Confinement of Sustainable Carbon Dots Results in Long Afterglow Emitters and Photocatalyst for Radical Photopolymerization.

Sustainable carbon dots based on cellulose, particularly carboxymethyl cellulose carbon dots (CMCCDs), were confined in an inorganic network resulting in CMCCDs@SiO2. This resulted in a material exhibiting long afterglow covering a time frame of several seconds also under air. Temperature-dependent emission spectra gave information on thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) while photocurrent experiments provided a deeper understanding of charge availability in the dark period, and therefore, its availability on the photocatalyst surface. The photo-ATRP initiator, ethyl α-bromophenylacetate (EBPA), quenched the emission from the millisecond to the nanosecond time frame indicating participation of the triplet state in photoinduced electron transfer (PET). Both free radical and controlled radical polymerization based on photo-ATRP protocol worked successfully. Metal-free photo-ATRP resulted in chain extendable macroinitiators based on a reductive mechanism with either MMA or in combination with styrene. Addition of 9 ppm Cu2+ resulted in Mw/Mn of 1.4 while an increase to 72 ppm improved uniformity of the polymers; that is Mw/Mn=1.03. Complementary experiments with kerria laca carbon dots confined materials, namely KCDs@SiO2, provided similar results. Deposition of Cu2+ (9 ppm) on the photocatalyst surface explains better uniformity of the polymers formed in the ATRP protocol.

Light-Mediated Polymerization Catalyzed by Carbon Nanomaterials.

Carbon nanomaterials, specifically carbon dots and carbon nitrides, play a crucial role as heterogeneous photoinitiators in both radical and cationic polymerization processes. These recently introduced materials offer promising solutions to the limitations of current homogeneous systems, presenting a novel approach to photopolymerization. This review highlights the preparation and photocatalytic performance of these nanomaterials, emphasizing their application in various polymerization techniques, including photoinduced i) free radical, ii) RAFT, iii) ATRP, and iv) cationic photopolymerization. Additionally, it discusses their potential in addressing contemporary challenges and explores prospects in this field. Moreover, carbon nitrides, in particular, exhibit exceptional oxygen tolerance, underscoring their significance in radical polymerization processes and allowing their applications such as 3D printing, surface modification of coatings, and hydrogel engineering.

A Porphyrin-Based Organic Network Comprising Sustainable Carbon Dots for Photopolymerization.

Sustainable carbon dots (CDs) based on furfuraldehyde (F-CD) resulted in a photosensitive material after pursuing the Alder-Longo reaction. The porphyrin moiety formed connects the F-CDs in a covalent organic network. This heterogeneous material (P-CD) was characterized by XPS indicating incorporation of the respective C, N and O moieties. Time resolved fluorescence including global analysis showed contribution of three linked components to the overall dynamics of the excited state. Electrochemical and photonic properties of this heterogeneous material facilitated photopolymerization in a photo-ATRP setup where either CuBr2 /TPMA, FeBr3 /Br- or a metal free reaction setup activated controlled polymerization. Chain extension experiments worked in all three cases showing end group fidelity for activation of controlled block copolymerization using MMA and styrene as monomers. Traditional radical polymerization using a diaryl iodonium salt as co-initiator failed.

The influence of the cation structure on the basicity-related polarity of ionic liquids.

UV/Vis absorption data of (E)-4-(2-[5-{4,4,5,5-tetramethyl-1,3,2-dioxaborolane-2-yl}thiene-2-yl]vinyl)-2-(dicyano-methylene)-3-cyano-5,5-dimethyl-2,5-dihydrofuran (ThTCF) as a solvatochromic probe is applied to examine the anion coordination strength (e.g. of N(CN)2, BF4, PF6, N(Tf)2, CF3COO) as a function of the cation structure of ionic liquids. Several 1-n-alky-3-methylimidazolium- and tetraalkylammonium CH3-NR3+-based ILs with different n-alkyl chain lengths (R = -C4H9, -C6H11, -C8H17, -C10H21) are considered. UV/Vis absorption data of ThTCF show subtle correlations with hydrogen bond accepting (HBA) ability-related measurands such as Kamlet-Taft ß, Freire's EHB, and Laurence ß1 parameter as a function of anion and cation structure. The different influence of the n-alkyl chain length of imidazolium- and tetraalkylammonium-based ILs on the dipolarity and HBA strength is confirmed by comparison with the 14N isotropic hyperfine coupling constants (Aiso) of a positively (CATI) and negatively charged spin probe (TSKCr) of TEMPO-type [(2,2,6,6-tetramethylpiperidin-1-yl)oxyl] and quantum chemically derived dipoles of the cations. The Aiso values correlate with the absorption energy of ThTCF and EHB, but in different ways depending on the anion or charge of the spin probe. In a final discussion of the ß, EHB, and ß1 scales in relation to ThTCF, the importance of the molar concentration N of ionic liquids for the physical significance of the respective parameters is discussed.

