Multiple Functional Bonds Integrated Interphases for Long Cycle Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) have garnered significant interest as one of the most promising energy suppliers for power grid energy storage. However, the poor electrode/electrolyte interfacial stability leads to continual electrolyte decomposition and transition metal dissolution, resulting in rapid performance degradation of SIBs. In this work, we propose a strategy integrating multiple functional bonds to regulate electrode/electrolyte interphase by triple-coupling of succinonitrile (SN), sodium hexafluorophosphate (NaPF6) and fluorinated ethylene carbonate (FEC). Theoretical calculation and experiment results show that the solvation structure of Na+ and ClO4- is effectively reconfigured by the solvated FEC, SN and PF6- in PC-based carbonate electrolyte. The newly developed electrolyte demonstrates increased Na+-FEC coordination, weakened interaction of Na+-PC and participation of SN and PF6- anions in solvation, resulting in the formation of a conformal interfacial layer comprising of sodium oxynitrides (NaNxOy), sodium fluoride (NaF) and phosphorus oxide compounds (NaPxOy). Consequently, a 3 Ah pouch full cell of hard carbon//NaNi1/3Fe1/3Mn1/3O2 exhibits an excellent capacity retention of 90.4% after 1000 cycles. Detailed postmortem analysis of interface chemistry is further illustrated by multiple characterization methods. This study provides a new avenue for developing electrolyte formulations with multiple functional bonds integrated interphases to significantly improve the long-term cycling stability of SIBs.

Low-Temperature Molten Salt Electrochemical CO2 Upcycling for Advanced Energy Materials.

One strategy for addressing the climate crisis caused by CO2 emissions is to efficiently convert CO2 to advanced materials suited for green and clean energy technology applications. Porous carbon is widely used as an advanced energy storage material because of its enhanced energy storage capabilities as an anode. Herein, we report electrochemical CO2 upcycling to solid carbon with a controlled microstructure and porosity in a ternary molten carbonate melt at 450 °C. Controlling the electrochemical parameters (voltage, temperature, cathode material) enabled the conversion of CO2 to porous carbon with a tunable morphology and porosity for the first time at such a low temperature. Additionally, a well-controlled morphology and porosity are beneficial for reversible energy storage. In fact, these carbon materials delivered high specific capacity, stable cycling performances, and exceptional rate capability even under extremely fast charging conditions when integrated as an anode in lithium-ion batteries (LIBs). The present approach not only demonstrated efficient upcycling of CO2 into porous carbon suitable for enhanced energy storage but can also contribute to a clean and green energy technology that can reduce carbon emissions to achieve sustainable energy goals.

Insights into the Chemistry of the Cathodic Electrolyte Interphase for PTFE-Based Dry-Processed Cathodes.

Dry processing is a promising method for high-performance and low-cost lithium-ion battery manufacturing which uses polytetrafluoroethylene (PTFE) as a binder. However, the electrochemical stability of the PTFE binder in the cathodes and the generated chemistry of the cathode electrolyte interphase (CEI) layers are rarely reported. Herein, the CEI properties and PTFE electrochemical stability are studied via cycling the high-loading dry-processed electrodes in electrolytes with LiPF6 or LiClO4 salt. Using LiClO4 salt can eliminate other possible F sources, allowing the decomposition of PTFE to be studied. The detection of LiF in cells with the LiClO4 salt confirms that PTFE undergoes side reaction(s) in the cathodes. When compared with LiClO4, the CEI layer is much thicker when LiPF6 is used as the electrolyte salt. These results provide insights into the CEI layer and may potentially enlighten the development of binders and electrolytes for the high efficiency and long durability of DP-based LIBs.

Stable Supercapacity of Binder-Free TiO2(B) Epitaxial Electrodes for All-Solid-State Nanobatteries.

