RESUMO
Energy is a crucial entity for the development and it has various alternative forms of energy sources. Recently, the synthesis of nanoparticles using benign biocatalyst has attracted increased attention. In this study, silver nanoparticles were synthesized and characterized using Azadirachta indica plant-derived phytochemical as the reducing agent. Biomass of the microalga Chlorella sp. cultivated in BG11 medium increased after exposure to low concentrations of up to 0.48 mg L-1 AgNPs. In addition, algal cells treated with 0.24 mg L-1 AgNPs and cultivated in BG110 medium which contained no nitrogen source showed the highest hydrogen yield of 10.8 mmol L-1, whereas the untreated cells under the same conditions showed very low hydrogen yield of 0.003 mmol L-1. The enhanced hydrogen production observed in the treated cells was consistent with an increase in hydrogenase activity. Treatment of BG110 grown cells with low concentration of green synthesized AgNPs at 0.24 mg L-1 enhanced hydrogenase activity with a 5-fold increase of enzyme activity compared to untreated BG110 grown cells. In addition, to improve photolytic water splitting efficiency for hydrogen production, cells treated with AgNPs at 0.24 mg L-1 showed highest oxygen evolution signifying improvement in photosynthesis. The silver nanoparticles synthesized using phytochemicals derived from plant enhanced both microalgal biomass and hydrogen production with an added advantage of CO2 reduction which could be achieved due to an increase in biomass. Hence, treating microalgae with nanoparticles provided a promising strategy to reduce the atmospheric carbon dioxide as well as increasing production of hydrogen as clean energy.
Assuntos
Biomassa , Chlorella , Hidrogênio , Nanopartículas Metálicas , Nitrogênio , Prata , Nanopartículas Metálicas/química , Chlorella/metabolismo , Chlorella/efeitos dos fármacos , Prata/química , Hidrogênio/metabolismo , Nitrogênio/metabolismo , Fotossíntese/efeitos dos fármacos , Hidrogenase/metabolismo , Microalgas/metabolismoRESUMO
Effective drug delivery for is the foremost requirement for the complete recovery of the disease. Nanomedicine and nanoengineering has provided so many spaces and ideas for the drug delivery design, whether controlled, targeted, or sustained. Different types of nanocarriers or nanoparticles are aggressively designed for the drug delivery applications. Clay minerals are identified as a one of the potential nanocarrier for the drug delivery. Owing to their biocompatibility and very low cytotoxicity, clay minerals showing effective therapeutic applications. In the present investigation, clay mineral, i.e., Halloysite nano tubes are utilized as a nanocarrier for the delivery of antibiotic cefixime (CFX), a third-generation cephalosporin. The HNT was first functionalized with the sulfuric acid and then further treated with the 3-(aminopropyl)triethoxysilane (APTES). The drug is loaded on three different classifications of HNTs, i.e., Bare-CFX-HNT, Acid-CFX-HNT, and APTES-CFX-HNT and their comparative analysis is established. Different characterization techniques such as X-ray diffractometry (XRD), Fourier transform infra-red (FT-IR), Transmission electron microscopy TEM), Brunauer-Emmett-Teller (BET), adsorption studies, and Thermogravimetric analysis (TGA) were performed to evaluate their chemical, structural, morphological, and thermal properties. TGA confirmed the encapsulation efficiency of Bare-CFX-HNT, Acid-CFX-HNT, and APTES-CFX-HNT as 42.65, 52.19, and 53.43%, respectively. Disk diffusion and MTT assay confirmed that the drug loaded HNTs have potential antibacterial activities and less cytotoxicity. The adsorption capacity of CFX with different HNTs are evaluated and Different adsorption and kinetic models have been discussed. Drug release studies shows that APTES-CFX-HNT showing sustained release of cefixime as compared to Bare-CFX-HNT and Acid-CFX-HNT.
