Development of science and policy related to acid deposition in East Asia over 30 years.

Scientific and public interest in acid deposition and its ecological impacts have increased throughout 1990s in East Asia (Northeast and Southeast Asia). After being established in 2001, the Acid Deposition Monitoring Network in East Asia (EANET) celebrates the 20th anniversary in 2021, and is now being expanded in scope reflecting the shifting social concern from acid deposition to broader air quality and climate change in recent years. This paper reviews the past 30 years of development of scientific research and policy related to acid deposition in East Asia. Since the onset of the twenty-first century, East Asia has had the highest SO2 and NOx emissions in the world by continents, with substantial economic developmental inequality among countries. An overview of studies on sulfur and nitrogen deposition, the acidification of inland water and forest soil, and forest decline reveal that although limited acidification of inland water and forest soils have been documented, no decline in the populations of fish and other aquatic biota has been reported in East Asia. After a review of policy-oriented modeling studies on source receptor relationships and the critical loads of sulfur and nitrogen in East Asia, the history of EANET and its success and challenges are discussed. Finally, the importance of epistemic communities as the interface between science and policy in the region is discussed. Regional governance and cooperation are essential for reducing the emission of greenhouse gases, especially short-lived climate pollutants and atmospheric pollutants to realize the co-benefits of global climate change mitigation and improved air quality.

Newly Designed Mesoporous Silica and Organosilica Nanostructures Based on Pentablock Copolymer Templates in Weakly Acidic Media.

We developed a new category of porous silica and organosilicas nanostructures in a facile method based on weakly acidic aqueous-ethanol media by utilizing two different pentablock copolymer templates of type PLGA-PEO-PPO-PEO-PLGA. Pluronic block templates were used mainly to prepare these pentablock copolymers with different molecular weights and volume ratios. Silica precursor tetraethyl orthosilicate and organosilicas precursor 1,4-bis(triethoxysilyl)benzene have been used as main source for synthesizing the silica and organosilicas samples. Weak Lewis acids iron(III) chloride hexahydrate, aluminum(III) chloride hexahydrate, and boric acid were utilized as catalyst instead of any strong inorganic acids and the molar ratio of catalyst/precursor has been optimized to 1-2 for preparation of ordered mesostructures. Reaction temperatures have been optimized to 25 °C for pure silica and both 25 °C as well as 40 °C for organosilicas to get the best result for mesostructures. A detailed analysis by using various analytical techniques like synchrotron small angle X-ray scattering, nitrogen sorption, transmission electron microscopy, scanning electron microscope, solid-state 29Si CP-MAS nuclear magnetic resonance (NMR), and so on has revealed well developed mesostructures with surface area of 388-836 m2/g for silica and 210-691 m2/g for organosilica samples, respectively. Furthermore, bimodal typepores have been observed from pore size distribution plot of the samples. Thermal stability of the materials was up to 400 °C as analyzed by thermogravimetric analysis.

Effects of Water Removal Devices on Ambient Inorganic Air Pollutant Measurements.

Water vapor is a pivotal obstacle when measuring ambient air pollutants. The effects of water vapor removal devices which are called KPASS (Key-compound PASSer) and Cooler. On the measurement of O3, SO2, and CO at ambient levels were investigated. Concentrations of O3, SO2, and CO were 100 ppb, 150 ppb, and 25 ppm, respectively. The amount of water vapor varied at different relative humidity levels of 30%, 50%, and 80% when the temperature was 25 °C and the pressure was 1 atm. Water vapor removal efficiencies and recovery rates of target gases were also determined. The KPASS showed a better performance than the Cooler device, removing 93.6% of water vapor and the Cooler removing 59.2%. In terms of recovery, the KPASS showed a better recovery of target gases than the Cooler. Consequently, it is suggested that the KPASS should be an alternative way to remove water vapor when measuring O3, SO2, and CO.

Field-scale electrolysis/ceramic membrane system for the treatment of sewage from decentralized small communities.

The electrolysis process adopting copper electrodes and ceramic membrane with pore sizes of 0.1-0.2 µm were consisted to a system for the treatment of sewage from decentralized small communities. The system was operated under an HRT of 0.1 hour, voltage of 24 V, and TMP of 0.05 MPa. The system showed average removals of organics, nitrogen, phosphorus, and solids of up to 80%, 52%, 92%, and 100%, respectively. Removal of organics and nitrogen dramatically increased in proportion to increment of influent loading. Phosphorus and solids were remarkably eliminated by both electro-coagulation and membrane filtration. The residual particulate constituents could also be removed successfully through membrane process. A system composed of electrolysis process with ceramic membrane would be a compact, reliable, and flexible option for the treatment of sewage from decentralized small communities.

