes dating to the 1970s. We classified ozone episode days based on the extent or absence of the lake breeze (i.e., "inland", "near-shore" or "no" lake breeze) to establish a climatology of these events. This work demonstrated variable gradients in ozone abundances based on these different types of meteorology, with the sharpest ozone concentration gradients on days with a near-shore lake breeze. On 76-82% of days in which ozone reached 70 ppb for at least 1 hour, a lake breeze was present. Evidence of ozone gradients from multiple observation platforms during the 2017 Lake Michigan Ozone Study (LMOS 2017) are shown for two days with different depths of lake breezes.
RESUMO
The Lake Michigan Ozone Study 2017 (LMOS 2017) was a collaborative multiagency field study targeting ozone chemistry, meteorology, and air quality observations in the southern Lake Michigan area. The primary objective of LMOS 2017 was to provide measurements to improve air quality modeling of the complex meteorological and chemical environment in the region. LMOS 2017 science questions included spatiotemporal assessment of nitrogen oxides (NO x = NO + NO2) and volatile organic compounds (VOC) emission sources and their influence on ozone episodes; the role of lake breezes; contribution of new remote sensing tools such as GeoTASO, Pandora, and TEMPO to air quality management; and evaluation of photochemical grid models. The observing strategy included GeoTASO on board the NASA UC-12 aircraft capturing NO2 and formaldehyde columns, an in situ profiling aircraft, two ground-based coastal enhanced monitoring locations, continuous NO2 columns from coastal Pandora instruments, and an instrumented research vessel. Local photochemical ozone production was observed on 2 June, 9-12 June, and 14-16 June, providing insights on the processes relevant to state and federal air quality management. The LMOS 2017 aircraft mapped significant spatial and temporal variation of NO2 emissions as well as polluted layers with rapid ozone formation occurring in a shallow layer near the Lake Michigan surface. Meteorological characteristics of the lake breeze were observed in detail and measurements of ozone, NOx, nitric acid, hydrogen peroxide, VOC, oxygenated VOC (OVOC), and fine particulate matter (PM2.5) composition were conducted. This article summarizes the study design, directs readers to the campaign data repository, and presents a summary of findings.
RESUMO
We present the development of a multiphase adjoint for the Community Multiscale Air Quality (CMAQ) model, a widely used chemical transport model. The adjoint model provides location- and time-specific gradients that can be used in various applications such as backward sensitivity analysis, source attribution, optimal pollution control, data assimilation, and inverse modeling. The science processes of the CMAQ model include gas-phase chemistry, aerosol dynamics and thermodynamics, cloud chemistry and dynamics, diffusion, and advection. Discrete adjoints are implemented for all the science processes, with an additional continuous adjoint for advection. The development of discrete adjoints is assisted with algorithmic differentiation (AD) tools. Particularly, the Kinetic PreProcessor (KPP) is implemented for gas-phase and aqueous chemistry, and two different automatic differentiation tools are used for other processes such as clouds, aerosols, diffusion, and advection. The continuous adjoint of advection is developed manually. For adjoint validation, the brute-force or finite-difference method (FDM) is implemented process by process with box- or column-model simulations. Due to the inherent limitations of the FDM caused by numerical round-off errors, the complex variable method (CVM) is adopted where necessary. The adjoint model often shows better agreement with the CVM than with the FDM. The adjoints of all science processes compare favorably with the FDM and CVM. In an example application of the full multiphase adjoint model, we provide the first estimates of how emissions of particulate matter (PM2.5) affect public health across the US.
