RESUMO
All-solid-state batteries with metallic lithium (LiBCC ) anode and solid electrolyte (SE) are under active development. However, an unstable SE/LiBCC interface due to electrochemical and mechanical instabilities hinders their operation. Herein, an ultra-thin nanoporous mixed ionic and electronic conductor (MIEC) interlayer (≈3.25 µm), which regulates LiBCC deposition and stripping, serving as a 3D scaffold for Li0 ad-atom formation, LiBCC nucleation, and long-range transport of ions and electrons at SE/LiBCC interface is demonstrated. Consisting of lithium silicide and carbon nanotubes, the MIEC interlayer is thermodynamically stable against LiBCC and highly lithiophilic. Moreover, its nanopores (<100 nm) confine the deposited LiBCC to the size regime where LiBCC exhibits "smaller is much softer" size-dependent plasticity governed by diffusive deformation mechanisms. The LiBCC thus remains soft enough not to mechanically penetrate SE in contact. Upon further plating, LiBCC grows in between the current collector and the MIEC interlayer, not directly contacting the SE. As a result, a full-cell having Li3.75 Si-CNT/LiBCC foil as an anode and LiNi0.8 Co0.1 Mn0.1 O2 as a cathode displays a high specific capacity of 207.8 mAh g-1 , 92.0% initial Coulombic efficiency, 88.9% capacity retention after 200 cycles (Coulombic efficiency reaches 99.9% after tens of cycles), and excellent rate capability (76% at 5 C).
RESUMO
In recent years, Li- and Mn-rich layered oxides (LMRs) have been vigorously explored as promising cathodes for next-generation, Li-ion batteries due to their high specific energy. Nevertheless, their actual implementation is still far from a reality since the trade-off relationship between the particle size and chemical reversibility prevents LMRs from achieving a satisfactory, industrial energy density. To solve this material dilemma, herein, a novel morphological and structural design is introduced to Li1.11 Mn0.49 Ni0.29 Co0.11 O2 , reporting a sub-micrometer-level LMR with a relatively delocalized, excess-Li system. This system exhibits an ultrahigh energy density of 2880 Wh L-1 and a long-lasting cycle retention of 83.1% after the 100th cycle for 45 °C full-cell cycling, despite its practical electrode conditions. This outstanding electrochemical performance is a result of greater lattice-oxygen stability in the delocalized excess-Li system because of the low amount of highly oxidized oxygen ions. Geometric dispersion of the labile oxygen ions effectively suppresses oxygen evolution from the lattice when delithiated, eradicating the rapid energy degradation in a practical cell system.
RESUMO
Solid electrolyte interphases generated using electrolyte additives are key for anode-electrolyte interactions and for enhancing the lithium-ion battery lifespan. Classical solid electrolyte interphase additives, such as vinylene carbonate and fluoroethylene carbonate, have limited potential for simultaneously achieving a long lifespan and fast chargeability in high-energy-density lithium-ion batteries (LIBs). Here we report a next-generation synthetic additive approach that allows to form a highly stable electrode-electrolyte interface architecture from fluorinated and silylated electrolyte additives; it endures the lithiation-induced volume expansion of Si-embedded anodes and provides ion channels for facile Li-ion transport while protecting the Ni-rich LiNi0.8Co0.1Mn0.1O2 cathodes. The retrosynthetically designed solid electrolyte interphase-forming additives, 5-methyl-4-((trifluoromethoxy)methyl)-1,3-dioxol-2-one and 5-methyl-4-((trimethylsilyloxy)methyl)-1,3-dioxol-2-one, provide spatial flexibility to the vinylene carbonate-derived solid electrolyte interphase via polymeric propagation with the vinyl group of vinylene carbonate. The interface architecture from the synthesized vinylene carbonate-type additive enables high-energy-density LIBs with 81.5% capacity retention after 400 cycles at 1 C and fast charging capability (1.9% capacity fading after 100 cycles at 3 C).