Rational Selection of Cyanines to Generate Conjugate Acid and Free Radicals for Photopolymerization upon Exposure at 860 nm.

Different cyanines absorbing in the NIR between 750 and 930 nm were applied to study the efficiency of both radical and cationic polymerization in combination with diaryliodonium salt. Variation of the connecting methine chain and structure of the terminal indolium moiety provided a deeper insight in the structure of the cyanine NIR-sensitizer and the efficiency to generate initiating radicals and conjugate acid. Photophysical studies were pursued by fluorescence spectroscopy providing a deeper understanding regarding the lifetime of the excited state and contribution of nonradiative deactivation resulting in generation of additional heat in the polymerization process. Furthermore, electrochemical experiments demonstrated connection to oxidation and reduction capability as influenced by the structural pattern of the sensitizer. LC-MS measurements provided a deeper pattern about the photoproducts formed. A nonamethine-based cyanine showed the best performance regarding bleaching in combination with an iodonium salt at 860 nm.

Distinct Sustainable Carbon Nanodots Enable Free Radical Photopolymerization, Photo-ATRP and Photo-CuAAC Chemistry.

Carbon nanodots (CDs) originating from different biomass result in different activities to sensitize photo-ATRP and photo-CuAAC reaction protocols with visible light. Free radical polymerization of tri(propylene glycol)diacrylate also exhibited a good efficiency using CDs in combination with an iodonium salt employing LEDs emitting either at 405 nm, 525 nm or 660 nm. Photo-ATRP experiments confirmed controlled polymerization conditions using CuII at the ppm scale resulting in dispersities between 1.06 to 1.10. Chain end fidelity was successfully provided by chain extension and block copolymerization additionally approving the living feature of polymerization using a CD synthesized from lac dye comprising olefinic moieties in the originating biomass. By global analysis, time resolved fluorescence measurements indicated the appearance of several emitting species contributing to the reactivity of the excited states. Different cytotoxic response appeared following the answer of MCF-10A cells in a flow cytometry assay; that is 400 µg mL-1 . Thus, cell viability was greater 80 % in the case of CD-2-CD-5 while that of CD-1 was close to 70 %.

NIR-Sensitized Cationic and Hybrid Radical/Cationic Polymerization and Crosslinking.

NIR-sensitized cationic polymerization proceeded with good efficiency, as was demonstrated with epoxides, vinyl ether, and oxetane. A heptacyanine functioned as sensitizer while iodonium salt served as coinitiator. The anion adopts a special function in a series selected from fluorinated phosphates (a: [PF6 ]- , b: [PF3 (C2 F5 )3 ]- , c: [PF3 (n-C4 F9 )3 ]- ), aluminates (d: [Al(O-t-C4 F9 )4 ]- , e: [Al(O(C3 F6 )CH3 )4 ]- ), and methide [C(O-SO2 CF3 )3 ]- (f). Vinyl ether showed the best cationic polymerization efficiency followed by oxetanes and oxiranes. DFT calculations provided a rough pattern regarding the electrostatic potential of each anion where d showed a better reactivity than e and b. Formation of interpenetrating polymer networks (IPNs) using trimethylpropane triacrylate and epoxides proceeded in the case of NIR-sensitized polymerization where anion d served as counter ion in the initiator system. No IPN was formed by UV-LED initiation using the same monomers but thioxanthone/iodonium salt as photoinitiator. Exposure was carried out with new NIR-LED devices emitting at either 805 or 870 nm.

NIR Light-Induced ATRP for Synthesis of Block Copolymers Comprising UV-Absorbing Moieties.

