Enhancement of Aggregate Formation Through Aromatic Compound Adsorption in Elastin-like Peptide (FPGVG)5 Analogs.

Elastin-like peptides (ELPs) exhibit temperature-dependent reversible self-assembly. Repetitive sequences derived from elastin, such as Val-Pro-Gly-Val-Gly (VPGVG), are essential for the self-assembly of ELPs. Previously, we developed (FPGVG)5 (F5), in which the first valine residue in the VPGVG sequence was replaced with phenylalanine, which showed strong self-aggregation ability. This suggests that interactions through the aromatic amino acid residues of ELPs could play an important role in self-assembly. In this study, we investigated the thermoresponsive behavior of F5 analogs in the presence of aromatic compounds. Turbidimetry, spectroscopy, and fluorescence measurements demonstrated that aromatic compounds interacted with F5 analogs below the transition temperature and enhanced the self-assembly ability of ELPs by stabilizing amyloid-like structures. Furthermore, quantitative high-performance liquid chromatography analyses showed that the F5 analogs could adsorb and remove hydrophobic aromatic compounds from aqueous solutions during aggregate formation. These results suggested that the F5 analogs can be applicable as scavengers of aromatic compounds.

Determining the Sequence Dependency of Self-Assembly of Elastin-Like Peptides Using Short Peptide Analogues with Shuffled Repetitive Sequences.

Synthetic elastin-like peptides (ELPs) that possess characteristic tropoelastin-derived hydrophobic repetitive sequences, such as (VPGVG)n, exhibit thermoresponsive reversible self-assembly. Although their thermoresponsive properties have been well-studied, the sequence-dependent and structural requirements for self-assembly remain ambiguous. In particular, it is still unclear whether the amino acid sequences derived from tropoelastin are necessary for self-assembly. In this study, 11 sequence-shuffled ELP analogues based on (FPGVG)5, which is a previously developed short ELP (sELP), were designed to elucidate the sequence-dependent and structural requirements for their self-assembly. Among them, eight shuffled peptides exhibited self-assembling properties, whereas the other three peptides were difficult to dissolve in water. Structural analyses revealed that the structural characteristics of the three insoluble peptides were different from those of their thermoresponsive analogues. Furthermore, the secondary structures of the peptide analogues possessing the self-assembly abilities were different from each other. These results suggest that the potential for self-assembly and water solubility of sELPs depend on the primary structure in each repeated unit. Moreover, several shuffled analogues exhibited more potent self-assembling properties than the original (FPGVG)5, indicating that shorter ELPs can be obtained using their novel motifs as repetitive units. We also observed that the presence of Pro-Gly sequence in the repeating units was advantageous in terms of peptide solubility. Although further analysis will be necessary to elucidate the molecular mechanism underlying the self-assembly of these sELPs, this study provides insights into the relationship between the amino acid sequence and the self-assembling ability of the peptides for developing new sELPs for various applications.

Development of the efficient preparation method for thermoresponsive elastin-like peptides using liquid-phase synthesis combined with fragment condensation strategy.

Elastin-like peptides (ELPs) are synthetic peptides that mimic the characteristic hydrophobic amino acid repeat sequences of elastin and exhibit temperature-dependent reversible self-assembly properties. ELPs are expected to be used as temperature-responsive biomolecular materials across diverse industrial and research fields, and there is a requirement for a straightforward method to mass-produce them. Previously, we demonstrated that phenylalanine-containing ELP analogs, namely, (FPGVG)n , can undergo coacervation with short chains (n = 5). The Fmoc solid-phase peptide synthesis method is one strategy used to synthesize these short ELPs. However, owing to its low reaction efficiency, an efficient method for preparing ELPs is required. In this study, efficient preparation of ELPs was investigated using a liquid-phase synthesis method with a hydrophobic benzyl alcohol support (HBA-tag). Because HBA-tags are highly hydrophobic, they can be easily precipitated by the addition of poor solvents and recovered by filtration. This property allows the method to combine the advantages of the simplicity of solid-phase methods and the high reaction efficiency of liquid-phase methods. By utilizing liquid-phase fragment condensation with HBA-tags, short ELPs were successfully obtained in high yield and purity. Finally, the temperature-dependent response of the ELPs generated through fragment condensation was assessed using turbidity measurements, which revealed a reversible phase transition. Consequently, the ELPs exhibited a reversible phase transition, indicating successful synthesis of ELPs via fragment preparation with tags. These findings provide evidence of the potential for mass production of ELPs using this approach.