Owing to its pseudocapacitive, unidimensional, rapid ion channels, TiO2(B) is a promising material for application to battery electrodes. In this study, we align these channels by epitaxially growing TiO2(B) films with the assistance of an isostructural VO2(B) template layer. In a liquid electrolyte, binder-free TiO2(B) epitaxial electrodes exhibit a supercapacity near the theoretical value of 335 mA h g-1 and an excellent charge-discharge reproducibility for ≥200 cycles, which outperform those of other TiO2(B) nanostructures. For the all-solid-state configuration employing the LiPON solid electrolyte, excellent stability persists. Our findings suggest excellent potential for miniaturizing all-solid-state nanobatteries in self-powered integrated circuits.

Slug Flow Coprecipitation Synthesis of Uniformly-Sized Oxalate Precursor Microparticles for Improved Reproducibility and Tap Density of Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials.

The microparticle quality and reproducibility of Li(Ni0.8Co0.1Mn0.1)O2 (NCM811) cathode materials are important for Li-ion battery performance but can be challenging to control directly from synthesis. Here, a scalable reproducible synthesis process is designed based on slug flow to rapidly generate uniform micron-size spherical-shape NCM oxalate precursor microparticles at 25-34 °C. The whole process takes only 10 min, from solution mixing to precursor microparticle generation, without needing aging that typically takes hours. These oxalate precursors are convertible to spherical-shape NCM811 oxide microparticles, through a preliminary design of low heating rates (e.g., 0.1 and 0.8 °C/min) for calcination and lithiation. The outcome oxide cathode particles also demonstrate improved tap density (e.g., 2.4 g mL-1 for NCM811) and good specific capacity (202 mAh g-1 at 0.1 C) in coin cells and reasonably good cycling performance with LiF coating.

Operando Analysis of Gas Evolution in TiNb2O7 (TNO)-Based Anodes for Advanced High-Energy Lithium-Ion Batteries under Fast Charging.

TiNb2O7 (TNO) is regarded as one of the promising next-generation anode materials for lithium-ion batteries (LIBs) due to its high rate capabilities, higher theoretical capacity, and higher lithiation voltage. This enables the cycling of TNO-based anodes under extreme fast charging (XFC) conditions with a minimal risk of lithium plating compared to that of graphite anodes. Here, the gas evolution in real time with TNO-based pouch cells is first reported via operando mass spectrometry. The main gases are identified to be CO2, C2H4, and O2. A solid-electrolyte interphase is detected on TNO, which continues evolving, forming, and dissolving with the lithiation and delithiation of TNO. The gas evolution can be significantly reduced when a protective coating is applied on the TNO particles, reducing the CO2 and C2H4 evolution by ∼2 and 5 times, respectively, at 0.1C in a half-cell configuration. The reduction on gas generation in full cells is even more pronounced. The surface coating also enables 20% improvement in capacity under XFC conditions.

Ionic Liquid-Directed Nanoporous TiNb2 O7 Anodes with Superior Performance for Fast-Rechargeable Lithium-Ion Batteries.

Nanoporous TiNb2 O7 (NPTNO) material is synthesized by a sol-gel method with an ionic liquid (IL) as the nanoporous structure directing template. NPTNO exhibits a high reversible capacity of 210 mAh g-1 even at the charging rate of 50 C and an excellent cyclability of half-cell capacity retention of 74% for 1000 cycles at 5 C and LiNi0.5 Mn1.5 O4 -coupled full-cell capacity retentions of 81% and 87% for 1000 cycles at 1 C and 2 C, respectively. The studies of the 1000 cycled NPTNO electrode illustrate that the IL-directed mesoporous structure can enhance the cyclability of NPTNO cells due to the alleviation of repetitive mechanical stress and volume fluctuation induced by the repetitive Li+ insertion-extraction processes. The measured Li+ diffusion coefficients from the galvanostatic intermittent titration technique suggest that the IL-templating strategy indeed ensures the fast rechargeability of NPTNO cells based on the fast Li+ diffusion kinetics. Benefitting from the nanoporous structure, NPTNO with unhindered Li+ diffusion pathways achieves a superior rate capability in the titanium-based oxide materials and the best full-cell cyclability in the TNO materials. Therefore, the templating potential of IL is demonstrated, and the superb electrochemical performance establishes the IL-directed NPTNO as a promising anode candidate for fast-rechargeable LIBs.