Integrated nitrogen removal biofilter system with ceramic membrane for advanced post-treatment of municipal wastewater.

The pre-denitrification biofilm process for nitrogen removal was combined with ceramic membrane with pore sizes of 0.05-0.1 µm as a system for advanced post-treatment of municipal wastewater. The system was operated under an empty bed hydraulic retention time of 7.8 h, recirculation ratio of 3, and transmembrane pressure of 0.47 bar. The system showed average removals of organics, total nitrogen, and solids as high as 93%, 80%, and 100%, respectively. Rapid nitrification could be achieved and denitrification was performed in the anoxic filter without external carbon supplements. The residual particulate organics and nitrogen in effluent from biofilm process could be also removed successfully through membrane filtration and the removal of total coliform was noticeably improved after membrane filtration. Thus, a system composed of the pre-denitrification biofilm process with ceramic membrane would be a compact and flexible option for advanced post-treatment of municipal wastewater.

Volatile organic compounds (VOCs) in surface coating materials: Their compositions and potential as an alternative fuel.

A sampling system was designed to determine the composition ratios of VOCs emitted from 31 surface coating materials (SCMs). Representative architectural, automotive, and marine SCMs in Korea were investigated. Toluene, ethylbenzene, and xylene were the predominant VOCs. The VOC levels (wt%) from automotive SCMs were significantly higher than those from architectural and marine paints. It was found that target SCMs comprised mainly VOCs with 6-10 carbon atoms in molecules, which could be adsorbed by activated carbon. The saturated activated carbon which had already adsorbed toluene, ethylbenzene, and m-xylene was combusted. The saturated activated carbon was more combustible than new activated carbon because it comprised inflammable VOCs. Therefore, it could be an alternative fuel when using in a "fuelization system". To use the activated carbon as a fuel, a control technology of VOCs from a coating process was also designed and introduced.

Emission characteristics of VOCs emitted from consumer and commercial products and their ozone formation potential.

The characteristics of volatile organic compounds (VOCs) emitted from several consumer and commercial products (body wash, dishwashing detergent, air freshener, windshield washer fluid, lubricant, hair spray, and insecticide) were studied and compared. The spray products were found to emit the highest amount of VOCs (~96 wt%). In contrast, the body wash products showed the lowest VOC contents (~1.6 wt%). In the spray products, 21.6-96.4 % of the VOCs were propane, iso-butane, and n-butane, which are the components of liquefied petroleum gas. Monoterpene (C10H16) was the dominant component of the VOCs in the non-spray products (e.g., body wash, 53-88 %). In particular, methanol was present with the highest amount of VOCs in windshield washer fluid products. In terms of the number of carbon, the windshield washer fluids, lubricants, insecticides, and hair sprays comprised >95 % of the VOCs in the range C2-C5. The VOCs in the range C6-C10 were predominantly found in the body wash products. The dishwashing detergents and air fresheners contained diverse VOCs from C2 to C11. Besides comprising hazardous VOCs, VOCs from consumer products were also ozone precursors. The ozone formation potential of the consumer and commercial spray products was estimated to be higher than those of liquid and gel materials. In particular, the hair sprays showed the highest ozone formation potential.

Iron speciation of airborne subway particles by the combined use of energy dispersive electron probe X-ray microanalysis and Raman microspectrometry.

Quantitative energy-dispersive electron probe X-ray microanalysis (ED-EPMA), known as low-Z particle EPMA, and Raman microspectrometry (RMS) were applied in combination for an analysis of the iron species in airborne PM10 particles collected in underground subway tunnels. Iron species have been reported to be a major chemical species in underground subway particles generated mainly from mechanical wear and friction processes. In particular, iron-containing particles in subway tunnels are expected to be generated with minimal outdoor influence on the particle composition. Because iron-containing particles have different toxicity and magnetic properties depending on their oxidation states, it is important to determine the iron species of underground subway particles in the context of both indoor public health and control measures. A recently developed analytical methodology, i.e., the combined use of low-Z particle EPMA and RMS, was used to identify the chemical species of the same individual subway particles on a single particle basis, and the bulk iron compositions of airborne subway particles were also analyzed by X-ray diffraction. The majority of airborne subway particles collected in the underground tunnels were found to be magnetite, hematite, and iron metal. All the particles collected in the tunnels of underground subway stations were attracted to permanent magnets due mainly to the almost ubiquitous ferrimagnetic magnetite, indicating that airborne subway particles can be removed using magnets as a control measure.

