A Reaction-Based Optical Fingerprinting Strategy for the Recognition of Fat-Soluble Samples: Discrimination of Motor Oils.

Optical "fingerprints" are widely used for chemometrics-assisted recognition of samples of different types. An emerging trend in this area is the transition from obtaining "static" spectral data to reactions analyzed over time. Indicator reactions are usually carried out in aqueous solutions; in this study, we developed reactions that proceed in an organic solvent, thereby making it possible to recognize fat-soluble samples. In this capacity, we used 5W40, 10W40, and 5W30 motor oils from four manufacturers, with six samples in total. The procedure involved mixing a dye, sample, and reagents (HNO3, HCl, or tert-butyl hydroperoxide) in an ethanolic solution in a 96-well plate and measuring absorbance or near-infrared fluorescence intensity every several minutes for 20-55 min. The obtained photographic images were processed by linear discriminant analysis (LDA) and the k-nearest neighbors algorithm (kNN). Discrimination accuracy was evaluated by a validation procedure. A reaction of oxidation of a dye by nitric acid allowed us to recognize all six samples with 100% accuracy for LDA. Merging of data from the four reactions that did not provide complete discrimination ensured an accuracy of 93% for kNN. The newly developed indicator systems have good prospects for the discrimination of other fat-soluble samples. Overall, the results confirm the viability of the kinetics-based discrimination strategy.

Carbocyanine-Based Optical Sensor Array for the Discrimination of Proteins and Rennet Samples Using Hypochlorite Oxidation.

Optical sensor arrays are widely used in obtaining fingerprints of samples, allowing for solutions of recognition and identification problems. An approach to extending the functionality of the sensor arrays is using a kinetic factor by conducting indicator reactions that proceed at measurable rates. In this study, we propose a method for the discrimination of proteins based on their oxidation by sodium hypochlorite with the formation of the products, which, in turn, feature oxidation properties. As reducing agents to visualize these products, carbocyanine dyes IR-783 and Cy5.5-COOH are added to the reaction mixture at pH 5.3, and different spectral characteristics are registered every several minutes (absorbance in the visible region and fluorescence under excitation by UV (254 and 365 nm) and red light). The intensities of the photographic images of the 96-well plate are processed by principal component analysis (PCA) and linear discriminant analysis (LDA). Six model proteins (bovine and human serum albumins, γ-globulin, lysozyme, pepsin, and proteinase K) and 10 rennet samples (mixtures of chymosin and pepsin from different manufacturers) are recognized by the proposed method. The method is rapid and simple and uses only commercially available reagents.

Design of molecular beacons: 3' couple quenchers improve fluorogenic properties of a probe in real-time PCR assay.

Convenient preparation of fluorogenic hairpin DNA probes (molecular beacons) carrying a pair of FAM fluorophores (located close to 5'-terminus of the probe) or a pair of BHQ1 quenchers on 3'-terminus (with (BHQ1)2 or BHQ1-BHQ1 composition) is reported. These probes were used for the first time in a real-time PCR assay and showed considerable improvements in fluorogenic properties (the total fluorescence increase or signal-to-background ratio) in assay conditions vs. conventional one-FAM-one-BHQ1 molecular beacon probes as well as vs. hydrolyzable one-FAM-one-BHQ1 TaqMan probes. At the same time, such multiple modifications of the probe do not influence its Cq (a fractional PCR cycle used for quantification). The probe MB14 containing a BHQ1-BHQ1 pair showed a PCR fluorescence/background value of 9.6 which is more than two times higher than that of a regular probe MB2 (4.6). This study demonstrates prospects for the design of highly fluorogenic molecular beacon probes suitable for quantitative real-time PCR and for other potential applications (e.g. intracellular RNA detection and SNP/mutation analysis).

Non-nucleoside phosphoramidites of xanthene dyes (FAM, JOE, and TAMRA) for oligonucleotide labeling.

This unit describes the preparation of 5- and 6-carboxy derivatives of the xanthene fluorescent dyes fluorescein (FAM), 4',5'-dichloro-2',7'-dimethoxy-fluorescein (JOE), and tetramethylrhodamine (TAMRA) as individual isomers, and their conversion to non-nucleoside phosphoramidite reagents suitable for oligonucleotide labeling. The use of a cyclohexylcarbonyl (Chc) protecting group for blocking of phenolic hydroxyls facilitates the chromatographic separation of isomers of carboxy-FAM and carboxy-JOE as pentafluorophenyl esters. Acylation of 3-dimethylaminophenol with 1,2,4-benzenetricarboxylic anhydride gave a mixture of 4-dimethylamino-2-hydroxy-2',4'(5')-dicarboxybenzophenones, easily separable into individual compounds upon fractional crystallization. Individual isomeric benzophenones are precursors of 5- or 6-carboxytetramethylrhodamines. The dyes were converted into 6-aminohexanol- (JOE), 4-trans-aminocyclohexanol- (FAM and JOE), and hydroxyprolinol-based (TAMRA) phosphoramidite reagents.

4',5'-Dichloro-2',7'-dimethoxy-5(6)-carboxyfluorescein (JOE): synthesis and spectral properties of oligonucleotide conjugates.

