Pharmaceutical applications of therapeutic deep eutectic systems (THEDES) in maximising drug delivery.

The issue of poor solubility of active pharmaceutical ingredients (APIs) has been a salient area of investigation and novel drug delivery systems are being developed to improve the solubility of drugs, enhance their permeability and thereby their efficacy. Several techniques for solubilization enhancement of poorly soluble drugs are often employed at various stages of pharmaceutical drug product development. One such delivery system is the therapeutic deep eutectic system (THEDES), which showed great potential in the enhancement of solubility and permeability of drugs and ultimately augmenting their bioavailability. THEDES are made by mixing drugs with deep eutectic solvents (DESs) in a definite molar ratio by the hit and trial method. The DESs are a new class of green solvents which are non-toxic, cheap, easy to prepare, biodegradable and have multiple applications in the pharmaceutical industry. The terminologies such as ionic liquids (ILs), DES, THEDES, and therapeutic liquid eutectic systems (THELES) have been very much in use recently, and it is important to highlight the pharmaceutical applications of these unexplored reservoirs in drug solubilization enhancement, drug delivery routes, and in the management of various diseases. This review is aimed at discussing the components, formulation strategies, and routes of administration of THEDES that are used in developing the formulation. Also, the major pharmaceutical applications of THEDES in the treatment of various metabolic and non-metabolic diseases are reviewed.

RETRACTED: Alhakamy et al. Optimized Ellagic Acid-Ca Pectinate Floating Beads for Gastroprotection against Indomethacin-Induced Gastric Injury in Rats. Biomolecules 2020, 10, 1006.

The journal retracts the article, "Optimized Ellagic Acid-Ca Pectinate Floating Beads for Gastroprotection against Indomethacin-Induced Gastric Injury in Rats" [...].

RETRACTED: Fahmy et al. Intranasal Niosomal In Situ Gel as a Promising Approach for Enhancing Flibanserin Bioavailability and Brain Delivery: In Vitro Optimization and Ex Vivo/In Vivo Evaluation. Pharmaceutics 2020, 12, 485.

This journal retracts the article "Intranasal Niosomal In Situ Gel as a Promising Approach for Enhancing Flibanserin Bioavailability and Brain Delivery: In Vitro Optimization and Ex Vivo/In Vivo Evaluation" [...].

Design and characterization of Lactotransferrin peptide-loaded dextran-docosahexaenoic acid nanoparticles: an immune modulator for hepatic damage.

The primary objective of this research was to create injectable delivery formulations using Lactotransferrin (LTF) peptide-loaded dextran nanoparticles coated with docosahexaenoic acid. These nanoparticles, designated as LLDDNP, underwent a lyophilization process. The study encompassed a comprehensive investigation, including physicochemical characterization, in vivo assessment of biomarkers, and an examination of immune response through cytokine modulation. The zeta potential of LLDDNP was - 24.5 ± 12 mV, while their average particle size was 334.9 z.d.nm. The particles exhibited a conductivity of 2.10 mS/cm, while their mobility in the injectable dosage form was measured at - 3.65 µm cm/Vs. The scanning electron microscopy investigation, the lyophilization processes resulted in discrete particles forming particle aggregations. However, transmission electron microscopy analysis revealed that LLDDNP is spherical and smooth. The thermogram showed that about 95% of LLDDNP's weight was lost at 270 °C, indicating that the particles are extremely thermal stable. The XRD analysis of LLDDNP exhibited clear and distinctive peaks at 2θ angles, specifically at 9.6°, 20.3°, 21.1°, 22°, 24.6°, 25.2°, 36°, and 44.08°, providing compelling evidence of the crystalline nature of the particles. According to proton NMR studies, the proton dimension fingerprint region of LLDDNP ranges from 1.00 to 1.03 ppm. The in vitro release of LTF from LLDDNP was found to follow zero-order kinetics, with a commendable R2 value of 0.942, indicating a consistent and predictable release pattern over time. The in vivo investigation revealed a significant impact of hepatotoxicity on the elevation of various cytokines, including IL-1ß, IL-6, IL-8R, TNF-α, IL-2, IL-4, IL-10, and IFN-γ. Additionally, the presence of hepatotoxicity led to an increase in apoptosis markers, namely caspase 3 and caspase 9, as well as elevated levels of liver biomarkers such as CRP, ALP, ALT, and AST. In contrast, the treatment with LLDDNP modulated the levels of all biomarkers, including cytokines level in the treatment group extremely high significant at p < 0.001.

