Block Sequence Effects on the Self-Assembly Behaviors of Polypeptide-Based Penta-Block Copolymer Hydrogels.

Peptide-based hydrogels have great potential for applications in tissue engineering, drug delivery, and so on. We systematically synthesize, characterize, and investigate the self-assembly behaviors of a series of polypeptide-based penta-block copolymers by varying block sequences and lengths. The copolymers contain hydrophobic blocks of poly(γ-benzyl-l-glutamate) (PBG, Bx) and two kinds of hydrophilic blocks, poly(l-lysine) (PLL, Ky) and poly(ethylene glycol) (PEG, EG34), where x and y are the number of repeating units of each block, where PBG and PLL blocks have unique functions for nerve regeneration and cell adhesion. It shows that a sufficient length of the middle hydrophilic segment capped with hydrophobic end PBG blocks is required. They first self-assemble into flower-like micelles and sequentially form transparent hydrogels (as low as 2.3 wt %) with increased polymer concentration. The hydrogels contain a microscale porous structure, a desired property for tissue engineering to facilitate the access of nutrient flow for cell growth and drug delivery systems with high efficiency of drug storage. We hypothesize that the structure of Bx-Ky-EG34-Ky-Bx agglomerates is beyond micron size (transparent), while that of Ky-Bx-EG34-Bx-Ky is on the submicron scale (opaque). We establish a working strategy to synthesize a polypeptide-based block copolymer with a wide window of sol-gel transition. The study offers insight into rational polypeptide hydrogel design with specific morphology, exploring the novel materials as potential candidates for neural tissue engineering.

High-Performance Perovskite Solar Cells and Modules Fabricated by Slot-Die Coating with Nontoxic Solvents.

Energy shortage has become a global issue in the twenty-firt century, as energy consumption grows at an alarming rate as the fossil fuel supply exhausts. Perovskite solar cells (PSCs) are a promising photovoltaic technology that has grown quickly in recent years. Its power conversion efficiency (PCE) is comparable to that of traditional silicon-based solar cells, and scale-up costs can be substantially reduced due to its utilization of solution-processable fabrication. Nevertheless, most PSCs research uses hazardous solvents, such as dimethylformamide (DMF) and chlorobenzene (CB), which are not suitable for large-scale ambient operations and industrial production. In this study, we have successfully deposited all of the layers of PSCs, except the top metal electrode, under ambient conditions using a slot-die coating process and nontoxic solvents. The fully slot-die coated PSCs exhibited PCEs of 13.86% and 13.54% in a single device (0.09 cm2) and mini-module (0.75 cm2), respectively.

Injectable Hydrogel Guides Neurons Growth with Specific Directionality.

Visual disabilities affect more than 250 million people, with 43 million suffering from irreversible blindness. The eyes are an extension of the central nervous system which cannot regenerate. Neural tissue engineering is a potential method to cure the disease. Injectability is a desirable property for tissue engineering scaffolds which can eliminate some surgical procedures and reduce possible complications and health risks. We report the development of the anisotropic structured hydrogel scaffold created by a co-injection of cellulose nanofiber (CNF) solution and co-polypeptide solution. The positively charged poly (L-lysine)-r-poly(L-glutamic acid) with 20 mol% of glutamic acid (PLLGA) is crosslinked with negatively charged CNF while promoting cellular activity from the acid nerve stimulate. We found that CNF easily aligns under shear forces from injection and is able to form hydrogel with an ordered structure. Hydrogel is mechanically strong and able to support, guide, and stimulate neurite growth. The anisotropy of our hydrogel was quantitatively determined in situ by 2D optical microscopy and 3D X-ray tomography. The effects of PLLGA:CNF blend ratios on cell viability, neurite growth, and neuronal signaling are systematically investigated in this study. We determined the optimal blend composition for stimulating directional neurite growth yielded a 16% increase in length compared with control, reaching anisotropy of 30.30% at 10°/57.58% at 30°. Using measurements of calcium signaling in vitro, we found a 2.45-fold increase vs. control. Based on our results, we conclude this novel material and unique injection method has a high potential for application in neural tissue engineering.

Correction: Exploration of biomimetic poly(γ-benzyl-L-glutamate) fibrous scaffolds for corneal nerve regeneration.