RESUMO
To study the fate of cyclic volatile methyl siloxanes (cVMS) undergoing photooxidation in the environment and to assess the acute toxicity of inhaled secondary aerosols from cVMS, we used an oxidative flow reactor (OFR) to produce aerosols from oxidation of decamethylcyclopentasiloxane (D5). The aerosols produced from this process were characterized for size, shape, and chemical composition. We found that the OFR produced aerosols composed of silicon and oxygen, arranged in chain agglomerates, with primary particles of approximately 31â¯nm in diameter. Lung cells were exposed to the secondary organosilicon aerosols at estimated doses of 54-116â¯ng/cm2 using a Vitrocell air-liquid interface system, and organic gases and ozone exposure was minimized through a series of denuders. Siloxane aerosols were not found to be highly toxic.
Assuntos
Aerossóis/química , Pulmão/efeitos dos fármacos , Siloxanas/química , Células A549 , Aerossóis/toxicidade , Gases/química , Humanos , Pulmão/citologia , Oxirredução , Tamanho da Partícula , Siloxanas/toxicidadeRESUMO
Cyclic volatile methyl siloxanes (cVMS) are high-production chemicals present in many personal care products. They are volatile, hydrophobic, and relatively long-lived due to slow oxidation kinetics. Evidence from chamber and ambient studies indicates that oxidation products may be found in the condensed aerosol phase. In this work, we use an oxidation flow reactor to produce ~ 100 µgm-3 of organosilicon aerosol from OH oxidation of decamethyl-cyclopentasiloxane (D5) with aerosol mass fractions (i.e., yields) of 0.2-0.5. The aerosols were assessed for concentration, size distribution, morphology, sensitivity to seed aerosol, hygroscopicity, volatility and chemical composition through a combination of aerosol size distribution measurement, tandem differential mobility analysis, and electron microscopy. Similar aerosols were produced when vapor from solid antiperspirant was used as the reaction precursor. Aerosol yield was sensitive to chamber OH and to seed aerosol, suggesting sensitivity of lower-volatility species and recovered yields to oxidation conditions and chamber operation. The D5 oxidation aerosol products were relatively non-hygroscopic, with an average hygroscopicity kappa of ~ 0.01, and nearly non-volatile up to 190 °C temperature. Parameters for exploratory treatment as a semi-volatile organic aerosol in atmospheric models are provided.
RESUMO
Cyclic volatile methyl siloxanes (cVMSs) are important components in personal care products that transport and react in the atmosphere. Octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), dodecamethylcyclohexasiloxane (D6), and their gas-phase oxidation products have been incorporated into the Community Multiscale Air Quality (CMAQ) model. Gas-phase oxidation products, as the precursor to secondary organic aerosol from this compound class, were included to quantify the maximum potential for aerosol formation from gas-phase reactions with OH. Four 1-month periods were modeled to quantify typical concentrations, seasonal variability, spatial patterns, and vertical profiles. Typical model concentrations showed parent compounds were highly dependent on population density as cities had monthly averaged peak D5 concentrations up to 432ngm-3. Peak oxidized D5 concentrations were significantly less, up to 9ngm-3, and were located downwind of major urban areas. Model results were compared to available measurements and previous simulation results. Seasonal variation was analyzed and differences in seasonal influences were observed between urban and rural locations. Parent compound concentrations in urban and peri-urban locations were sensitive to transport factors, while parent compounds in rural areas and oxidized product concentrations were influenced by large-scale seasonal variability in OH.