Cellular, Molecular, Pharmacological, and Nano-Formulation Aspects of Thymoquinone-A Potent Natural Antiviral Agent.

The goal of an antiviral agent research is to find an antiviral drug that reduces viral growth without harming healthy cells. Transformations of the virus, new viral strain developments, the resistance of viral pathogens, and side effects are the current challenges in terms of discovering antiviral drugs. The time has come and it is now essential to discover a natural antiviral agent that has the potential to destroy viruses without causing resistance or other unintended side effects. The pharmacological potency of thymoquinone (TQ) against different communicable and non-communicable diseases has been proven by various studies, and TQ is considered to be a safe antiviral substitute. Adjunctive immunomodulatory effects in addition to the antiviral potency of TQ makes it a major compound against viral infection through modulating the production of nitric oxide and reactive oxygen species, decreasing the cytokine storm, and inhibiting endothelial dysfunction. Nevertheless, TQ's low oral bioavailability, short half-life, poor water solubility, and conventional formulation are barriers to achieving its optimal pharmacologic benefits. Nano-formulation proposes numerous ways to overcome these obstacles through a small particle size, a big surface area, and a variety of surface modifications. Nano-based pharmaceutical innovations to combat viral infections using TQ are a promising approach to treating surmounting viral infections.

Application of Box-Behnken Design in the Optimization and Preparation of Salicylic Acid Nanopowder using Solvent-Free Green Mechanochemical Approach.

Background: One of the imperative progressions within the pharmaceutical industry, especially drugs, is the expanded utilization of materials in order to enhance its dissolution, solubility and bioavailability. Planetary ball monomill approach can be the latest entrant to Green nanotechnology - being solvent-free, eco-friendly, cost-effective, and sustainable particle size reduction approach. Objectives: Salicylic acid nanopowder (SA-NP) was aimed to be prepared using planetary ball monomill by dry milling technique to enhance its solubility and bioavailability. Methods: Various milling parameters such as milling speed, milling time and number of balls was varied and their effect on dependent responses including size (nm) and polydispersity indices (PDI) were evaluated using a 3-Factorial-3-Level Box-Behnken statistical design. Particle size and PDI analysis was performed using light scattering technique. Results: The particle size of salicylic acid obtained by optimizing the dry milling parameters was Z-Average (d.nm): 776.3 nm and PDI: 0.600 up to Z-Average (d. nm): 205.0 nm and PDI: 0.383. Conclusions: Dry milling can be used for the preparation of nanopowders of drug candidates with poor water-solubility issues. Present day medications have nano-scaled active ingredients which are rapidly absorbed by the human body as compared to the conventional ones. Enlarged surface area increases the solubility of the drug, thereby improves its bioavailability.

Cubosomes in Drug Delivery-A Comprehensive Review on Its Structural Components, Preparation Techniques and Therapeutic Applications.

Cubosomes are lipid vesicles that are comparable to vesicular systems like liposomes. Cubosomes are created with certain amphiphilic lipids in the presence of a suitable stabiliser. Since its discovery and designation, self-assembled cubosomes as active drug delivery vehicles have drawn much attention and interest. Oral, ocular, transdermal, and chemotherapeutic are just a few of the drug delivery methods in which they are used. Cubosomes show tremendous potential in drug nanoformulations for cancer therapeutics because of their prospective advantages, which include high drug dispersal due to the structure of the cubic, large surface area, a relatively simple manufacturing process, biodegradability, ability to encapsulate hydrophobic, hydrophilic, and amphiphilic compounds, targeted and controlled release of bioactive agents, and biodegradability of lipids. The most typical technique of preparation is the simple emulsification of a monoglyceride with a polymer, followed by sonication and homogenisation. Top-down and bottom-up are two different sorts of preparation techniques. This review will critically analyse the composition, preparation techniques, drug encapsulation approaches, drug loading, release mechanism and applications relevant to cubosomes. Furthermore, the challenges faced in optimising various parameters to enhance the loading capacities and future potentialities are also addressed.

