Proving the automatic benchtop electrochemical station for the development of dopamine and paracetamol sensors.

The introduced work represents an implementation of the automatic benchtop electrochemical station (BES) as an effective tool for the possibilities of high-throughput preparation of modified sensor/biosensors, speeding up the development of the analytical method, and automation of the analytical procedure for the determination of paracetamol (PAR) and dopamine (DOP) as target analytes. Within the preparation of gold nanoparticles modified screen-printed carbon electrode (AuNPs-SPCE) by electrodeposition, the deposition potential EDEP, the deposition time tDEP, and the concentration of HAuCl4 were optimized and their influence was monitored on 1 mM [Ru(NH3)6]3+/2+ redox probe and 50 µM DOP. The morphology of the AuNPs-SPCE prepared at various modification conditions was observed by SEM. The analytical performance of the AuNPs-SPCE prepared at different modification conditions was evaluated by a construction of the calibration curves of DOP and PAR. SPCE and AuNPs-SPCE at modification condition providing the best sensitivity to PAR and DOP, were successfully used to determine PAR and DOP in tap water by "spike-recovery" approach. The BES yields better reproducibility of the preparation of AuNPs-SPCE (RSD = 3.0%) in comparison with the case when AuNPs-SPCE was prepared manually by highly skilled laboratory operator (RSD = 7.0%).

Electrochemical flow injection approach for routine screening of lipase activity in pancreatic preparations.

A state-of-the-art strategy for the determination of lipase activity in pancreatic preparations using flow injection analysis (FIA) with electrochemical detection (FIA-ED) is described. The procedure is based on the enzymatic reaction of a specific substrate (1,3-dilinoleoyl-glycerol) with lipase from porcine pancreas and determination of enzymatically formed linoleic acid (LA) at +0.4 V by applying a cobalt (II) phthalocyanine-multiwalled carbon-nanotubes modified carbon paste electrode (Co(II)PC/MWCNT/CPE). In order to get a high-performance analytical method, sample preparation, flow system, and electrochemical conditions were optimized. Under optimized conditions the lipase activity of porcine pancreatic lipase was calculated to be 0.47 units per mg lipase protein based on the definition that 1 unit hydrolyses 1 microequivalent linoleic acid from 1,3-dilinoleoyl-glycerol per 1 min at pH 9 and 20 °C (kinetic measurement: 0-25 min). Moreover, the developed procedure was shown to be easily adaptable for the fixed-time assay (incubation time 25 min) as well. In this case, linear correlation between flow signal and lipase activity was found in the range from 0.8 to 18 U L-1. LOD and LOQ were determined to be 0.3 U L-1 and 1 U L-1, respectively. The kinetic assay was further preferred for the determination of lipase activity in commercially available pancreatic preparations. The lipase activities of all preparations obtained by the present method were found to be in good correlation with those obtained by the titrimetric method and declared by manufacturers.

Batch injection analysis in tandem with electrochemical detection: the recent trends and an overview of the latest applications (2015-2020).

The purpose of the proposed review is to refer the contemporary capability of automated analytical systems, in particular batch injection analysis (BIA) in connection with electrochemical detection, for widespread applications in analytical chemistry. This combination recently represents an efficient tool for improvement of method parameters, such as speed, selectivity, and sampling rate for sensing of miscellaneous organic and inorganic substances. The review is focused on conception and usage of BIA in tandem with electrochemical detection utilizing various techniques, namely amperometry, voltammetry, and multiple pulse amperometry, as well as design of electrochemical cells constructed for BIA systems is discussed. Finally, this paper also summarizes the comprehensive overview of works published from 2015 to 2020 dealing with the electrochemical determination of different analytes by BIA in various matrices.

In vitro biological activity of copper(II) complexes with NSAIDs and nicotinamide: Characterization, DNA- and BSA-interaction study and anticancer activity.

