Scaling relationships between the total number of leaves and the total leaf area per culm of two dwarf bamboo species.

Total leaf area per plant is an important measure of the photosynthetic capacity of an individual plant that together with plant density drives the canopy leaf area index, that is, the total leaf area per unit ground area. Because the total number of leaves per plant (or per shoot) varies among conspecifics and among mixed species communities, this variation can affect the total leaf area per plant and per canopy but has been little studied. Previous studies have shown a strong linear relationship between the total leaf area per plant (or per shoot) (A T) and the total number of leaves per plant (or per shoot) (N T) on a log-log scale for several growth forms. However, little is known whether such a scaling relationship also holds true for bamboos, which are a group of Poaceae plants with great ecological and economic importance in tropical, subtropical, and warm temperate regions. To test whether the scaling relationship holds true in bamboos, two dwarf bamboo species (Shibataea chinensis Nakai and Sasaella kongosanensis 'Aureostriatus') with a limited but large number of leaves per culm were examined. For the two species, the leaves from 480 and 500 culms, respectively, were sampled and A T was calculated by summing the areas of individual leaves per culm. Linear regression and correlation analyses reconfirmed that there was a significant log-log linear relationship between A T and N T for each species. For S. chinensis, the exponent of the A T versus N T scaling relationship was greater than unity, whereas that of S. kongosanensis 'Aureostriatus' was smaller than unity. The coefficient of variation in individual leaf area increased with increasing N T for each species. The data reconfirm that there is a strong positive power-law relationship between A T and N T for each of the two species, which may reflect adaptations of plants in response to intra- and inter-specific competition for light.

Using Surface Immunogenic Protein as a Carrier Protein to Elicit Protective Antibody to Multiple Serotypes for Candidate Group B Streptococcal Glycan Conjugate Vaccines.

Group B Streptococcus (GBS) is a life-threatening opportunistic pathogen, particularly in pregnant women, infants, and the elderly. Currently, maternal vaccination is considered the most viable long-term option for preventing GBS mother-to-infant infection, and two polysaccharide conjugate vaccines utilizing CRM197 as a carrier protein have undergone clinical phase II trials. Surface immunogenic protein (Sip), present in all identified serotypes of GBS strains so far, is a protective surface protein of GBS. In this study, the type Ia capsular polysaccharide (CPS) of GBS was utilized as a model to develop candidate antigens for a polysaccharide conjugate vaccine by coupling it with the Sip of GBS and the traditional carrier protein CRM197. Serum analysis from immunized New Zealand rabbits and CD1 mice revealed that there was no significant difference in antibody titers between the Ia-Sip group and Ia-CRM197 group; however, both were significantly higher than those observed in the Ia polysaccharide group. Opsonophagocytosis and passive immune protection results using rabbit serum indicated no significant difference between the Ia-Sip and Ia-CRM197 groups, both outperforming the Ia polysaccharide group. Furthermore, serum from the Ia-Sip group had a cross-protective effect on multiple types of GBS strains. The challenge test results in CD1 mice demonstrated that the Ia-Sip group provided complete protection against lethal doses of bacteria and also showed cross-protection against type III strain. Our study demonstrates for the first time that Ia-Sip is immunogenic and provides serotype-independent protection in glycan conjugate vaccines, which also indicates Sip may serve as an excellent carrier protein for GBS glycan conjugate vaccines and provide cross-protection against multiple GBS strains.

Resolving candidate genes of duck ovarian tissue transplantation via RNA-Seq and expression network analyses.