Design, physicochemical characterisation, and in vitro cytotoxicity of cisplatin-loaded PEGylated chitosan injectable nano / sub-micron crystals.

The study aimed to develop cisplatin-loaded PEGylated chitosan nanoparticles. The optimal batch of cisplatin-loaded PEGylated chitosan nanoparticles had a + 49.9 mV zeta potential, PDI of 0.347, and % PDI of 58.9. Nanoparticle zeta size was 741.4 z. d.nm, the size in diameter was 866.7 ± 470.5 nm, and nanoparticle conductivity in colloidal solution was 0.739 mS/cm. Differential scanning calorimetry (DSC) revealed that cisplatin-loaded PEGylated chitosan nanoparticles had sharp endothermic peaks at temperatures at 168.6 °C. The thermogravimetric analysis (TGA) showed the weight loss of cisplatin-loaded PEGylated chitosan nanoparticles, which was observed as 95% at 262.76 °C. XRD investigation on cisplatin-loaded PEGylated chitosan nanoparticles exhibited distinct peaks at 2θ as 9.7°, 20.4°, 22.1°, 25.3°, 36.1°, 38.1°, 39.5°, 44.3°, and 64.5°, confirming crystalline structure. The 1H NMR analysis showed the fingerprint region of cisplatin-loaded PEGylated chitosan nanoparticles as 0.85, 1.73, and 1.00 ppm in the proton dimension and de-shielded proton peaks appeared at 3.57, 3.58, 3.58, 3.59, 3.65, 3.67, 3,67, 3,67, 3.70, 3.71, 3.77, 3.78 and 4.71 ppm. The 13C NMR spectrum showed specified peaks at 63.18, 69.20, and 70.77 ppm. The FT-IR spectra of cisplatin loaded PEGylated nanoparticles show the existence of many fingerprint regions at 3186.52, 2931.68, 1453.19, 1333.98, 1253.71, 1085.19, 1019.60, 969.98, 929.53, 888.80, 706.13, and 623.67 cm-1. The drug release kinetics of cisplatin loaded PEGylated chitosan nanoparticles showed zero order kinetics with 48% of drug release linearity fashion which has R2 value of 0.9778. Studies on the MCF-7 ATCC human breast cancer cell line in vitro revealed that the IC50 value 82.08 µg /mL. Injectable nanoparticles had good physicochemical and cytotoxic properties. This method is novel since the application of the PEGylation processes leads to an increased solubility of chitosan nanoparticles at near neutral pH.

Production, Characterization, and In Vitro and In Vivo Studies of Nanoemulsions Containing St. John's Wort Plant Constituents and Their Potential for the Treatment of Depression.

The current project was designed to prepare an oil-in-water (oil/water) hypericin nanoemulsion using eucalyptus oil for the preparation of an oil phase with chitosan as an emulsion stabilizer. The study might be a novelty in the field of pharmaceutical sciences, especially in the area of formulation development. Tween® 80 (Polysorbate) was used as the nonionic surfactant. The nanoemulsion was prepared by using the homogenization technique, followed by its physicochemical evaluation. The surface morphological studies showed the globular structure has a nano-sized diameter, as confirmed by zeta size analysis. The zeta potential analysis confirmed a positive surface charge that might be caused by the presence of chitosan in the formulation. The pH was in the range of 5.14 to 6.11, which could also be compatible with the range of nasal pH. The viscosity of the formulations was found to be affected by the concentration of chitosan (F1-11.61 to F4-49.28). The drug release studies showed that the presence of chitosan greatly influenced the drug release, as it was noticed that formulations having an elevated concentration of chitosan release lesser amounts of the drug. The persistent stress in the mouse model caused a variety of depressive- and anxiety-like behaviors that can be counteracted by chemicals isolated from plants, such as sulforaphane and tea polyphenols. In the behavioral test and source performance test, hypericin exhibited antidepressant-like effects. The results show that the mice treated for chronic mild stress had a considerably higher preference for sucrose after receiving continuous hypericin for 4 days (p = 0.0001) compared to the animals administered with normal saline (p ≤ 0.0001) as well as the naïve group (p ≤ 0.0001). In conclusion, prepared formulations were found to be stable and can be used as a potential candidate for the treatment of depression.

