Assessing the impact of ultra-thin diamond nanothreads on the glass transition temperature of a bituminous binder.

Low-temperature cracking and rutting are the most destructive problems of bitumen that hinder the application of high-performance bitumen engineering, which is dependent on its glass transition temperature (Tg). Through in silico studies, this work has systematically investigated the Tg of a bituminous binder with the addition of diamond nanothread (DNT) fillers with varying filler content, alignment, distribution, and functional groups. In general, the glass transition phenomenon of the bitumen is determined by the mobility of its constituent molecules. Tg is found to increase gradually with the increase in the weight percentage of DNT and then decreases when the weight percentage exceeds 5.05 wt%. The enhancement effect on Tg is weakened when DNTs are distributed vertically or functionalized with functional groups. Specifically, DNT fillers induce inhomogeneity, which promotes the motion of small molecules while hindering the motion of large molecules. The aggregation of DNTs and the molecular environment in the vicinity of DNTs directly affect Tg. In summary, aggregation and adhesion are the dominant mechanisms affecting the mobility of the constituent molecules in the DNT/bitumen system and thus its glass transition temperature. This work provides in-depth insights into the underlying mechanisms for the glass transition of a bituminous binder, which could serve as theoretical guidance for tuning the low-temperature performance of the bituminous binder.

A Data-Driven Based Response Reconstruction Method of Plate Structure with Conditional Generative Adversarial Network.

Structural-response reconstruction is of great importance to enrich monitoring data for better understanding of the structural operation status. In this paper, a data-driven based structural-response reconstruction approach by generating response data via a convolutional process is proposed. A conditional generative adversarial network (cGAN) is employed to establish the spatial relationship between the global and local response in the form of a response nephogram. In this way, the reconstruction process will be independent of the physical modeling of the engineering problem. The validation via experiment of a steel frame in the lab and an in situ bridge test reveals that the reconstructed responses are of high accuracy. Theoretical analysis shows that as the sensor quantity increases, reconstruction accuracy rises and remains when the optimal sensor arrangement is reached.

Quantum Shell in a Shell: Engineering Colloidal Nanocrystals for a High-Intensity Excitation Regime.

Many optoelectronic processes in colloidal semiconductor nanocrystals (NCs) suffer an efficiency decline under high-intensity excitation. This issue is caused by Auger recombination of multiple excitons, which converts the NC energy into excess heat, reducing the efficiency and life span of NC-based devices, including photodetectors, X-ray scintillators, lasers, and high-brightness light-emitting diodes (LEDs). Recently, semiconductor quantum shells (QSs) have emerged as a promising NC geometry for the suppression of Auger decay; however, their optoelectronic performance has been hindered by surface-related carrier losses. Here, we address this issue by introducing quantum shells with a CdS-CdSe-CdS-ZnS core-shell-shell-shell multilayer structure. The ZnS barrier inhibits the surface carrier decay, which increases the photoluminescence (PL) quantum yield (QY) to 90% while retaining a high biexciton emission QY of 79%. The improved QS morphology allows demonstrating one of the longest Auger lifetimes reported for colloidal NCs to date. The reduction of nonradiative losses in QSs also leads to suppressed blinking in single nanoparticles and low-threshold amplified spontaneous emission. We expect that ZnS-encapsulated quantum shells will benefit many applications exploiting high-power optical or electrical excitation regimes.

Colloidal Nanoribbons: From Infrared to Visible.

Using the cation-exchange method, colloidal PbS nanoribbons are converted completely into CdS nanoribbons. This process expands the emission spectrum of the nanoribbons from infrared to visible. The morphology of nanoribbons remains the same after cation exchange, but the crystal structure changes from rock salt to zincblende. CdS nanoribbons exhibit blue band-edge photoluminescence under ultraviolet-light excitation. Cathodoluminescence spectroscopy of the CdS nanoribbons shows multicolor (blue, green, and red) emissions. Further time-resolved photoluminescence spectroscopy studies show that the lifetime of the midgap states is more than 2 orders of magnitude longer than that of the band-edge states.

Dielectrically Confined Stable Excitons in Few-Atom-Thick PbS Nanosheets.

Two-dimensional colloidal PbS nanosheets exhibit more than one order of magnitude larger exciton binding energy than their bulk counterpart, making it possible to generate stable excitons at room temperature. It is experimentally revealed that the binding energy of the exciton increases from 26 to 68 meV as the thickness of the PbS nanosheet decreases from 4.7 to 1.2 nm. The dielectric confinement of the exciton plays a critical role in the binding-energy enhancement. The large binding energy results in a fast thickness-dependent exciton radiative recombination rate, confirmed experimentally.

Using Interaction of Nano Dipoles to Control the Growth of Nanorods.

