Network-based approach for drug repurposing against mpox.

The current outbreak of mpox presents a significant threat to the global community. However, the lack of mpox-specific drugs necessitates the identification of additional candidates for clinical trials. In this study, a network medicine framework was used to investigate poxviruses-human interactions to identify potential drugs effective against the mpox virus (MPXV). The results indicated that poxviruses preferentially target hubs on the human interactome, and that these virally-targeted proteins (VTPs) tend to aggregate together within specific modules. Comorbidity analysis revealed that mpox is closely related to immune system diseases. Based on predicted drug-target interactions, 268 drugs were identified using the network proximity approach, among which 23 drugs displaying the least side-effects and significant proximity to MPXV were selected as the final candidates. Lastly, specific drugs were explored based on VTPs, differentially expressed proteins, and intermediate nodes, corresponding to different categories. These findings provide novel insights that can contribute to a deeper understanding of the pathogenesis of MPXV and development of ready-to-use treatment strategies based on drug repurposing.

Venus Flytrap-Inspired Data-Center-Free Fast-Responsive Soft Robots Enabled by 2D Ni3(HITP)2 MOF and Graphite.

The rapid and responsive capabilities of soft robots in perceiving, assessing, and reacting to environmental stimuli are highly valuable. However, many existing soft robots, designed to mimic humans and other higher animals, often rely on data centers for the modulation of mechanoelectrical transduction and electromechanical actuation. This reliance significantly increases system complexity and time delays. Herein, drawing inspiration from Venus flytraps, a soft robot employing a power modulation strategy is presented for active stimulus reaction, eliminating the need for a data center. This robot achieves mechanoelectrical transduction through Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 (Ni3(HITP)2) metal-organic framework (MOF) with an ultralow time delay (256 ns) and electromechanical actuation via graphite. The Joule heating effect in graphite is effectively modulated by Ni3(HITP)2 before and after the presence of pressure, thus enabling the stimulus reaction of soft robots. As demonstrated, three soft robots are created: low-level edge tongue robots, Venus flytrap robots, and high-level nerve-center-controlled dragonfly robots. This power modulation strategy inspires designs of edge soft robots and high-level robots with a human-like effective fusion of conditioned and unconditioned reflexes.

Microcephaly Gene Mcph1 Deficiency Induces p19ARF-Dependent Cell Cycle Arrest and Senescence.

MCPH1 has been identified as the causal gene for primary microcephaly type 1, a neurodevelopmental disorder characterized by reduced brain size and delayed growth. As a multifunction protein, MCPH1 has been reported to repress the expression of TERT and interact with transcriptional regulator E2F1. However, it remains unclear whether MCPH1 regulates brain development through its transcriptional regulation function. This study showed that the knockout of Mcph1 in mice leads to delayed growth as early as the embryo stage E11.5. Transcriptome analysis (RNA-seq) revealed that the deletion of Mcph1 resulted in changes in the expression levels of a limited number of genes. Although the expression of some of E2F1 targets, such as Satb2 and Cdkn1c, was affected, the differentially expressed genes (DEGs) were not significantly enriched as E2F1 target genes. Further investigations showed that primary and immortalized Mcph1 knockout mouse embryonic fibroblasts (MEFs) exhibited cell cycle arrest and cellular senescence phenotype. Interestingly, the upregulation of p19ARF was detected in Mcph1 knockout MEFs, and silencing p19Arf restored the cell cycle and growth arrest to wild-type levels. Our findings suggested it is unlikely that MCPH1 regulates neurodevelopment through E2F1-mediated transcriptional regulation, and p19ARF-dependent cell cycle arrest and cellular senescence may contribute to the developmental abnormalities observed in primary microcephaly.

Competitive Inhibition of Okanin against Plasmodium falciparum Tyrosyl-tRNA Synthetase.

