RESUMO
Variant effect predictors assess if a substitution is pathogenic or benign. Most predictors, including those that are structure-based, are designed for globular proteins in aqueous environments and do not consider that the variant residue is located within the membrane. We report Missense3D-TM that provides a structure-based assessment of the impact of a missense variant located within a membrane. On a dataset of 2,078 pathogenic and 1,060 benign variants, spanning 711 proteins from 706 structures, Missense3D-TM achieved an accuracy of 66%, Mathews correlation coefficient of 0.37, sensitivity of 58% and specificity of 81%. Missense3D-TM performed similarly to mCSM-membrane: accuracy 66% vs 61% (p = 0.02) on an unbalanced test set and 70% vs 67% (p = 0.20) on a balanced test set. The Missense3D-TM website provides an analysis of the structural effects of the variant along with its predicted position within the membrane. The web server is available at http://missense3d.bc.ic.ac.uk/.
Assuntos
Proteínas de Membrana , Mutação de Sentido Incorreto , Domínios Proteicos , Imageamento Tridimensional , Conjuntos de Dados como Assunto , Proteínas de Membrana/química , Proteínas de Membrana/genéticaRESUMO
In 2019, we released Missense3D which identifies stereochemical features that are disrupted by a missense variant, such as introducing a buried charge. Missense3D analyses the effect of a missense variant on a single structure and thus may fail to identify as damaging surface variants disrupting a protein interface i.e., a protein-protein interaction (PPI) site. Here we present Missense3D-PPI designed to predict missense variants at PPI interfaces. Our development dataset comprised of 1,279 missense variants (pathogenic n = 733, benign n = 546) in 434 proteins and 545 experimental structures of PPI complexes. Benchmarking of Missense3D-PPI was performed after dividing the dataset in training (320 benign and 320 pathogenic variants) and testing (226 benign and 413 pathogenic). Structural features affecting PPI, such as disruption of interchain bonds and introduction of unbalanced charged interface residues, were analysed to assess the impact of the variant at PPI. The performance of Missense3D-PPI was superior to that of Missense3D: sensitivity 44 % versus 8% and accuracy 58% versus 40%, p = 4.23 × 10-16. However, the specificity of Missense3D-PPI was lower compared to Missense3D (84% versus 98%). On our dataset, Missense3D-PPI's accuracy was superior to BeAtMuSiC (p = 3.4 × 10-5), mCSM-PPI2 (p = 1.5 × 10-12) and MutaBind2 (p = 0.0025). Missense3D-PPI represents a valuable tool for predicting the structural effect of missense variants on biological protein networks and is available at the Missense3D web portal (http://missense3d.bc.ic.ac.uk).
Assuntos
Análise Mutacional de DNA , Proteínas , Software , Mutação de Sentido Incorreto , Proteínas/química , Proteínas/genética , Análise Mutacional de DNA/métodosRESUMO
We provide an overview of the methods that can be used for protein structure-based evaluation of missense variants. The algorithms can be broadly divided into those that calculate the difference in free energy (ΔΔG) between the wild type and variant structures and those that use structural features to predict the damaging effect of a variant without providing a ΔΔG. A wide range of machine learning approaches have been employed to develop those algorithms. We also discuss challenges and opportunities for variant interpretation in view of the recent breakthrough in three-dimensional structural modelling using deep learning.
Assuntos
Mutação de Sentido Incorreto , Proteínas , Proteínas/química , Algoritmos , Biologia Computacional/métodosRESUMO
Rapid progress in structural modeling of proteins and their interactions is powered by advances in knowledge-based methodologies along with better understanding of physical principles of protein structure and function. The pool of structural data for modeling of proteins and protein-protein complexes is constantly increasing due to the rapid growth of protein interaction databases and Protein Data Bank. The GWYRE (Genome Wide PhYRE) project capitalizes on these developments by advancing and applying new powerful modeling methodologies to structural modeling of protein-protein interactions and genetic variation. The methods integrate knowledge-based tertiary structure prediction using Phyre2 and quaternary structure prediction using template-based docking by a full-structure alignment protocol to generate models for binary complexes. The predictions are incorporated in a comprehensive public resource for structural characterization of the human interactome and the location of human genetic variants. The GWYRE resource facilitates better understanding of principles of protein interaction and structure/function relationships. The resource is available at http://www.gwyre.org.
