Lignin and functional polymer-based materials: Synthesis, characterization and application for Cr (VI) and As (V) removal from aqueous media.

In this study, lignin derived from corncobs was chemically modified by substituting the hydroxyl groups present in its structure with methacrylate groups through a catalytic reaction using methacrylic anhydride, resulting in methacrylated lignin (ML). These MLs were incorporated in polymerization reaction of the monomer 2-[(acryloyloxy)ethyl trimethylammonium] chloride (Cl-AETA) and Cl-AETA, Cl-AETA/ML polymers were obtained, characterized (spectroscopic, thermal and microscopic analysis), and evaluated for removing Cr (VI) and As (V) from aqueous media in function of pH, contact time, initial metal concentrations and adsorbent amount. The Cl-AETA/ML polymers followed the Langmuir adsorption model for the evaluated metal anions and were able to remove up to 91 % of Cr (VI) with a qmax (maximum adsorption capacity) of 201 mg/g, while for As (V), up to 60 % could be removed with a qmax of 58 mg/g. The results demonstrate that simple modifications in lignin enhance its functionalization and properties, making it suitable for removing contaminants from aqueous media, showing promising results for potential future applications.

Carboxymethyl chitosan composited poly(ethylene oxide) electrolyte with high ion conductivity and interfacial stability for lithium metal batteries.

Low ionic conductivity and poor interface stability of poly(ethylene oxide) (PEO) restrict the practical application as polymeric electrolyte films to prepare solid-state lithium (Li) metal batteries. In this work, biomass-based carboxymethyl chitosan (CMCS) is designed and developed as organic fillers into PEO matrix to form composite electrolytes (PEO@CMCS). Carboxymethyl groups of CMCS fillers can promote the decomposition of Lithium bis(trifluoromethane sulfonimide) (LiTFSI) to generate more lithium fluoride (LiF) at CMCS/PEO interface, which not only forms ionic conductive network to promote the rapid transfer of Li+ but also effectively enhances the interface stability between polymeric electrolyte and Li metal. The enrichment of carboxyl, hydroxyl, and amidogen functional groups within CMCS fillers can form hydrogen bonds with ethylene oxide (EO) chains to improve the tensile properties of PEO-based electrolyte. In addition, the high hardness of CMCS additives can also strengthen mechanical properties of PEO-based electrolyte to resist penetration of Li dendrites. LiLi symmetric batteries can achieve stable cycle for 2500 h and lithium iron phosphate full batteries can maintain 135.5 mAh g-1 after 400 cycles. This work provides a strategy for the enhancement of ion conductivity and interface stability of PEO-based electrolyte, as well as realizes the resource utilization of biomass-based CMCS.

Multi-site sulfonation of lignin for the synthesis of a high-performance dye dispersant.

Sulfonated lignin-based dye dispersants have intensively attracted attention due to their low cost, renewability and abundant sources. However, their utilization is limited by the low content of sulfonic groups and high content of hydroxyl groups in their complex lignin structure, which results in various problems such as high reducing rate of dye, severe staining of the fibers and uneven dyeing. Here, the multi-site sulfonated lignin-based dispersants were prepared with high sulfonic group content (2.20 mmol/g) and low hydroxyl content (2.43 mmol/g). When using it as the dispersant, the dye uptake rate was improved from 69.23 % to 98.55 %, the reducing rate was decreased from 20.82 % to 2.03 %, the K/S value was reduced from 0.69 to 0.02, and the particle sizes in dye system before and after high temperature treatment were stabilized below 0.5 µm. Besides, the dispersion effect was significantly improved because no obvious separation between dye and water was observed even if without the assistance of grinding process. In short, the multi-site sulfonation method proposed in this work could remarkably improve the performances of the lignin-based dye dispersants, which would facilitate the development of the dye dispersion and the high value utilization of lignin.

Facile construction of lignin-based network composite hydrogel for efficient adsorption of methylene blue from wastewater.