Through the reaction of copper(II) acetate with nicotinamide (pyridine-3-carboxylic acid amide, niacinamide) and some derivatives of N-phenylanthranilic acid (fenamates), seven new mixed-ligand copper(II) compounds were isolated: [Cu(tolf-O)(tolf-O,O')nia-N)2(EtOH)] (1), [Cu(tolf-O)(tolf-O,O')(nia-N)2(MeOH)] (2), [Cu(meclf-O)(meclf-O,O')(nia-N)2(EtOH)] (3), [Cu(meclf-O)(meclf-O,O')(nia-N)2(MeOH)] (4), [Cu(meclf-O)(meclf-O,O')(nia-N)2(ACN)] (5), [Cu(mef-O)(mef-O,O')(nia-N)2(EtOH)] (6) and [Cu(mef-O)(mef-O,O')(nia-N)2(ACN)] (7) containing a molecule of relevant solvent as ligand in their primary crystal structure (tolf = tolfenamate, meclf = meclofenamate, mef = mefenamate, nia = nicotinamide, EtOH = ethanol, MeOH = methanol, ACN = acetonitrile). The structures of the complexes were determined by single-crystal X-ray analysis. The intermolecular interactions were studied by Hirshfeld surface analysis. The complexes were characterized by IR, UV-vis and EPR spectroscopy and their redox properties were determined by cyclic voltammetry. The interaction of the complexes with bovine serum albumin was studied by fluorescence emission spectroscopy and the albumin-binding constants of the compounds were calculated. The interaction of the complexes with calf-thymus DNA was monitored by diverse techniques (UV-vis spectroscopy, cyclic voltammetry, viscosity measurements) suggesting intercalation as the most possible mode of binding. DNA-competitive studies of the complexes with ethidium bromide were monitored by fluorescence emission spectroscopy. The cytotoxic effects of copper(II) complexes on lung carcinoma cells and healthy cells were determined by the MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] colorimetric technique.

A Review on Recent Advances in the Applications of Boron-Doped Diamond Electrochemical Sensors in Food Analysis.

The usage of boron-doped diamond (BDD) material has found to be very attractive in modern electroanalytical methods and received massive consideration as perspective electrochemical sensor due to its outstanding (electro)chemical properties. These generally known facilities include large potential window, low background currents, ability to withstand extreme potentials and strong tendency to resist fouling compared to conventional carbon-based electrodes. As evidence of superiority of this material, couple of reviews describing the overview of various applications of BDD electrodes in the field of analytical and material chemistry has been reported in scientific literature during last decade. However, herein proposed review predominantly focuses on the most recent developments (from 2009 to 2020) dealing with the application of BDD as an advanced and environmental-friendly sensor platform in food analysis. The main method characteristics of analysis of various organic food components with different chemical properties, including additives, flavor and aroma components, phenolic compounds, flavonoids and pesticides in food matrices are described in more details. The importance of BDD surface termination, presence of sp2 content and boron doping level on electrochemical sensing is discussed. Apart from this, a special attention is paid to the evaluation of main analytical characteristics of the BDD electrochemical sensor in single- and multi-analyte detection mode in food analysis. The recent achievements in the utilizing of BDD electrodes in amperometric detection coupled to flow injection analysis, batch injection analysis, and high-performance liquid chromatography are also commented. Moreover, actual trends in sample preparation techniques prior to electrochemical sensing in food analysis are referred.

Polyradical PROXYL/TEMPO Conjugates Connected by Ester/Amide Bridges: Synthesis, Physicochemical Studies, and DFT Calculations.

A series of di-/trinitroxide esters and amides featuring PROXYL and/or TEMPO radicals connected with alicyclic bridges were prepared in 61-92 % yields and their properties were analysed by using multiple experimental techniques. The examination of EPR spectra of radicals in organic solvents augmented with DFT calculations brought valuable information on the conformational dynamics and spin exchange mechanisms. Cyclic voltammetry investigations revealed (quasi)reversible electrochemical behaviour of studied nitroxides with their half-wave potentials ranging from -51 to -17 mV. SQUID measurements of selected radicals revealed that the magnetism of di- and trinitroxides is significantly different, since antiferromagnetic coupling in biradicals is notably larger than in triradicals. The single-crystal X-ray analysis of selected biradicals revealed the existence of 3D supramolecular networks of molecules linked through hydrogen-bonding interactions. These polynitroxide radicals can serve as promising bridging or chelating ligands in the synthesis of transition-metal-based molecular magnets.