NIR exposure at 790 nm activated photopolymerization of monomers comprising UV-absorbing moieties by using [CuII /(TPMA)]Br2 (TPMA=tris(2-pyridylmethyl)amine) in the ppm range and an alkyl bromide as initiator. Some of them comprised structural elements selected either from those showing proton transfer or photocycloaddition upon UV excitation. Polymers obtained comprise living end groups serving as macroinitiator for controlled synthesis of block copolymers with relatively narrow molecular weight distributions. Chromatographic results indicated formation of block copolymers produced by this synthetic approach. Free-radical polymerization of monomers pursued for comparison exhibited the expected broader dispersity of molecular weight compared to photo-ATRP. Polymerization of these monomers by UV photo-ATRP failed on the contrary to NIR photo-ATRP demonstrating the UV-filter function of the monomers. This work conclusively provides a new approach for the polymerization of monomers comprising UV-absorbing moieties through photo-ATRP in the NIR region. This occurred in a simple and efficient pathway. However, studies also showed that not all monomers chosen successfully proceeded in the NIR photo-ATRP protocol.

Charge transport and glassy dynamics in polymeric ionic liquids as reflected by their inter- and intramolecular interactions.

Polymeric ionic liquids (PILs) form a novel class of materials in which the extraordinary properties of ionic liquids (ILs) are combined with the mechanical stability of polymeric systems qualifying them for multifold applications. In the present study broadband dielectric spectroscopy (BDS), Fourier transform infrared spectroscopy (FTIR), AC-chip calorimetry (ACC) and differential scanning calorimetry (DSC) are combined in order to unravel the interplay between charge transport and glassy dynamics. Three low molecular weight ILs and their polymeric correspondents are studied with systematic variations of anions and cations. For all examined samples charge transport takes place by glassy dynamics assisted hopping conduction. In contrast to low molecular weight ILs the thermal activation of DC conductivity for the polymeric systems changes from a Vogel-Fulcher-Tammann- to an Arrhenius-dependence at a (sample specific) temperature Tσ0. This temperature has been widely discussed to coincide with the glass transition temperature Tg, a refined analysis, instead, reveals Tσ0 of all PILs under study at up to 80 K higher values. In effect, below the Tσ0 charge transport in PILs becomes more efficient - albeit on a much lower level compared to the low molecular weight pendants - indicating conduction paths along the polymer chain. This is corroborated by analysing the temperature dependence of specific IR-active vibrations showing at Tσ0 distinct changes in the spectral position and the oscillator strength, whereas other molecular units are not affected. This leads to the identification of charge transport responsive (CTR) as well as charge transport irresponsive (CTI) moieties and paves the way to a refined molecular understanding of electrical conduction in PILs.

Another fatal case related to the recreational abuse of U-47700.

The abuse of synthetic opioids has become a major threat in recent years. Several clinical reports and fatal case reports exist discussing life-threatening hypoventilation and fatal respiratory depression following the abuse of trans-3,4-dichloro-N-(2-(dimethylamino)cyclohexyl)-N-methylbenzamide (U-47700). The reported concentration of U-47700 in peripheral blood varies between 0.01 µg/mL and 1.46 µg/mL. These values depend on the mode of administration and whether the drug was used in combination with other drugs and/or pharmaceuticals. In the past, U-47700 was predominantly insufflated and not injected. The current study presents a non-targeted liquid chromatography/mass spectrometry (LC/MS)-based screening approach of urine and cerebrospinal fluid samples after intravenous injection of U-47700. Furthermore, quantitative values on U-47700 as obtained by liquid chromatography coupled to a linear ion trap (LC/ESI-QTRAPMS) are presented concerning femoral blood (0.29 µg/mL), urine (0.24 µg/mL), gastric contents (0.57 µg/mL), bile fluid (2.3 µg/mL), heart blood (1.25 µg/mL), liver (9.9 µg/g), cerebrospinal fluid (0.4 µg/mL), and hair (0.14 ng/mg). Thereof, concentrations in hair, gastric contents, bile fluid and cerebrospinal fluid have never been reported before. Drug paraphernalia were also analyzed by liquid chromatography coupled to a diode array detector (LC/DAD) and nuclear magnetic resonance spectrometer (NMR). The analyses show that the powder had a relatively high purity and was adulterated to a low degree. This is the first case report which lists concentration distributions of various specimens after intravenous injection. These findings as well as the U-47700 concentration are important to evaluate autopsy cases of U-47700 intoxication in the future.

Near-Infrared Sensitized Photoinduced Atom-Transfer Radical Polymerization (ATRP) with a Copper(II) Catalyst Concentration in the ppm Range.