Adsorption method is an effective approach to treat wastewater containing methylene blue. Herein, a cost-effective and eco-friendly lignin-based network composite hydrogel adsorbent (PAA@SML) was constructed by using polyacrylic acid (PAA) to crosslink with sulfomethylated lignin (SML) via free radical polymerization for adsorption of methylene blue (MB) from wastewater. The constructed PAA@SML-0.2 exhibited remarkable adsorption performance towards removal of MB, with a maximum theoretical adsorption capacity of 777.1 mg·g-1. The improved efficiency can be attributed to the well-established network structure and abundant hydrophilic functional groups present in the adsorbent, promoting the interaction between methylene blue (MB) molecules and the adsorption sites of the adsorbent. The adsorption process of the adsorbent for MB followed the pseudo-second-order kinetic and the Langmuir isotherm models, which illustrated the adsorption process attributed to monolayer chemisorption. Mechanism investigation confirmed that the adsorption of MB by PAA@SML-0.2 primarily relied on hydrogen bonding and electrostatic interactions. Moreover, the recyclability test demonstrated excellent regeneration usability and stability of PAA@SML-0.2, and the adsorption capacity maintained above 74.0 % after five cycles. This constructed lignin-based network composite hydrogel is considered to have great potential in the treatment of organic dye in wastewater.

Unraveling the Lignin Structural Variation in Different Bamboo Species.

The structure of cellulolytic enzyme lignin (CEL) prepared from three bamboo species (Neosinocalamus affinis, Bambusa lapidea, and Dendrocalamus brandisii) has been characterized by different analytical methods. The chemical composition analysis revealed a higher lignin content, up to 32.6% of B. lapidea as compared to that of N. affinis (20.7%) and D. brandisii (23.8%). The results indicated that bamboo lignin was a p-hydroxyphenyl-guaiacyl-syringyl (H-G-S) lignin associated with p-coumarates and ferulates. Advanced NMR analyses displayed that the isolated CELs were extensively acylated at the γ-carbon of the lignin side chain (with either acetate and/or p-coumarate groups). Moreover, a predominance of S over G lignin moieties was found in CELs of N. affinis and B. lapidea, with the lowest S/G ratio observed in D. brandisii lignin. Catalytic hydrogenolysis of lignin demonstrated that 4-propyl-substituted syringol/guaiacol and propanol guaiacol/syringol derived from ß-O-4' moieties, and methyl coumarate/ferulate derived from hydroxycinnamic units were identified as the six major monomeric products. We anticipate that the insights of this work could shed light on the sufficient understanding of lignin, which could open a new avenue to facilitate the efficient utilization of bamboo.

Renewable galactomannan-based biogums with structure regulation to protect zinc metal anodes via blocking and confinement effect.

Galactomannan-based biogums were derived from fenugreek, guar, tara, and carob and consisted of mannose and galactose with different ratios, as well as the implementation of high-value utilization was very significant for sustainable development. In this work, renewable and low-cost galactomannan-based biogums were designed and developed as functional coatings protected on the Zn metal anodes. The molecule structure of galactomannan-based biogums were explored on the effect of anticorrosion ability and uniform deposition behavior through the introduction of fenugreek gum, guar gum, tara gum, and carob gum with different ratios of mannose to galactose as 1.2:1, 2:1, 3:1, and 4:1. The existence of biogum protective layers can reduce the contact area between Zn anodes and aqueous electrolyte to enhance the anticorrosion ability of Zn anodes. Rich oxygen-containing groups in galactomannan-based biogums can coordinate with Zn2+ and Zn atoms to form ion conductivity gel layer and adsorb closely on the surface of Zn metal, which can induce uniform deposition of Zn2+ to avoid dendrite growth. Zn electrodes protected by biogums can cycle impressively for 1980 h with 2 mA cm-2 and 2 mAh cm-2. This work can provide a novel strategy to enhance Zn metal anodes' electrochemical performance, as well as implement the high-value application of biomass-based biogums as functional coatings.

Surface Control Behavior toward Crystal Regulation and Anticorrosion Capacity for Zinc Metal Anodes.

The commercial application of high-safety aqueous zinc (Zn) secondary batteries is hindered by the poor cycling life of Zn metal anodes. Here we propose a dendrite growth and hydrogen evolution corrosion reaction mechanism from the binding energy of the deposited crystal plane on the Zn surface and the adsorption energy of H2O molecules on different crystal planes as well as the binding energy of H2O molecules with Zn2+ ions. The biomass-based alkyl polyglucoside (APG) surfactant is adopted as an electrolyte additive of 0.15% to regulate the preferential growth of a parallel Zn(002) plane and enhance the anticorrosion ability of Zn metal anodes. The robust binding and adsorption energies of APG with Zn2+ ions in the aqueous electrolyte and the Zn(002) plane on Zn surface generate a synergistic effect to increase the concentration of Zn2+ ions on the APG-adsorbed Zn(002) plane, endowing the continuous growth of the preferential parallel Zn(002) plane and the excellent anticorrosion capacity. Accordingly, the long-term cycle stability of 4000 h can be achieved for Zn anodes with APG additives, which is better than that with pure ZnSO4 electrolyte. With the addition of APG in the anolyte electrolyte, Zn-I2 full cells display excellent cycling performance (70 mAh g-1 after 20000 cycles) as compared with that without APG additives.