This study aims to identify candidate genes related to ovarian development after ovarian tissue transplantation through transcriptome sequencing (RNA-seq) and expression network analyses, as well as to provide a reference for determining the molecular mechanism of improving ovarian development following ovarian tissue transplantation. We collected ovarian tissues from 15 thirty-day-old ducks and split each ovary into 4 equal portions of comparable sizes before orthotopically transplanting them into 2-day-old ducks. Samples were collected on days 0 (untransplanted), 3, 6, and 9. The samples were paraffin sectioned and then subjected to Hematoxylin-Eosin (HE) staining and follicular counting. We extracted RNA from ovarian samples via the Trizol method to construct a transcriptome library, which was then sequenced by the Illumina Novaseq 6000 sequencing platform. The sequencing results were examined for differentially expressed genes (DEG) through gene ontology (GO) function and the Kyoto encyclopedia of genes and genomes (KEGG) pathway analyses, gene set enrichment analysis (GSEA), weighted correlation network analysis (WGCNA), and protein-protein interaction (PPI) networks. Some of the candidate genes were selected for verification using real-time fluorescence quantitative PCR (qRT-PCR). Histological analysis revealed a significant reduction in the number of morphologically normal follicles at 3, 6, and 9 d after ovarian transplantation, along with significantly higher abnormality rates (P < 0.05). The transcriptome analysis results revealed 2,114, 2,224, and 2,257 upregulated DEGs and 2,647, 2,883, and 2,665 downregulated DEGs at 3, 6, and 9 d after ovarian transplantation, respectively. Enrichment analysis revealed the involvement multiple pathways in inflammatory signaling, signal transduction, and cellular processes. Furthermore, WGCNA yielded 13 modules, with 10, 4, and 6 candidate genes mined at 3, 6 and 9 d after ovarian transplantation, respectively. Transcription factor (TF) prediction showed that STAT1 was the most important TF. Finally, the qRT-PCR verification results revealed that 12 candidate genes exhibited an expression trend consistent with sequencing data. In summary, significant differences were observed in the number of follicles in duck ovaries following ovarian transplantation. Candidate genes involved in ovarian vascular remodeling and proliferation were screened using RNA-Seq and WGCNA.

A dataset of endorheic basins on detailed delineation and classification for the Qinghai-Tibet Plateau.

Endorheic basins are important geomorphological and ecological units on the Qinghai-Tibet Plateau (QTP), which is undergoing a rapid evolution of its lake system structure and drainage reorganization that is threatening local ecology, infrastructures and residuals owing to climate change. This dataset provides a detailed delineation and classification of endorheic basins on the QTP for understanding the complex dynamics under climate changes. A newly-developed algorithm, namely the Joint Elevation-Area Threshold (JEAT) algorithm (Liu et al, 2024), is applied for delineating endorheic basins based on digital elevation model (DEM). A total of 184 endorheic basins were divided, of which the permanent divide lines were characterized. All the endorheic basins were further categorized into five groups based on the hydraulic connectivity attributes, which have been commonly observed since 2000. The dataset also includes basic information such as drainage area, water surface area, and water storage volume of each endorheic basin. It is particularly beneficial for digital watershed analysis towards ecological restoration and water resource management on the environmentally vulnerable QTP.

Application of 3D visualization technology based on hematoma edge key points setting for emergency hypertensive cerebral hemorrhage surgery in primary hospitals.

OBJECTIVE: This study aims to explore the application potential of 3D visualization technology based in emergency hypertensive cerebral hemorrhage surgery in primary hospitals. The specific goal is to use 3DSlicer software to perform 3D reconstruction and body surface projection on patients with hypertensive cerebral hemorrhage, provide accurate hematoma location information, help surgeons determine the specific location of hematoma on the body surface, and reduce the expansion of surgical incisions. METHODS: 3D reconstruction technology based on 3DSlicer software was employed to process CT images of patients with cerebral hemorrhage. By segmenting and reconstructing the images, a 3D model of the hematoma was generated and projected onto the patient's body surface. Utilizing the functionalities of 3DSlicer software in conjunction with the surgeon's anatomical knowledge, accurate hematoma positioning on the body surface was achieved. RESULTS: 23 patients were enrolled in this study, and underwent successful surgical evacuation. The implementation of 3D visualization technology using 3DSlicer software is expected to provide precise hematoma localization information for emergency hypertensive intracerebral hemorrhage surgery in primary hospitals. This approach will enable surgeons to accurately determine the appropriate surgical incision, thereby minimizing unnecessary trauma and improving the overall success rate of surgery. CONCLUSION: This study demonstrates the potential application of 3D visualization technology based on 3DSlicer software in emergency hypertensive cerebral hemorrhage surgery within primary hospitals. By utilizing 3DSlicer software for hematoma localization, accurate information support can be provided to assist surgeons in managing patients with hypertensive cerebral hemorrhage.