NIR-sensitized photoinduced atom-transfer radical polymerization (ATRP) is possible by using ppm of CuII /tris(2-pyridylmethyl)amine (TPMA) as the catalyst, a polymethine as the photosensitizer, and α-bromophenylacetate as the alkyl halide initiator. Among the polymethines investigated with cationic, zwitterionic, or anionic structures, only the zwitterionic 2 exhibited sensitization activity under NIR light at room temperature resulting in the formation of polymers with controlled molecular weight characteristics and functionalities. The barbital group placed at the meso-position of 2 caused the activity in this photo-ATRP framework. The chain-end fidelity of the polymers was confirmed by chain extension and block copolymerization experiments. The polymerization system exhibits high photostability under NIR light exposure and irradiation dependency as demonstrated by light on/off experiments.

Photogenerated lophyl radicals in 1-alkyl-3-vinylimidazolium bis(trifluoromethylsulfonyl)imides.

1-Alkyl-3-vinylimidazolium bis(trifluoromethylsulfonyl)imides were investigated as a matrix for photogenerated lophyl radicals obtained by irradiation of o-chlorohexaarylbisimidazole (o-Cl-HABI). Photoinduced polymerization of ionic liquid monomers using the photoinitiator system composed of o-Cl-HABI and 3-mercapto-1,2,4-4H-triazole was investigated by photo-DSC. Selected thermal properties and viscosity of these ionic liquid monomers are important to understand the lophyl radical kinetics after exposure. Solvent cage effects and viscosity of the ionic liquid monomers strongly affect radical recombination in the dark. This was investigated at different temperatures. The rate constant for radical recombination (krec) decreases from the methyl to the butyl substituted ionic liquid monomer. This may be attributed to an increasing viscosity with increasing size of the alkyl substituent. However, further increase in the size of the alkyl substituent from a butyl to a heptyl group bound at the imidazolium ion results in an increase of krec although the viscosity does further increase. Therefore, a minimum in krec was found for the butyl substituted ionic liquid monomer. Furthermore, the Eyring parameters indicated a dependence on the chain length of the alkyl substituent bound at the imidazolium ion while the activation energy of the viscous flow only slightly changes. Furthermore, the size of the alkyl substituent bound at the cation of the ionic liquid monomers strongly influences both solvent cage and viscosity, and therefore, the concentration of lophyl radicals during photoinduced generation. Photo-induced polymerization of the ionic liquid monomers is affected by viscosity at low conversion and by vitrification at higher conversion. The latter is important for application of the ionic liquid monomers and the polymers made from them by photoinduced polymerization.

Ion transport and softening in a polymerized ionic liquid.

Polymerized ionic liquids (PolyILs) are promising materials for various solid state electronic applications such as dye-sensitized solar cells, lithium batteries, actuators, field-effect transistors, light emitting electrochemical cells, and electrochromic devices. However, fundamental understanding of interconnection between ionic transport and mechanical properties in PolyILs is far from complete. In this work, local charge transport and structural changes in films of a PolyIL are studied using an integrated experiment-theory based approach. Experimental data for the kinetics of charging and steady state current-voltage relations can be explained by taking into account the dissociation of ions under an applied electric field (known as the Wien effect). Onsager's theory of the Wien effect coupled with the Poisson-Nernst-Planck formalism for the charge transport is found to be in excellent agreement with the experimental results. The agreement between the theory and experiments allows us to predict structural properties of the PolyIL films. We have observed significant softening of the PolyIL films beyond certain threshold voltages and formation of holes under a scanning probe microscopy (SPM) tip, through which an electric field was applied. The observed softening is explained by the theory of depression in glass transition temperature resulting from enhanced dissociation of ions with an increase in applied electric field.

Imidazolium 2-substituted 4,5-dicyanoimidazolate ionic liquids: synthesis, crystal structures and structure-thermal property relationships.

Thirty six novel ionic liquids (ILs) with 1-butyl-3-methylimidazolium and 3-methyl-1-octylimidazolium cations paired with 2-substitited 4,5-dicyanoimidazolate anions (substituent at C2 = chloro, bromo, methoxy, vinyl, amino, methyl, ethyl, propyl, isopropyl, butyl, pentyl, hexyl, heptyl, octyl, nonyl, decyl, undecyl and phenyl) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and single-crystal X-ray crystallography. The effects of cation and anion type and structure on the thermal properties of the resulting ionic liquids, including several room temperature ionic liquids (RTILs) are examined and discussed. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of -22 to -68 °C. The effects of alkyl substituents of the imidazolate anion reflected the crystallization, melting points and thermal decomposition of the ILs. The Coulombic packing force, van der Waals forces and size of the anions can be considered for altering the thermal transitions. Three crystal structures of the ILs were determined and the effects of changes to the cations and anions on the packing of the structure were investigated.