Lignin-based composites with enhanced mechanical properties by acetone fractionation and epoxidation modification.

Epoxy resin is widely used in various fields of the national economy due to its excellent chemical and mechanical properties. Lignin is mainly derived from lignocelluloses as one of the most abundant renewable bioresources. Due to the diversity of lignin sources and the complexity as well as heterogeneity of its structure, the value of lignin has not been fully realized. Herein, we report the utilization of industrial alkali lignin for the preparation of low-carbon and environmentally friendly bio-based epoxy thermosetting materials. Specifically, epoxidized lignin with substituted petroleum-based chemical bisphenol A diglycidyl ether (BADGE) in various proportions was cross-linked to fabricate thermosetting epoxies. The cured thermosetting resin revealed enhanced tensile strength (4.6 MPa) and elongation (315.5%) in comparison with the common BADGE polymers. Overall, this work provides a practicable approach for lignin valorization toward tailored sustainable bioplastics in the context of a circular bioeconomy.

Designed synthesis of multifunctional lignin-based adsorbent for efficient heavy metal ions removal and electromagnetic wave absorption.

Multifunctional lignin-based adsorbents, which have shown great application prospect, have attracted widespread attention. Herein, a series of multifunctional lignin-based magnetic recyclable adsorbents were prepared from carboxymethylated lignin (CL), which was rich in carboxyl group (-COOH). After optimizing the mass ratio of CL to Fe3O4, the prepared CL/Fe3O4 (3:1) adsorbent showed efficient adsorption capacities for heavy metal ions. The kinetic and isotherm nonlinear fitting studies revealed that the adsorption process followed the second-order kinetic and Langmuir models, and the maximum adsorption capacities (Qmax) of CL/Fe3O4 (3:1) magnetic recyclable adsorbent for Pb2+, Cu2+ and Ni2+ ions reached 189.85, 124.43 and 106.97 mg/g, respectively. Meanwhile, after 6 cycles, the adsorption capacities of CL/Fe3O4 (3:1) for Pb2+, Cu2+ and Ni2+ ions could keep at 87.4 %, 83.4 % and 82.3 %, respectively. In addition, CL/Fe3O4 (3:1) also exhibited excellent electromagnetic wave absorption (EMWA) performance with a reflection loss (RL) of -28.65 dB at 6.96 GHz under the thickness of 4.5 mm, and its effective absorption bandwidth (EAB) achieved 2.24 GHz (6.08-8.32 GHz). In short, the prepared multifunctional CL/Fe3O4 (3:1) magnetic recyclable adsorbent with outstanding adsorption capacity for heavy metal ions and superior EMWA capability opens a new avenue for the diversified utilization of lignin and lignin-based adsorbent.

Valorization of lignin through reductive catalytic fractionation of fermented corn stover residues.

The fermented corn stover residues are abundant renewable lignin-rich bioresources that show great potential to produce aromatic phenols. However, selective catalytic hydrogenolysis of this residual material still remains challenge to obtain high yields. Herein, a novel strategy to produce monophenolic compounds from the fermented stover over a commercial Pd/C catalyst was proposed. Taking the reaction temperature as the key variable, the highest monomer yield was 28.5 wt% at 220 °C in compaction with that of the pristine corn stover (22.8 wt%). The enhanced monophenol yield was due to the higher contents of lignin and less recalcitrance in the fermented stover. Moreover, the van Krevelen diagram revealed a slight selective CO bond scission of lignin macromolecular during fermentation as well as the dehydration and deoxygenation in hydrogenolysis reaction. Overall, this work opens a new avenue for the valorization of lignin through reductive catalytic fractionation of agricultural wastes.

Cellulose-based bio-adsorbent from TEMPO-oxidized natural loofah for effective removal of Pb(II) and methylene blue.