RESUMO
This paper describes the development and implementation of an extendable aqueous-phase chemistry option (AQCHEM -KMT(I)) for the Community Multiscale Air Quality (CMAQ) modeling system, version 5.1. Here, the Kinetic PreProcessor (KPP), version 2.2.3, is used to generate a Rosenbrock solver (Rodas3) to integrate the stiff system of ordinary differential equations (ODEs) that describe the mass transfer, chemical kinetics, and scavenging processes of CMAQ clouds. CMAQ's standard cloud chemistry module (AQCHEM) is structurally limited to the treatment of a simple chemical mechanism. This work advances our ability to test and implement more sophisticated aqueous chemical mechanisms in CMAQ and further investigate the impacts of microphysical parameters on cloud chemistry. Box model cloud chemistry simulations were performed to choose efficient solver and tolerance settings, evaluate the implementation of the KPP solver, and assess the direct impacts of alternative solver and kinetic mass transfer on predicted concentrations for a range of scenarios. Month-long CMAQ simulations for winter and summer periods over the US reveal the changes in model predictions due to these cloud module updates within the full chemical transport model. While monthly average CMAQ predictions are not drastically altered between AQCHEM and AQCHEM-KMT, hourly concentration differences can be significant. With added in-cloud secondary organic aerosol (SOA) formation from biogenic epoxides (AQCHEM-KMTI), normalized mean error and bias statistics are slightly improved for 2-methyltetrols and 2-methylglyceric acid at the Research Triangle Park measurement site in North Carolina during the Southern Oxidant and Aerosol Study (SOAS) period. The added in-cloud chemistry leads to a monthly average increase of 11-18 % in "cloud" SOA at the surface in the eastern United States for June 2013.
RESUMO
Recent assessments have analyzed the health impacts of PM2.5 from emissions from different locations and sectors using simplified or reduced-form air quality models. Here we present an alternative approach using the adjoint of the Community Multiscale Air Quality (CMAQ) model, which provides source-receptor relationships at highly resolved sectoral, spatial, and temporal scales. While damage resulting from anthropogenic emissions of BC is strongly correlated with population and premature death, we found little correlation between damage and emission magnitude, suggesting that controls on the largest emissions may not be the most efficient means of reducing damage resulting from anthropogenic BC emissions. Rather, the best proxy for locations with damaging BC emissions is locations where premature deaths occur. Onroad diesel and nonroad vehicle emissions are the largest contributors to premature deaths attributed to exposure to BC, while onroad gasoline emissions cause the highest deaths per amount emitted. Emissions in fall and winter contribute to more premature deaths (and more per amount emitted) than emissions in spring and summer. Overall, these results show the value of the high-resolution source attribution for determining the locations, seasons, and sectors for which BC emission controls have the most effective health benefits.
Assuntos
Poluentes Atmosféricos/efeitos adversos , Modelos Teóricos , Mortalidade Prematura , Fuligem/efeitos adversos , Emissões de Veículos/toxicidade , Monitoramento Ambiental , Gasolina/efeitos adversos , Humanos , Estações do Ano , Estados UnidosRESUMO
In summer 2012, a landfill liner comprising an estimated 1.3 million shredded tires burned in Iowa City, Iowa. During the fire, continuous monitoring and laboratory measurements were used to characterize the gaseous and particulate emissions and to provide new insights into the qualitative nature of the smoke and the quantity of pollutants emitted. Significant enrichments in ambient concentrations of CO, CO2, SO2, particle number (PN), fine particulate (PM2.5) mass, elemental carbon (EC), and polycyclic aromatic hydrocarbons (PAH) were observed. For the first time, PM2.5 from tire combustion was shown to contain PAH with nitrogen heteroatoms (a.k.a. azaarenes) and picene, a compound previously suggested to be unique to coal-burning. Despite prior laboratory studies' findings, metals used in manufacturing tires (i.e. Zn, Pb, Fe) were not detected in coarse particulate matter (PM10) at a distance of 4.2 km downwind. Ambient measurements were used to derive the first in situ fuel-based emission factors (EF) for the uncontrolled open burning of tires, revealing substantial emissions of SO2 (7.1 g kg-1), particle number (3.5×1016 kg-1), PM2.5 (5.3 g kg-1), EC (2.37 g kg-1), and 19 individual PAH (totaling 56 mg kg-1). A large degree of variability was observed in day-to-day EF, reflecting a range of flaming and smoldering conditions of the large-scale fire, for which the modified combustion efficiency ranged from 0.85-0.98. Recommendations for future research on this under-characterized source are also provided.