Phase Transition Liquid Metal Enabled Emerging Biomedical Technologies and Applications.

Phase change materials that can absorb or release large amounts of heat during phase transition, play a critical role in many important processes, including heat dissipation, thermal energy storage, and solar energy utilization. In general, phase change materials are usually encapsulated in passive modules to provide assurance for energy management. The shape and mechanical changes of these materials are greatly ignored. An emerging class of phase change materials, liquid metals (LMs) have attracted significant interest beyond thermal management, including in transformable robots, flexible electronics, soft actuators, and biomedicine. Interestingly, the melting point of LM is highly tunable around body temperature, allowing it to experience considerable stiffness change when interacting with human organisms during solid-liquid change, which brings about novel phenomena, applied technologies, and therapeutic methods, such as mechanical destruction of tumors, neural electrode implantation technique, and embolization therapy. This review focuses on the technology, regulation, and application of the phase change process along with diverse changes of LM to facilitate emerging biomedical applications based on the influences of mechanical stiffness change and versatile regulation strategies. Typical applications will also be categorized and summarized. Lastly, the advantages and challenges of using the unique and reversible process for biomedicine will be discussed.

Simultaneous Visualization of the Thoracic Duct and Blood Vessels Using MRI: A Comparison Between Balanced Turbo-field-echo and Spin-echo.

OBJECTIVE: Magnetic resonance thoracic ductography (MRTD), concomitant with blood vessel imaging, provides useful anatomical information. The purpose of this study was to assess the visibility of the thoracic duct and blood vessels simultaneously by MRTD using balanced turbo-field-echo (bTFE) and turbo spin-echo (TSE). METHODS: MRTDs concomitant with blood vessel imaging on bTFE and TSE were obtained for 10 healthy volunteers with a 1.5T-magnetic resonance unit. Visibility of the thoracic duct, blood vessels in the thoracic region; motion artifacts; and overall image quality were scored by two radiologists using three-to-five-point scales; those were compared between bTFE and TSE. RESULTS: The thoracic duct was generally well-visualized on MRTD sequences. The upper part of the thoracic duct was better visualized on TSE than on bTFE (p < 0.05). The blood vessels were well visualized on bTFE and TSE; the bilateral subclavian arteries and the right subclavian veins were better visualized on TSE than on bTFE (all p < 0.05). Motion artifacts and overall image quality were better on TSE than on bTFE (p = 0.0039 and 0.0020, respectively). CONCLUSION: MRTD concomitant with blood vessel imaging on TSE has better visibility of the thoracic duct and blood vessels than bTFE.

A Photothermally Enhanced Vancomycin-Coated Liquid Metal Antimicrobial Agent with Targeting Capability.

The targeted antimicrobial efficacy of Vancomycin decreases significantly over time due to bacterial resistance, whereas Ga-based liquid metals, which are less prone to inducing bacterial resistance, face challenges in achieving targeted antimicrobial effects. To tackle these issues, a highly efficient antimicrobial agent with targeting properties has been developed by combining Ga-based liquid metals and Vancomycin. Moreover, the performance of this antimicrobial agent can be greatly enhanced through the use of near-infrared light. Microscopic observations reveal that Vancomycin can be effectively encapsulated on the surface of liquid metal, facilitated by the presence of the oxide layer. The resulting core-shell structured antimicrobial agent demonstrates notable targeted antimicrobial effects against S. aureus. Antibacterial tests indicate that Vancomycin effectively improves the antibacterial properties of pure liquid metal. Additionally, this study unveils the excellent photothermal conversion capabilities of liquid metal, enabling the antimicrobial agent exposed to 808nm near-infrared light to exhibit significantly strengthened bactericidal performance. In this scenario, the antimicrobial agent can achieve nearly 100% effectiveness. This work enriches the investigation of integrating Ga-based antimicrobial agents with traditional antibiotics, showcasing promising antibacterial effects and establishing the groundwork for subsequent clinical applications.