Pretreatment HIV drug resistance in adults initiating antiretroviral therapy in China, 2017.

BACKGROUND: After the scale-up of antiretroviral therapy (ART) for HIV infected people, increasing numbers of patients have pretreatment drug resistance (PDR). In this study, the prevalence of PDR was evaluated in adults initiating antiretroviral therapy in China. METHODS: Blood samples were obtained from 1943 patients who initiated antiretroviral therapy (ART) in 2017 from 13 provinces or cities in China. Pol sequences were used to analyze drug resistance and construct transmission networks. Logistic regression model was used to estimate the potential factors associated with PDR. RESULTS: In total, 1711 eligible patients (76.0% male; 87.8% aged ≥ 25 years) were included, of which 117 (6.8%) had PDR. The highest rates of PDR were 12.2% in Liangshan Prefecture of Sichuan and 9.3 and 8.9% in Dehong and Lincang Prefecture of Yunnan. A multivariate logistic regression analysis revealed that PDR was significantly higher among intravenous drug users (adjusted Odds Ratio (aOR) = 2.64, 95% CI: 1.57-4.44) and individuals from Liangshan, Dehong, and Lincang (aOR = 2.04, 95% CI: 1.26-3.30). In total, 754 sequences were used to generate 164 transmission networks. Five transmission networks had two or three sequences containing the same mutations, two networks contained subjects from Liangshan, and one network contained subjects from Dehong. CONCLUSIONS: Overall, the PDR prevalence was moderate, with a particularly high prevalence in areas with severe HIV epidemics. These results indicate the importance of continuous PDR monitoring in patients initiating antiretroviral therapy.

Fluorination of MXene by Elemental F2 as Electrode Material for Lithium-Ion Batteries.

The transformation of MXene sheets into TiOF2 2D sheets with superior electrochemical performance was developed. MXene synthesized from Ti3 AlC2 was fluorinated for 3, 6, and 24 h, respectively, by means of a direct fluorination process. Exposure of MXene powder to elemental fluorine for 3 h induced the formation of CF2 groups and TiF3 on the surface, which have beneficial effects on the electrochemical performance. X-ray photoelectron spectroscopy suggested that after fluorinating the MXene sample for 6 h Ti2+ and Ti3+ were not present on the surface but only Ti4+ , indicating the formation of TiOF2 . XRD indicated that TiOF2 was present after fluorinating for 3 h, and after 24 h the MXene had transformed to TiOF2 with minor impurities remaining, maintaining its 2D layer morphology. The 24 h fluorinated sample with its TiOF2 phase showed superior capacity that increased with cycle number. It also had a better rate capability than non-2D-layered TiOF2 , indicating the advantage of the 2D-layered morphology derived from the parent MXene phase.

Ion Dynamics in Ionic-Liquid-Based Li-Ion Electrolytes Investigated by Neutron Scattering and Dielectric Spectroscopy.

A detailed understanding of the diffusion mechanisms of ions in pure and doped ionic liquids remains an important aspect in the design of new ionic-liquid electrolytes for energy storage. To gain more insight into the widely used imidazolium-based ionic liquids, the relationship between viscosity, ionic conductivity, diffusion coefficients, and reorientational dynamics in the ionic liquid 3-methyl-1-methylimidazolium bis(trifluoromethanesulfonyl)imide (DMIM-TFSI) with and without lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI) was examined. The diffusion coefficients for the DMIM+ cation and the role of ion aggregates were investigated by using the quasielastic neutron scattering (QENS) and neutron spin echo techniques. Two diffusion mechanisms are observed for the DMIM+ cation with and without Li-TFSI, that is, translational and local. The data additionally suggest that Li+ ion transport along with ion aggregates, known as the vehicle mechanism, may play a significant role in the ion diffusion process. These dielectric-spectroscopy investigations in a broad temperature and frequency range reveal a typical α-ß-relaxation scenario. The α relaxation mirrors the glassy freezing of the dipolar ions, and the ß relaxation exhibits the signatures of a Johari-Goldstein relaxation. In contrast to the translational mode detected by neutron scattering, arising from the decoupled faster motion of the DMIM+ ions, the α relaxation is well coupled to the dc charge transport, that is, the average translational motion of all three ion species in the material. The local diffusion process detected by QENS is only weakly dependent on temperature and viscosity and can be ascribed to the typical fast dynamics of glass-forming liquids.