Assuntos
Mapeamento de Interação de Proteínas , Proteínas , Software , Sítios de Ligação , Biologia Computacional/métodos , Bases de Dados de Proteínas , Humanos , Simulação de Acoplamento Molecular , Ligação Proteica , Mapeamento de Interação de Proteínas/métodos , Proteínas/químicaRESUMO
3DLigandSite is a web tool for the prediction of ligand-binding sites in proteins. Here, we report a significant update since the first release of 3DLigandSite in 2010. The overall methodology remains the same, with candidate binding sites in proteins inferred using known binding sites in related protein structures as templates. However, the initial structural modelling step now uses the newly available structures from the AlphaFold database or alternatively Phyre2 when AlphaFold structures are not available. Further, a sequence-based search using HHSearch has been introduced to identify template structures with bound ligands that are used to infer the ligand-binding residues in the query protein. Finally, we introduced a machine learning element as the final prediction step, which improves the accuracy of predictions and provides a confidence score for each residue predicted to be part of a binding site. Validation of 3DLigandSite on a set of 6416 binding sites obtained 92% recall at 75% precision for non-metal binding sites and 52% recall at 75% precision for metal binding sites. 3DLigandSite is available at https://www.wass-michaelislab.org/3dligandsite. Users submit either a protein sequence or structure. Results are displayed in multiple formats including an interactive Mol* molecular visualization of the protein and the predicted binding sites.
Assuntos
Bases de Dados de Proteínas , Proteínas , Sítios de Ligação , Ligantes , Aprendizado de Máquina , Ligação Proteica , Proteínas/químicaRESUMO
AlphaFold, the deep learning algorithm developed by DeepMind, recently released the three-dimensional models of the whole human proteome to the scientific community. Here we discuss the advantages, limitations and the still unsolved challenges of the AlphaFold models from the perspective of a biologist, who may not be an expert in structural biology.
Assuntos
Aprendizado Profundo , Conformação Proteica , Dobramento de Proteína , Algoritmos , Biologia Computacional , Bases de Dados Factuais , Humanos , Modelos Moleculares , Biologia Molecular , ProteomaAssuntos
Biologia Computacional , Biologia Molecular , Bases de Dados Genéticas , Genoma Humano , Humanos , SoftwareRESUMO
The interpretation of human genetic variation is one of the greatest challenges of modern genetics. New approaches are urgently needed to prioritize variants, especially those that are rare or lack a definitive clinical interpretation. We examined 10,136,597 human missense genetic variants from GnomAD, ClinVar and UniProt. We were able to perform large-scale atom-based mapping and phenotype interpretation of 3,960,015 of these variants onto 18,874 experimental and 84,818 in house predicted three-dimensional coordinates of the human proteome. We demonstrate that 14% of amino acid substitutions from the GnomAD database that could be structurally analysed are predicted to affect protein structure (n = 568,548, of which 566,439 rare or extremely rare) and may, therefore, have a yet unknown disease-causing effect. The same is true for 19.0% (n = 6266) of variants of unknown clinical significance or conflicting interpretation reported in the ClinVar database. The results of the structural analysis are available in the dedicated web catalogue Missense3D-DB ( http://missense3d.bc.ic.ac.uk/ ). For each of the 4 M variants, the results of the structural analysis are presented in a friendly concise format that can be included in clinical genetic reports. A detailed report of the structural analysis is also available for the non-experts in structural biology. Population frequency and predictions from SIFT and PolyPhen are included for a more comprehensive variant interpretation. This is the first large-scale atom-based structural interpretation of human genetic variation and offers geneticists and the biomedical community a new approach to genetic variant interpretation.