Correction for 'Exploration of biomimetic poly(γ-benzyl-L-glutamate) fibrous scaffolds for corneal nerve regeneration' by Tien-Li Ma et al., J. Mater. Chem. B, 2022, 10, 6372-6379, https://doi.org/10.1039/D2TB01250B.

Dual-Function Fibrous Co-Polypeptide Scaffolds for Neural Tissue Engineering.

This paper reports dual-function (high cell attachment and cell viability) fibrous scaffolds featuring aligned fibers, displaying good biocompatibility and no cytotoxicity. These scaffolds are fabricated through the electrospinning of a co-polypeptide comprising molar equivalents of N6 -carbobenzyloxy-l-lysine and γ-benzyl-l-glutamate, with the lysine moieties enhancing cell adhesion and the neural-stimulating glutamate moieties improving cell viability. These new scaffolds allow neural cells to attach and grow effectively without any special surface treatment or coating. Pheochromocytoma (PC-12) cells grown on these scaffolds exhibit better neuronal activity and longer neurite length, relative to those grown on scaffolds prepared from their respective homo-polypeptides. When the scaffolds are partially hydrolyzed such that they present net positive charge and increased hydrophilicity, the cell viability and neurite growth both increase further. Accordingly, these novel co-polypeptide fibrous scaffolds have potential applications in neural tissue engineering.

Exploration of biomimetic poly(γ-benzyl-L-glutamate) fibrous scaffolds for corneal nerve regeneration.

Poly(γ-benzyl-L-glutamate) (PBG) made biomimetic scaffolds are explored as candidate materials for corneal nerve regeneration and neurotrophic keratopathy treatment. The PBG with built-in neurotransmitter glutamate was synthesized and fabricated into 3D fibrous scaffolds containing aligned fibers using electrospinning. In in vitro experiments, primary mouse trigeminal ganglia (TG) cells were used. Immunohistochemistry (IHC) analysis shows that TG cells cultured on PBG have no cytotoxic response for 21 days. Without any nerve growth factor, TG cells have the longest neurite length of 225.3 µm in the PBG group and 1.3 times the average length as compared with the polycaprolactone and no scaffold groups. Also, aligned fibers guide the neurite growth and extension unidirectionally. In vivo assays were carried out by intracorneal implantation of PBG on clinical New Zealand rabbits. The external eye photos and in vivo confocal microscopy (IVCM) show a low immune response. The corneal neural markers (ßIII tubulin and SMI312) in the IHC analysis are consistent with the position stained by glutamate of implanted scaffolds, indicating that PBG induces neurogenesis. PBG exhibits mechanical stiffness to resist material deformation possibly caused by surgical operations. The results of this study demonstrate that PBG is suitable for corneal nerve regeneration and the treatment of neurotrophic keratopathy.

Effect of cellulose compositions and fabrication methods on mechanical properties of polyurethane-cellulose composites.

A variety of cellulose-based polymer composite materials has been developed and show different impacts on the morphologies and properties of composites. Herein, we report the morphologies and properties of composites by blending polyurethane (PU) with either ethyl cellulose (EC) or cellulose nanofiber (CNF) through either drop-casting or electrospinning process. EC is homogenously mixed with PU without microphase separation and enhanced Young's modulus of composites from 0.04 to 6.94 MPa. The CNF is heterogeneously distributed in PU/CNF composites without interference on the PU microstructure and slightly increased modulus to 0.24 MPa. While the shearing force of the electrospinning process slightly affects the PU/EC composites, it drastically enhances PU crystallinity and Young's modulus to 54.95 MPa in PU/CNF composites. A model is established to summarize the effect of cellulose additives, compositions, and processes on PU/cellulose composites, providing a comprehensive understanding for designing future cellulose composites.

Work-Function-Tunable Electron Transport Layer of Molecule-Capped Metal Oxide for a High-Efficiency and Stable p-i-n Perovskite Solar Cell.