A convenient procedure for the preparation of the fluorescent dye 4',5'-dichloro-2',7'-dimethoxy-5(6)-carboxyfluorescein (JOE) is reported; the overall yield achieved starting from isovanillin is 10 times higher (40% vs 4%) compared to the known procedure. Isomers (5- and 6-) are easily chromatographically separable as pentafluorophenyl esters of 3',6'-O-bis(cyclohexylcarbonyl) derivatives. Four non-nucleoside JOE phosphoramidites based on 5- and 6-isomers and flexible 6-aminohexanol (AH) or rigid 4-trans-aminocyclohexanol (ACH) linkers have been prepared and used for oligonucleotide labeling. Spectral and photophysical properties of 5'-JOE-modified oligonucleotides have been studied. Fluorescence quantum yield of the dye correlates with the nature of the linker (rigid vs flexible) and with the presence of dG nucleosides in close proximity to a JOE residue.

Practical synthesis of isomerically pure 5- and 6-carboxytetramethylrhodamines, useful dyes for DNA probes.

Simple and scalable synthesis of 5- and 6-carboxytetramethylrhodamines (TAMRAs) is reported. Acylation of 3-dimethylaminophenol with 1,2,4-benzenetricarboxylic anhydride afforded a mixture of 4-dimethylamino-2-hydroxy-2',4'(5')-dicarboxybenzophenones, which can be easily separated into individual compounds upon recrystallization from methanol and acetic acid. Individual benzophenones were reacted with 3-dimethylaminophenol to give 5- or 6-carboxytetramethylrhodamines. The dyes were converted into hydroxyprolinol-based phosphoramidite reagents suitable for oligonucleotide synthesis. 5- and 6-TAMRA isomers on oligonucleotides showed similar absorption and emission spectra. Fluorescence quantum yield of the dyes correlates with the presence of dG nucleosides in the adjacent region of oligonucleotide sequence. Several energy transfer primers containing on their 5'-termini (6-FAM)dT(n)(6-TAMRA) dye system (n = 0, 2, 4, 6, 8, 10, 12, 14) were prepared, and their spectral properties were studied.

Reactive trityl derivatives: stabilised carbocation mass-tags for life sciences applications.

The rational design of novel triarylmethyl (trityl)-based mass tags (MT) for mass-spectrometric (MS) applications is described. We propose a "pK(R+) rule" to correlate the stability of trityl carbocations with their MS performance: trityls with higher pK(R+) values ionise and desorb better. Trityl blocks were synthesised that have high pK(R+) values and are stable in conditions of MS analysis; these MTs can be ionised by matrix as well as irradiation with a 337 nm nitrogen laser. (13)C-Labelled tags were prepared for MS quantitation applications. Moreover, the tags were equipped with a variety of functional groups allowing conjugation with different functionalities within (bio)molecules to enhance the MS characteristics of the latter. The MS behaviour of model polycationic trityl compounds with and without the matrix was studied to reveal that poly-trityl clusters are always singly charged under the (MA)LDI-TOF conditions. Several peptide-trityl conjugates were prepared and comparisons revealed a beneficial effect of trityl tags on the conjugate detection in MS. Trityl compounds containing para-methoxy- and dimethylamine groups, as well as a xanthene fragment, showed considerable enhancement in MS detection of model peptides; thus they are promising tools for proteomic applications. Dimethoxytrityl derivatives allow one to distinguish between Arg- and Lys-containing peptides. Maleimido trityl derivatives are suitable for the efficient derivatisation of thiol-containing peptides in pyridine.

1-Phenylethynylpyrene (1-PEPy) as refined excimer forming alternative to pyrene: case of DNA major groove excimer.

1-Phenylethynylpyrene fluorochrome was studied as meta- and para-derivatives of arabino-uridine-2'-carbamates in ss and dsDNA. 1-PEPy showed red-shifted emission and increased fluorescence quantum yield compared to pyrene. Although 1-PEPy has very short excited lifetime (<2.5 ns), it is able to form inter- and intrastrand excimers on DNA, probably resulting from spatial preorganization of two dye molecules.

5(6)-carboxyfluorescein revisited: new protecting group, separation of isomers, and their spectral properties on oligonucleotides.

Pentafluorophenyl esters of 5- and 6-carboxyfluorescein-3',6'-O-dipivalate can be easily separated in multigram quantities by column chromatography. The individual isomers were converted into stable phosphoramidites suitable for oligonucleotide synthesis. The use of the cyclohexylcarbonyl (Chc) protecting group instead of pivaloyl (Piv) facilitates the separation of isomers. The fluorescence spectra of 5- and 6-carboxyfluoresceins on oligonucleotides were compared.

5-Arylethynyl-2'-deoxyuridines, compounds active against HSV-1.

Three new 5-arylethynyl-2'-deoxyuridines containing bulky aryls have been prepared and tested against HSV-1 in Vero cells. The introduction of a substituent in the phenyl group of an inactive compound, 5-phenylethynyl-2'-deoxyuridine, leads to the appearance of anti-HSV properties. The most active compounds are those containing a polycyclic aromatic hydrocarbon residue attached to the 5 position of 2'-deoxyuridine through a rigid triple bond.