Excessive discharge of inorganic and organic contaminants in water poses a serious threat to the ecosystems. However, most synthetic adsorbents lack cost-effectiveness in terms of preparation. Interestingly, loofah sponge (LS) was a natural absorbent that could effectively remove pollutions in wastewater, but its adsorption capacity is barely satisfactory. Herein, we present a novel strategy of TEMPO-oxidized loofah sponge (TOLS) to boost the adsorption performance of LS. The batch experiments demonstrated that the maximum removal capacity of TOLS for Pb(II) and methylene blue (MB) was 96.6 mg/g and 10.0 mg/g, respectively, which were 3.5 and 1.3 times that of pristine LS. Notably, the continuous-flow reaction testing of the mixed solution revealed that the elimination rate of Pb(II) and MB was still better than 90 % even after 16 h. Such excellent performance was benefit from the enhanced specific surface area and surface carboxyl content of TOLS. This work offers new insights into the rational development of multifunctional and inexpensive cellulose-based bio-adsorbents for wastewater remediation.

Fabricating lignin-based carbon nanofibers as versatile supercapacitors from food wastes.

Recently, the high-value utilization of food wastes has attracted great interest in sustainable development. Focusing on the major application of electrochemical energy storage (ECES), light-weight lignin-based carbon nanofibers (LCNFs) were controllably fabricated as supercapacitors from melon seed shells (MSS) and peanut shells (PS) through electrospinning and carbonizing processes. As a result, the optimal specific capacitance of 533.7 F/g in three-electrode system, energy density of 69.7 Wh/kg and power density of 780 W/Kg in two-electrode system were achieved. Surprisingly, the LCNFs also presented a satisfied electromagnetic absorption property: The minimum reflection loss (RL) value reached -37.2 dB at an absorbing frequency of 7.98 GHz with an effective frequency (RL < 10 dB) of 2.24 GHz (6.88 to 9.12 GHz) at a thickness of 3.0 mm. These features make the multifunctional LCNFs highly attractive for light-weight supercapacitor electrodes and electromagnetic wave absorbers applications.

Severity factor kinetic model as a strategic parameter of hydrothermal processing (steam explosion and liquid hot water) for biomass fractionation under biorefinery concept.

Hydrothermal processes are an attractive clean technology and cost-effective engineering platform for biorefineries based in the conversion of biomass to biofuels and high-value bioproducts under the basis of sustainability and circular bioeconomy. The deep and detailed knowledge of the structural changes by the severity of biomasses hydrothermal fractionation is scientifically and technological needed in order to improve processes effectiveness, reactors designs, and industrial application of the multi-scale target compounds obtained by steam explosion and liquid hot water systems. The concept of the severity factor [log10 (Ro)] established>30 years ago, continues to be a useful index that can provide a simple descriptor of the relationship between the operational conditions for biomass fractionation in second generation of biorefineries. This review develops a deep explanation of the hydrothermal severity factor based in lignocellulosic biomass fractionation with emphasis in research advances, pretreatment operations and the applications of severity factor kinetic model.

Effective fractionation strategy of sugarcane bagasse lignin to fabricate quality lignin-based carbon nanofibers supercapacitors.

Lignin is recommended to a tempting alternative precursor of petroleum for fabricating carbon nanofibers (CNFs) due to its high carbon content, low-cost and renewable resources. However, the property of lignin-based carbon nanofibers (LCNFs) is inferior owing to the heterogeneity and 3D-network structure of lignin, which hinders its application in supercapacitors. The latest developments in fractionation technology have shown great potential for overcoming the aforementioned shortcomings. However, most of fractionation methods mainly rely on expensive chemicals and complex reaction process, such as enzymes, multiple solvents, membranes, and dialysis tubes. Herein, we proposed a controllable and effective strategy to fractionate lignin by only changing the ratio of ethanol/water (V/V) as mixture solvent. This gradient extraction method effectively removed the part of lignin with small molecular and branching structure, thus selectively getting the fractionated lignin with high molecular weight, narrow polydispersity index, and good linear structure. Fortunately, when the ratio of ethanol/water was 6:4, the corresponding LCNFs (LCNFs-L60) was obtained with large specific surface area, independent filamentous morphology networks and excellent electrochemical property. Its specific capacitance was up to 405.8 F/g. This way features controllable and sustainable for preparing high-quality LCNFs supercapacitors.

Tuning structure of spent coffee ground lignin by temperature fractionation to improve lignin-based carbon nanofibers mechanical performance.