High cytotoxicity of a degraded TBBPA, dibromobisphenol A, through apoptotic and necrosis pathways.

Halogenated flame retardants comprising bisphenol A (BPA) derivatives, such as tetrabromobisphenol A (TBBPA), have been studied their adverse effects on human health. However, despite the fact that these halogenated BPAs are easily degraded in the environment, the risks to living organisms due to these degraded products have mostly been overlooked. To evaluate the potential toxicity of degraded TBBPAs and related compounds, we examined the cytotoxicity of halogenated bisphenol A derivatives possessing one to four halogen atoms in vitro. The results indicated that the degraded TBBPA derivatives exhibited strong cytotoxicity against HeLa cells than TBBPA. Interestingly, the di-halogenated BPA derivatives possessing two halogen atoms exhibited the strongest cytotoxicity among tested compounds. In addition, a lactate dehydrogenase release assay, fluorescence spectroscopy and flow cytometry results indicated that dibromo-BPA and diiodo-BPA induced both apoptotic and necrotic cell death by damaging the cell membranes of HeLa cells. Moreover, Escherichia coli growth was inhibited in the presence of dehalogenated TBBPA and related compounds. These findings suggest that halogenated BPA derivatives that leak from various flame-retardant-containing products require strict monitoring, as not only TBBPA but also its degraded products in environment can exert adverse effects to human health.

Branched short elastin-like peptides with temperature responsiveness obtained by EDTA-mediated multimerization.

Elastin-like peptides (ELPs) exhibit a reversible phase transition, known as coacervation, triggered by temperature changes. This property makes them useful as stimuli-responsive molecular materials for various applications. Among ELPs, short peptide chain lengths have some advantages over long peptide chain lengths because short ELPs can be easily obtained by chemical synthesis, allowing the use of various amino acids, including D-type and unnatural amino acids, at any position in the sequence. Moreover, the incorporated amino acids readily affect the temperature-responsive behavior of ELPs. However, to be utilized in various applications, it is necessary to develop short ELPs and to investigate their temperature-responsive properties. To obtain further insights into the temperature-responsive behavior of the short ELPs, we investigated branched short ELP analogs composed of (FPGVG)n chains (n = 1 or 2, abbreviated as F1 and F2, respectively). We synthesized multimers composed of four F1 chains or two to four F2 chains using ethylenediaminetetraacetic acid (EDTA) as a central component of multimerization. Our results show that the multimers obtained exhibited coacervation in aqueous solutions whereas linear F1 or F2 did not. Furthermore, the structural features of the obtained multimers were the same as those of linear (FPGVG)4 . In this study, we demonstrated that molecules capable of coacervation can be obtained by multimerization of F1 or F2. The temperature-responsive molecules obtained using short ELPs make it possible to use them as easy-to-synthesize peptide tags to confer temperature responsiveness to various molecules, which will aid the development of temperature-responsive biomaterials with a wide variety of functions.

Development of truncated elastin-like peptide analogues with improved temperature-response and self-assembling properties.