Automatic detection of punctate white matter lesions in infants using deep learning of composite images from two cases.

Punctate white matter lesions (PWMLs) in infants may be related to neurodevelopmental outcomes based on the location or number of lesions. This study aimed to assess the automatic detectability of PWMLs in infants on deep learning using composite images created from several cases. To create the initial composite images, magnetic resonance (MR) images of two infants with the most PWMLs were used; their PWMLs were extracted and pasted onto MR images of infants without abnormality, creating many composite PWML images. Deep learning models based on a convolutional neural network, You Only Look Once v3 (YOLOv3), were constructed using the training set of 600, 1200, 2400, and 3600 composite images. As a result, a threshold of detection probability of 20% and 30% for all deep learning model sets yielded a relatively high sensitivity for automatic PWML detection (0.908-0.957). Although relatively high false-positive detections occurred with the lower threshold of detection probability, primarily, in the partial volume of the cerebral cortex (≥ 85.8%), those can be easily distinguished from the white matter lesions. Relatively highly sensitive automatic detection of PWMLs was achieved by creating composite images from two cases using deep learning.

Flexible Skin Patch Enabled Tumor Hybrid Thermophysical Therapy and Adaptive Antitumor Immune Response.

Innovations on materials and technologies have greatly promoted the rapid development of wearable electronics from disease diagnosis to therapeutics. For superficial skin tumors, skin-attachable patches possess the advantages of minimally invasive property, alleviative side effects, and high efficiency. The development of noninvasive techniques and devices is still in urgent demands. Here, a flexible skin patch fabricated through a facile preparation method is reported for noninvasive hybrid thermophysical therapy and adaptative immune function enhancement. The liquid metal enabled skin patch is demonstrated with high conductivity, certain stability, biocompatibility, and an enhanced adhesive merit on skin surfaces for cryoablation therapy and magnetic hyperthermia therapy. The skin patch exhibits remarkably conformable heating and cooling performance toward the treatment of 4T1 breast tumors. The magnetic resonance images also indicate the significant tumor ablation effect. Interestingly, a relatively stable proportion of both CD8+ T and CD4+ T cells in the peripheral blood is identified after tumor therapy in comparison with the decreased trend in the untreated group, representing an efficient antitumor immune response induced by the skin patch. The developed skin patch would provide a promising noninvasive approach for tumor therapies by direct tumor destruction and maintenance of the antitumor immune response.

Toxicity and Biocompatibility of Liquid Metals.

Recently, room-temperature liquid metals have attracted increasing attention from researchers owing to their excellent material properties. Systematic interpretation of the potential toxicity issues involved is essential for a wide range of applications, especially in the biomedical and healthcare fields. However, even with the exponential growth of related studies, investigation of the toxicological impact and possible hazards of liquid metals to organisms is still in its infancy. This review aims to provide a comprehensive summary of the current frontier of knowledge on liquid metal toxicology and biocompatibility in different environments. Based on recent studies, this review focuses on Ga and Bi-based in different states. It is necessary to evaluate their toxicity considering the rapid increase in research and utilization of such liquid metal composites. Finally, existing challenges are discussed and suggestions are provided for further investigation of liquid metal toxicology to clarify the toxicological mechanisms and strategies are provided to avoid adverse effects. In addition to resolving the doubts of public concern about the toxicity of liquid metals, this review is expected to promote the healthy and sustainable development of liquid metal-based materials and their use in diverse areas, especially those related to health care.