The composite electron transporting layer (ETL) of metal oxide with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) prevents perovskite from metal electrode erosion and increases p-i-n perovskite solar cell (PVSC) stability. Although the oxide exhibits protective function, an additional work function modifier is still needed for good device performance. Usually, complicated multistep synthesis is employed to have a highly crystalline film that increases manufacturing cost and inhibits scalability. We report a facile synthesis of a novel organic-molecule-capped metal oxide nanoparticle film for the composite ETL. The nanoparticle film not only has a dual function of electron transport and protection but also exhibits work function tunability. Solvothermal-prepared SnO2 nanoparticles are capped with tetrabutylammonium hydroxide (TBAOH) through ligand exchange. The resulting TBAOH-SnO2 nanoparticles disperse well in ethanol and form a uniform film on PCBM. The power conversion efficiency of the device dramatically increases from 14.91 to 18.77% using this layer because of reduced charge accumulation and aligned band structure. The PVSC thermal stability is significantly enhanced by adopting this layer, which prevents migration of I- and Ag. The ligand exchange method extends to other metal oxides, such as TiO2, ITO, and CeO2, demonstrating its broad applicability. These results provide a cornerstone for large-scale manufacture of high-performance and stable PVSCs.

Achieving High-Performance Perovskite Photovoltaic by Morphology Engineering of Low-Temperature Processed Zn-Doped TiO2 Electron Transport Layer.

Perovskite solar cells (PSCs) have become one of the most promising renewable energy converting devices. However, in order to reach a sufficiently high power conversion efficiency (PCE), the PSCs typically require a high-temperature sintering process to prepare mesostructured TiO2 as an efficient electron transport layer (ETL), which prohibits the PSCs from commercialization in the future. This work investigates a low-temperature synthesis of TiO2 nanocrystals and introduces a two-fluid spray coating process to produce a nanostructured ETL for the following deposition of perovskite layer. The temperature during the whole deposition process can be maintained under 150 °C. Compared to the typical planar TiO2 layer, the perovskite layer fabricated on a nanostructured TiO2 layer shows uniform compactness, preferred orientation, and high crystallinity, leading to reproducible and promising device performance. The detail mechanisms are revealed by the contact angle test, morphology characterization, grazing incident wide angle X-Ray scattering measurement, and space charge limited currents analysis. Finally, optimized device performance can be achieved through adequate Zn doping in the TiO2 layer, demonstrating an average PCE of 19.87% with champion PCE of 21.36%. The efficiency can maintain over 80% of its original value after 3000 h storage in ambient atmosphere. This study suggests a promising approach to offer high-efficiency PSCs using the low-temperature process.

Validated Analysis of Component Distribution Inside Perovskite Solar Cells and Its Utility in Unveiling Factors of Device Performance and Degradation.

Time-of-flight secondary-ion mass spectrometry (ToF-SIMS) has been used for gaining insights into perovskite solar cells (PSCs). However, the importance of selecting ion beam parameters to eliminate artifacts in the resulting depth profile is often overlooked. In this work, significant artifacts were identified with commonly applied sputter sources, i.e., an O2+ beam and an Ar-gas cluster ion beam (Ar-GCIB), which could lead to misinterpretation of the PSC structure. On the other hand, polyatomic C60+ and Ar+ ion beams were found to be able to produce depth profiles that properly reflect the distribution of the components. On the basis of this validated method, differences in component distribution, depending on the fabrication processes, were identified and discussed. The solvent-engineering process yielded a homogeneous film with higher device performance, but sequential deposition led to a perovskite layer sandwiched by methylammonium-deficient layers that impeded the performance. For device degradation, it was found that most components remained intact at their original position except for iodide. This result unambiguously indicated that iodide diffusion was one of the key factors governing the device lifetime. With the validated parameters provided, ToF-SIMS was demonstrated as a powerful tool to unveil the structure variation amid device performance and during degradation, which are crucial for the future development of PSCs.

Controlling the Morphology and Interface of the Perovskite Layer for Scalable High-Efficiency Solar Cells Fabricated Using Green Solvents and Blade Coating in an Ambient Environment.

Low-cost and solution-processed perovskite solar cells have shown great potential for scaling-up mass production. In comparison with the spin coating process for fabricating devices with small areas, the blade coating process is a facile technique for preparing uniform films with large areas. High-efficiency perovskite solar cells have been reported using blade coating, but they were fabricated using the toxic solvent N,N-dimethylformide (DMF) in nitrogen. In this work, we present highly efficient blade-coated perovskite solar cells prepared using a green solvent mixture of γ-butyrolactone (GBL) and dimethyl sulfoxide (DMSO) in an ambient environment. By carefully controlling the interface, morphology, and crystallinity of perovskite films through composition variations and additives, a high power conversion efficiency of 17.02% is achieved in air with 42.4% reduction of standard deviation in performance. The findings in this work resolve the issues of scalability and solvent toxicity; thus, the mass production of perovskite solar cells becomes feasible.