Functional peptides, which are composed of proteinogenic natural amino acids, are expected to be used as biomaterials with minimal environmental impact. Synthesizing a functional peptide with a shorter amino acid sequence while retaining its function is a easy and economical strategy. Furthermore, shortening functional peptides helps to elucidate the mechanism of their functional core region. Truncated elastin-like peptides (ELPs) are peptides consisting of repetitive sequences, derived from the elastic protein tropoelastin, that show the thermosensitive formation of coacervates. In this study, to obtain shortened ELP analogues, we synthesized several (Phe-Pro-Gly-Val-Gly)n (FPGVG)n analogues with one or two amino acid residues deleted from each repeat sequence, such as the peptide analogues consisting of FPGV and/or FPG sequences. Among the novel truncated ELP analogues, the 16-mer (FPGV)4 exhibited a stronger coacervation ability than the 25-mer (FPGVG)5. These results indicated that the coacervation ability of truncated ELPs was affected by the amino acid sequence and not by the peptide chain length. Based on this finding, we prepared Cd2+-binding sequence-conjugated ELP analogue, AADAAC-(FPGV)4, and found that it could capture Cd2+. These results indicated that the 16-mer (FPGV)4 only composed of proteinogenic amino acids could be a new biomaterial with low environmental impact.

Flexible customization of the self-assembling abilities of short elastin-like peptide Fn analogs by substituting N-terminal amino acids.

Elastin-like peptides (ELPs) are thermoresponsive biopolymers inspired by the characteristic repetitive sequences of natural elastin. As ELPs exhibit temperature-dependent reversible self-assembly, they are expected to be biocompatible thermoresponsive materials for drug delivery carriers. One of the most widely studied ELPs in this field is the repetitive pentapeptide, (VPGXG)n . We previously reported that phenylalanine-containing ELP (Fn) analogs, in which the former Val residue of the repetitive sequence (VPGVG)n is replaced by Phe, show coacervation with a short chain length (n = 5). Owing to their short sequences, Fn analogs are easily modified in amino acid sequences via simple chemical synthesis, and are useful for investigating the relationship between peptide sequences and temperature responsiveness. In this study, we developed Fn analogs by replacing Phe residue(s) with other amino acids or introducing another amino acid at the N-terminus. The temperature responsiveness of the Fn analogs changed drastically with the substitution of a single Phe residue, suggesting that aromatic amino acids play an important role in their self-assembly. In addition, the self-assembling ability of Fn was enhanced by increasing the bulkiness of the N-terminal amino acids. Therefore, the N-terminal residue was considered to be important for hydrophobicity-induced intermolecular interactions between the peptides during coacervation.

Metal ion scavenging activity of elastin-like peptide analogues containing a cadmium ion binding sequence.

The development of simple and safe methods for recovering environmental pollutants, such as heavy metals, is needed for sustainable environmental management. Short elastin-like peptide (ELP) analogues conjugated with metal chelating agents are considered to be useful as metal sequestering agents as they are readily produced, environment friendly, and the metal binding domain can be selected based on any target metal of interest. Due to the temperature dependent self-assembly of ELP, the peptide-based sequestering agents can be transformed from the solution state into the particles that chelate metal ions, which can then be collected as precipitates. In this study, we developed a peptide-based sequestering agent, AADAAC-(FPGVG)4, by introducing the metal-binding sequence AADAAC on the N-terminus of a short ELP, (FPGVG)4. In turbidity measurements, AADAAC-(FPGVG)4 revealed strong self-assembling ability in the presence of metal ions such as Cd2+ and Zn2+. The results from colorimetric analysis indicated that AADAAC-(FPGVG)4 could capture Cd2+ and Zn2+. Furthermore, AADAAC-(FPGVG)4 that bound to metal ions could be readily recycled by treatment with acidic solution without compromising its metal binding affinity. The present study indicates that the fusion of the metal-binding sequence and ELP is a useful and powerful strategy to develop cost-effective heavy metal scavenging agents with low environmental impacts.

Bisphenol A derivatives act as novel coactivator-binding inhibitors for estrogen receptor ß.