Assuntos
Mapeamento Cromossômico/métodos , Biologia Computacional/métodos , Bases de Dados Genéticas , Mutação de Sentido Incorreto/genética , Substituição de Aminoácidos/genética , Frequência do Gene/genética , Humanos , Conformação Proteica , Proteoma/genéticaRESUMO
BACKGROUND: Severe hypercholesterolemia (HC, LDL-C > 4.9 mmol/L) affects over 30 million people worldwide. In this study, we validated a new polygenic risk score (PRS) for LDL-C. METHODS: Summary statistics from the Global Lipid Genome Consortium and genotype data from two large populations were used. RESULTS: A 36-SNP PRS was generated using data for 2,197 white Americans. In a replication cohort of 4,787 Finns, the PRS was strongly associated with the LDL-C trait and explained 8% of its variability (p = 10-41 ). After risk categorization, the risk of having HC was higher in the high- versus low-risk group (RR = 4.17, p < 1 × 10-7 ). Compared to a 12-SNP LDL-C raising score (currently used in the United Kingdom), the PRS explained more LDL-C variability (8% vs. 6%). Among Finns with severe HC, 53% (66/124) versus 44% (55/124) were classified as high risk by the PRS and LDL-C raising score, respectively. Moreover, 54% of individuals with severe HC defined as low risk by the LDL-C raising score were reclassified to intermediate or high risk by the new PRS. CONCLUSION: The new PRS has a better predictive role in identifying HC of polygenic origin compared to the currently available method and can better stratify patients into diagnostic and therapeutic algorithms.
Assuntos
Hipercolesterolemia/genética , Herança Multifatorial , Polimorfismo de Nucleotídeo Único , Idoso , LDL-Colesterol/genética , Feminino , Finlândia , Humanos , Masculino , Pessoa de Meia-Idade , Estados UnidosRESUMO
Protein docking is essential for structural characterization of protein interactions. Besides providing the structure of protein complexes, modeling of proteins and their complexes is important for understanding the fundamental principles and specific aspects of protein interactions. The accuracy of protein modeling, in general, is still less than that of the experimental approaches. Thus, it is important to investigate the applicability of docking techniques to modeled proteins. We present new comprehensive benchmark sets of protein models for the development and validation of protein docking, as well as a systematic assessment of free and template-based docking techniques on these sets. As opposed to previous studies, the benchmark sets reflect the real case modeling/docking scenario where the accuracy of the models is assessed by the modeling procedure, without reference to the native structure (which would be unknown in practical applications). We also expanded the analysis to include docking of protein pairs where proteins have different structural accuracy. The results show that, in general, the template-based docking is less sensitive to the structural inaccuracies of the models than the free docking. The near-native docking poses generated by the template-based approach, typically, also have higher ranks than those produces by the free docking (although the free docking is indispensable in modeling the multiplicity of protein interactions in a crowded cellular environment). The results show that docking techniques are applicable to protein models in a broad range of modeling accuracy. The study provides clear guidelines for practical applications of docking to protein models.
Assuntos
Benchmarking/estatística & dados numéricos , Simulação de Acoplamento Molecular , Proteínas/química , Software , Sequência de Aminoácidos , Sítios de Ligação , Bases de Dados de Proteínas , Ligação Proteica , Estrutura Secundária de ProteínaRESUMO
Genome3D (https://www.genome3d.eu) is a freely available resource that provides consensus structural annotations for representative protein sequences taken from a selection of model organisms. Since the last NAR update in 2015, the method of data submission has been overhauled, with annotations now being 'pushed' to the database via an API. As a result, contributing groups are now able to manage their own structural annotations, making the resource more flexible and maintainable. The new submission protocol brings a number of additional benefits including: providing instant validation of data and avoiding the requirement to synchronise releases between resources. It also makes it possible to implement the submission of these structural annotations as an automated part of existing internal workflows. In turn, these improvements facilitate Genome3D being opened up to new prediction algorithms and groups. For the latest release of Genome3D (v2.1), the underlying dataset of sequences used as prediction targets has been updated using the latest reference proteomes available in UniProtKB. A number of new reference proteomes have also been added of particular interest to the wider scientific community: cow, pig, wheat and mycobacterium tuberculosis. These additions, along with improvements to the underlying predictions from contributing resources, has ensured that the number of annotations in Genome3D has nearly doubled since the last NAR update article. The new API has also been used to facilitate the dissemination of Genome3D data into InterPro, thereby widening the visibility of both the annotation data and annotation algorithms.
