Cellulose hydrolysis and binding with Trichoderma reesei Cel5A and Cel7A and their core domains in ionic liquid solutions.

Ionic liquids (ILs) dissolve lignocellulosic biomass and have a high potential as pretreatment prior to total enzymatic hydrolysis. ILs are, however, known to inactivate cellulases. In this article, enzymatic hydrolysis of microcrystalline cellulose (MCC) and enzyme binding onto the cellulosic substrate were studied in the presence of cellulose-dissolving ILs. Two different ILs, 1,3-dimethylimidazolium dimethylphosphate ([DMIM]DMP) and 1-ethyl-3-methylimidazolium acetate ([EMIM]AcO), and two monocomponent cellulases, Trichoderma reesei cellobiohydrolase Cel7A and endoglucanase Cel5A, were used in the study. The role and IL sensitivity of the carbohydrate-binding module (CBM) were studied by performing hydrolysis and binding experiments with both the intact cellulases, and their respective core domains (CDs). Based on hydrolysis yields and substrate binding experiments for the intact enzymes and their CDs in the presence of ILs, the function of the CBM appeared to be very IL sensitive. Binding data suggested that the CBM was more important for the substrate binding of endoglucanase Cel5A than for the binding of cellobiohydrolase Cel7A. The CD of Cel7A was able to bind well to cellulose even without a CBM, whereas Cel5A CD had very low binding affinity. Hydrolysis also occurred with Cel5A CD even if this protein had very low binding affinity in all the studied matrices. Binding and hydrolysis were less affected by the studied ILs for Cel7A than for Cel5A. To our knowledge, this is the first systematic study of IL effects on cellulase substrate binding.

Analysis of mono- and oligosaccharides in ionic liquid containing matrices.

Ionic liquids (ILs), that is, salts with melting points <100°C, have recently attracted a lot of attention in biomass processing due to their ability to dissolve lignocellulosics. In this work, we studied how two imidazolium-based, hydrophilic, cellulose dissolving ionic liquids 1,3-dimethylimidazolium dimethylphosphate [DMIM]DMP and 1-ethyl-3-methylimidazolium acetate [EMIM]AcO affect the usually employed analytical methods for mono- and oligosaccharides, typical products from hydrolytic treatments of biomass. HPLC methods were severely hampered by the presence of ILs with loss of separation power and severe baseline problems, making their use for saccharide quantification extremely challenging. Problems in DNS photometric assay and chromatography were also encountered at high ionic liquid concentrations and many capillary electrophoresis (CE) methods did not allow an efficient analysis of saccharides in these matrices. In this paper we describe an optimized CE method with pre-column derivatization for the qualitative and quantitative analysis of mono- and oligosaccharides in sample matrices containing moderate (20-40% (v/v)) concentrations of ILs. The IL content and type in the sample matrix was found to affect both peak shape and quantification parameters. Generally, the presence of high IL concentrations (≥20% (v/v)) had a dampening effect on the detection of the analytes. IL in lower concentrations of <20% (v/v) was, however, found to improve peak shape and/or separation in some cases. The optimized CE method has good sensitivity in moderate concentrations of the ionic liquids used, with limits of detection of 5mg/L for cellooligomers up to the size of cellotetraose and 5-20mg/L for cellopentaose and cellohexaose, depending on the matrix. The method was used for analysing the action of a commercial ß-glucosidase in ILs and for analysing saccharides in the IL containing hydrolysates from the hydrolysis of microcrystalline cellulose with Trichoderma reesei endoglucanase Cel5A. According to the results, [DMIM]DMP and [EMIM]AcO] showed clear differences in enzyme inactivation.

Enzyme-aided alkaline extraction of oligosaccharides and polymeric xylan from hardwood kraft pulp.

In this paper we describe the effect of enzyme treatments on the production of polymeric xylan, oligosaccharides and hemicellulose lean pulp by alkaline extraction of bleached hardwood kraft pulp. Enzyme treatments were carried out before one or in between two subsequent alkaline extractions by purified Trichoderma reesei xylanase and endoglucanase II (Cel 5a) as well as by a commercial monocomponent endoglucanase (FibreCareR). Without enzyme pre-treatment 61% and 7% of the pulp xylan was extracted in high purity in the first and second alkaline stage, respectively. Higher molecular mass xylan was obtained in the second than in the first alkaline extraction. Xylanase treatment before alkaline extraction hydrolyzed up to 12% of xylan to xylooligosaccharides. According to our results, preparation of polymeric xylan, and/or oligosaccharides as well as hemicellulose lean pulp with cellulose content of 93-94%, is possible by enzyme-aided alkaline extraction process.

Reactivity of bacterial and fungal laccases with lignin under alkaline conditions.

The ability of Streptomyces ipomoea laccase to polymerize secoisolariciresinol lignan and technical lignins was assessed. The reactivity of S. ipomoea laccase was also compared to that of low redox fungal laccase from Melanocarpus albomyces using low molecular mass p-coumaric, ferulic and sinapic acid as well as natural (acetosyringone) and synthetic 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) mediators as substrates. Oxygen consumption measurement, MALDI-TOF MS and SEC were used to follow the enzymatic reactions at pH 7, 8, 9 and 10 at 30°C and 50°C. Polymerization of lignins and lignan by S. ipomoea laccase under alkaline reaction conditions was observed, and was enhanced in the presence of acetosyringone almost to the level obtained with M. albomyces laccase without mediator. Reactivities of the enzymes towards acetosyringone and TEMPO were similar, suggesting exploitation of the compounds and low redox laccase in lignin valorization under alkaline conditions. The results have scientific impact on basic research of laccases.

Polymerization of guaiacol and a phenolic beta-O-4-substructure by Trametes hirsuta laccase in the presence of ABTS.

The reaction of the monomeric lignin model compound guaiacol and the beta-O-4-type dimer erol (1-(4-hydroxy-3-methoxyphenyl)-2(2-methoxyphenoxy)-propane-1,3-diol with laccase from Trametes hirsuta was studied in the presence of the mediator ABTS (2,2'-azino-di[3ethylbenzothiazoline-6-sulfonic acid]). The product mixtures were analyzed by means of aqueous-phase size exclusion chromatography (SEC) with 50 mM NaOH as eluent. Interestingly, in the laccase-catalyzed reaction with both substrates, the mediator not only functioned as an electron carrier but underwent coupling reactions with the substrate to give polymeric coupling products. The molecular weight of these copolymeric products was significantly higher than the molecular weight of products obtained without ABTS. After ultrafiltration, 33% and 21% of the initially applied ABTS could be found in the polymeric product fraction for the substrates guaiacol and erol, respectively, on the basis of nitrogen analysis. When ABTS was added to substrates after full laccase-catalyzed polymerization, the reaction proceeded toward higher molecular weights.