Bisphenol A and its derivatives are recognized as endocrine disruptors based on their complex effects on estrogen receptor (ER) signaling. While the effects of bisphenol derivatives on ERα have been thoroughly evaluated, how these chemicals affect ERß signaling is less well understood. Herein, we sought to identify novel ERß ligands using a radioligand competitive binding assay to screen a chemical library of bisphenol derivatives. Many of the compounds identified showed intriguing dual activities as both ERα agonists and ERß antagonists. Docking simulations of these compounds and ERß suggested that they bound not only to the canonical binding site of ERß but also to the coactivator binding site located on the surface of the receptor, suggesting that they act as coactivator-binding inhibitors (CBIs). Receptor-ligand binding experiments using WT and mutated ERß support the presence of a second ligand-interaction position at the coactivator-binding site in ERß, and direct binding experiments of ERß and a coactivator peptide confirmed that these compounds act as CBIs. Our study is the first to propose that bisphenol derivatives act as CBIs, presenting critical insight for the future development of ER signaling-based drugs and their potential to function as endocrine disruptors.

Simple Regulation of the Self-Assembling Ability by Multimerization of Elastin-Derived Peptide (FPGVG) n Using Nitrilotriacetic Acid as a Building Block.

Elastin comprises hydrophobic repetitive sequences, such as Val-Pro-Gly-Val-Gly, which are thought to be important for the temperature-dependent reversible self-association (coacervation). Elastin and elastin-like peptides (ELPs), owing to their characteristics, are expected to be applied as base materials for the development of new molecular tools, such as drug-delivery system carrier and metal-scavenging agents. Recently, several studies have been reported on the dendritic or branching ELP analogues. Although the topological difference of the branched ELPs compared to their linear counterparts may lead to useful properties in biomaterials, the available information regarding the effect of branching on molecular architecture and thermoresponsive behavior of ELPs is scarce. To obtain further insight into the thermoresponsive behavior of branched ELPs, novel ELPs, such as nitrilotriacetic acid (NTA)-(FPGVG) n conjugates, that is, (NTA)-Fn analogues possessing 1-3 (FPGVG) n (n = 3, 5) molecule(s), were synthesized and investigated for their coacervation ability. Turbidity measurement of the synthesized peptide analogues revealed that (NTA)-Fn analogues showed strong coacervation ability with various strengths. The transition temperature of NTA-Fn analogues exponentially decreased with increasing number of residues. In the circular dichroism measurements, trimerization did not alter the secondary structure of each peptide chain of the NTA-Fn analogue. In addition, it was also revealed that the NTA-Fn analogue possesses one peptide chain that could be utilized as metal-scavenging agents. The study findings indicated that multimerization of short ELPs via NTA is a useful and powerful strategy to obtain thermoresponsive molecules.

Bisphenol-C is the strongest bifunctional ERα-agonist and ERß-antagonist due to magnified halogen bonding.

We reported that bisphenol AF (BPAF) works as an agonist for estrogen receptor (ER) ERα but as an antagonist for ERß. Similar results were observed for bisphenol E analogs (BPE-X) such as BPE-F, BPE-Cl, and BPE-Br, each consisting of a series of a tri-halogenated methyl group CX3 in the central alkyl moiety. It was demonstrated that the electrostatic halogen bond based on the dispersion force of halogen atoms is a major driving force in the activities of bifunctional ERα-agonist and ERß-antagonist. Since the chlorine atoms present in bisphenol C (BPC) exist in a π-π conjugated system due to the presence of an adjacent C = C double bond, we intended to prove that BPC is also a bifunctional ERα-agonist and ERß-antagonist exhibiting greatly enhanced agonist/antagonist activities. BPC was evaluated for its ability to activate ERα and ERß in the luciferase reporter gene assay using HeLa cells. With high receptor-binding ability to both ERs, BPC was found to be fully active for ERα but inactive for ERß. BPC's definite antagonist activity in ERß was revealed by its inhibitory activity against 17ß-estradiol. Thus, BPC is a bifunctional ERα-agonist and ERß-antagonist. These agonist/antagonist activities were discovered to be extremely high among series of halogen-containing bisphenol compounds. This comparative structure-activity study revealed that the ascending order of ERα-agonist and ERß-antagonist activities was BPE-F ≪ BPE-Cl ≲ BPAF < BPE-Br ≪ BPC. The highly intensified receptor interaction of BPC is attributable to the presence of an n-π-π-n conjugation system mediated through the >C = CCl2 double bond.