RESUMO
The Iowa City Landfill in eastern Iowa, United States, experienced a fire lasting 18 days in 2012, in which a drainage layer of over 1 million shredded tires burned, generating smoke that impacted the surrounding metropolitan area of 130,000 people. This emergency required air monitoring, risk assessment, dispersion modeling, and public notification. This paper quantifies the impact of the fire on local air quality and proposes a monitoring approach and an Air Quality Index (AQI) for use in future tire fires and other urban fires. Individual fire pollutants are ranked for acute and cancer relative risks using hazard ratios, with the highest acute hazard ratios attributed to SO2, particulate matter, and aldehydes. Using a dispersion model in conjunction with the new AQI, we estimate that smoke concentrations reached unhealthy outdoor levels for sensitive groups out to distances of 3.1 km and 18 km at 24-h and 1-h average times, respectively. Modeled and measured concentrations of PM2.5 from smoke and other compounds such as VOCs and benzo[a]pyrene are presented at a range of distances and averaging times, and the corresponding cancer risks are discussed. Through reflection on the air quality response to the event, consideration of cancer and acute risks, and comparison to other tire fires, we recommend that all landfills with shredded tire liners plan for hazmat fire emergencies. A companion paper presents emission factors and detailed smoke characterization.
RESUMO
Haze is a serious air pollution problem in China, especially in Beijing and surrounding areas, affecting visibility, public health and regional climate. In this study, the Weather Research and Forecasting-Chemistry (WRF-Chem) model was used to simulate PM2.5 (particulate matters with aerodynamic diameter≤2.5 µm) concentrations during the 2013 severe haze event in Beijing, and health impacts and health-related economic losses were calculated based on model results. Compared with surface monitoring data, the model results reflected pollution concentrations accurately (correlation coefficients between simulated and measured PM2.5 were 0.7, 0.4, 0.5 and 0.6 in Beijing, Tianjin, Xianghe and Xinglong stations, respectively). Health impacts assessments show that the PM2.5 concentrations in January might cause 690 (95% confidence interval (CI): (490, 890)) premature deaths, 45,350 (95% CI: (21,640, 57,860)) acute bronchitis and 23,720 (95% CI: (17,090, 29,710)) asthma cases in Beijing area. Results of the economic losses assessments suggest that the haze in January 2013 might lead to 253.8 (95% CI: (170.2, 331.2)) million US$ losses, accounting for 0.08% (95% CI: (0.05%, 0.1%)) of the total 2013 annual gross domestic product (GDP) of Beijing.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar/estatística & dados numéricos , Exposição Ambiental/estatística & dados numéricos , Poluição do Ar/economia , China , Exposição Ambiental/economia , Humanos , Material Particulado/análise , Saúde PúblicaRESUMO
Nanoparticles are the largest fraction of aerosol loading by number. Knowledge of the chemical components present in nanoparticulate matter is needed to understand nanoparticle health and climatic impacts. In this work, we present field measurements using the Nano Aerosol Mass Spectrometer (NAMS), which provides quantitative elemental composition of nanoparticles around 20 nm diameter. NAMS measurements indicate that the element silicon (Si) is a frequent component of nanoparticles. Nanoparticulate Si is most abundant in locations heavily impacted by anthropogenic activities. Wind direction correlations suggest the sources of Si are diffuse, and diurnal trends suggest nanoparticulate Si may result from photochemical processing of gas phase Si-containing compounds, such as cyclic siloxanes. Atmospheric modeling of oxidized cyclic siloxanes is consistent with a diffuse photochemical source of aerosol Si. More broadly, these observations indicate a previously overlooked anthropogenic source of nanoaerosol mass. Further investigation is needed to fully resolve its atmospheric role.