Oligo(ethylene glycol) side chain effect on the physical properties and molecular arrangement of oligothiophene-isoindigo based conjugated polymers.

Oligo(ethylene glycol) (OEG) side chains are widely used in donor-acceptor conjugated polymers (D-A CPs) and enable the polymers to dissolve and be processed in environmentally friendly and cost-effective nonchlorinated solvents, such as water. However, the OEG effect on the physical properties of D-A CPs has not been thoroughly studied and sometimes the results are controversial. In this study, two oligothiophene-isoindigo based conjugated polymers, P3TI and P4TI, are selected as model polymers to investigate the OEG effect. PnTI has octyl side chains on the oligothiophene unit and 2-hexyldecyl side chains on the isoindigo unit. The replacement of an alkyl side chain with OEG not only changes the optical and thermal properties but also the molecular arrangements of the polymers such as π-π d-spacing, crystallinity, and packing orientation. The domination of the crystallization behavior changes from the oligothiophene unit to the isoindigo unit when the bulky alkyl group is replaced by the flexible and linear OEG. The packing changes from edge-on to face-on orientation. The results are intriguing and provide new insights into this class of polymers.

Rapid template-free synthesis of nanostructured conducting polymer films by tuning their morphology using hyperbranched polymer additives.

Nanostructures in conducting polymer films can enhance charge carrier and ion transfer, provide porosity with high specific area and confer unique optoelectronic properties for potential applications. A general and facile synthesis has been developed to prepare nanostructured conducting polymer films without the need for using templates. This simple approach employs hyperbranched polymers as additives to tune the morphology of conducting polymer films into a continuous nanofibril network. Nanostructured conducting polymer films with improved crystallinity exhibit good charge carrier transport and stable nanofibril network, without sacrificing either property upon removing residual additives. Polymer field-effect transistor sensors have been used to demonstrate the benefits of the large surface area provided by the nanofibril network. The sensors with porous nanostructures exhibit lower detection limits (two times lower) and faster response times (33% faster) compared to the sensors without nanostructures. This general approach can advance the knowledge and development of nanostructured conducting polymer films for energy harvesting and storage, electronics, catalysts, sensors and biomedical applications.

Polybenzyl Glutamate Biocompatible Scaffold Promotes the Efficiency of Retinal Differentiation toward Retinal Ganglion Cell Lineage from Human-Induced Pluripotent Stem Cells.

Optic neuropathy is one of the leading causes of irreversible blindness caused by retinal ganglion cell (RGC) degeneration. The development of induced pluripotent stem cell (iPSC)-based therapy opens a therapeutic window for RGC degeneration, and tissue engineering may further promote the efficiency of differentiation process of iPSCs. The present study was designed to evaluate the effects of a novel biomimetic polybenzyl glutamate (PBG) scaffold on culturing iPSC-derived RGC progenitors. The iPSC-derived neural spheres cultured on PBG scaffold increased the differentiated retinal neurons and promoted the neurite outgrowth in the RGC progenitor layer. Additionally, iPSCs cultured on PBG scaffold formed the organoid-like structures compared to that of iPSCs cultured on cover glass within the same culture period. With RNA-seq, we found that cells of the PBG group were differentiated toward retinal lineage and may be related to the glutamate signaling pathway. Further ontological analysis and the gene network analysis showed that the differentially expressed genes between cells of the PBG group and the control group were mainly associated with neuronal differentiation, neuronal maturation, and more specifically, retinal differentiation and maturation. The novel electrospinning PBG scaffold is beneficial for culturing iPSC-derived RGC progenitors as well as retinal organoids. Cells cultured on PBG scaffold differentiate effectively and shorten the process of RGC differentiation compared to that of cells cultured on coverslip. The new culture system may be helpful in future disease modeling, pharmacological screening, autologous transplantation, as well as narrowing the gap to clinical application.

Peptide-Based Polyelectrolyte Promotes Directional and Long Neurite Outgrowth.