One-pot green synthesis of gold nanoparticles using Sarcophyton crassocaule, a marine soft coral: Assessing biological potentialities of antibacterial, antioxidant, anti-diabetic and catalytic degradation of toxic organic pollutants.

Marine bio-resources are being extensively researched as a priceless supply of substances with therapeutic potential. This work report the first time attempt made towards the green synthesis of gold nanoparticles (AuNPs) using the aqueous extract of marine soft coral (SCE), Sarcophyton crassocaule. The synthesis was conducted under optimized conditions and the visual coloration of reaction mixture changed from yellowish to ruby red at 540 nm. The electron microscopic (TEM, SEM) studies exhibited spherical and oval shaped SCE-AuNPs in the size ranges of 5-50 nm. The organic compounds present in SCE were primarily responsible for the biological reduction of gold ions validated by FT-IR while the zeta potential confirmed the overall stability of SCE-AuNPs. The synthesized SCE-AuNPs exhibited variety of biological efficacies like antibacterial, antioxidant and anti-diabetic in nature. The biosynthesized SCE-AuNPs demonstrated remarkable bactericidal efficacy against clinically significant bacterial pathogens with inhibition zones of mm. Additionally, SCE-AuNPs exhibited greater antioxidant capacity in terms of DPPH: 85 ± 0.32% and RP: 82 ± 0.41%). The ability of enzyme inhibition assays to inhibit α-amylase (68 ± 0.21%) and α-glucosidase (79 ± 0.2%) was quite high. The study also highlighted the spectroscopic analysis of the biosynthesized SCE-AuNPs' catalytic effectiveness of 91% in the reduction processes of the perilous organic dyes, exhibiting pseudo-first order kinetics.

Induction of Innate and Adaptive Immune Response against Recombinant HBsAg Protein Entrapped in Docosahexaenoic Acid Nanovesicles through Biomarkers.

The present study focused on demonstrating the induction of humoral and cell-mediated immunity through the establishment of a cytokine network. We hypothesized the anti-inflammatory, pro-inflammatory, and IgE antibody levels after vaccination with lyophilized recombinant HBsAg-loaded docosahexaenoic acid nanovesicles (LRPDNV), and the efficacy compared well with standard commercial recombinant hepatitis B vaccine. The cytokine network was efficiently regulated by striking a balance between pro-inflammatory cytokines IL-6, IL-8R, and IL-12 and anti-inflammatory cytokines such as IL-2, IL-4, IL-10, and IFN-γ immune response on the 14th and 30th day after primary and booster immunization. The acute phase protein CRP level was increased due to IL-6 after immunizing with LRPDNV. On the other hand, the IgE level was not significantly increased to induce any allergic reactions after immunization with LRPDNV. The study concluded that after immunizing with LRPDNV, a significant immunological response was established, implying that DHA nanovesicles have significant potential as an adjuvant method for delivering recombinant HBsAg protein. On the other hand, following immunization with LRPDNV, the IgE level was not noticeably elevated enough to cause any adverse reactions. The study concludes that a robust immune response was developed after immunizing with LRPDNV and suggests that DHA nanovesicles have much potential to deliver recombinant HBsAg protein.

Assessment of Binary Agarose-Carbopol Buccal Gels for Mucoadhesive Drug Delivery: Ex Vivo and In Vivo Characterization.