Malaria is a severe disease that presents a significant threat to human health. As resistance to current drugs continues to increase, there is an urgent need for new antimalarial medications. Aminoacyl-tRNA synthetases (aaRSs) represent promising targets for drug development. In this study, we identified Plasmodium falciparum tyrosyl-tRNA synthetase (PfTyrRS) as a potential target for antimalarial drug development through a comparative analysis of the amino acid sequences and three-dimensional structures of human and plasmodium TyrRS, with particular emphasis on differences in key amino acids at the aminoacylation site. A total of 2141 bioactive compounds were screened using a high-throughput thermal shift assay (TSA). Okanin, known as an inhibitor of LPS-induced TLR4 expression, exhibited potent inhibitory activity against PfTyrRS, while showing limited inhibition of human TyrRS. Furthermore, bio-layer interferometry (BLI) confirmed the high affinity of okanin for PfTyrRS. Molecular dynamics (MD) simulations highlighted the stable conformation of okanin within PfTyrRS and its sustained binding to the enzyme. A molecular docking analysis revealed that okanin binds to both the tyrosine and partial ATP binding sites of the enzyme, preventing substrate binding. In addition, the compound inhibited the production of Plasmodium falciparum in the blood stage and had little cytotoxicity. Thus, okanin is a promising lead compound for the treatment of malaria caused by P. falciparum.

The ultrasound-guided versus standard technique for peripheral intravenous catheter placement by nurses: A systematic review and meta-analysis.

Aim: To comprehensively evaluate the efficacy of Ultrasound-guided technique for peripheral intravenous catheter placement by nurses in their daily practice. Background: Peripheral intravenous catheter insertion is a common clinical procedure in healthcare settings. Ultrasound-guided peripheral intravenous placement has emerged in recent decades and was recognized as particularly useful in some specific patient groups. Methods: Studies that had compared the ultrasound-guided and traditional approaches were eligible for inclusion and further analysis. The primary outcome was the success rate on the first intravenous insertion attempt. The secondary outcomes included the time needed for successful insertion, and the average number of attempts to establish the IV access. We systematically assess all studies using Cochrane Collaboration's Risk of Bias tool and the Newcastle-Ottawa Scale. We calculated the odds ratio and standardized mean difference with 95 % confidence intervals for the outcomes. Data were analyzed and visualized on Review Manager 5.3.4 and Stata 16.0. Results: 23 studies were included (17 randomized controlled trials and six cohort studies) with a population of 2051 patients offered ultrasound-assisted technique and 2479 treated with the conventional approach for comparison. The former approach was associated with a higher success rate on the first attempt in comparison (OR = 2.95, 95 % CI: 1.86, 4.69). This technique also took less time and less acupuncture to patients' skin (SMD = -0.62, 95 % CI: 1.01, -0.23; SMD = -0.55, 95 % CI: 0.92, -0.18). In the sub-group analyses, children were more likely to benefit from ultrasound guided technique. Ultrasound guided technique demonstrated consistent and significant benefits in emergency clinical settings. Hospitals from different geographical locations exhibited similar trends in the three outcomes. Year of publication and study design revealed inconsistent and insignificant outcomes. Conclusions: Ultrasound-guided technique can be a safer, faster, and more effective alternative to the traditional approach for nurses to establish intravenous access across different clinical settings and age groups.

Systemic inflammatory regulators and preeclampsia: a two-sample bidirectional Mendelian randomization study.

Background: Systemic inflammatory regulators have been associated with preeclampsia (PE) during pregnancy; however, there is inconsistent evidence from animal models and observational results. Methods: Using summary data from genome-wide association studies (GWASs), we performed a bidirectional Mendelian randomization (MR) analysis of two samples of systemic inflammatory regulators (n = 8,186) and PE (n = 267,242) individuals of European ancestry. As our primary analysis, we used the random-effects inverse-variance weighted (IVW) approach. Sensitivity and pleiotropy analyses were conducted using the MR-Egger method, weighted median, MR Pleiotropy RESidual Sum and Outlier (MR-PRESSO), and Cochran's Q test. Results: The results indicate that there is a correlation between a higher circulating level of tumor necrosis factor alpha (TNF-α) and interleukin-9 (IL-9) and an increased risk of PE (odds ratio [OR] = 1.32, 95% confidence interval [CI] = 1.09-1.60, p = 0.004 and OR = 1.28, 95% CI: 1.02-1.62, p = 0.033, respectively). Conversely, lower levels of stem cell growth factor beta (SCGF-ß) (OR = 0.89, 95% CI: 0.80-0.99, p = 0.027) and interleukin-5 (IL-5) (OR = 0.80, 95% CI: 0.65-0.98, p = 0.030) are linked to an increased risk of PE. The macrophage migration inhibitory factor (MIF) is the downstream inflammatory regulator of PE, according to reverse magnetic resonance imaging studies. Conclusion: Our study suggests that SCGF-ß, IL-5, IL-9, and TNF-α causally affect the PE risk, while PE is causally associated with MIF. Further studies are needed to validate these biomarkers in managing PE.