Discovery of novel analogs of KHS101 as transforming acidic coiled coil containing protein 3 (TACC3) inhibitors for the treatment of glioblastoma.

Transforming acidic coiled coil containing protein 3 (TACC3) is emerging as an attractive anticancer target in recent years, however, few TACC3 small-molecular inhibitors have been reported up to now. In this study, fifteen compounds were designed and synthesized based on the lead compound KHS101 to find more potent TACC3 inhibitors. Among them, the most potent compound 7g exhibited about 10-folds more potent antiproliferative activities than KHS101 in various cancer cell lines. Two different protein-drug binding assays including DARTS, and CETSA revealed TACC3 as a biologically relevant target of compound 7g. In addition, compound 7g induced cell cycle arrest at the G2/M phase and induced cell apoptosis. Furthermore, compound 7g depolarized the MMP and induced ROS generation in a dose-dependent manner in U87 cells. More importantly, 7g reduced tumor weight by 72.7% in U87 xenograft model at a dose of 20 mg/kg/day without obvious toxicity. Altogether, compound 7g deserved further investigations as a novel, safe and efficacious TACC3 inhibitor for the treatment of GBM.

Gallium-Based Liquid Metal Materials for Antimicrobial Applications.

The hazards caused by drug-resistant bacteria are rocketing along with the indiscriminate use of antibiotics. The development of new non-antibiotic antibacterial drugs is urgent. The excellent biocompatibility and diverse multifunctionalities of liquid metal have stimulated the studies of antibacterial application. Several gallium-based antimicrobial agents have been developed based on the mechanism that gallium (a type of liquid metal) ions disorder the normal metabolism of iron ions. Other emerging strategies, such as physical sterilization by directly using LM microparticles to destroy the biofilm of bacteria or thermal destruction via infrared laser irradiation, are gaining increasing attention. Different from traditional antibacterial agents of gallium compounds, the pronounced property of gallium-based liquid metal materials would bring innovation to the antibacterial field. Here, LM-based antimicrobial mechanisms, including iron metabolism disorder, production of reactive oxygen species, thermal injury, and mechanical destruction, are highlighted. Antimicrobial applications of LM-based materials are summarized and divided into five categories, including liquid metal motors, antibacterial fabrics, magnetic field-responsive microparticles, liquid metal films, and liquid metal polymer composites. In addition, future opportunities and challenges towards the development and application of LM-based antimicrobial materials are presented.

Phase-Transitional Bismuth-Based Metals enable Rapid Embolotherapy, Hyperthermia, and Biomedical Imaging.

Embolization has been an important minimally invasive therapy for occlusion of malfunctioned vasculature and tumor treatment via target delivering embolic agents. The limitation of conventional embolic agents, such as fabrication process, precipitation time, invisibility, and lack of integrated functions often leads to insufficient embolization efficacy. To overcome these drawbacks, a multifunctional bismuth (Bi)-based liquid embolic agent for simultaneous realization of embolotherapy, thermotherapy, as well as high-contrast biomedical imaging is proposed. Benefitting from the suitable melting point, flexible nature, metallic merit, and easygoing operation via injection, the versatile embolic agent can achieve rapid liquid-solid phase transition, magnetic hyperthermia, and multimodal imaging capability. The Bi-based materials are demonstrated with excellent arteriovenous embolization efficiency and favorable biocompatibility according to in vivo investigations. Introduction of the liquid embolic agent to tumor arteries achieves evident tumor regression and rather clear imaging under computed tomography (CT), magnetic resonance imaging (MRI), and thermographs for consistently tracking the implants over the biological body. Further, the combined therapy coupled with thermotherapy exhibits improved therapeutic efficiency with formation of necrosis and total tumor eradiation at day 15 after the treatment. The present innovative embolic agent and the surgical principle provide a promising modality for embolization and potential theranostic platform of tumors.