Charged facets of a nanocrystal can form an intrinsic nanometer-size electric dipole. When the spacing between these nano dipoles is adjusted, the dipolar interaction energy is tuned from a fraction to a multiple of the thermal energy. Consequently, the one-dimensional oriented attachment can be switched on or off, as is the growth of nanorods. This kinetically controlled growth is achieved at relatively low reaction temperatures while the thermodynamically controlled growth dominates at higher temperatures. The synthesized PbSe nanorods are branchless, exhibiting a single-exponential photoluminescence decay trace with an e-folding lifetime of 1.3 µs and a photoluminescence quantum yield of 35%.

Topological, Valleytronic, and Optical Properties of Monolayer PbS.

A PbS monolayer is demonstrated to be a novel platform for topological, valleytronic, and optical phenomena. Compressive strain can turn the trivial monolayer into a topological insulator. Optical pumping can facilitate charge, spin, and valley Hall effects tunable by external strain and light ellipticity. Similar results apply to other IV-VI semiconductors.

Growth of colloidal PbS nanosheets and the enhancement of their photoluminescence.

Dual photoluminescence peaks observed during the synthesis of colloidal PbS nanosheets reveal their growth mechanism - two-dimensional attachments of the quantum dots. Well-grown nanosheets show the photoluminescence linewidth of 95 meV at room temperature. Aged nanosheets in toluene have enhanced photoluminescence with intensity improved by an order of magnitude.

Crystalline characteristics of cellulose fiber and film regenerated from ionic liquid solution.

Regenerated cellulose fiber, fiber extrudate, and film were produced from cellulose solution prepared with raw pulp and ionic liquid solvent 1-butyl-3-methylimidazolium chloride ([BMIM]Cl). Spinning setting was based on a dry-jet and wet-spun approach including extrusion, coagulation, drawing, drying, and winding. Crystallization of the experimental fiber, fiber extrudate, and film was evaluated using a technique of wide angle X-ray diffraction (WAXD). Crystallinity index, crystallite size, and crystal orientation factor were calculated and compared among these samples. Influence of die shape, die dimension, and drawing speed on the regenerated cellulose crystallinity was discussed. The study indicated that the pulp cellulose was a Cellulose I type structure. The cellulose regeneration from the [BMIM]Cl solution completed a transformation from this intermediate phase to a final Cellulose II phase. The die shape and dimension and drawing speed were all important factors affecting the crystallinity of regenerated cellulose fiber and film.

Bright infrared quantum-dot light-emitting diodes through inter-dot spacing control.

Infrared light-emitting diodes are currently fabricated from direct-gap semiconductors using epitaxy, which makes them expensive and difficult to integrate with other materials. Light-emitting diodes based on colloidal semiconductor quantum dots, on the other hand, can be solution-processed at low cost, and can be directly integrated with silicon. However, so far, exciton dissociation and recombination have not been well controlled in these devices, and this has limited their performance. Here, by tuning the distance between adjacent PbS quantum dots, we fabricate thin-film quantum-dot light-emitting diodes that operate at infrared wavelengths with radiances (6.4 W sr(-1) m(-2)) eight times higher and external quantum efficiencies (2.0%) two times higher than the highest values previously reported. The distance between adjacent dots is tuned over a range of 1.3 nm by varying the lengths of the linker molecules from three to eight CH(2) groups, which allows us to achieve the optimum balance between charge injection and radiative exciton recombination. The electroluminescent powers of the best devices are comparable to those produced by commercial InGaAsP light-emitting diodes. By varying the size of the quantum dots, we can tune the emission wavelengths between 800 and 1,850 nm.

Surfactant ligand removal and rational fabrication of inorganically connected quantum dots.

A novel method is reported to create inorganically connected nanocrystal (NC) assemblies for both II-VI and IV-VI semiconductors by removing surfactant ligands using (NH4)2S. This surface modification process differs from ligand exchange methods in that no new surfactant ligands are introduced and the post-treated NC surfaces are nearly bare. The detailed mechanism study shows that the high reactivity between (NH4)2S and metal-surfactant ligand complexes enables the complete removal of surfactant ligands in seconds and converts the NC metal-rich shells into metal sulfides. The post-treated NCs are connected through metal-sulfide bonding and form a larger NCs film assembly, while still maintaining quantum confinement. Such "connected but confined" NC assemblies are promising new materials for electronic and optoelectronic devices.

Control of electron transfer from lead-salt nanocrystals to TiO2.

The roles of solvent reorganization energy and electronic coupling strength on the transfer of photoexcited electrons from PbS nanocrystals to TiO(2) nanoparticles are investigated. We find that the electron transfer depends only weakly on the solvent, in contrast to the strong dependence in the nanocrystal-molecule system. This is ascribed to the larger size of the acceptor in this system, and is accounted for by Marcus theory. The electronic coupling of the PbS and TiO(2) is varied by changing the length, aliphatic and aromatic structure, and anchor groups of the linker molecules. Shorter linker molecules consistently lead to faster electron transfer. Surprisingly, linker molecules of the same length but distinct chemical structures yield similar electron transfer rates. In contrast, the electron transfer rate can vary dramatically with different anchor groups.