A Simple, Low Cost, Sensitive, and Portable Electrochemical Immunochromatography Sensing Device to Measure Estrone-3-Sulfate.

In livestock production, point-of-care testing (POCT) technology that enables easy on-site analysis of sex hormones is desired to improve reproductive efficiency. In this context, low-molecular-weight endogenous steroids are particularly important for perinatal management. Therefore, we attempted to use a simple method that combines electrochemical techniques with immunochromatography to measure estrone-3-sulfate (E1S), one of the low-molecular-weight endogenous steroids that is an estrogen ester. The limit of detection (LOD) for E1S achieved by electrochemical immunochromatography was 570.5 ng/mL, which was one to two orders of magnitude lower than that of small molecule compounds analyzed by other POCT techniques (Primpray et al., Anal. Chim. Acta, 2019). In addition, it was indicated by a colorimetric analysis that the sensitivity of the electrochemical immunochromatographic technique could be enhanced by improving the method of application of the antibodies on the nitrocellulose membrane and the contact between the electrochemical detector and the nitrocellulose membrane.

Evaluation of the Influence of Halogenation on the Binding of Bisphenol A to the Estrogen-Related Receptor γ.

Halogenation of organic compounds is one the most important transformations in chemical synthesis and is used for the production of various industrial products. A variety of halogenated bisphenol analogs have recently been developed and are used as alternatives to bisphenol A (BPA), which is a raw material of polycarbonate that has adverse effects in animals. However, limited information is available on the potential toxicity of the halogenated BPA analogs. In the present study, to assess the latent toxicity of halogenated BPA analogs, we evaluated the binding and transcriptional activities of halogenated BPA analogs to the estrogen-related receptor γ (ERRγ), a nuclear receptor that contributes to the growth of nerves and sexual glands. Fluorinated BPA analogs demonstrated strong ERRγ binding potency, and inverse antagonistic activity, similar to BPA. X-ray crystallography and fragment molecular orbital (FMO) calculation revealed that a fluorine-substituted BPA analog could interact with several amino acid residues of ERRγ-LBD, strengthening the binding affinity of the analogs. The ERRγ binding affinity and transcriptional activity of the halogenated BPAs decreased with the increase in the size and number of halogen atom(s). The IC50 values, determined by the competitive binding assay, correlated well with the binding energy obtained from the docking calculation, suggesting that the docking calculation could correctly estimate the ERRγ binding potency of the BPA analogs. These results confirmed that ERRγ has a ligand binding pocket that fits very well to BPA. Furthermore, this study showed that the binding affinity of the BPA analogs can be predicted by the docking calculation, indicating the importance of the calculation method in the risk assessment of halogenated compounds.

Bisphenol AF: Halogen bonding effect is a major driving force for the dual ERα-agonist and ERß-antagonist activities.