Agarose (AG) is a naturally occurring biocompatible marine seaweed extract that is converted to hydrocolloid gel in hot water with notable gel strength. Currently, its mucoadhesion properties have not been fully explored. Therefore, the main aim of this study was to evaluate the mucoadhesive potential of AG binary dispersions in combination with Carbopol 934P (CP) as mucoadhesive gel preparations. The gels fabricated via homogenization were evaluated for ex vivo mucoadhesion, swelling index (SI), dissolution and stability studies. The mucoadhesive properties of AG were concentration dependent and it was improved by the addition of CP. Maximum mucoadhesive strength (MS) (27.03 g), mucoadhesive flow time (FT) (192.2 min), mucoadhesive time in volunteers (MT) (203.2 min) and SI (23.6% at 4 h) were observed with formulation F9. The mucoadhesive time investigated in volunteers (MT) was influenced by AG concentration and was greater than corresponding FT values. Formulations containing 0.3%, w/v AG (F3 and F9) were able to sustain the release (~99%) for both drugs till 3 h. The optimized formulation (F9) did not evoke any inflammation, irritation or pain in the buccal cavity of healthy volunteers and was also stable up to 6 months. Therefore, AG could be considered a natural and potential polymer with profound mucoadhesive properties to deliver drugs through the mucosal route.

Development and optimization of a tamsulosin nanostructured lipid carrier loaded with saw palmetto oil and pumpkin seed oil for treatment of benign prostatic hyperplasia.

Benign prostatic hyperplasia (BPH) is a nonmalignant growth of the prostate tissue and causes urinary tract symptoms. To provide effective treatment, tamsulosin (TM), saw palmetto oil (SP), and pumpkin seed oil (PSO) were combined and fabricated a nanostructured lipid carrier (NLC) as TM-S/P-NLC using experimental design. The purpose was to enhance the permeation and therapeutic activity of TM; combining TM with SP and PSO in an NLC generates a synergistic activity. An optimized TM-S/P-NLC was obtained after statistical analysis, and it had a particle size, percentage of entrapment efficiency, and steady-state flux of 102 nm, 65%, and 4.5 µg/cm2.min, respectively. Additionally, the optimized TM-S/P-NLC had spherical particles with a more or less uniform size and a stability score of 95%, indicating a high level of stability. The in vitro release studies exhibited the optimized TM-S/P-NLC had the maximum release profile for TM (81 ± 4%) as compared to the TM-NLCs prepared without the addition of S/P oil (59 ± 3%) or the TM aqueous suspension (30 ± 5%). The plasma TM concentration-time profile for the TM-S/P-NLC and the marketed TM tablets indicated that when TM was supplied in a TM-S/P-NLC, the pharmacokinetic profile of the drug was improved. Simultaneously, in vivo therapeutic efficacy studies also showed favorable results for the TM-S/P-NLC in terms of the prostate weight and prostate index following treatment of BPH. Based on the findings of present study, we suggest that in the future, the TM-S/P-NLC could be a novel drug delivery system for treating BPH.

Design, Characterization, and Immune Augmentation of Docosahexaenoic Acid Nanovesicles as a Potential Delivery System for Recombinant HBsAg Protein.

Recombinant HBsAg-loaded docosahexaenoic acid nanovesicles were successfully developed, lyophilized (LRPDNV) and characterized for their physico-chemical properties. The zetapotential (ZP) of LRPDNV was -60.4 ± 10.4 mV, and its polydispersity (PDI) was 0.201, with a % PDI of 74.8. The particle sizes of LRPDNV were 361.4 ± 48.24 z. d.nm and 298.8 ± 13.4 r.nm. The % mass (r.nm) of LRPDNV in a colloidal injectable system was 50, its mobility value was -3.417 µm cm/Vs, while the conductivity of the particles was 0.728 (mS/cm). Transmission electron microscopic (TEM) analysis showed smooth morphological characteristics of discrete spherical LRPDNV. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) of LRPDNV revealed that LRPDNV is thermostable. The X-ray diffraction (XRD) studies showed a discrete crystalline structure of LRPDNV at 2θ. Nuclear magnet resonance (NMR) studies (1H-NMR and 13C-NMR spectrum showed the discrete structure of LRPDNV. The immunogenicity study was performed by antibody induction technique. The anti-HBs IgG levels were elevated in Wistar rats; the antibody induction was observed more in the product (LRPDNV) treatment group when compared to the standard vaccine group. The level of antibodies on the 14th and 30th day was 6.3 ± 0.78 U/mL and 9.24 ± 1.76 U/mL in the treatment and standard vaccine groups, respectively. Furthermore, the antibody level on the 30th day in the treatment group was 26.66 ± 0.77 U/mL, and in the standard vaccine group, the antibody level was 23.94 ± 1.62 U/mL. The LRPDNV vaccine delivery method released HBsAg sustainably from the 14th to the 30th day. The results of this study indicate the successful formulation of DHA nanovesicles which have great potential as an adjuvant system for the delivery of recombinant HBsAg protein.