Extended mechanistic aspects on photoinitiated polymerization of 1,6-hexanediol diacrylate by hexaarylbisimidazoles and heterocyclic mercapto compounds.

Chlorine substituted hexaarylbisimidazole (o-Cl-HABI) efficiently initiates radical polymerization of multifunctional acrylic esters in the presence of a heterocyclic mercapto compound if the latter can form its tautomeric thione. Exposure of o-Cl-HABI results in lophyl radicals, which efficiently add to the thione in the first step while the second step releases a highly reactive thiyl radical from this intermediate. LC-MS and CID-MS measurements support this reaction scheme. Furthermore, photo-DSC experiments applying UV light between 320 and 380 nm showed that mercaptotriazole and phenylmercaptotriazole exhibited the best reactivity in the monomer 1,6-hexanediol diacrylate (HDDA) while alkyl substituted mercaptotriazoles showed less reactivity. Change of the triazole heterocycle by mercaptoimidazole resulted in a significant decrease of photoinitiation efficiency. This heterocycle does not form the corresponding thione in HDDA as shown by NMR measurements. Replacement of mercaptotriazole by an alkylthiol leads to a system showing the lowest photoinitiation efficiency in this series. Formation of thione structure in the case of heterocyclic mercapto compounds may cause higher reactivity of the heterocyclic mercapto compounds with the lophyl radical in the monomer chosen.

Recombination of lophyl radicals in pyrrolidinium-based ionic liquids.

The recombination of photolytically generated lophyl radicals has been investigated by UV/Vis spectroscopy in 1-alkyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imides (NTf2) in comparison with 1-butyl-3-methylimidazolium NTf2 , dimethyl sulfoxide, and triacetin. The 1-alkyl-1-methylpyrrolidinium-based ionic liquids contain an alkyl substituent varying between butyl and decyl groups. Optically pure ionic liquids are used in these studies. Temperature-dependent investigation of lophyl radical recombination shows an increase in the radical recombination rate with increasing temperature in each solvent, which is caused by decreasing viscosity with increasing temperature. Furthermore, the viscosity of the 1-alkyl-1-methylpyrrolidinium NTf2 increases nearly linearly within the row of these ionic liquids. In contrast, the recombination of the photolytically generated lophyl radicals is significantly faster in the ionic liquids than in the traditional organic solvents under investigation. Moreover, the recombination rate increases with the length of the alkyl chain bound at the cation of the ionic liquid at a given temperature. This may be caused by an increase in the extent of lophyl radical recombination within the solvent cage. Solvent cage effects dominate in the case of lophyl radical recombination in ionic liquids bearing a long alkyl chain or if the temperature is near the melting temperature of the ionic liquid. The positive value of the activation entropy supports this hypothesis. The results obtained are important for discussion of bimolecular radical reactions in ionic liquids.

Radicals in ionic liquids.

Stable radicals and recombination of photogenerated lophyl radicals are investigated in ionic liquids. The 2,2,6,6-tetramethylpiperidine-1-yloxyl derivatives contain various substituents at the 4-position to the nitroxyl group, including hydrogen-bond-forming or ionic substituents that undergo additional interactions with the individual ions of the ionic liquids. Some of these spin probes contain similar ions to ionic liquids to avoid counter-ion exchange with the ionic liquid. Depending on the ionic liquid anion, the Stokes-Einstein theory or the Spernol-Gierer-Wirtz theory can be applied to describe the temperature dependence of the average rotational correlation time of the spin probe in the ionic liquids. Furthermore, the spin probes give information about the micropolarity of the ionic liquids. In this context the substituent at the 4-position to the nitroxyl group plays a significant role. Covalent bonding of a spin probe to the imidazolium ion results in bulky spin probes that are strongly immobilized in the ionic liquid. Furthermore, lophyl radical recombination in the dark, which is chosen to understand the dynamics of bimolecular reactions in ionic liquids, shows a slow process at longer timescale and a rise time at a shorter timescale. Although various reactions may contribute to the slower process during lophyl radical recombination, it follows a second-order kinetics that does not clearly show solvent viscosity dependence. However, the rise time, which may be attributed to radical pair formation, increases with increasing solvent viscosity.