Assuntos
Antibacterianos , Cefixima , Argila , Cefixima/química , Antibacterianos/química , Argila/química , Portadores de Fármacos/química , Silicatos de Alumínio/química , Nanopartículas/química , Silanos/química , Espectroscopia de Infravermelho com Transformada de Fourier , PropilaminasRESUMO
The textiles for medical use and the purification of textile factory effluents have become the most crucial part of the human healthcare sector. In this study bioactive compounds produced by four distinct plant extracts were used for the synthesis of zinc oxide nanoparticles. The four different ZnO nanoparticles were comprehensively characterized by different analytical techniques. XRD analysis revealed the crystalline nature and phase purity of the ZnO nanoparticles. FTIR spectra provided information on the function of plant extracts in the stabilization or capping process. The size distribution and morphological diversity of the nanoparticles were further clarified by SEM and TEM images. The photocatalytic degradation activity of the four ZnO nanoparticles on two different dyes showed that ZnO nanoparticles prepared from A. indica were most effective for the degradation of 98 % and 91 % of Rhodamine B and Alizarin red dye respectively. The selected ZnO nanoparticles from A. indica were used to prepare ZnO-chitosan nanocomposites before coating on cotton fabrics. The hydrophobicity, UV protection factor, and antibacterial activity of ZnO-chitosan nanocomposites, when coated on cotton fabrics, were also examined. The overall results demonstrated the ZnO and ZnO-chitosan nanocomposite prepared in the present study as a promising material for environmental remediation application.
Assuntos
Quitosana , Nanocompostos , Óxido de Zinco , Humanos , Óxido de Zinco/química , Quitosana/química , Antibacterianos/farmacologia , Antibacterianos/química , Têxteis , Corantes , Nanocompostos/química , Extratos Vegetais/químicaRESUMO
Clay minerals such as Halloysite nanotubes (HNTs), abundantly available green nanomaterial, exhibit a significant advantage in biomedical applications such as drug delivery, antibacterial and antimicrobials, tissue engineering or regeneration, etc. Because of the mesoporous structure and high absorbability, HNTs exhibit great potential as a nanocarrier in drug delivery applications. The sulfuric acid treatment enhances the surface area of the HNTs and thereby improves their drug-loading capacity by enlarging their lumen space/inner diameter. In the present investigation, based on the literature that supports the efficacy of drug loading after acid treatment, a dual treatment was performed to functionalize the HNTs surface. First, the HNTs were etched and functionalized using sulfuric acid. The acid-functionalized HNTs underwent another treatment using (3-aminopropyl) triethoxysilane (APTES) to better interact the drug molecules with the HNTs surfaces for efficient drug loading. Augmentin, a potential drug molecule of the penicillin group, was used for HNTs loading, and their antibacterial properties, cytotoxicity, and cumulative drug release (%) were evaluated. Different characterization techniques, such as X-ray diffractometer (XRD) and Fourier Transform Infra-Red (FT-IR), confirm the loading of Augmentin to the APTES@Acid HNTs. TEM images confirm the effective loading of the drug molecule with the HNTs. The drug encapsulation efficiency shows 40.89%, as confirmed by the Thermogravimetric Analysis (TGA). Also, the Augmentin-loaded APTES@Acid HNTs exhibited good antibacterial properties against E. coli and S. aureus and low cytotoxicity, as confirmed by the MTT assay. The drug release studies confirmed the sustainable release of Augmentin from the APTES@Acid HNTs. Hence, the treated HNTs can be considered as a potential nanocarrier for effectively delivering Augmentin and promoting enhanced therapeutic benefits.
Assuntos
Combinação Amoxicilina e Clavulanato de Potássio , Nanotubos , Ácidos Sulfúricos , Argila/química , Espectroscopia de Infravermelho com Transformada de Fourier , Staphylococcus aureus , Escherichia coli , Antibacterianos/farmacologia , Nanotubos/químicaRESUMO
Wastewater treatment remains the most significant delinquent issue world-wide. Generally, wastewater treatment involves filtration followed by acidified de-emulsification through photocatalytic reduction. The aim of the present study is to reduce the use of nanoparticles in wastewater treatment and also to find an appropriate alternative to replace cotton fiber filters used in water treatment plant. The cotton fiber filters are highly prone to bacterial film development leading to bactericidal degradation of the fibers. We developed a ZnO-chitosan nanocomposite coated fiber for wastewater treatment to enhance its photocatalytic activity under acidic condition. The fiber showed high degree of photocatalytic degradation activity, reducing rhodamine B dye, chemical oxygen demand and chromium levels in the synthetic wastewater to 37, 79 and 51% respectively under highly acidic condition. Additionally, ZnO-chitosan nanocomposite did not cause mortality on Danio rerio embryo after 72 h incubation. The ZnO-chitosan nanocomposite coated fiber showed strong antibacterial activity against Escherichia coli and Staphylococcus aureus with a reduction of 96% and 99% respectively. This study demonstrated the potential of a novel smart fiber in wastewater treatment and biomedical applications.