Overview and recent advances in electrochemical sensing of glutathione - A review.

The present paper is aimed at providing an overview of the recent advances in the electrochemical sensing of glutathione (GSH), an important electrochemically and biologically active molecule, for the period 2012-2018. Herein, the analytical performances of newly developed electrochemical methods, procedures and protocols for GSH sensing are comprehensively and critically discussed with respect to the type of method, electrodes used (new electrode modifications, advanced materials and formats), sample matrices, and basic validation parameters obtained (limit of detection, linear dynamic range, precision, selectivity/evaluation of interferences). This paper considers electrochemical methods used alone as well as the hyphenated methods with electrochemical detection (ECD), such as HPLC-ECD or CE-ECD. The practical applicability of the platforms developed for GSH detection and quantification is mostly focused on pharmaceutical and biomedical analysis. The most significant electrochemical approaches for GSH detection in multicomponent analyte samples and multicomponent matrices and for real-time in vivo GSH analysis are highlighted. The great variability in the electrochemical techniques, electrode approaches, and obtainable performance parameters, discussed in this review, brought new insights not only on current GSH and glutathione disulfide (GSSG) determinations, but, along with this, on the advances in electrochemical analysis from a more general point of view.

Redox-cycling and intercalating properties of novel mixed copper(II) complexes with non-steroidal anti-inflammatory drugs tolfenamic, mefenamic and flufenamic acids and phenanthroline functionality: Structure, SOD-mimetic activity, interaction with albumin, DNA damage study and anticancer activity.

Copper(II) complexes containing non-steroidal anti-inflammatory drugs (NSAIDs) have been the subject of many research papers and reviews. Here we report the synthesis, spectroscopic study and biological activity of novel mixed copper(II) complexes with NSAIDs: tolfenamic (tolf), mefenamic (mef) and flufenamic (fluf) acids and phenanthroline (phen): [Cu(tolf-O,O')2(phen)] (1), [Cu(mef-O,O')2(phen)] (2), [Cu(fluf-O,O')2(phen)] (3). Complexes were characterized by X-ray analysis and EPR spectroscopy. Complexes 1-3 are monomeric, six-coordinate and crystallize in a monoclinic space group. Interaction of Cu(II) complexes with DNA was studied by means of absorption titrations, viscosity measurements and gel electrophoresis. The relative ability of the complexes to cleave DNA even in the absence of hydrogen peroxide is in the order 3 > 2 > 1. Application of the reactive oxygen species (ROS) scavengers, L-histidine, DMSO and SOD confirmed that singlet oxygen, hydroxyl radicals (Fenton reaction) and superoxide radical were formed, respectively. Thus, in addition to mechanism of intercalation, redox-cycling mechanism which in turn lead to the formation of ROS contribute to DNA damage. Cu(II) complexes exhibit excellent SOD-mimetic activity in the order 3~1 > 2. The fluorescence spectroscopy revealed that albumin may act as a targeted drug delivery vehicle for Cu(II) complexes (K~106). The anticancer activities of complexes 1-3 were investigated using an MTS assay (reduction of the tetrazolium compound) against three cancer cell lines (HT-29 human colon adenocarcinoma, HeLa and T-47D breast cancer cells) and mesenchymal stromal cells (MSC). The most promising compound, from the viewpoint of its NSAID biological activity is 3, due to the presence of the three fluorine atoms participating in the formation of weak hydrogen-bonds at the DNA surface.

Protective Properties of a Microstructure Composed of Barrier Nanostructured Organics and SiOx Layers Deposited on a Polymer Matrix.