Development and Optimization of Methylcellulose-Based Nanoemulgel Loaded with Nigella sativa Oil for Oral Health Management: Quadratic Model Approach.

The present study aimed to develop a local dental nanoemulgel formulation of Nigella sativa oil (NSO) for the treatment of periodontal diseases. NSO purchased from a local market was characterized using a GC-MS technique. A nanoemulsion containing NSO was prepared and incorporated into a methylcellulose gel base to develop the nanoemulgel formulation. The developed formulation was optimized using a Box-Behnken statistical design (quadratic model) with 17 runs. The effects of independent factors, such as water, oil, and polymer concentrations, were studied on two dependent responses, pH and viscosity. The optimized formulation was further evaluated for droplet size, drug release, stability, and antimicrobial efficacy. The developed formulation had a pH of 7.37, viscosity of 2343 cp, and droplet size of 342 ± 36.6 nm. Sustained release of the drug from the gel for up to 8 h was observed, which followed Higuchi release kinetics with non-Fickian diffusion. The developed nanoemulgel formulation showed improved antimicrobial activity compared to the plain NSO. Given the increasing emergence of periodontal diseases and antimicrobial resistance, an effective formulation based on a natural antibacterial agent is warranted as a dental therapeutic agent.

Stealth Liposomes (PEGylated) Containing an Anticancer Drug Camptothecin: In Vitro Characterization and In Vivo Pharmacokinetic and Tissue Distribution Study.

Numerous attempts to overcome the poor water solubility of cam ptothecin (CPT) by various nano drug delivery systems are described in various sources in the literature. However, the results of these approaches may be hampered by the incomplete separation of free CPT from the formulations, and this issue has not been investigated in detail. This study aimed to promote the solubility and continuous delivery of CPT by developing long-lasting liposomes using various weights (M.W. 2000 and 5000 Daltons) of the hydrophilic polymer polyethylene glycol (PEG). Conventional and PEGylated liposomes containing CPT were formulated via the lipid film hydration method (solvent evaporation) using a rotary flash evaporator after optimising various formulation parameters. The following physicochemical characteristics were investigated: surface morphology, particle size, encapsulation efficiency, in vitro release, and formulation stability. Different molecular weights of PEG were used to improve the encapsulation efficiency and particle size. The stealth liposomes prepared with PEG5000 were discrete in shape and with a higher encapsulation efficiency (83 ± 0.4%) and a prolonged rate of drug release (32.2% in 9 h) compared with conventional liposomes (64.8 ± 0.8% and 52.4%, respectively) and stealth liposomes containing PEG2000 (79.00 ± 0.4% and 45.3%, respectively). Furthermore, the stealth liposomes prepared with PEG5000 were highly stable at refrigeration temperature. Significant changes were observed using various pharmacokinetic parameters (mean residence time (MRT), half-life, elimination rate, volume of distribution, clearance, and area under the curve) of stealth liposomes containing PEG2000 and PEG5000 compared with conventional liposomes. The stealth liposomes prepared with PEG5000 showed promising results with a slow rate of release over a long period compared with conventional liposomes and liposomes prepared with PEG2000, with altered tissue distribution and pharmacokinetic parameters.