Sulfur deposition simulations over China, Japan, and Korea: a model intercomparison study for abating sulfur emission.

In response to increasing trends in sulfur deposition in Northeast Asia, three countries in the region (China, Japan, and Korea) agreed to devise abatement strategies. The concepts of critical loads and source-receptor (S-R) relationships provide guidance for formulating such strategies. Based on the Long-range Transboundary Air Pollutants in Northeast Asia (LTP) project, this study analyzes sulfur deposition data in order to optimize acidic loads over the three countries. The three groups involved in this study carried out a full year (2002) of sulfur deposition modeling over the geographic region spanning the three countries, using three air quality models: MM5-CMAQ, MM5-RAQM, and RAMS-CADM, employed by Chinese, Japanese, and Korean modeling groups, respectively. Each model employed its own meteorological numerical model and model parameters. Only the emission rates for SO(2) and NO(x) obtained from the LTP project were the common parameter used in the three models. Three models revealed some bias from dry to wet deposition, particularly the latter because of the bias in annual precipitation. This finding points to the need for further sensitivity tests of the wet removal rates in association with underlying cloud-precipitation physics and parameterizations. Despite this bias, the annual total (dry plus wet) sulfur deposition predicted by the models were surprisingly very similar. The ensemble average annual total deposition was 7,203.6 ± 370 kt S with a minimal mean fractional error (MFE) of 8.95 ± 5.24 % and a pattern correlation (PC) of 0.89-0.93 between the models. This exercise revealed that despite rather poor error scores in comparison with observations, these consistent total deposition values across the three models, based on LTP group's input data assumptions, suggest a plausible S-R relationship that can be applied to the next task of designing cost-effective emission abatement strategies.

Relationships of mental disorders and weight status in the Korean adult population.

The purpose of this study was to evaluate the associations between weight status and mental disorders, including depressive disorder, anxiety disorder and alcohol use disorder. A total of nationally representative 6,510 subjects aged 18-64 yr was interviewed in face-to-face household survey. Response rate was 81.7%. Mental disorders were diagnosed using the Korean version of the Composite International Diagnostic Interview (K-CIDI). The subjects reported their heights and weights. After adjusting for age and gender, the lifetime diagnosis of depressive disorder had a significant association with only the underweight group (odds ratio [OR], 1.68, 95% confidence interval [CI], 1.19-2.38). The association between underweight and depressive disorder was the strongest for subjects with a high education level (OR, 1.75, 95% CI, 1.2-2.56), subjects with a married/cohabiting status (OR, 1.94, 95% CI, 1.17-3.22) and smokers (OR, 2.58, 95% CI, 1.33-4.98). There was no significant association between obesity and depressive disorder in Korea. But there was a significant association between the underweight group and depressive disorder. The relationship between obesity and mental disorder in a Korean population was different from that in a Western population. These results suggest that the differences of traditional cultures and races might have an important effect on the associations between the weight status and mental disorders.

Psychiatric disorder in two siblings with hallervorden-spatz disease.

Hallervorden-Spatz disease (HSD) is a rare autosomal-recessive hereditary disorder characterized by the early onset of progressive movement alterations, including dystonia, rigidity, choreoathetosis, and mental deterioration. HSD is also associated with a variety of psychiatric symptoms, primarily depression and mental deterioration. However, psychosis has rarely been reported as a major symptom of HSD. We report two siblings who presented psychiatric symptoms as major clinical presentations, accompanied by ataxic and spastic gait, dysarthria, and typical neuroimaging findings of HSD. A 14-year-old girl presented complex motor tics, stereotypic behavior and anxiety symptoms. Her older brother, a 16-year-old boy, presented prominent auditory hallucinations, persecutory delusions and social withdrawal symptoms. Psychiatric symptoms were improved after atypical antipsychotic treatment. HSD is a rare disease but should be carefully considered in the diagnosis of patients with both motor disorder and various psychiatric symptoms.