Enhanced reduction of graphene oxide via laser-dispersion coupling: Towards large-scale, low-defect graphene for crease-free heat-dissipating membranes in advanced flexible electronics.

The advancement of flexible electronics demands improved components, necessitating heat dissipation membranes (HDMs) to exhibit high thermal conductivity while maintaining structural integrity and performance stability even after extensive deformation. Herein, we have devised a laser-modulated reduction technique for graphene oxide (GO), enabling the fabrication of high-quality, large-scale, low-defect graphene, which yields high-performance HDMs after orderly deposition. The work underscores the crucial role of the laser wavelength and dispersion liquid's coupling intensity in influencing the morphology and properties of graphene. Optimal coupling effect and energy conversion are realized when a laser of 1064 nm wavelength irradiates a triethylene glycol (TEG)/N,N-Dimethylformamide (DMF) dispersion. This unique synergy generates high transient energy, which facilitates the deprotonation process and ensures a swift, comprehensive GO reduction. In contrast to conventional water-based laser reduction methods, the accelerated reaction magnifies the size of the graphene sheets by mitigating the ablation effect. After membrane construction with an ordered structure, the corresponding membrane exhibits a high thermal conductivity of 1632 W m-1 K-1, requiring only ∼1/10 of the total preparation time required by other reported methods. Remarkably, the resulting HDM demonstrates superior resilience against creasing and folding, maintaining excellent smoothness and negligible reduction in thermal conductivity after violent rubbing. The combination of exceptional flexibility and thermal conductivity in HDMs paves the way for long-term practical use in the flexible electronics industry.

Isotemporal Substitution Modeling on Sedentary Behaviors and Physical Activity With Mortality Among People With Different Diabetes Statuses: A Prospective Cohort Study From the National Health and Nutrition Examination Survey Analysis 2007-2018.

BACKGROUND: To assess the associations of replacing sedentary behavior with different types of physical activity with mortality among the US adults of varying diabetes statuses. METHODS: This prospective cohort study included 21,637 participants (mean age, 48.5 y) from the National Health and Nutrition Examination Survey 2007-2018. Physical activity including leisure-time moderate-vigorous-intensity activity (MVPA), walking/bicycling, worktime MVPA, and sedentary behavior. We conducted an isotemporal substitution analysis using Cox regression to estimate the associations between replacements and mortality risks. RESULTS: We found significant protective associations between replacing 30 minutes per day sedentary behavior with 3 types of physical activity and all-cause, cardiovascular disease (CVD) mortality risk (except worktime MVPA for CVD mortality) among total participants, with hazard ratio (HR; 95% confidence interval [CI]) ranging from 0.86 (0.77-0.95) to 0.96 (0.94-0.98). Among participants with diagnosed diabetes, replacing sedentary behavior with leisure-time MVPA was associated with a lower all-cause mortality risk (HR 0.81, 95% CI, 0.70-0.94), which was also observed in other subgroups, with HRs (95% CI) ranging from 0.87 (0.80-0.94) to 0.89 (0.81-0.99). Among those with prediabetes/undiagnosed diabetes, replacing sedentary behavior with walking/bicycling was associated with lower CVD mortality risk, and replacement to work-time MVPA was associated with lower all-cause and CVD mortality risk, with HRs (95% CI) ranging from 0.72 (0.63-0.83) to 0.96 (0.92-0.99). CONCLUSIONS: Replacing sedentary behaviors with 30 minutes per day leisure-time MVPA was associated with lower all-cause mortality, regardless of diabetes statuses. Among people with prediabetes/undiagnosed diabetes, walking/bicycling was additionally associated with lower CVD mortality, and worktime MVPA was associated with lower all-cause and CVD mortality.

Vitamin D3 exacerbates steatosis while calcipotriol inhibits inflammation in non-alcoholic fatty liver disease in Sod1 knockout mice: a comparative study of two forms of vitamin D.