Temperature dependence of interactions between stable piperidine-1-yloxyl derivatives and a semicrystalline ionic liquid.

The stable 2,2,6,6-tetramethylpiperidine-1-yloxyl and its derivatives with hydrogen-bond-forming (-OH, -OSO(3)H), anionic (-OSO(3) (-) bearing K(+) or [K(18-crown-6)](+) as counter ion), or cationic (-N(+)(CH(3))(3) bearing I(-), BF(4) (-), PF(6) (-) or N(-)(SO(2)CF(3))(2) as counter ion) substituents are investigated in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide over a wide temperature range. The temperature dependence of the viscosity of the ionic liquid is well described by the Vogel-Fulcher-Tammann equation. Interestingly, the temperature dependence of the rotational correlation time of the spin probes substituted with either a hydrogen-bond-forming group or an ionic substituent can be described using the Stokes-Einstein equation. In contrast, the temperature dependence of the rotational correlation time of the spin probe without an additional substituent at the 4-position to the nitroxyl group does not follow this trend. The activation energy for the mobility of the unsubstituted spin probe, determined from an Arrhenius plot of the spin-probe mobility in the ionic liquid above the melting temperature, is comparable with the activation energy for the viscous flow of the ionic liquid, but is higher for spin probes bearing an additional substituent at the 4-position. Quantum chemical calculations of the spin probes using the 6-31G+d method give information about the rotational volume of the spin probes and the spin density at the nitrogen atom of the radical structure as a function of the substituent at the spin probes in the presence and absence of a counter ion. The results of these calculations help in understanding the effect of the additional substituent on the experimentally determined isotropic hyperfine coupling constant.

Influence of imidazolium bis(trifluoromethylsulfonylimide)s on the rotation of spin probes comprising ionic and hydrogen bonding groups.

The influence of the alkyl chain length in 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonylimide)s is studied to explore the rotation of piperidine-1-yloxyl derivatives substituted with either hydrogen bonding hydroxy group or ionic substituents, such as the cationic trimethylammonium or the anionic sulfate group placed at the 4 position. Structural variation of the ionic liquids results in differences of their viscosity influencing the rotation of the spin probes. The size of the average rotational correlation times of the spin probes dissolved in the ionic liquids depends further on the additional substituent in 4-position at these spin probes. The rotational correlation time exhibits a linear dependence on the ionic liquid viscosity in the case of the spin probe forming hydrogen bonding with the ionic liquids. In contrast to this, a deviation from the Stokes-Einstein behavior is found in the case of rotation of the charged spin probes in the 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonylimide)s substituted with a longer alkyl chain. This effect may be explained by phase separation on a molecular level between the charged part of the ionic liquid and the longer alkyl chains bound at the imidazolium ion. Although the neutral and the cationic spin probes show only a slight dependence between ionic liquid structure variation and the hyperfine coupling constants, structural effects cause changes in the hyperfine coupling constants in the case of the anionic spin probes. These probes strongly interact with the imidazolium ion.

Recombination of photogenerated lophyl radicals in imidazolium-based ionic liquids.

Laser flash photolysis is applied to study the recombination reaction of lophyl radicals in ionic liquids in comparison with dimethylsulfoxide as an example of a traditional organic solvent. The latter exhibits a similar micropolarity as the ionic liquids. The ionic liquids investigated are 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (1), 1-hexyl-3-methylimidazolium hexafluorophosphate (2), and 1-butyl-3-methylimidazolium tetafluoroborate (3). The recombination of the photolytic generated lophyl radicals occur significantly faster in the ionic liquids than expected from their macroscopic viscosities and is a specific effect of these ionic liquids. On the other hand, this reaction can be compared with the macroscopic viscosity in the case of dimethylsulfoxide. Activation parameters obtained for lophyl radical recombination suggest different, anion-dependent mechanistic effects. Quantum chemical calculations based on density functional theory provide a deeper insight of the molecular properties of the lophyl radical and its precursor. Thus, excitation energies, spin densities, molar volumes, and partial charges are calculated. Calculations show a spread of spin density over the three carbon atoms of the imidazolyl moiety, while only low spin density is calculated for the nitrogens.