Neural tissue engineering has emerged as a promising technology to cure neural damages. Although various synthetic polymers with good biocompatibility and biodegradability have been adopted as candidate materials for scaffolds, most of them require the incorporation of biomolecules or conductive materials to promote the growth of long axons. Herein we demonstrate for the first time a unique peptide-based polyelectrolyte that is ionically conductive and contains a neurotransmitter, glutamic acid. The designed polymer, sodium salt of poly(γ-benzyl-l-glutamate)-r-poly(l-glutamic acid) (PBGA20-Na), was synthesized and fabricated into a 3D fibrous scaffold with aligned fibers. Neuron-like rat pheochromocytoma (PC12) cells were cultured on the scaffolds to evaluate cell proliferation and differentiation with or without electrical stimulation. The results show that with both electrical and biochemical cues presented in the polyelectrolyte, PBGA20-Na promotes longer neurite outgrowth compared with the neutral poly(γ-benzyl-l-glutamate) (PBG) and the poly(γ-benzyl-l-glutamate)-r-poly(l-glutamic acid) (PBGA20). Furthermore, the neurite length of the cells cultured on PBGA20-Na is more than twice as long compared with the conventional biopolymer, polycaprolactone. In conclusion, PBGA20-Na is a promising biomaterial for neural tissue engineering and drug-screening platforms.

Highly Conductive 2D Metal-Organic Framework Thin Film Fabricated by Liquid-Liquid Interfacial Reaction Using One-Pot-Synthesized Benzenehexathiol.

Metal-organic frameworks (MOF) are studied extensively in applications like catalysts, gas storage, and sensors due to their various functional groups and structures. Two-dimensional (2D) MOFs such as triphenylene-based materials show excellent charge transport properties, but thin-film fabrication and organic ligand synthesis are difficult. In this work, we synthesize thiol-based organic ligand, benzenehexathiol (BHT), by a simple one-pot reaction. This facile method is safer and faster than conventional synthesis procedure that requires using liquid ammonia as solvent. Two novel 2D MOF materials, Ag3BHT2 and Au3BHT2, are fabricated by coordinating BHT with either silver (Ag) or gold (Au) ions through liquid-liquid interfacial reaction. The Ag3BHT2 thin film reaches a high electrical conductivity of 363 S cm-1, which has potential applications in electronic devices and sensors.

The feedback loop between miR-21, PDCD4 and AP-1 functions as a driving force for renal fibrogenesis.

Renal fibrosis is a final common pathway of chronic kidney disease. Sustained activation of fibroblasts is considered to play a key role in perpetuating renal fibrosis but the driving force in the perpetuation stage is only partially understood. To date, some investigations have specifically identified overexpression of microRNA 21 (miR-21) in the progression of kidney fibrosis. Nevertheless, the precise role of miR-21 in fibroblast activation remains largely unknown. In this study, we found that miR-21 was significantly upregulated in activated fibroblasts and that it maintained itself at constant high levels by employing an auto-regulatory loop between miR-21, PDCD4 and AP-1. Persistently upregulated miR-21 suppressed protein expression of Smad7 and, eventually, enhanced the TGF-ß1/Smad pathway to promote fibroblast activation. More importantly, we found miR-21 sequestration with miR-21 antagomir or AP-1 inhibitors attenuated unilateral ureteral obstruction (UUO)-induced renal fibrosis. miR-21-knockout mice also suffered far less interstitial fibrosis in response to kidney injury. Altogether, these data suggest that miR-21 is a main driving force of fibroblast activation and keeps its high expression level by employing a double negative autoregulatory loop. Targeting this aberrantly activated feedback loop may provide new therapeutic strategy in treating fibrotic kidneys.

Novel 3D Neuron Regeneration Scaffolds Based on Synthetic Polypeptide Containing Neuron Cue.