RESUMO
Nickel-rich layered oxides (LiNi1-x-yCoxMnyO2; (1 - x - y) ≥ 0.6), the high-energy-density cathode materials of lithium-ion batteries (LIBs), are seriously unstable at voltages higher than 4.5 V versus Li/Li+ and temperatures higher than 50 °C. Herein, we demonstrated that the failure mechanism of a nickel-rich layered oxide (LiNi0.6Co0.2Mn0.2O2) behind the instability was successfully suppressed by employing cyanoethyl poly(vinyl alcohol) having pyrrolidone moieties (Pyrd-PVA-CN) as a metal-ion-chelating gel polymer electrolyte (GPE). The metal-ion-chelating GPE blocked the plating of transition-metal ions dissolved from the cathode by capturing the ions (anode protection). High-concentration metal-ion environments developed around the cathode surface by the GPE suppressed the irreversible phase transition of the cathode material from the layered structure to the rock-salt structure (cathode protection). Resultantly, the capacity retention was significantly improved at a high voltage and a high temperature. Capacity retention and coulombic efficiency of a full-cell configuration of a nickel-rich layered oxide with graphite were significantly improved in the presence of the GPE especially at a high cutoff voltage (4.4 V) and an elevated temperature (55 °C).
RESUMO
While numerous oxygen electrocatalysts have been reported to enhance zinc-air battery (ZAB) performance, highly efficient electrocatalysts for the oxygen electrocatalysis need to be developed for broader commercialization of ZABs. Furthermore, areal (instead of volumetric) power density has been used to benchmark the performance of ZABs, often causing ambiguities or confusions. Here, we propose a methodology for evaluating the performance of a ZAB using the volumetric (rather than the areal) power density by taking into consideration the air electrode thickness. A nitrogen and sulfur co-doped metal-free oxygen reduction electrocatalyst (N-S-PC) is used as a model catalyst for this new metric. The electrocatalyst exhibited a half-wave potential of 0.88 V, which is similar to that of the Pt/C electrocatalyst (0.89 V) due to the effects of co-doping and a highly mesoporous structure. In addition, the use of volumetric activity allows fair comparison among different types of air electrodes. The N-S-PC-loaded air electrode demonstrated a higher peak power density (5 W cm-3) than the carbon felt or paper electrode in the ZAB test under the same testing conditions.
RESUMO
Conventional nickel-rich cathode materials suffer from reaction heterogeneity during electrochemical cycling particularly at high temperature, because of their polycrystalline properties and secondary particle morphology. Despite intensive research on the morphological evolution of polycrystalline nickel-rich materials, its practical investigation at the electrode and cell levels is still rarely discussed. Herein, an intrinsic limitation of polycrystalline nickel-rich cathode materials in high-energy full-cells is discovered under industrial electrode-fabrication conditions. Owing to their highly unstable chemo-mechanical properties, even after the first cycle, nickel-rich materials are degraded in the longitudinal direction of the high-energy electrode. This inhomogeneous degradation behavior of nickel-rich materials at the electrode level originates from the overutilization of active materials on the surface side, causing a severe non-uniform potential distribution during long-term cycling. In addition, this phenomenon continuously lowers the reversibility of lithium ions. Consequently, considering the degradation of polycrystalline nickel-rich materials, this study suggests the adoption of a robust single-crystalline LiNi0.8 Co0.1 Mn0.1 O2 as a feasible alternative, to effectively suppress the localized overutilization of active materials. Such an adoption can stabilize the electrochemical performance of high-energy lithium-ion cells, in which superior capacity retention above ≈80% after 1000 cycles at 45 °C is demonstrated.
RESUMO
Porous strategies based on nanoengineering successfully mitigate several problems related to volume expansion of alloying anodes. However, practical application of porous alloying anodes is challenging because of limitations such as calendering incompatibility, low mass loading, and excessive usage of nonactive materials, all of which cause a lower volumetric energy density in comparison with conventional graphite anodes. In particular, during calendering, porous structures in alloying-based composites easily collapse under high pressure, attenuating the porous characteristics. Herein, this work proposes a calendering-compatible macroporous architecture for a Si-graphite anode to maximize the volumetric energy density. The anode is composed of an elastic outermost carbon covering, a nonfilling porous structure, and a graphite core. Owing to the lubricative properties of the elastic carbon covering, the macroporous structure coated by the brittle Si nanolayer can withstand high pressure and maintain its porous architecture during electrode calendering. Scalable methods using mechanical agitation and chemical vapor deposition are adopted. The as-prepared composite exhibits excellent electrochemical stability of >3.6 mAh cm-2 , with mitigated electrode expansion. Furthermore, full-cell evaluation shows that the composite achieves higher energy density (932 Wh L-1 ) and higher specific energy (333 Wh kg-1 ) with stable cycling than has been reported in previous studies.