Assuntos
Poluentes Atmosféricos/análise , Nanopartículas/química , Silício/análise , Aerossóis/química , Espectrometria de Massas , SiloxanasRESUMO
Predictive models of vehicular ultrafine particles less than 0.1 microm in diameter (UFPs*) and other urban pollutants with high spatial and temporal variation are useful and important in applications such as (1) decision support for infrastructure projects, emissions controls, and transportation-mode shifts; (2) the interpretation and enhancement of observations (e.g., source apportionment, extrapolation, interpolation, and gap-filling in space and time); and (3) the generation of spatially and temporally resolved exposure estimates where monitoring is unfeasible. The objective of the current study was to develop, test, and apply the Aerosol Screening Model (ASM), a new physically based vehicular UFP model for use in near-road environments. The ASM simulates hourly average outdoor concentrations of roadway-derived aerosols and gases. Its distinguishing features include user-specified spatial resolution; use of the Weather Research and Forecasting (WRF) meteorologic model for winds estimates; use of a database of more than 100,000 road segments in the Los Angeles, California, region, including freeway ramps and local streets; and extensive testing against more than 9000 hours of observed particle concentrations at 11 sites. After initialization of air parcels at an upwind boundary, the model solves for vehicle emissions, dispersion, coagulation, and deposition using a Lagrangian modeling framework. The Lagrangian parcel of air is subdivided vertically (into 11 levels) and in the crosswind direction (into 3 parcels). It has overall dimensions of 10 m (downwind), 300 m (vertically), and 2.1 km (crosswind). The simulation is typically started 4 km upwind from the receptor, that is, the location at which the exposure is to be estimated. As parcels approach the receptor, depending on the user-specified resolution, step size is decreased, and crosswind resolution is enhanced through subdivision of parcels in the crosswind direction. Hourly concentrations and size distributions of aerosols were simulated for 11 sites in the Los Angeles area with large variations in proximal traffic and particle number concentrations (ranging from 6000 to 41,000/cm3). Observed data were from the 2005-2007 Harbor Community Monitoring Study (HCMS; Moore et al. 2009), in Long Beach, California, and the Coronary Health and Air Pollution Study (CHAPS; Delfino et al. 2008), in the Los Angeles area. Meteorologic fields were extracted from 1-km-resolution meteorologic simulations, and observed wind direction and speed were incorporated. Using on-road and tunnel measurements, size-resolved emission factors ranging from 1.4 x 10(15) to 16 x 10(15) particles/kg fuel were developed specifically for the ASM. Four separate size-resolved emissions were used. Traffic and emission factors were separately estimated for heavy-duty diesel and light-duty vehicles (LDV), and both cruise and acceleration emission factors were used. The light-duty cruise size-resolved number emission factor had a single prominent mode at 12 nm. The diesel cruise size-resolved number emission factor was bimodal, with a large mode at 16 nm and a secondary mode at around 100 nm. Emitted particles were assumed to be nonvolatile. Data on traffic activity came from a 2008 travel-demand model, supplemented by data on diurnal patterns. Simulated ambient number size distributions and number concentrations were compared to observations taking into account estimated losses from particle transmission efficiency in instrument inlet tubing. The skill of the model in predicting number concentrations and size distributions was mixed, with some promising prediction features and some other areas in need of substantial improvement. For long-term (-15-day) average concentrations, the variability from site to site could be modeled with a coefficient of determination (r2) of 0.76. Model underprediction was more common than overprediction. The average of the absolute normalized bias was 0.30; in other words, long-term mean particle concentrations at each site were on average predicted to within 30% of the measured values. Observed 24-hour number concentrations were simulated to within a factor of 1.6 on 48% of days at HCMS sites and 81% at CHAPS sites, lower than the original design goal of 90%. Extensive evaluation of hourly concentrations, diurnal patterns, sizedistributions, and directional patterns was performed. At two sites with heavy freeway and heavy-duty-vehicle (HDV) influences and extensive size-resolved measurements, the ASM made significant errors in the diurnal pattern, concentration, and mode position of the aerosol size distribution. Observations indicated a shift in