Neural tissue engineering has become a potential technology to restore the functionality of damaged neural tissue with the hope to cure the patients with neural disorder and to improve their quality of life. This paper reports the design and synthesis of polypeptides containing neuron stimulate, glutamic acid, for the fabrication of biomimetic 3D scaffold in neural tissue engineering application. The polypeptides are synthesized by efficient chemical reactions. Monomer γ-benzyl glutamate-N-carboxyanhydride undergoes ring-opening polymerization to form poly(γ-benzyl-l-glutamate), then hydrolyzes into poly(γ-benzyl-l-glutamate)-r-poly(glutamic acid) random copolymer. The glutamic acid amount is controlled by hydrolysis time. The obtained polymer molecular weight is in the range of 200 kDa for good quality of fibers. The fibrous 3D scaffolds of polypeptides are fabricated using electrospinning techniques. The scaffolds are biodegradable and biocompatible. The biocompatibility and length of neurite growth are improved with increasing amount of glutamic acid in scaffold. The 3D scaffold fabricated from aligned fibers can guide anisotropic growth of neurite along the fiber and into 3D domain. Furthermore, the length of neurite outgrowth is longer for scaffold made from aligned fibers as compared with that of isotropic fibers. This new polypeptide has potential for the application in the tissue engineering for neural regeneration.

Quantitative correlation of the effects of crystallinity and additives on nanomorphology and solar cell performance of isoindigo-based copolymers.

The high power conversion efficiency of bulk heterojunction (BHJ) polymer solar cells can be achieved from either low crystallinity (P3TI) or high crystallinity (P6TI) of isoindigo-based donor-acceptor alternating copolymers blended with PC71BM by controlling nanophase separation using additives. P3TI shows similar device performance regardless of the type of additives, while P6TI is significantly affected by whether the additive is aliphatic or aromatic. To understand the interplays of crystallinity of polymers and the type of additive on the formation of nanomorphology of BHJ, we employed the simultaneous grazing-incidence small- and wide-angle X-ray scattering (GISAXS and GIWAXS) technique to perform the quantitative investigation. By incorporating additives, the PC71BM molecules can be easily intercalated into the P3TI polymer-rich domain and the size of the PC71BM clusters is reduced from about 24 nm to about 5 nm by either aliphatic 1,8-diiodooctane (DIO) or aromatic 1-chloronaphthalene (CN). On comparison, it is found to be more difficult for PC71BM molecules to be intercalated into the highly crystalline P6TI dense domain, and the PC71BM molecules have a higher tendency to be self-aggregated, which results in a larger size of PC71BM clusters of about 58 nm. The clusters can be reduced to about 7 nm by DIO and 13 nm by CN. The presence of crystallites in the P6TI domain can interact with the additive to tailor the crystallization of PC71BM clusters to a size similar to that of P6TI crystallites (∼12 nm) and form a connected network for efficient charge transportation. Thus, the power conversion efficiency of P6TI:PC71BM reaches its maximum of 7.04% using aromatic CN additives. This is a new finding of the effect of crystallinity, which is not observed in the common low crystalline donor-acceptor alternating copolymers such as PTB7. Our results provide a useful guideline to manipulate the desired morphology of BHJ films constructed from alternating copolymer with different crystallinity, which is critical for achieving high power conversion efficiency of solar cells.

Improved Solar-Driven Photocatalytic Performance of Highly Crystalline Hydrogenated TiO2 Nanofibers with Core-Shell Structure.

Hydrogenated titanium dioxide has attracted intensive research interests in pollutant removal applications due to its high photocatalytic activity. Herein, we demonstrate hydrogenated TiO2 nanofibers (H:TiO2 NFs) with a core-shell structure prepared by the hydrothermal synthesis and subsequent heat treatment in hydrogen flow. H:TiO2 NFs has excellent solar light absorption and photogenerated charge formation behavior as confirmed by optical absorbance, photo-Kelvin force probe microscopy and photoinduced charge carrier dynamics analyses. Photodegradation of various organic dyes such as methyl orange, rhodamine 6G and brilliant green is shown to take place with significantly higher rates on our novel catalyst than on pristine TiO2 nanofibers and commercial nanoparticle based photocatalytic materials, which is attributed to surface defects (oxygen vacancy and Ti3+ interstitial defect) on the hydrogen treated surface. We propose three properties/mechanisms responsible for the enhanced photocatalytic activity, which are: (1) improved absorbance allowing for increased exciton generation, (2) highly crystalline anatase TiO2 that promotes fast charge transport rate, and (3) decreased charge recombination caused by the nanoscopic Schottky junctions at the interface of pristine core and hydrogenated shell thus promoting long-life surface charges. The developed H:TiO2 NFs can be helpful for future high performance photocatalysts in environmental applications.