Methyl quantum tunneling in ionic liquid [DMIm][TFSI] facilitated by Bis(trifluoromethane)sulfonimide lithium salt.

We probe, for the first time, quantum tunneling in the methyl groups of the ionic liquid [DMIm][TFSI] facilitated by the presence of Bis(trifluoromethane)sulfonimide lithium salt. The observation of tunneling is made possible by crystallization, rather than vitrification, of [DMIm][TFSI] at low temperature. Neutron scattering measurements detect quantum tunneling excitations at ~27 µeV at temperatures below 30 K in the presence of LiTFSI at a concentration of 1 mol/kg, but not in salt-free [DMIm][TFSI]. This indicates that the methyl rotational potential barrier is reduced by the presence of LiTFSI, thus bringing the tunneling excitations into the measurable range. The salt-induced reduction of the rotational barrier is corroborated by quasi-elastic scattering data associated with stochastic re-orientation of methyl groups measured between 40 and 60 K.

Ionic liquids and derived materials for lithium and sodium batteries.

The ever-growing demand for advanced energy storage devices in portable electronics, electric vehicles and large scale power grids has triggered intensive research efforts over the past decade on lithium and sodium batteries. The key to improve their electrochemical performance and enhance the service safety lies in the development of advanced electrode, electrolyte, and auxiliary materials. Ionic liquids (ILs) are liquids consisting entirely of ions near room temperature, and are characterized by many unique properties such as ultralow volatility, high ionic conductivity, good thermal stability, low flammability, a wide electrochemical window, and tunable polarity and basicity/acidity. These properties create the possibilities of designing batteries with excellent safety, high energy/power density and long-term stability, and also provide better ways to synthesize known materials. IL-derived materials, such as poly(ionic liquids), ionogels and IL-tethered nanoparticles, retain most of the characteristics of ILs while being endowed with other favourable features, and thus they have received a great deal of attention as well. This review provides a comprehensive review of the various applications of ILs and derived materials in lithium and sodium batteries including Li/Na-ion, dual-ion, Li/Na-S and Li/Na-air (O2) batteries, with a particular emphasis on recent advances in the literature. Their unique characteristics enable them to serve as advanced resources, medium, or ingredient for almost all the components of batteries, including electrodes, liquid electrolytes, solid electrolytes, artificial solid-electrolyte interphases, and current collectors. Some thoughts on the emerging challenges and opportunities are also presented in this review for further development.

Aromatic Polyimide/Graphene Composite Organic Cathodes for Fast and Sustainable Lithium-Ion Batteries.

A composite organic cathode material based on aromatic polyimide (PI) and highly conductive graphene was prepared through a facile in situ polymerization method for application in lithium-ion batteries. The in situ polymerization generated intimate contact between PI and electronically conductive graphene, resulting in conductive composites with highly reversible redox reactions and good structure stability. The synergistic effect between PI and graphene enabled not only a high reversible capacity of 232.6 mAh g-1 at a charge-discharge rate of C/10 but also exceptionally high-rate cycling stability, that is, a high capacity of 108.9 mAh g-1 at a very high charge-discharge rate of 50C with a capacity retention of 80 % after 1000 cycles. This improved electrochemical performance resulted from the combination of stable redox reversibility of PI and high electronic conductivity of the graphene additive. The graphene-based composite also exhibited much better performance than composites based on multi-walled carbon nanotubes and the conductive carbon black C45 in terms of specific capacity and long-term cycling stability under the same charge-discharge rates.