17ß-Estradiol (E2) is a natural steroid ligand for the structurally and physiologically independent estrogen receptors (ERs) ERα and ERß. We recently observed that CF3-containing bisphenol AF (BPAF) works as an agonist for ERα but as an antagonist for ERß. Similar results were also observed for the CCl3-containing bisphenol designated as HPTE. Both BPAF and HPTE are comprised of a tri-halogenated methyl group in the central alkyl moiety of their bisphenol structures, which strongly suggests that halogens contribute directly to the agonist/antagonist dual biological functions. We conducted this study to investigate the structure-activity relationships by assessing together newly synthesized CF3- and CBr3-containing bisphenol E analogs (BPE-X). We first tested bisphenols for their receptor binding ability and then for their transcriptional activities. Halogen-containing bisphenols were found to be fully active for ERα, but almost completely inactive for ERß. When we examined these bisphenols for their inhibitory activities for E2 in ERß, we observed that they worked as distinct antagonists. The ascending order of agonist/antagonist dual biological functions was BPE-F < BPE-Cl (HPTE) ≤ BPAF < BPE-Br, demonstrating that the electrostatic halogen bonding effect is a major driving force of the bifunctional ERα agonist and ERß antagonist activities of BPAF.

Receptor-binding affinities of bisphenol A and its next-generation analogs for human nuclear receptors.

An endocrine-disrupting chemical Bisphenol A (BPA) binds specifically to a nuclear receptor (NR) named ERRγ. Although the importance of receptor-binding evaluation for human NRs is often stressed, the binding characteristics of so-called next-generation (NextGen) bisphenol compounds are still poorly understood. The ultimate objective of this investigation was to evaluate BPA and its NextGen analogs for their abilities to bind to 21 human NRs, the greatest members of NRs for which tritium-labeled specific ligands were available. After establishing the detailed assay conditions for each NR, the receptor binding affinities of total 11 bisphenols were evaluated in competitive binding assays. The results clearly revealed that BPA and the NextGen bisphenols of BPAF, BPAP, BPB, BPC, BPE, and BPZ were highly potent against one or more of NRs such as CAR, ERα, ERß, ERRγ, and GR, with IC50 values of 3.3-73 nM. These bisphenols were suggested strongly to be disruptive to these NRs. BPM and BPP also appeared to be disruptive, but less potently. BPF exhibited only weak effects and only against estrogen-related NRs. Surprisingly, most doubtful bisphenol BPS was supposed not to be disruptive. The NRs to which BPA and NextGen bisphenols did not bind were RARα, RARß, RARγ, and VDR. PPARγ, RORα, RORß, RORγ, RXRα, RXRß, and RXRγ, exhibited very weak interaction with these bisphenols. The ten remaining NRs, namely, ERRγ, ERß, ERα, CAR, GR, PXR, PR, AR, LXRß, and LXRα, showed distinctly strong binding to some bisphenols in this order, being likely to have consequential endocrine-disruption effects.

DMSO-Perturbing Assay for Identifying Promiscuous Enzyme Inhibitors.

In search for enzyme inhibitors, we often encounter "promiscuous" enzyme inhibitors exhibiting nonspecific binding property toward enzyme active site. Therefore, inhibitory candidates should be mechanistically characterized as early as possible in discovery processes. However, there remains a lack of highly reliable and readily available methodology to evaluate specificity of initial hits inhibitors. The present study developed and established a novel DMSO-perturbing assay to identify promiscuous enzyme inhibitors. The assay successfully identified nonspecific binding inhibitors with a broad scope, typically by the attenuation of inhibitory activity by the influence of DMSO-addition. This attenuation would be attributed to the nonspecific binding property of inhibitors toward both productive and nonproductive (nondenatured) states of enzymes in perturbation solution. This working hypothesis was supported by spectroscopic analyses of enzyme conformations and analyses of solvent effects on perturbation. Overall, these results provided a novel concept of the DMSO-perturbing assay.

Enhancement of Self-Aggregation Properties of Linear Elastin-Derived Short Peptides by Simple Cyclization: Strong Self-Aggregation Properties of Cyclo[FPGVG] n, Consisting Only of Natural Amino Acids.

