Lupin as Ingredient in Durum Wheat Breadmaking: Physicochemical Properties of Flour Blends and Bread Quality.

The popularity of adding pulse flours to baked goods is growing rapidly due to their recognised health benefits. In this study, increasing amounts (3, 7, 10, and 15%) of white lupin flour (Lupinus albus L.) and of protein concentrate from narrow-leaved lupin (Lupinus angustifolius L.) were used as replacements for durum wheat semolina to prepare bread, and their effects on the physicochemical properties of the flour blends, as well as the technological and sensory qualities of bread, were evaluated. The addition of protein concentrate from narrow-leaved lupin and white lupin flour increased the water binding capacity and the leavening rate compared to pure semolina. A farinograph test indicated that the dough development time had a slight but significant tendency to increase with the addition of lupin flour and protein concentrate of narrow-leaved lupin, while had a negative effect on the stability of dough. The alveograph strength decreased (225, 108, and 76 × 10-4 J for dough made with semolina, 15% of protein concentrate from narrow-leaved lupin, and 15% of white lupin flour, respectively), whereas there was an upward trend in the P/L ratio. Compared to re-milled semolina, the samples with lupin flour and protein concentrate from narrow-leaved lupin had low amylase activity, with falling number values ranging from 439 s to 566 s. The addition of the two different lupin flours lowered the specific volumes of the breads (2.85, 2.39, and 1.93 cm3/g for bread made from semolina, from 15% of protein concentrate from narrow-leaved lupin, and from 15% of white lupin flour, respectively) and increased their hardness values (up to 21.34 N in the bread with 15% of protein concentrate from narrow-leaved lupin). The porosity of the loaves was diminished with the addition of the two lupin flours (range of 5-8). The sensory analysis showed that the addition of white lupin flour or protein concentrate from narrow-leaved lupin did not impart any unpleasant flavours or odours to the bread. To conclude, the use of lupin in breadmaking requires adjustments to strengthen the gluten network but does not require a deflavouring process.

Artichoke Industrial Waste in Durum Wheat Bread: Effects of Two Different Preparation and Drying Methods of Flours and Evaluation of Quality Parameters during Short Storage.

'Violetto di Ramacca' is a local variety of artichoke grown in Sicily (Southern Italy), known for its purple color with green streaks. In this study, the effects of two different preparation and drying methods (method A, fresh sample oven-dried at 40 °C for 48 h then mixed and ground into flour; and B, minced and frozen sample oven-dried at 40 °C for 24 h then blended and ground into flour) for flours from different parts of the artichoke (bracts, stems, and mix), used at different percentages of integration (5, 7.5, and 10%), in combination with re-milled semolina, have been evaluated. The polyphenol contents of the flours produced with the two methods were measured. The results showed significant differences between the methods and samples, with a range from 9.09 mg GAE/g d.m. (bracts 100%, method A) to 2.62 mg/g (mix 100%, method B). The values were then lowered in the flour products with supplements ranging from 0.96 mg GAE/g (bract flour 10%, method A) to 0.11 mg GAE/g (mixed flour 7.5%, method B). As the amounts of polyphenols increased, the antioxidant activity increased, with a range that varied in the pure flour from 8.59 mg trolox eq/g d.m. (bract flour, method A) to 3.83 mg trolox eq/g d.m. (mixed flour, method B). These flours were also analyzed for color, highlighting a clear difference between methods A (greener) and B (browner). The flours thus obtained were used to produce breads, which were evaluated for their physicochemical characteristics during 4 days of storage. The results showed a reduction in volumes and heights, an increase in the percentage of integration of the artichoke flours, a greater quantity of moisture in the integrated breads, and a lower reduction in the structural characteristics during storage compared to the control breads. The TPA was conducted on the breads from T0 to T4, highlighting that, although initially more compact, the integrated breads offered less alteration of the values during storage. The aw ranged from 0.63 (mix flour 5%, method B) to 0.90 (bract flour 5%, method B). The amounts of polyphenols (from 0.57 mg GAE/g in bread with bracts at 10% (method A) to 0.13 mg GAE/g in bread with mix 5% (method B)) and the antioxidant activity (from 0.55 mg trolox eq/g d.m. in bread with bract flour 10% (method A) to 0.14% mg trolox eq/g d.m. in bread with mix flour) were also evaluated, showing a trend similar to the values obtained in the flours. Colorimetric tests highlighted a color more similar to wholemeal bread in the loaves produced with method B. Statistical factor analysis and cluster analysis were conducted for all trials.

Effects of Partial Replacement of Durum Wheat Re-Milled Semolina with Bean Flour on Physico-Chemical and Technological Features of Doughs and Breads during Storage.

The 'Signuredda' bean is a local genotype of pulse with particular technological characteristics, cultivated in Sicily, Italy. This paper presents the results of a study to evaluate the effects of partial substitutions of durum wheat semolina with 5%, 7.5%, and 10% of bean flour to prepare durum wheat functional breads. The physico-chemical properties and the technological quality of flours, doughs, and breads were investigated, as well as their storage process up to six days after baking. With the addition of bean flour, the proteins increased, as did the brown index, while the yellow index decreased. The water absorption and dough stability according to the farinograph increased from 1.45 in FBS 7.5%, to 1.65 in FBS 10%, for both 2020 and 2021, and from 5% to 10% supplementation for water absorption. Dough stability increased from 4.30 in FBS 5%-2021 to 4.75 in FBS 10%-2021. According to the mixograph, the mixing time also increased. The absorption of water and oil, as well as the leavening capacity, were also examined, and results highlighted an increase in the amount of water absorbed and a greater fermentation capacity. The greatest oil uptake was shown with bean flour at 10% supplementation (3.40%), while all bean flour mixes showed a water absorption of approximately 1.70%. The fermentation test showed the addition of 10% bean flour significantly increased the fermentative capacity of the dough. The color of the crumb was darker, while the crust became lighter. During the staling process, compared with the control sample, loaves with greater moisture and volume, and better internal porosity were obtained. Moreover, the loaves were extremely soft at T0 (8.0 versus 12.0 N of the control). In conclusion, the results showed an interesting potential of 'Signuredda' bean flour as a bread-making ingredient to obtain softer breads, which are better able to resist becoming stale.