RESUMO
Silicon for anodes in lithium-ion batteries has received much attention owing to its superior specific capacity. There has been a rapid increase of research related to void engineering to address the silicon failure mechanism stemming from the massive volume change during (dis)charging in the past decade. Nevertheless, conventional synthetic methods require complex synthetic procedures and toxic reagents to form a void space, so they have an obvious limitation to reach practical application. Here, we introduce SiCx consisting of nanocrystallite Si embedded in the inactive matrix of ß-SiC to fabricate various types of void structures using thermal etching with a scalable one-pot CVD method. The structural features of SiCx make the carbonaceous template possible to be etched selectively without Si oxidation at high temperature with an air atmosphere. Furthermore, bottom-up gas phase synthesis of SiCx ensures atomically identical structural features (e.g., homogeneously distributed Si and ß-SiC) regardless of different types of sacrificial templates. For these reasons, various types of SiCx hollow structures having shells, tubes, and sheets can be synthesized by simply employing different morphologies of the carbon template. As a result, the morphological effect of different hollow structures can be deeply investigated as well as the free volume effect originating from void engineering from both a electrochemical and computational point of view. In terms of selective thermal oxidation, the SiCx hollow shell achieves a much higher initial Coulombic efficiency (>89%) than that of the Si hollow shell (65%) because of its nonoxidative property originating from structural characteristics of SiCx during thermal etching. Moreover, the findings based on the clearly observed different electrochemical features between half-cell and full-cell configuration give insight into further Si anode research.
RESUMO
Silicon is considered a most promising anode material for overcoming the theoretical capacity limit of carbonaceous anodes. The use of nanomethods has led to significant progress being made with Si anodes to address the severe volume change during (de)lithiation. However, less progress has been made in the practical application of Si anodes in commercial lithium-ion batteries (LIBs). The drastic increase in the energy demands of diverse industries has led to the co-utilization of Si and graphite resurfacing as a commercially viable method for realizing high energy. Herein, we highlight the necessity for the co-utilization of graphite and Si for commercialization and discuss the development of graphite/Si anodes. Representative Si anodes used in graphite-blended electrodes are covered and a variety of strategies for building graphite/Si composites are organized according to their synthetic methods. The criteria for the co-utilization of graphite and Si are systematically presented. Finally, we provide suggestions for the commercialization of graphite/Si combinations.
RESUMO
The use of high-capacity anode materials to overcome the energy density limits imposed by the utilization of low-theoretical-capacity conventional graphite has recently drawn increased attention. Until now, stress management (including strategies relying on size, surface coating, and free volume control) has been achieved by addressing the critical problems originating from significant anode volume expansion upon lithiation. However, commercially viable alternatives to graphite have not yet been found. A new stress-management strategy relying on the use of a lamellar nanosphere Si anode is proposed. Specifically, nanospheres comprising ≈50 nm Si nanoparticles encapsulated by SiOx /Si/SiOx /C layers with thicknesses of <20 nm per layer are synthesized via one-pot chemical vapor deposition in various atmospheres. SiOx is found to act as a stress management interlayer when it is located between Si and mitigates stress intensification on the surface layer, allowing nanospheres to maintain their morphological integrity and promoting the formation of a stable solid electrolyte interphase layer during cycling. When tested using an industrial protocol, a full cell comprising a nanosphere/graphite blended anode and a lithium cobalt oxide cathode achieve an average energy density of 2440.2 Wh L-1 (1.72 times higher than that of conventional graphite) with a capacity retention ratio of 80% after 101 cycles.
RESUMO
To achieve the urgent requirement for high volumetric energy density in lithium-ion batteries, alloy-based anodes have been spotlighted as next-generation alternatives. Nonetheless, for the veritable accomplishment with regards to high-energy demand, alloy-based anodes must be evaluated considering several crucial factors that determine volumetric capacity. In particular, the electrode swelling upon cycling must be contemplated if these anodes are to replace conventional graphite anodes in terms of volumetric capacity. Herein, we propose macropore-coordinated graphite-silicon composite by incorporating simulation and mathematical calculation of numerical values from experimental data. This unique structure exhibits minimized electrode swelling comparable to conventional graphite under industrial electrode fabrication conditions. Consequently, this hybrid anode, even with high specific capacity (527 mAh g-1) and initial coulombic efficiency (93%) in half-cell, achieves higher volumetric capacity (493.9 mAh cm-3) and energy density (1825.7 Wh L-1) than conventional graphite (361.4 mAh cm-3 and 1376.3 Wh L-1) after 100 cycles in the full-cell configuration.