concentrations and size distributions corresponding to the afternoon development of offshore wind at the HCMS sites. The model did not reproduce the changes in particles associated with this wind shift and suffered from overprediction for particles of less than 15 nm and underprediction for particles of between 15 and 500 nm, raising doubt about the applicability of the HDV emission factors and the model's assumptions that particles were nonvolatile. The model's temporal prediction skill at individual monitoring sites was variable; the index of agreement (IOA) for hourly values at single sites ranged from 0.30 to 0.56. The model's ability to reproduce diurnal patterns in aerosol concentrations was site dependent; midday underprediction as well as underprediction for particle sizes greater than 15 nm were typical errors. Despite some problems in model skill, the number of time periods and locations evaluated as well as the extent of our qualitative and quantitative evaluations versus physical measurements well exceeded other published size-resolved modeling efforts. As a trial of a typical application, the sensitivity of the concentrations at each receptor site to LDV traffic, HDV traffic, and various road classes was evaluated. The sensitivity of overall particle numbers to all types of traffic ranged from 0.87 at the site with the heaviest traffic to 0.28 at the site with the lightest traffic, meaning that a 1% reduction in traffic could yield a reduction in particle number of 0.87% to 0.28%. Key conclusions and implications of the study are the following: 1. That variable-resolution (down to 10 m) modeling in a relatively simple framework is feasible and can support most of the applications mentioned above; 2. That model improvements will be required for some applications, especially in the areas of the HDV emission factor and the parameterization of meteorologic dispersion; 3. That particle loss from instrument transmission efficiency can be significant for particles smaller than 50 nm, and especially significant for particles smaller than 20 nm. In cases where loss corrections are not accounted for, or are inaccurate, this loss can cause disagreements in observation-model and observation-observation comparisons. 4. That LDV traffic exposures likely exceed HDV traffic exposures in some locations; 5. That variable step size and adaptive parcel width are critical to balancing computational efficiency and resolution; and 6. That the effects of roadways on air quality depend on both traffic volume and distance--in other words, low traffic volumes at close proximity need to be considered in health and planning studies just as much as do high traffic volumes at distances up to several kilometers. Future improvements to the model have been identified. They include improved emission factors; integration with the U.S. Environmental Protection Agency (EPA) Motor Vehicle Emission Simulator (MOVES) model; nesting with three-dimensional (3D) Eulerian models such as the Community Multi-scale Air Quality (CMAQ) model; increased emission dependence on acceleration, load, grade, and speed as well as evaporation and condensation of semivolatile aerosol species; and modeling of carbon dioxide (CO2) as an on-road and near-road dilution tracer. In addition, comparison with other statistically and physically based models would be highly beneficial.
Assuntos
Aerossóis/análise , Poluentes Atmosféricos/análise , Poluição do Ar/análise , Monitoramento Ambiental/métodos , Modelos Teóricos , Material Particulado/análise , Emissões de Veículos/análise , California , Humanos , Veículos Automotores , Tamanho da Partícula , Valor Preditivo dos Testes , Saúde da População UrbanaRESUMO
The organosilicon compounds octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) are high production volume chemicals that are widely used in household goods and personal care products. Due to their prevalence and chemical characteristics, cyclic siloxanes are being assessed as possible persistent organic pollutants. D4, D5, and D6 were measured in indoor and outdoor air to quantify and compare siloxane concentrations and compound ratios depending on location type. Indoor air samples had a median concentration of 2200 ng m(-3) for the sum of D4, D5, and D6. Outdoor sampling locations included downtown Chicago, Cedar Rapids, IA, and West Branch, IA, and had median sum siloxane levels of 280, 73, and 29 ng m(-3) respectively. A diurnal trend is apparent in the samples taken in downtown Chicago. Nighttime samples had a median 2.7 times higher on average than daytime samples, which is due, in part, to the fluctuations of the planetary boundary layer. D5 was the dominant siloxane in both indoor and outdoor air. Ratios of D5 to D4 averaged 91 and 3.2 for indoor and outdoor air respectively.