Persistent Electrochemical Performance in Epitaxial VO2(B).

Discovering high-performance energy storage materials is indispensable for renewable energy, electric vehicle performance, and mobile computing. Owing to the open atomic framework and good room temperature conductivity, bronze-phase vanadium dioxide [VO2(B)] has been regarded as a highly promising electrode material for Li ion batteries. However, previous attempts were unsuccessful to show the desired cycling performance and capacity without chemical modification. Here, we show with epitaxial VO2(B) films that one can accomplish the theoretical limit for capacity with persistent charging-discharging cyclability owing to the high structural stability and unique open pathways for Li ion conduction. Atomic-scale characterization by scanning transmission electron microscopy and density functional theory calculations also reveal that the unique open pathways in VO2(B) provide the most stable sites for Li adsorption and diffusion. Thus, this work ultimately demonstrates that VO2(B) is a highly promising energy storage material and has no intrinsic hindrance in achieving superior cyclability with a very high power and capacity in a Li-ion conductor.

Membrane-Based Gas Separation Accelerated by Hollow Nanosphere Architectures.

The coupling of hollow carbon nanospheres with triblock copolymers is a promising strategy to fabricate mixed-matrix membranes. This is because the symmetric microporous shells combine with the hollow space to promote gas transport, and the unique soft-rigid molecular structure of triblock copolymers can accommodate a high loading of fillers without a significant loss of mechanical strength.

Tandem dissolution of UO3 in amide-based acidic ionic liquid and in situ electrodeposition of UO2 with regeneration of the ionic liquid: a closed cycle.

A closed cycle is demonstrated for the tandem dissolution and electroreduction of UO3 to UO2 with regeneration of the acidic ionic liquid. The dissolution is achieved by use of the acidic ionic liquid [DMAH][NTf2] in [EMIM][NTf2] serving as the diluent. A sequential dissolution, electroreduction, and regeneration cycle is presented.

Polymer gel electrolytes for application in aluminum deposition and rechargeable aluminum ion batteries.

A polymer gel electrolyte using AlCl3 complexed acrylamide as a functional monomer and acidic ionic liquid based on a mixture of 1-ethyl-3-methylimidazolium chloride (EMImCl) and AlCl3 (EMImCl-AlCl3, 1-1.5, in molar ratio) as a plasticizer has been successfully prepared for the first time via free radical polymerization. Aluminum deposition is successfully achieved using a polymer gel electrolyte containing 80 wt% ionic liquid. The polymer gel electrolytes are also good candidates for rechargeable aluminum ion batteries.

A high performance hybrid battery based on aluminum anode and LiFePO4 cathode.

A novel hybrid battery utilizing an aluminum anode, a LiFePO4 cathode and an acidic ionic liquid electrolyte based on 1-ethyl-3-methylimidazolium chloride (EMImCl) and aluminum trichloride (AlCl3) (EMImCl-AlCl3, 1-1.1 in molar ratio) with or without LiAlCl4 is proposed. The hybrid ion battery delivers an initial high capacity of 160 mA h g(-1) at a current rate of C/5. It also shows good rate capability and cycling performance.

Polymerized Ionic Networks with High Charge Density: Quasi-Solid Electrolytes in Lithium-Metal Batteries.

Polymerized ionic networks (PINs) with six ion pairs per repeating unit are synthesized by nucleophilic-substitution-mediated polymerization or radical polymerization of monomers bearing six 1-vinylimidazolium cations. PIN-based solid-like electrolytes show good ionic conductivities (up to 5.32 × 10(-3) S cm(-1) at 22°C), wide electrochemical stability windows (up to 5.6 V), and good interfacial compatibility with the electrodes.