The role of vitamin D (VD) in non-alcoholic fatty liver disease (NAFLD) remains controversial, possibly due to the differential effects of various forms of VD. In our study, Sod1 gene knockout (SKO) mice were utilized as lean NAFLD models, which were administered 15 000 IU VD3 per kg diet, or intraperitoneally injected with the active VD analog calcipotriol for 12 weeks. We found that VD3 exacerbated hepatic steatosis in SKO mice, with an increase in the levels of Cd36, Fatp2, Dgat2, and CEBPA. However, calcipotriol exerted no significant effect on hepatic steatosis. Calcipotriol inhibited the expression of Il-1a, Il-1b, Il-6, Adgre1, and TNF, with a reduction of NFκB phosphorylation in SKO mice. No effect was observed by either VD3 or calcipotriol on hepatocyte injury and hepatic fibrosis. Co-immunofluorescence stains of CD68, a liver macrophage marker, and VDR showed that calcipotriol reduced CD68 positive cells, and increased the colocalization of VDR with CD68. However, VD3 elevated hepatocyte VDR expression, with no substantial effect on the colocalization of VDR with CD68. Finally, we found that VD3 increased the levels of serum 25(OH)D3 and 24,25(OH)2D3, whereas calcipotriol decreased both. Both VD3 and calcipotriol did not disturb serum calcium and phosphate levels. In summary, our study found that VD3 accentuated hepatic steatosis, while calcipotriol diminished inflammation levels in SKO mice, and the difference might stem from their distinct cellular selectivity in activating VDR. This study provides a reference for the application of VD in the treatment of lean NAFLD.

Recent advances in membrane technologies applied in oil-water separation.

Effective treatment of oily wastewater, which is toxic and harmful and causes serious environmental pollution and health risks, has become an important research field. Membrane separation technology has emerged as a key area of investigation in oil-water separation research due to its high separation efficiency, low costs, and user-friendly operation. This review aims to report on the advances in the research of various types of separation membranes around emulsion permeance, separation efficiency, antifouling efficiency, and stimulus responsiveness. Meanwhile, the challenges encountered in oil-water separation membranes are examined, and potential research avenues are identified.

In Situ Polymer-Solution-Processed Graphene-PDMS Nanocomposites for Application in Intracranial Pressure Sensors.

Polydimethylsiloxane (PDMS) has emerged as a promising candidate for the dielectric layer in implantable sensors due to its exceptional biocompatibility, stability, and flexibility. This study introduces an innovative approach to produce graphene-reinforced PDMS (Gr-PDMS), where graphite powders are exfoliated into mono- and few-layer graphene sheets within the polymer solution, concurrently forming cross-linkages with PDMS. This method yields a uniformly distributed graphene within the polymer matrix with improved interfaces between graphene and PDMS, significantly reducing the percolation threshold of graphene dispersed in PDMS from 10% to 5%. As-synthesized Gr-PDMS exhibits improved mechanical and electrical properties, tested for potential use in capacitive pressure sensors. The results demonstrate an impressive pressure sensitivity up to 0.0273 kpa-1, 45 times higher than that of pristine PDMS and 2.5 times higher than the reported literature value. The Gr-PDMS showcases excellent pressure sensing ability and stability, fulfilling the requirements for implantable intracranial pressure (ICP) sensors.

Integration of photothermal water evaporation with photocatalytic microplastics upcycling via nanofluidic thermal management.

Photothermal heating and photocatalytic treatment are two solar-driven water processing approaches by harnessing NIR and UV-vis light, respectively, which can fully utilize solar energy if integrated. However, it remains a challenge to achieve high performance in both approaches when integrated in a material due to uncontrollable heat diffusion. Here, we report a demonstration of heat confinement on photothermal sites and fluid cooling on photocatalysis sites at the nanoscale, within a well-designed heat and fluid confinement nanofiber reactor. Photothermal and photocatalytic nanostructures were alternatively aligned in electrospun nanofibers for on-demand nanofluidic thermal management as well as easy folding into 3D structures with enhanced light utilization and mass transfer. Such a design showed simultaneously high photothermal evaporation rate (2.59 kg m-2 h-1, exceeding the limit rate) and efficient photocatalytic upcycling of microplastics pollutant into valued products. Enabled by controlled photothermal heating, the valued main product (i.e., methyl acetate) can be evaporated out with 100% selectivity by in situ separation.

Highly Stable Photo-Assisted Zinc-Ion Batteries via Regulated Photo-Induced Proton Transfer.