Characterization of cisplatin-loaded chitosan nanoparticles and rituximab-linked surfaces as target-specific injectable nano-formulations for combating cancer.

The present study was carried out to develop cisplatin-loaded chitosan nanoparticles (CCNP) and cisplatin-loaded chitosan nanoparticle surface linked to rituximab (mAbCCNP) as targeted delivery formulations. The two formulations (CCNP and mAbCCNP) exhibited significant physicochemical properties. The zetapotential (ZP) values of CCNP and mAbCCNP were 30.50 ± 5.64 and 26.90 ± 9.09 mV, respectively; while their particle sizes were 308.10 ± 1.10 and 349.40 ± 3.20 z.d.nm, respectively. The poly dispersity index (PDI) of CCNP was 0.257 ± 0.030 (66.6% PDI), while that of mAbCCNP was 0.444 ± 0.007 (57.60% PDI). Differential scanning calorimetry (DSC) revealed that CCNP had endothermic peaks at temperatures ranging from 135.50 to 157.69 °C. A sharp exothermic peak was observed at 95.79 °C, and an endothermic peak was observed at 166.60 °C. The XRD study on CCNP and mAbCCNP revealed distinct peaks at 2θ. Four peaks at 35.38°, 37.47°, 49.29°, and 59.94° corresponded to CCNP, while three distinct peaks at 36.6°, 49.12°, and 55.08° corresponded to mAbCCNP. The in vitro release of cisplatin from nanoparticles followed zero order kinetics in both CCNP and mAbCCNP. The profile for CCNP showed 43.80% release of cisplatin in 6 h (R2 = 0.9322), indicating linearity of release with minimal deviation. However, the release profile of mAbCCNP showed 22.52% release in 4 h (R2 = 0.9416), indicating linearity with sustained release. In vitro cytotoxicity studies on MCF-7 ATCC human breast cancer cell line showed that CCNP exerted good cytotoxicity, with IC50 of 4.085 ± 0.065 µg/mL. However, mAbCCNP did not elicit any cytotoxic effect. At a dose of 4.00 µg/mL cisplatin induced early apoptosis and late apoptosis, chromatin condensation, while it produced secondary necrosis at a dose of 8.00 µg/mL. Potential delivery system for cisplatin CCNP and mAbCCNP were successfully formulated. The results indicated that CCNP was a more successful formulation than mAbCCNP due to lack of specificity of rituximab against MCF-7 ATCC human breast cancer cells.

Formulation and evaluation of injectable dextran sulfate sodium nanoparticles as a potent antibacterial agent.

The purpose of this study was to develop a novel nano antibacterial formulation of dextran sulfate sodium polymer. The dextran sulfate sodium (DSS) nanoparticles were formulated with gelation technique. The nanoparticles exhibited significant physicochemical and effective antibacterial properties, with zeta potential of - 35.2 mV, particle size of 69.3 z d nm, polydispersity index of 0.6, and percentage polydispersity of 77.8. The DSS nanoparticles were stable up to 102 °C. Differential scanning calorimetry revealed an endothermic peak at 165.77 °C in 12.46 min, while XRD analysis at 2θ depicted various peaks at 21.56°, 33.37°, 38.73°, 47.17°, 52.96°, and 58.42°, indicating discrete nanoparticle formation. Antibacterial studies showed that the DSS nanoparticles were effective against Gram-positive and Gram-negative bacteria. The minimum inhibitory concentrations of DSS nanoparticles for Bacillus subtilis (B. subtilis), Staphylococcus aureus (S. aureus), Streptococcus pyogenes (S. pyogenes), Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa), Klebsiella pneumoniae (K. pneumoniae) and Proteus vulgaris (P. vulgaris) were 150, 200, 250, 150, 200, 250, 250 µg/mL, respectively. The antibacterial effects of DSS nanoparticles were in the order E. coli (26 ± 1.2 mm) at 150 µg/mL > S. pyogenes (24.6 ± 0.8 mm) at 250 µg/mL > B. subtilis (23.5 ± 2 mm) at 150 µg/mL > K. pneumoniae (22 ± 2 mm) at 250 µg/mL > P. aeruginosa (21.8 ± 1 mm) at 200 µg/mL > S. aureus (20.8 ± 1 mm) at 200 µg/mL > P. vulgaris (20.5 ± 0.9 mm) at 250 µg/mL. These results demonstrate the antibacterial potency of DSS injectable nanoparticles.