Comparative Analysis of Cognitive Function in Schizophrenia with and without Obsessive Compulsive Disorder.

OBJECTIVE: We investigated the neurocognitive deficits in schizophrenic patients with and without obsessive-compulsive disorder (OCD). METHODS: We grouped 27 patients as either obsessive-compulsive or non-obsessive-compulsive based on the presence of OCD. The two groups completed the Yale-Brown Obsessive-Compulsive Scale (Y-BOCS), Positive and Negative Symptom Scale (PANSS), and Hamilton Depression Scale. The intelligence quotient (IQ) was tested using the Korean Wechsler Adult Intelligence Scale. The memory quotient (MQ) was tested using the Korean-Auditory Verbal Learning and Korean-Complex Figure Test. The executive intelligence quotient (EIQ) was determined using the Kims executive intelligence test (EXIT). RESULTS: Ten of the 27 patients had OCD. The compulsion score of Y-BOCS was positively correlated with positive symptoms, negative symptoms, and the total scores of PANSS. The OCD-schizophrenia patients had higher IQs. No difference was found in MQ. Although the EIQ did not differ between the two groups, the OCD-schizophrenia patients performed better at the Stroop-interference and verbal fluency tests, which was highly dependent on executive function. CONCLUSION: Our findings suggest that OCD may have a protective effect on some cognitive function, at least in relatively early stage of illness. Moreover, based on clinical, neurocognitive features, schizophrenia with OCD could be considered as a distinct subtype of schizophrenia.

Seasonal variations of monoterpene emissions from Pinus densiflora in East Asia.

The emission rates and compositions of monoterpene from Pinus densiflora were investigated in the Gumsung (GM) and Worak (WM) mountains. The standard emission rates (ERs: ERs is the monoterpene emission rate at standard temperature, 30 degrees C) from P. densiflora ranged from 0.817 to 1.704 (microgC/gdw-h). The ERs and beta-values of total monoterpene were measured at the two study sites (GM and WM). In the spring and summer, the ERs were the highest, while relatively low values (<0.058microgC/gdw-h) were measured in the autumn and winter. In GM and WM sites the beta-value obtained for the different seasons ranged from 0.047 to 0.179, with an average of 0.09. The major monoterpene compounds from P. densiflora were alpha-pinene, myrcene, beta-phellandrene, d-limonene and alpha-terpinene. The fractional compositions of individual monoterpene compounds were significantly different between the two test sites in the summer and winter. The ERs of the older group (31-40 years) were higher than those in the younger group (21-30 years). However, the monoterpene compositions were similar between the two age groups.

Investigation of carbonyl compounds in air from various industrial emission sources.

The emission concentrations of carbonyl compounds in air were quantified from a total of 195 man-made source units within 77 individual companies at a large industrial complex in Korea. The measurement data were evaluated both by absolute magnitude of concentration and by their relative contribution to malodor formation such as malodor degree (MD) derived from empirical formula. It was found that formaldehyde exhibited the highest mean concentration of 323ppb with a median value of 28.2ppb, while butyraldehyde recorded the highest contribution to odor formation with an MD value of 3.5 (186 (mean) and 9.8ppb (median)). The relative intensity of carbonyl emission, when compared by the sum of MD, showed the highest source strength from the food and beverage (industry sector) and scrubber (source unit). A comprehensive evaluation of the carbonyl data from diverse industrial facilities thus allowed us to describe the fundamental patterns of their emission.

Major aromatic VOC in the ambient air in the proximity of an urban landfill facility.

In this study, the environmental behavior of major aromatic VOC (including benzene, toluene, ethylbenzene and xylene, commonly called BTEX) in the ambient air was investigated from a mid-size municipal landfill site located in Dae Gu city, Korea in the winter of 2004. A series of field campaigns were conducted in the course of the study to cover eight different locations within and near this landfill site along with a number of VOC vent systems. The mean concentrations of different VOC species in ambient air fell in a comparable range of at or above a few ppb (e.g., the most abundant toluene approximately 10 ppb). An inspection of the VOC data sets at the studied LF sites also indicated that they are quite analogous to those typically found in other urban areas in terms of their absolute magnitude and relative pattern (e.g., the general dominance of toluene over the other species). In light of the fact that there is active ventilation of landfill gas (LFG: e.g., with their LFG concentrations above a few to a few tens of ppm) in the study area with no other distinct source processes, it can be concluded that the effects of the landfill processes may be as important as other point sources in maintaining VOC concentration levels in certain urban areas.