Assuntos
Quitosana , Nanocompostos , Nanopartículas , Óxido de Zinco , Quitosana/química , Águas Residuárias , Óxido de Zinco/química , Antibacterianos/farmacologia , Antibacterianos/química , Metais , Nanocompostos/química , CatáliseRESUMO
A solvent casting technique was used for the preparation of biomimetic nanocomposites scaffolds at three various concentrations of Curcumin loaded gold nanoparticles (Cur-AuNPs-1, 1.5, and 2 ml) as filler materials with chitosan-sodium alginate composite. The physico-chemical properties of prepared Cu-Au NPs and biomimetic nanocomposites were analyzed using various characterization techniques. In vitro biocompatibility of biomimetic nanocomposites are determined using simulated body fluid for biomineralization property, HAp formation and phosphate buffer saline (PBS) for swelling property, protein adsorption. Antibacterial activity of Cur-Au NPs and their nanocomposites carried out against Escherichia coli (E. coli) and Staphylococcus aureus. In vitro cytotoxicity of Cur-AuNPs is identified against UC-6 and MDA-MB 231 cell lines. The use of above studies and activity of Cur-AuNPs with contain biomimetic nanocomposites can adoptable for nanotheranostics.
Assuntos
Quitosana , Curcumina , Nanopartículas Metálicas , Nanocompostos , Nanopartículas , Quitosana/química , Ouro/química , Curcumina/farmacologia , Curcumina/química , Nanopartículas Metálicas/química , Alginatos/química , Escherichia coli , Nanomedicina Teranóstica , Nanopartículas/química , Nanocompostos/química , Antibacterianos/farmacologia , Antibacterianos/químicaRESUMO
Nanostructured materials possess unique structural and functional properties that play a crucial position in tissue engineering applications. Present investigation is aimed to synthesize chitosan-sodium alginate (CS) nanocomposite using hydrothermally prepared zirconia nanoparticles. In this, three different weight percentages of (0.5, 1, and 1.5) zirconia nanoparticles are utilized for the preparation of biomimetic nanocomposite scaffolds (CSZ) employing 4 wt% of CS by a solvent casting technique. Physico-chemical and thermal behavior of the prepared nanoparticles and their CSZ scaffolds are comprehensively characterized. Bioactivity of the prepared zirconia nanoparticles and CSZ scaffolds are explored in terms of in vitro biocompatibility, protein absorption in simulated body fluid (SBF), and phosphate buffered saline (PBS). Agar disc diffusion method is employed to identify the antibacterial property against Staphylococcus aureus and Escherichia coli. In vitro cytotoxicity of zirconia nanoparticles and CSZ scaffolds is identified against human urothelial carcinoma (UC6) and osteosarcoma (MG-63) cells. These studies explore that zirconia nanoparticles are suitable for biomedical applications while it is interacted with chitosan and sodium alginate (CS) due to their promising biocompatibility. Biomimetically obtained chitosan/sodium alginate scaffold contain 1 wt% zirconia nanoparticles show higher biocompatibility amenable for tissue engineering applications.