Pluronic® F127-mediated control of insulin release rates from NPH microcrystals and blood glucose depression in STZ-induced diabetic rats.

Introduction: Neutral protamine Hagedorn (NPH) insulin is an intermediate-acting basal insulin with a long history of clinical use, consisting native human insulin. Its rather undesirable action profile, characterized by a peak release within a few hours, followed by insufficient insulin delivery upon a single subcutaneous (s.c.) dose, is well-documented. This may have been caused by the inherent microcrystal structure involving the basic peptide protamine, as well as the presence of tissue enzyme activities that readily act on protamine at the injection site. This issue may be circumvented by utilizing thermosensitive, erodible Pluronic F127 (PF127) to modulate the kinetics of insulin release from NPH over a period of 24 hours in which the hydrogel is completely eroded. Methods: Previously, we have shown that insulin release rates in vitro from NPH/PF127 formulations (0-25% PF127) markedly reduced the initial insulin release, especially in the presence of enzyme activity that selectively degraded protamine at 1-5 U/mL. Insulin release over the course of 20 hours was better modulated in the presence of increasing PF127 content. In this study, the insulin formulations (0, 20, and 25% PF127) were administered s.c. (4 U/kg) to streptozotocin (STZ)-induced diabetic rats and blood glucose levels were monitored over 24 hours. Results: In vivo blood glucose depression profiles in STZ-induced diabetic rats exhibited a similar pattern of control to in vitro data at the single s.c. dose of 4 U/kg, apparently extending the duration of action of NPH over a 24-hour period in the presence of PF127. Conclusion: Our findings suggest that the undesirable kinetics of insulin release from NPH is significantly influenced by tissue enzyme activity and that the presence of PF127 provided a timely modulation of insulin release from NPH microcrystals in the STZ-induced diabetic rat model.

Nanocarriers-Assisted Needle-Free Vaccine Delivery Through Oral and Intranasal Transmucosal Routes: A Novel Therapeutic Conduit.

Drug delivery using oral route is the most popular, convenient, safest and least expensive approach. It includes oral transmucosal delivery of bioactive compounds as the mucosal cavity offers an intriguing approach for systemic drug distribution. Owing to the dense vascular architecture and high blood flow, oral mucosal layers are easily permeable and can be an ideal site for drug administration. Recently, the transmucosal route is being investigated for other therapeutic candidates such as vaccines for their efficient delivery. Vaccines have the potential to trigger immune reactions and can act as both prophylactic and therapeutic conduit to a variety of diseases. Administration of vaccines using transmucosal route offers multiple advantages, the most important one being the needle-free (non-invasive) delivery. Development of needle-free devices are the most recent and pioneering breakthrough in the delivery of drugs and vaccines, enabling patients to avoid needles, reducing anxiety, pain and fear as well as improving compliance. Oral, nasal and aerosol vaccination is a novel immunization approach that utilizes a nanocarrier to administer the vaccine. Nanocarriers improve the bioavailability and serve as adjuvants to elicit a stronger immune response, resulting in increased effectiveness of vaccination. Drugs and vaccines with lower penetration abilities can also be delivered transmucosally while maintaining their biological function. The development of micro/nanocarriers for transmucosal delivery of macromolecules, vaccines and other substances is currently drawing much attention and a number of studies were performed recently. This comprehensive review is aimed to summarize the most recent investigations on needle-free and non-invasive approaches for the delivery of vaccines using oral transmucosal route, their strengths and associated challenges. The oral transmucosal vaccine delivery by nanocarriers is the most upcoming advancement in efficient vaccine delivery and this review would help further research and trials in this field.