PRDX2 Knockdown Inhibits Extracellular Matrix Synthesis of Chondrocytes by Inhibiting Wnt5a/YAP1/CTGF and Activating IL-6/JAK2/STAT3 Pathways in Deer Antler.

Although peroxiredoxin 2 (PRDX2) plays a vital role in relieving oxidative stress, its physiological function in cartilage development remains almost unknown. In this study, we found that the expression of PRDX2 significantly increased in the chondrocytes compared with pre-chondrocytes. PRDX2 knockdown significantly decreased the expression of extracellular matrix (ECM) protein (Col2a and Aggrecan), which led to blocked cartilage formation. Moreover, PRDX2 knockdown also inhibited the expression of connective tissue growth factor (CTGF). CTGF is an important growth factor that regulates synthesis of ECM proteins. We explored the possible regulatory mechanism by which PRDX2 regulated the expression of CTGF. Our results demonstrated that PRDX2 knockdown downregulated the expression of CTGF by inhibiting Wnt5a/Yes-associated protein 1 (YAP1) pathway. In addition, PRDX2 knockdown promoted the expression of interleukin 6 (IL-6), indicating PRDX2 expression had an anti-inflammatory function during antler growth. Mechanistically, PRDX2 knockdown promoted cartilage matrix degradation by activating the IL-6-mediated Janus Kinase 2/Signal Transducer and Activator of Transcription 3 (JAK2/STAT3) signaling pathway. These results reveal that PRDX2 is a potential regulator that promotes cartilage extracellular matrix synthesis.

Exogenous Melatonin Activating Nuclear Factor E2-Related Factor 2 (Nrf2) Pathway via Melatonin Receptor to Reduce Oxidative Stress and Apoptosis in Antler Mesenchymal Stem Cells.

Antler growth depends on the proliferation and differentiation of mesenchymal stem cells (MSCs), and this process may be adversely affected by oxidative stress. Melatonin (MLT) has antioxidant functions, but its role in Cervidae remains largely unknown. In this article, flow cytometry, reactive oxygen species (ROS) identification, qPCR, and other methods were used to investigate the protective mechanism of MLT in H2O2-induced oxidative stress of antler MSCs. The results showed that MLT significantly increases cell viability by relieving the oxidative stress of antler MSCs. MLT inhibits cell apoptosis by protecting mitochondrial function. We blocked the melatonin receptor with luzindole (Luz) and found that the receptor blockade significantly increases H2O2-induced hyperoxide levels and causes significant inhibition of mitochondrial function. MLT treatment activates the nuclear factor E2-related factor 2 (Nrf2) antioxidant signaling pathway, up-regulates the expression of NAD(P)H quinone oxidoreductase 1 (NQO1) and other genes and it could inhibit apoptosis. In contrast, the melatonin receptor blockade down-regulates the expression of Nrf2 pathway-related genes, but significantly up-regulates the expression of apoptotic genes. It was indicated that MLT activates the Nrf2 pathway through the melatonin receptor and alleviates H2O2-induced oxidative stress and apoptosis in antler MSCs. This study provides a theoretical basis for further studying the oxidative stress and antioxidant process of antler MSCs and, thereby, increasing antler yields.

Melatonin Promotes Antler Growth by Accelerating MT1-Mediated Mesenchymal Cell Differentiation and Inhibiting VEGF-Induced Degeneration of Chondrocytes.