Fabricating lignin-based carbon nanofibers (LCNFs) with the lignin in spent coffee grounds (SCG) as raw material which are disposed as waste amounting to millions tons annual is benefit to promote economy and environmental protection. However, due to the heterogeneity and complex three-dimensional structure, the mechanic property is very poor. In this study, we propose a fractionating pretreatment method to overcome the above problems by regulating the structure of SCG lignin in which high-performance LCNFs were fabricated. On one hand, the linear structure of SCG lignin was optimized to fit the raw material of LCNFs by tuning the content of ß-O-4 and C5-substituted condensed phenolic compounds. On the other hand, the carboxyl as the hydrophilic groups was removed so as to promote the mixing of lignin and polyacrylonitrile (PAN, blending agent) in organic solvents. Additionally, the heterogeneity was reduced by screening large molecular weight SCG lignin with low polydispersity index (PDI). Fortunately, with 1:1 mass ratio of the above fractionated lignin and PAN as substrate, the LCNFs could reach to comparable mechanic properties with those of pure PAN CNFs. This work can provide a new way to not only promote the utilization of SCG lignin but also accelerate the development of LCNFs.

Preface to Special Issue of ChemSusChem on Lignin Valorization: From Theory to Practice.

In this Editorial, Guest Editors Run-Cang Sun, Joseph S. M. Samec, and Arthur J. Ragauskas introduce the Special Issue of ChemSusChem on Lignin Valorization: From Theory to Practice. The significance of and enormous challenges for the utilization of lignin are reviewed, and the contents of the Special Issue with highly interesting contributions from scientists around the world are outlined.

Acidic deep eutectic solvent assisted isolation of lignin containing nanocellulose from thermomechanical pulp.

Nanocellulose is a promising material but its isolation generally requires unrecyclable hazardous chemicals and high energy consumption and its overall yield is low due to the use of high purity cellulose as precursor. In order to overcome these shortcomings, in this study, thermomechanical pulp (TMP) was investigated as a precursor for isolating lignin containing nanocellulose (LNC) using an environmentally friendly acidic deep eutectic solvent (DES) pre-treatment. Flat "ribbon" like LNCs (around 7.1 nm wide, 3.7 nm thick) with uniformly distributed lignin nanoparticles of 20-50 nm in diameter were successfully obtained at 57 % yield under optimum pre-treatment conditions (90 °C, 6 h, 1:1 oxalic acid dihydrate to choline chloride ratio). The LNCs exhibit cellulose Iß structure, high lignin content (32.6 %), and high thermal stability (Tmax of 358 °C). In general, green acidic DES pre-treatment has shown high efficiency in converting high lignin content biomass into value-added LNC, which benefits both lignocellulose utilization and environmental protection.

Lignin Source and Structural Characterization.

Invited for this month's cover is the group of Run-Cang Sun at Dalian Polytechnic University. The image shows that lignin has the potential to produce energy, chemicals, and materials. The Essay itself is available at 10.1002/cssc.202001324.

Lignin Source and Structural Characterization.

Lignin is a primary component of lignocellulosic biomass and an underutilized feedstock in the growing pulping and biofuel industries. Currently, over 50 million tons of industrial lignin are produced annually from pulping and bioethanol processes in the world. Around 95 % of industrial lignin is burned as fuel in heat and power plants due to its complicated, destructive, and condensed structures hindering direct industrial utilization, while the remaining 5 % of lignin is used for potential applications, such as additives, binders, dispersants, and surfactants, through modification. Meanwhile, different biorefinery processes also produce a considerable amount of lignin with various structural features and properties. The development of technologies for its structural characterization is currently desirable for lignin valorization, which will improve the techno-economics of applications of lignins in industries.

Unlocking Structure-Reactivity Relationships for Catalytic Hydrogenolysis of Lignin into Phenolic Monomers.

Lignin depolymerization into aromatic monomers with high yields and selectivity is essential for the economic feasibility of biorefinery. However, the relationship between lignin structure and its reactivity for upgradeability is still poorly understood, in large part owing to the difficulty in quantitative characterization of lignin structural properties. To overcome these shortcomings, advanced NMR technologies [2D HSQC (heteronuclear single quantum coherence) and 31 P] were used to accurately quantify lignin functionalities. Diverse lignin samples prepared from Eucalyptus grandis with varying ß-O-4 linkages were subjected to Pd/C-catalyzed hydrogenolysis for efficient C-O bond cleavage to achieve theoretical monomer yields. Strong correlations were observed between the yield of monomeric aromatic compounds and the structural features of lignin, including the contents of ß-O-4 linkages and phenolic hydroxyl groups. Notably, a combined yield of up to 44.1 wt % was obtained from ß-aryl ether rich in native lignin, whereas much lower yields were obtained from technical lignins low in ß-aryl ether content. This work quantitatively demonstrates that the lignin reactivity for acquiring aromatic monomer yields varies depending on the lignin fractionation processes.