Elastin-like peptides (ELPs) consist of distinctive repetitive sequences, such as (VPGVG) n, exhibit temperature-dependent reversible self-assembly (coacervation), and have been considered to be useful for the development of thermoresponsive materials. Further fundamental studies evaluating coacervative properties of novel nonlinear ELPs could present design concepts for new thermoresponsive materials. In this study, we prepared novel ELPs, cyclic (FPGVG) n (cyclo[FPGVG] n, n = 1-5), and analyzed their self-assembly properties and structural characteristics. Cyclo[FPGVG] n ( n = 3-5) demonstrated stronger coacervation capacity than the corresponding linear peptides. The coacervate of cyclo[FPGVG]5 was able to retain water-soluble dye molecules at 40 °C, which implied that cyclo[FPGVG]5 could be employed as a base material of DDS (drug delivery system) matrices and other biomaterials. The results of molecular dynamics simulations and circular dichroism measurements suggested that a certain chain length was required for cyclo[FPGVG] n to demonstrate alterations in molecular structure that were critical to the exhibition of coacervation.

Stepwise Mechanism of Temperature-Dependent Coacervation of the Elastin-like Peptide Analogue Dimer, (C(WPGVG)3)2.

Elastin-like peptides (ELPs) are distinct, repetitive, hydrophobic sequences, such as (VPGVG) n, that exhibit coacervation, the property of reversible, temperature-dependent self-association and dissociation. ELPs can be found in elastin and have been developed as new scaffold biomaterials. However, the detailed relationship between their amino acid sequences and coacervation properties remains obscure because of the structural flexibility of ELPs. In this study, we synthesized a novel, dimeric ELP analogue (H-C(WPGVG)3-NH2)2, henceforth abbreviated (CW3)2, and analyzed its self-assembly properties and structural factors as indicators of coacervation. Turbidity measurements showed that (CW3)2 demonstrated coacervation at a concentration much lower than that of its monomeric form and another ELP. In addition, the coacervate held water-soluble dye molecules. Thus, potent and distinct coacervation was obtained with a remarkably short sequence of (CW3)2. Furthermore, fluorescence microscopy, dynamic light scattering, and optical microscopy revealed that the coacervation of (CW3)2 was a stepwise process. The structural factors of (CW3)2 were analyzed by molecular dynamics simulations and circular dichroism spectroscopy. These measurements indicated that helical structures primarily consisting of proline and glycine became more disordered at high temperatures with concurrent, significant exposure of their hydrophobic surfaces. This extreme change in the hydrophobic surface contributes to the potent coacervation observed for (CW3)2. These results provide important insights into more efficient applications of ELPs and their analogues, as well as the coacervation mechanisms of ELP and elastin.

Dimerization effects on coacervation property of an elastin-derived synthetic peptide (FPGVG)5.

Elastin, a core protein of the elastic fibers, exhibits the coacervation (temperature-dependent reversible association/dissociation) under physiological conditions. Because of this characteristic, elastin and elastin-derived peptides have been considered to be useful as base materials for developing various biomedical products, skin substitutes, synthetic vascular grafts, and drug delivery systems. Although elastin-derived polypeptide (Val-Pro-Gly-Val-Gly)n also has been known to demonstrate coacervation property, a sufficiently high (VPGVG)n repetition number (n>40) is required for coacervation. In the present study, a series of elastin-derived peptide (Phe-Pro-Gly-Val-Gly)5 dimers possessing high coacervation potential were newly developed. These novel dimeric peptides exhibited coacervation at significantly lower concentrations and temperatures than the commonly used elastin-derived peptide analogs; this result suggests that the coacervation ability of the peptides is enhanced by dimerization. Circular dichroism (CD) measurements indicate that the dimers undergo similar temperature-dependent and reversible conformational changes when coacervation occurs. The molecular dynamics calculation results reveal that the sheet-turn-sheet motif involving a type II ß-turn-like structure commonly observed among the dimers and caused formation of globular conformation of them. These synthesized peptide dimers may be useful not only as model peptides for structural analysis of elastin and elastin-derived peptides, but also as base materials for developing various temperature-sensitive biomedical and industrial products.