Photo-assisted ion batteries utilize light to boost capacity but face cycling instability due to complex charge/ion transfer under illumination. This study identified photo-induced proton transfer (photo-induced PT) as a significant process in photo-(dis)charging of widely-used V2O5-based zinc-ion batteries, contributing to enhanced capacity under illumination but jeopardizing photo-stability. Photo-induced PT occurs at 100 ps after photo-excitation, inducing rapid proton extraction into V2O5 photoelectrode. This process creates a proton-deficient microenvironment on surface, leading to repetitive cathode dissolution and anode corrosion in each cycle. Enabling the intercalated protons from photo-induced PT to be reversibly employed in charge-discharge processes via the anode-alloying strategy achieves high photo-stability for the battery. Consequently, a ~54 % capacity enhancement was achieved in a V2O5-based zinc-ion battery under illumination, with ~90 % capacity retention after 4000 cycles. This extends the photo-stability record by 10 times. This study offers promising advancements in energy storage by addressing instability issues in photo-assisted ion batteries.

Image-Guided Photothermal and Immune Therapy of Tumors via Melanin-Producing Genetically Engineered Bacteria.

Photothermal therapy (PTT) is a new treatment modality for tumors. However, the efficient delivery of photothermal agents into tumors remains difficult, especially in hypoxic tumor regions. In this study, an approach to deliver melanin, a natural photothermal agent, into tumors using genetically engineered bacteria for image-guided photothermal and immune therapy is developed. An Escherichia coli MG1655 is transformed with a recombinant plasmid harboring a tyrosinase gene to produce melanin nanoparticles. Melanin-producing genetically engineered bacteria (MG1655-M) are systemically administered to 4T1 tumor-bearing mice. The tumor-targeting properties of MG1655-M in the hypoxic environment integrate the properties of hypoxia targeting, photoacoustic imaging, and photothermal therapeutic agents in an "all-in-one" manner. This eliminates the need for post-modification to achieve image-guided hypoxia-targeted cancer photothermal therapy. Tumor growth is significantly suppressed by irradiating the tumor with an 808 nm laser. Furthermore, strong antitumor immunity is triggered by PTT, thereby producing long-term immune memory effects that effectively inhibit tumor metastasis and recurrence. This work proposes a new photothermal and immune therapy guided by an "all-in-one" melanin-producing genetically engineered bacteria, which can offer broad potential applications in cancer treatment.

Top-down design of high-performance V-based MBene anode for Li/Na-ion batteries.

Two-dimensional (2D) MBenes have enormous potential in energy applications. Vanadium metal, with its versatile and tunable electronic states, can further enhance the electrochemical performance of MBenes. However, most MBenes are composed of a few atomic layers as the metal boron (MB) block, e.g., M2B2, which might lead to instability and poor mechanical response. Herein, we designed and predicted 2D V4B6 associated with different terminations (T = Cl, O, S) using a top-down method and global search for parental V4AB6. Among the A element candidates, the P-glued MAB phase exhibited high stability and easy synthesizability. Moreover, 2D V4B6 was feasibly formed and easily exfoliated owing to its weak V-P bonding. Most of the surface functionalization could improve both the mechanical and electrochemical properties of the V4B6 monolayer. In particular, 2D V4B6S2 exhibited a high potential as an anode material for lithium-ion batteries (LIBs) with high theoretical capacity (297 mA h g-1), low diffusion barrier (0.166 eV), and low open circuit voltage (0.136 V), outperforming a majority of MXenes and transition metal sulfide layers. This work offers a new strategy for designing desirable 2D layers from parental materials, and tuning their properties via composition and surface functionalization, which could shed light on the development of other 2D metal-ion anodes.

Relief of tumor hypoxia using a nanoenzyme amplifies NIR-II photoacoustic-guided photothermal therapy.

Hypoxia is a critical tumor microenvironment (TME) component. It significantly impacts tumor growth and metastasis and is known to be a major obstacle for cancer therapy. Integrating hypoxia modulation with imaging-based monitoring represents a promising strategy that holds the potential for enhancing tumor theranostics. Herein, a kind of nanoenzyme Prussian blue (PB) is synthesized as a metal-organic framework (MOF) to load the second near-infrared (NIR-II) small molecule dye IR1061, which could catalyze hydrogen peroxide to produce oxygen and provide a photothermal conversion element for photoacoustic imaging (PAI) and photothermal therapy (PTT). To enhance stability and biocompatibility, silica was used as a coating for an integrated nanoplatform (SPI). SPI was found to relieve the hypoxic nature of the TME effectively, thus suppressing tumor cell migration and downregulating the expression of heat shock protein 70 (HSP70), both of which led to an amplified NIR-II PTT effect in vitro and in vivo, guided by the NIR-II PAI. Furthermore, label-free multi-spectral PAI permitted the real-time evaluation of SPI as a putative tumor treatment. A clinical histological analysis confirmed the amplified treatment effect. Hence, SPI combined with PAI could offer a new approach for tumor diagnosing, treating, and monitoring.