Assuntos
Proteínas/química , Bases de Dados de Proteínas , Proteínas/classificação , Proteínas/genética , Interface Usuário-ComputadorRESUMO
MOTIVATION: Integration of different omics data could markedly help to identify biological signatures, understand the missing heritability of complex diseases and ultimately achieve personalized medicine. Standard regression models used in Genome-Wide Association Studies (GWAS) identify loci with a strong effect size, whereas GWAS meta-analyses are often needed to capture weak loci contributing to the missing heritability. Development of novel machine learning algorithms for merging genotype data with other omics data is highly needed as it could enhance the prioritization of weak loci. RESULTS: We developed cNMTF (corrected non-negative matrix tri-factorization), an integrative algorithm based on clustering techniques of biological data. This method assesses the inter-relatedness between genotypes, phenotypes, the damaging effect of the variants and gene networks in order to identify loci-trait associations. cNMTF was used to prioritize genes associated with lipid traits in two population cohorts. We replicated 129 genes reported in GWAS world-wide and provided evidence that supports 85% of our findings (226 out of 265 genes), including recent associations in literature (NLGN1), regulators of lipid metabolism (DAB1) and pleiotropic genes for lipid traits (CARM1). Moreover, cNMTF performed efficiently against strong population structures by accounting for the individuals' ancestry. As the method is flexible in the incorporation of diverse omics data sources, it can be easily adapted to the user's research needs. AVAILABILITY AND IMPLEMENTATION: An R package (cnmtf) is available at https://lgl15.github.io/cnmtf_web/index.html. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.
Assuntos
Estudo de Associação Genômica Ampla , Aprendizado de Máquina , Redes Reguladoras de Genes , Genótipo , Humanos , Fenótipo , Polimorfismo de Nucleotídeo ÚnicoRESUMO
PhyreRisk is an open-access, publicly accessible web application for interactively bridging genomic, proteomic and structural data facilitating the mapping of human variants onto protein structures. A major advance over other tools for sequence-structure variant mapping is that PhyreRisk provides information on 20,214 human canonical proteins and an additional 22,271 alternative protein sequences (isoforms). Specifically, PhyreRisk provides structural coverage (partial or complete) for 70% (14,035 of 20,214 canonical proteins) of the human proteome, by storing 18,874 experimental structures and 84,818 pre-built models of canonical proteins and their isoforms generated using our in house Phyre2. PhyreRisk reports 55,732 experimentally, multi-validated protein interactions from IntAct and 24,260 experimental structures of protein complexes. Another major feature of PhyreRisk is that, rather than presenting a limited set of precomputed variant-structure mapping of known genetic variants, it allows the user to explore novel variants using, as input, genomic coordinates formats (Ensembl, VCF, reference SNP ID and HGVS notations) and Human Build GRCh37 and GRCh38. PhyreRisk also supports mapping variants using amino acid coordinates and searching for genes or proteins of interest. PhyreRisk is designed to empower researchers to translate genetic data into protein structural information, thereby providing a more comprehensive appreciation of the functional impact of variants. PhyreRisk is freely available at http://phyrerisk.bc.ic.ac.uk.
Assuntos
Biologia Computacional/métodos , Variação Genética , Proteínas/química , Genômica , Humanos , Conformação Proteica , Proteínas/genética , Proteínas/metabolismo , Proteômica , SoftwareRESUMO
Knowledge of protein structure can be used to predict the phenotypic consequence of a missense variant. Since structural coverage of the human proteome can be roughly tripled to over 50% of the residues if homology-predicted structures are included in addition to experimentally determined coordinates, it is important to assess the reliability of using predicted models when analyzing missense variants. Accordingly, we assess whether a missense variant is structurally damaging by using experimental and predicted structures. We considered 606 experimental structures and show that 40% of the 1965 disease-associated missense variants analyzed have a structurally damaging change in the mutant structure. Only 11% of the 2134 neutral variants are structurally damaging. Importantly, similar results are obtained when 1052 structures predicted using Phyre2 algorithm were used, even when the model shares low (<40%) sequence identity to the template. Thus, structure-based analysis of the effects of missense variants can be effectively applied to homology models. Our in-house pipeline, Missense3D, for structurally assessing missense variants was made available at http://www.sbg.bio.ic.ac.uk/~missense3d.