Assuntos
Carcinoma de Células de Transição , Quitosana , Nanocompostos , Neoplasias da Bexiga Urinária , Alginatos/química , Alginatos/farmacologia , Biomimética , Quitosana/química , Quitosana/farmacologia , Escherichia coli , Humanos , Nanocompostos/química , Engenharia Tecidual/métodos , Alicerces Teciduais/química , ZircônioRESUMO
The present experimental work is carried out to analyse the performance, combustion, and exhaust emission characteristics of variable compression ratio (VCR) diesel engine using blended biofuel (B20) with nanoadditives. Transesterified biodiesel was prepared from waste cooking oil (WCO). The cerium oxide nanoparticles (CERIA) were produced and categorized by precipitation technique, SEM and XRD analysis. These nanoadditives mixed with biofuel blend by magnetic stirrer and then by ultrasonication. The test procedure was carried out under the following fuel blends: 20% of biodiesel added to 80% diesel (B20), 15ppm, 30ppm, 45ppm, 60ppm and 75ppm cerium oxide nanoparticles added with B20 blend (diesel, B20, B20+CERIA15, B20+CERIA30, B20+CERIA45, B20+CERIA60, B20+CERIA75). The engine was operated at fixed compression ratio 20:1 and constant speed at various load conditions 0%, 25%, 50%, 75% and 100%, and results were compared to diesel at 100% load. The improvement in B20 fuel characteristics was observed by adding cerium oxide nanoparticles. The outcomes indicate better improvement in the blended sample of B20+CERIA45 ppm with brake thermal efficiency increased by 3.62% and specific fuel consumption decreased by 3.3% than the neat diesel. Presence of added particles gives better atomization which prompts total burning in the combustion chamber and builds up the amplified pressure data. The emission of CO and HC outflow dimnishes by the addition of CERIA nanoparticles in blended biofuel. Additionally, there is a reduction in NOx by expanding the CERIA dosage in the fuel mixer. This occurs due to CERIA particles presented in a fuel blend behaving as an oxygen buffer and engaging the O2 for decreasing the NOx formation.
Assuntos
Biocombustíveis , Nanopartículas , Biocombustíveis/análise , Monóxido de Carbono/análise , Culinária , Gasolina/análise , Emissões de VeículosRESUMO
The study is aimed to synthesize potent metal oxide based biomimetic nanocomposites to overcome the risk associated with artificial bone tissue engineering. High purity TiO2 nanoparticles are synthesized via hydrothermal route. A biomimetic nanocomposite scaffolds containing chitosan-sodium alginate (4: 4) blended with three different (0.5, 1, and 1.5 wt%) concentrations of hydrothermally synthesized TiO2 nanoparticles are obtained by solvent casting technique. The physico-chemical and thermal degradation properties of as-synthesized TiO2 nanoparticles and their nanocomposite scaffolds are analyzed. In-vitro cytotoxicity and biocompatibility of the prepared TiO2 nanoparticles and nanocomposites are tested against human bladder tumor (UC6) and osteosarcoma (MG-63) cell lines. Antibacterial property is tested against Escherichia coli and Staphylococcus aureus. These studies reveal that TiO2 nanoparticles and polymeric nanocomposites contain good physico-chemical and mechanical properties for enhanced in-vitro biocompatibility suitable for biomedical applications. Biomimetically prepared chitosan-sodium alginate scaffold containing TiO2 nanoparticles (1 wt%) is found to exhibit superior biocompatibility for bone tissue engineering applications.
Assuntos
Antibacterianos , Materiais Biomiméticos , Escherichia coli/crescimento & desenvolvimento , Teste de Materiais , Nanocompostos/análise , Staphylococcus aureus/genética , Engenharia Tecidual , Alicerces Teciduais/química , Alginatos/química , Antibacterianos/química , Antibacterianos/farmacologia , Materiais Biomiméticos/química , Materiais Biomiméticos/farmacologia , Linhagem Celular Tumoral , Humanos , Titânio/químicaRESUMO
Nanomaterials play a vital role in textile industries due to their unique properties and applications. There is an increase in the use of nanoscale phyto products in textiles to control the bacterial infection in fabrics. Here, natural herbal nanoparticles of different sizes were prepared from shade-dried Aloe vera plant leaves using ball milling technique without any additives. The amorphous herbal A. vera nanoparticles possess an average particle size of 40 ± 2â nm and UV-absorption maximum at 269â nm. A. vera nanopowders-chitosan nanocomposites were prepared and coated on cotton fabrics using pad-dry cure method. The evaluation of antibacterial activity against Escherichia coli (22.05 ± 0.06â mm) and Staphylococcus aureus (27.17 ± 0.02â mm), UV-protection properties (UV-protection factor = 57.2 ± 0.1), and superhydrophobic nature (155 ± 3°) of the prepared herbal nanoparticles and their composites were analysed by disc diffusion, UV-visible spectral analysis, and contact angle analysis. Understanding the functional properties of herbal nanoparticles, coated particles on fabrics highlights their potential applications in protective clothing with better antimicrobial properties, hydrophobicity, and UV-protection properties. This study of using A. vera herbal nanoparticles in textiles significantly enhances the fabric performance to develop protective textile fabrics in defence and biomedical fields.