Hierarchical structure promoted lithiation/delithiation behavior of a double-carbon microsphere supported nano-Co3O4 anode.

Due to limited mass loading, high-capacity electrode materials such as transition metal oxides (TMOs) are essential for microscale Li-ion batteries (LIBs) integrated in nano-/micro-electromechanical systems (N/MEMS). Unfortunately, their electrochemical performances are largely plagued by severe mechanical degradation and slow electron transport. Therefore, it is crucial to develop strategies that can improve the structural stability and electronic conductivity of TMO electrodes. In this work, double-carbon (carbon nanotubes and ketjen black) microsphere (DCMS) supported Co3O4 electrodes are fabricated simply through a spray drying and solvothermal method, which are designed to have a mesoporous three-dimensional (3D) hierarchical heterostructure containing well-dispersed Co3O4 nanoparticles within the DCMS framework. An in situ transmission electron microscopy (TEM) study reveals that the DCMS framework can not only provide facile strain accommodation, but also good electronic conductivity, leading to a much improved Li-storage performance compared to other Co3O4-based anodes. The hierarchical electrode exhibits maximum charge capacities of 1205.2 and 678.1 mA h g-1 at current densities of 0.1 and 2 A g-1, respectively, as well as a capacity retention of 92.2% at 0.3 A g-1 after 100 cycles. This study provides a low-cost, simple and general method for developing advanced high-capacity electrodes.

Integrated metabolomic and transcriptomic analyses reveal the molecular mechanism of amino acid transport between source and sink during tea shoot development.

KEY MESSAGE: The weighted gene co-expression network analysis and antisense oligonucleotide-mediated transient gene silencing revealed that CsAAP6 plays an important role in amino acid transport during tea shoot development. Nitrogen transport from source to sink is crucial for tea shoot growth and quality formation. Amino acid represents the major transport form of reduced nitrogen in the phloem between source and sink, but the molecular mechanism of amino acid transport from source leaves to new shoots is not yet clear. Therefore, the composition of metabolites in phloem exudates collected by the EDTA-facilitated method was analyzed through widely targeted metabolomics. A total of 326 metabolites were identified in the phloem exudates with the richest variety of amino acids and their derivatives (93), accounting for approximately 39.13% of the total metabolites. Moreover, through targeted metabolomics, it was found that the content of glutamine, glutamic acid, and theanine was the most abundant, and gradually increased with the development of new shoots. Meanwhile, transcriptome analysis suggested that the expression of amino acid transport genes changed significantly. The WGCNA analysis identified that the expression levels of CsAVT1, CsLHTL8, and CsAAP6 genes located in the MEterquoise module were positively correlated with the content of amino acids such as glutamine, glutamic acid, and theanine in phloem exudates. Reducing the CsAAP6 in mature leaves resulted in a significant decrease in the content of glutamic acid, aspartic acid, alanine, leucine, asparagine, glutamine, and arginine in the phloem exudates, indicating that CsAAP6 played an important role in the source to sink transport of amino acids in the phloem. The research results will provide the theoretical basis and genetic resources for the improvement of nitrogen use efficiency and tea quality.

Microelectromechanical system for in situ quantitative testing of tension-compression asymmetry in nanostructures.

Tension-compression asymmetry is a topic of current interest in nanostructures, especially in strain engineering. Herein, we report a novel on-chip microelectromechanical system (MEMS) that can realize in situ quantitative mechanical testing of nanostructures under tension-compression functions. The mechanical properties of three kinds of nanostructures fabricated by focused ion beam (FIB) techniques were systematically investigated with the presented on-chip testing system. The results declare that both Pt nanopillars and C nanowires exhibit plastic deformation behavior under tension testing, with average Young's moduli of 70.06 GPa and 58.32 GPa, respectively. However, the mechanical deformation mechanisms of the two nanostructures changed in compression tests. The Pt nanopillar exhibited in-plane buckling behavior, while the C nanowire displayed 3D twisting behavior with a maximum strain of 25.47%, which is far greater than the tensile strain. Moreover, asymmetric behavior was also observed in the C nanospring during five loading-unloading tension-compression deformation tests. This work provides a novel insight into the asymmetric mechanical properties of nanostructures, with potential applications in nanotechnology research.