Durum Wheat Bread with a Potentially High Health Value through the Addition of Durum Wheat Thin Bran or Barley Flour.

The enrichment of semolina bread with prebiotic ingredients such as ß-glucans may exert health-promoting effects. This work presents the results of a general recipe development aimed at improving the nutritional value of bakery products. In this study, increasing amounts (0%, 2%, 5%, 7%, and 10%) of thin bran or barley flour were added into re-milled durum wheat semolina to prepare breads. The technological quality of doughs and breads was investigated. In general, the Farinograph water absorption of flour and dough stability increased with increasing inclusion levels of barley flour or thin bran (up to 73.23% and 18.75 min, respectively), contrarily to the increase of dough development time only in barley inclusion (4.55 min). At the same time, the softening index decreased for almost all of these, except for 2% of thin bran or barley flour inclusion. At Mixograph, mixing time increased (up to 5.13 min) whilst the peak height decreased. The specific volume and hardness of loaf differently decreased for almost all thesis (ranges 12.6-24.0% and 39.4-45.5%, respectively). The other quality parameters remained unchanged compared with semolina bread. After baking, ß-glucan levels increased differently at all the inclusion levels (2.35-fold, on average). The breadcrumb color was deep brown, while the crust became lighter in color. The breads contain ß-glucans even at low percentages of barley/bran inclusions while maintaining their technological performance. In conclusion, the results show an interesting potential of barley flour or thin bran as ingredients in breadmaking to increase the ß-glucans daily intake, but further investigations are needed to achieve improved quality features.

Waste from Artichoke Processing Industry: Reuse in Bread-Making and Evaluation of the Physico-Chemical Characteristics of the Final Product.

A relevant amount of waste is produced in the canning industry of globe artichoke. This study proposes to use flours of artichoke waste (stems and bracts) in durum wheat bread-making, replacing the re-milled durum wheat semolina at increasing levels (5, 7.5 and 10 g/100 g). No study had evaluated this type of enrichment in durum wheat bread, widespread in the same area where artichoke waste is mostly produced. The replacement had a visible effect on the flour color, increasing a* and reducing b* and L*, and this was reflected in the color of bread crumb. The water absorption determined by farinography, dough development time and dough stability increased as the level of replacement increased (up to 71.2 g/100 g, 7.3 min and 18.4 min, respectively). The mixograph peak height and mixing time increased compared to control. The alveograph W decreased, while the P/L ratio increased. The artichoke waste-enriched breads had a lower volume (as low as 1.37 cm3/g) and were harder than control, but they did not show relevant moisture losses during five days of storage. The obtained data show therefore an interesting potential of artichoke waste flours in bread-making, but further investigations are needed for achieving improved quality features.

Assessment of quality-assured Tarocco orange fruit sorting rules by combined physicochemical and sensory testing.

BACKGROUND: The aim of this study was to extract a sorting rule for Tarocco orange fruit from several physicochemical and sensory tests performed on a marketable lot of 399 Tarocco orange fruits. RESULTS: The elastic tension at 5% strain (T5 ) was found to be linearly correlated (r = 0.65) with the Magness-Taylor (MT) index. Thus T5 was regarded as a non-destructive parameter quantifying fruit firmness and used to categorise the aforementioned lot in three different firmness classes, high (HF), medium (MF) and low (LF). Only the MT index, fruit rind thickness near the fruit peduncle, lightness coefficient and yellow/blue hue component of the orange flesh, as well as total soluble solid content, confirmed the validity of this discrimination at the significance level of 5%. Sensory professionals recognised the greater compactness (7 ± 2) but lower ease of peeling (4 ± 2) and segment separation (4 ± 2) of the HF oranges with respect to the corresponding sensory attributes of orange fruits grouped in the MF and LF classes. CONCLUSION: To limit the costly rejection of Tarocco orange fruit considered too soft, especially after long-term shipping, it would be reasonable to select only fruits characterised by a compressive force or tension at 5% strain in the range 23-41 N or 300-540 N m⁻¹ respectively.

Electronic nose application for determination of Penicillium digitatum in Valencia oranges.

BACKGROUND: Penicillium digitatum and Penicillium italicum are responsible for one the most serious diseases occurring during storage of citrus fruits. Its early detection allows a relevant increase in shelf life, and in situ monitoring of fungal infections represents a very efficient tool to improve storage quality. In the case of metabolic alterations due to physiological or fungal pathologies, olfactometric analysis allows the detection of specific volatile biomarkers, thus providing an effective tool for postharvest quality control of fruits and vegetables. RESULTS: A total of 300 Valencia oranges were analysed with an electronic nose and results were screened by a multivariate classification technique, partial least squares discriminant analysis, in order to investigate whether the electronic nose could distinguish between Penicillium-infected and non-infected samples and to evaluate the efficiency of the group classifications. High percentages of correct classification were obtained at low levels of infection (100% for 2-5% infection in an independent test). CONCLUSION: The electronic nose may be successfully applied as a reliable, non-destructive and non-contact indirect technology for the identification of fungal strains in storage rooms, especially when the infection occurs in small percentages that are not easily identifiable by classic methodologies of inspection.