The sika deer is one type of seasonal breeding animal, and the growth of its antler is affected by light signals. Melatonin (MLT) is a neuroendocrine hormone synthesized by the pineal gland and plays an important role in controlling the circadian rhythm. Although the MLT/MT1 (melatonin 1A receptor) signal has been identified during antler development, its physiological function remains almost unknown. The role of MLT on antler growth in vivo and in vitro is discussed in this paper. In vivo, MLT implantation was found to significantly increase the weight of antlers. The relative growth rate of antlers showed a remarkable increased trend as well. In vitro, the experiment showed MLT accelerated antler mesenchymal cell differentiation. Further, results revealed that MLT regulated the expression of Collage type II (Col2a) through the MT1 binding mediated transcription of Yes-associated protein 1 (YAP1) in antler mesenchymal cells. In addition, treatment with vascular endothelial growth factor (VEGF) promoted chondrocytes degeneration by downregulating the expression of Col2a and Sox9 (SRY-Box Transcription Factor 9). MLT effectively inhibited VEGF-induced degeneration of antler chondrocytes by inhibiting the Signal transducers and activators of transcription 5/Interleukin-6 (STAT5/IL-6) pathway and activating the AKT/CREB (Cyclin AMP response-element binding protein) pathway dependent on Sox9 expression. Together, our results indicate that MLT plays a vital role in the development of antler cartilage.

Detecting lymph node metastasis of esophageal cancer on dual-energy computed tomography.

BACKGROUND: Using conventional computed tomography (CT), the accurate diagnosis of lymph node (LN) metastasis of esophageal cancer is difficult. PURPOSE: To examine dual-energy CT parameters to predict LN metastasis preoperatively in patients with esophageal cancer. MATERIAL AND METHODS: Twenty-six consecutive patients who underwent dual-energy CT before an esophageal cancer surgery (19 patients with LN metastases) were analyzed. The included LNs had a short-axis diameter of ≥4 mm and were confirmed to be resected on postoperative CT. Their short-axis diameter, CT value, iodine concentration (IC), and fat fraction were measured on early- and late-phase contrast-enhanced dual-energy CT images and compared between pathologically confirmed metastatic and non-metastatic LNs. RESULTS: In total, 51 LNs (34 metastatic and 17 non-metastatic) were included. In the early phase, IC and fat fraction were significantly lower in the metastatic than in the non-metastatic LNs (IC = 1.6 mg/mL vs. 2.2 mg/mL; fat fraction = 20.3% vs. 32.5%; both P < 0.05). Furthermore, in the late phase, IC and fat fraction were significantly lower in the metastatic than in the non-metastatic LNs (IC = 2.0 mg/mL vs. 3.0 mg/mL; fat fraction = 20.4% vs. 33.0%; both P < 0.05). Fat fraction exhibited accuracies of 82.4% and 78.4% on early- and late-phase images, respectively. Conversely, short-axis diameter and CT value on both early- and late-phase images were not significantly different between the metastatic and non-metastatic LNs (P > 0.05). CONCLUSION: Using dual-energy CT images, IC and fat fraction are useful for diagnosing LN metastasis in patients with esophageal cancer.

Simultaneous electrochemical determination of nitrophenol isomers based on macroporous carbon functionalized with amino-bridged covalent organic polycalix[4]arenes.

A glassy carbon electrode (GCE) modified by a hybrid, macroporous carbon (MPC) functionalized with triazine bridged covalent organic polycalix[4]arenes (CalCOP) (CalCOP-MPC), has been fabricated and utilized for simultaneous detection of nitrophenols (NP). The obtained CalCOP-MPC were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), which confirmed that MPC had functionalized with CalCOP successfully. Benefiting from the synergistic supramolecular effect of macrocyclic receptor of CalCOP and the excellent electrical properties of MPC, the anodic peaks of o-nitrophenol (o-NP), m-nitrophenol (m-NP), and p-nitrophenol (p-NP) in their mixture can be well separated by the prepared electrode. Differential pulse voltammetry (DPV) measurements at CalCOP-MPC/GCE revealed that the linear ranges of NP isomers were all 1-400 µM, and the detection limit limits were 0.383 µM, 0.122 µM, and 0.212 µM for o-NP, m-NP, and p-NP, respectively. Moreover, the prepared modified electrodes showed a relatively good selectivity and stability, implying the prospect for detecting NP in real environmental samples.