The emissions of major aromatic VOC as landfill gas from urban landfill sites in Korea.

In this study, concentrations of major aromatic VOCs were determined from landfill gas (LFG) at a total of five municipal landfill sites in Korea including Nan Ji (NJ), Woon Jung (WJ), Sam Poong (SP), Hoei Chun (HC), and No Hyung (NH). The concentration levels of those VOC were found to be significantly different, mainly as a function of such a parameter as landfill aging. The VOC concentrations measured from the unclosed landfill sites (e.g., WJ) were characterized by exceedingly high values above a few tens of ppm. However, the results of the abandoned site (e.g., SP) were about three orders of magnitude lower than the others so as to merely exceed the typical ambient concentration levels. It was most striking to find a systematic dominance of toluene over other aromatic VOC under most circumstances. The LFG flux values of all aromatic VOC and the four specific major ones (termed as BTEX: benzene, toluene, ethylbenzene, and xylene) were also computed for each vent pipe from all study sites using their concentrations and the concurrently determined environmental parameters. The results, if calculated in terms of the average BTEX quantity emitted per vent pipe, showed that the magnitude of their emissions can vary substantially, with the values ranging from 0.05 (SP) to 49.2 kg yr(-1) (WJ in wintertime). The LFG flux values of aromatic VOC, when compared to the contribution of non-methane hydrocarbons (NMHC), were able to explain a constant, but minor, proportion of the LFG carbon budget.

Atmospheric concentrations of PM2.5 trace elements in the Seoul urban area of South Korea.

Fine particles (PM2.5) were collected during all four seasons, from April 2001 to February 2002, in Seoul, South Korea, using an annular denuder system. Elemental compositions of ambient PM2.5 were analyzed using the proton-induced X-ray emission method. The greatest contributors (> or = 2%) to the PM2.5 mass were sulfur (S), silicon (Si), chlorine (Cl), aluminum (Al), and iron (Fe) in the spring; S in the summer; and S and Cl in the fall. S, Cl, and Si were the major elements in the winter. S was the most abundant species among the elements, ranging from 5.3 to 7.9%, followed by Si and Cl. From analysis of variance, PM2.5 mass, Al, Si, potassium, calcium, and Fe showed significant seasonal differences during the four seasons (p < 0.001). Enrichment factor (EF) analysis was carried out to identify the sources affecting the aerosol in the Seoul area. On the basis of the mean EF values, elemental S, copper, zinc, and lead may be emitted from anthropogenic sources (EF > 50). Elemental Al, Si, titanium, and Fe may be emitted from crustal sources (EF < 3). Additionally, a correlation analysis was carried out for source identification. The results of the correlation analysis were confirmed by the results of the EF analysis.

Concentration characteristics of atmospheric PCBs for urban and rural area, Korea.

Mean concentrations of total PCBs (gas+particle) detected in urban and rural atmospheres were 130.41+/-62.57 pg/m(3) and 39.65+/-34.04 pg/m(3), respectively. The concentration distribution of PCB homologs in the urban and rural area decreased with increasing Cl substitutions and showed significant correlation coefficients (P>0.05) with the octanol-air partition coefficient (K(OA)) and vapor pressure, respectively. The fractions (%) of total PCBs were 28% for tri-CBs, 25% for tetra-CBs and 24% for penta-CBs in urban air and 45% for tri-CBs, 24% for tetra-CBs, and 21% for penta-CBs in rural air. The sum of those homologs was 77% for urban and 90% for rural air. Therefore, these homologs were identified as the main components of PCB homologs compared to other homologs (>penta-CBs). The Clausius-Clapeyron (CC) plot was applied to atmospheric PCB data, relating PCB partial vapor pressure (logarithm P) to inverse absolute temperature (1/T). The slopes obtained from Clausius-Clapeyron plots were -3888 (R(2)=0.75, P<0.0001) for urban and -1902 (R(2)=0.22, P<0.1) for rural air. The slope for urban air was approximately two times higher than that of rural air, possibly because the atmospheric concentration of lower molecular weight congeners in urban air may be predominantly influenced by local sources relative to rural air.