Kinetics modeling of dynamic pyrolysis of bagasse fibers.

The thermal decomposition mechanism of raw and treated bagasse fibers was modeled with three parallel independent first-order reactions. The kinetic parameters and pseudo components which best fit the experimental dynamic pyrolysis rate of bagasse was determined by means of the Matlab program using the least-square method. The calculated rate of thermal decomposition for each bagasse sample was consistent with experimental pyrolysis rate very well. A method was adopted to calculate the contents of cellulose, hemicelluloses, and lignin for bagasse fiber based on the dynamic pyrolysis model. The calculated contents of the untreated bagasse fiber agreed very well with some reported values from the literature. The effect of treatment conditions on the bagasse fiber compositions was also studied. From the three-dimensional plot for each of the three components, it could be observed that bagasse fibers treated under the intermediate alkaline condition could achieve the higher content of cellulose.

Photogenerated exciton dissociation in highly coupled lead salt nanocrystal assemblies.

Internanocrystal coupling induced excitons dissociation in lead salt nanocrystal assemblies is investigated. By combining transient photoluminescence spectroscopy, grazing incidence small-angle X-ray scattering, and time-resolved electric force microscopy, we show that excitons can dissociate, without the aid of an external bias or chemical potential gradient, via tunneling through a potential barrier when the coupling energy is comparable to the exciton binding energy. Our results have important implications for the design of nanocrystal-based optoelectronic devices.

Role of solvent dielectric properties on charge transfer from PbS nanocrystals to molecules.

Transfer of photoexcited charge from PbS nanocrystals to ligand molecules is investigated in different solvents. We find that the charge transfer rate increases dramatically with solvent dielectric constant. This trend is accounted for by a modified Marcus theory that incorporates only static dielectric effects. The choice of solvent allows significant control of the charge transfer process. As an important example, we find that PbS nanocrystals dispersed in water exhibit charge transfer rates 1000 times higher than the same nanocrystals in organic solvent. Rapid charge extraction will be important to efficient nanocrystal-based photovoltaic and photodetector devices.

PbSe nanocrystal excitonic solar cells.

We report the design, fabrication, and characterization of colloidal PbSe nanocrystal (NC)-based photovoltaic test structures that exhibit an excitonic solar cell mechanism. Charge extraction from the NC active layer is driven by a photoinduced chemical potential energy gradient at the nanostructured heterojunction. By minimizing perturbation to PbSe NC energy levels and thereby gaining insight into the "intrinsic" photovoltaic properties and charge transfer mechanism of PbSe NC, we show a direct correlation between interfacial energy level offsets and photovoltaic device performance. Size dependent PbSe NC energy levels were determined by cyclic voltammetry and optical spectroscopy and correlated to photovoltaic measurements. Photovoltaic test structures were fabricated from PbSe NC films sandwiched between layers of ZnO nanoparticles and PEDOT:PSS as electron and hole transporting elements, respectively. The device current-voltage characteristics suggest a charge separation mechanism that is distinct from previously reported Schottky devices and consistent with signatures of excitonic solar cells. Remarkably, despite the limitation of planar junction structure, and without film thickness optimization, the best performing device shows a 1-sun power conversion efficiency of 3.4%, ranking among the highest performing NC-based solar cells reported to date.

Electrogenerated chemiluminescence from PbS quantum dots.

We report the first observation of electrogenerated chemiluminescence (ECL) from PbS quantum dots (QDs). Different ECL intensities are observed for different ligands used to passivate the QDs, which indicates that ECL is sensitive to surface chemistry, with the potential to serve as a powerful probe of surface states and charge transfer dynamics in QDs. In particular, passivation of the QD surfaces with trioctylphosphine (TOP) increases ECL intensity by 3 orders of magnitude when compared to passivation with oleic acid alone. The observed overlap of the ECL and photoluminescence spectra suggests a significant reduction of deep surface trap states from the QDs passivated with TOP.

Electron injection from colloidal PbS quantum dots into titanium dioxide nanoparticles.

Injection of photoexcited electrons from colloidal PbS quantum dots into TiO(2) nanoparticles is investigated. The electron affinity and ionization potential of PbS quantum dots, inferred from cyclic voltammetry measurements, show strong size dependence due to quantum confinement. On the basis of the measured energy levels, photoexcited electrons should transfer efficiently from the quantum dots into TiO(2) only for quantum-dot diameter below approximately 4.3 nm. Continuous-wave fluorescence spectra and fluorescence transients of PbS quantum dots coupled to titanium dioxide nanoparticles are consistent with electron transfer for small quantum dots. The measured electron transfer time is surprisingly slow ( approximately 100 ns), and implications of this for future photovoltaics will be discussed. Initial results obtained from solar cells sensitized with PbS quantum dots are presented.