The SiOx barrier nanocoatings have been prepared on selected polymer matrices to increase their resistance against permeation of toxic substances. The aim has been to find out whether the method of vacuum plasma deposition of SiOx barrier nanocoatings on a polyethylene terephthalate (PET) foil used by Aluminium Company of Canada (ALCAN) company (ALCAN Packaging Kreuzlingen AG (SA/Ltd., Kreuzlingen, Switzerland) within the production of CERAMIS® packaging materials with barrier properties can also be used to increase the resistance of foils from other polymers against the permeation of organic solvents and other toxic liquids. The scanning electron microscopy (SEM) microstructure of SiOx nanocoatings prepared by thermal deposition from SiO in vacuum by the Plasma Assisted Physical Vapour Deposition (PA-PVD) method or vacuum deposition of hexamethyldisiloxane (HMDSO) by the Plasma-enhanced chemical vapour deposition (PECVD) method have been studied. The microstructure and behavior of samples when exposed to a liquid test substance in relation to the barrier properties is described.

Preparation of Filtration Sorptive Materials from Nanofibers, Bicofibers, and Textile Adsorbents without Binders Employment.

The article deals with the preparation and possibilities of using combined filtration sorption systems usable for the construction of folded filters or respirators. The studied materials are made of several structural layers-a filter membrane made of polymeric nanofibers, an adsorbent containing active carbon or porous silicon dioxide nanofibers, and a supporting or cover nonwoven bicomponent fabric. The layers are connected only by pressure at an elevated temperature without the use of binders, according to utility model PUV 31 375. The result is a compact fabric material of textile character with a high permeability, good mechanical resistance, which effectively catches the submicron particles and the gases of the organic substances. The prepared samples of the filter sorptive material have been evaluated not only from the point of view of morphology and microstructure, but also from the point of view of the capture of pollutants.

Bare carbon electrodes as simple and efficient sensors for the quantification of caffeine in commercial beverages.

Food quality control is a mandatory task in the food industry and relies on the availability of simple, cost-effective and stable sensing platforms. In the present work, the applicability of bare glassy carbon electrodes for routine analysis of food samples was evaluated as a valid alternative to chromatographic techniques, using caffeine as test analyte. A number of experimental parameters were optimized and a differential pulse voltammetry was applied for quantification experiments. The detection limit was found to be 2 × 10-5 M (3σ criterion) and repeatability was evaluated by the relative standard deviation of 4.5%. The influence of sugars, and compounds structurally related to caffeine on the current response of caffeine was evaluated and found to have no significant influence on the electrode performance. The suitability of bare carbon electrodes for routine analysis was successfully demonstrated by quantifying caffeine content in seven commercially available drinks and the results were validated using a standard ultra-high performance liquid chromatography method. This work demonstrates that bare glassy carbon electrodes are a simple, reliable and cost-effective platform for rapid analysis of targets such as caffeine in commercial products and they represent therefore a competitive alternative to the existing analytical methodologies for routine food analysis.

Design of titanium nitride- and wolfram carbide-doped RGO/GC electrodes for determination of gallic acid.

In the present paper, the electrochemical behavior and the properties of two modified glassy carbon (GC) electrodes used for quantification of gallic acid in sweet wines were compared. A comparative study was conducted between titanium nitride- or wolfram carbide-doped reduced graphene oxide, labeled as TNrGO and WCrGO, respectively, modified GC electrodes, which are promising composite nanomaterials for electroanalytical applications. For the first time, WCrGO was synthesized and its electroanalytical properties compared with those of TNrGO. Results showed that the proposed materials exhibited enhanced characteristics, e.g., low limits of detection (1.1 µM and 3.1 µM for TNrGO and WCrGO, respectively), wide linear ranges (for TNrGO 4.5-76 µM and for WCrGO 10-100 µM), low adsorption, and low background current, which make them promising candidates for electrochemical sensing applications.

Polyradical PROXYL/TEMPO-Derived Amides: Synthesis, Physicochemical Studies, DFT Calculations, and Antimicrobial Activity.

A series of polynitroxide amides possessing 2,2,5,5-tetramethyl-1-pyrrolidinyloxy (PROXYL) and/or 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) units connected through various bridges were synthesized and their properties were analyzed. EPR spectroscopy provided detailed insight into their paramagnetic character and related properties. A thorough examination of the EPR spectra of dinitroxides in organic solvents provided valuable information on the intramolecular motions, thermodynamics, and spin-exchange mechanisms. Analysis of low-temperature X- and Q-band EPR spectra of the dissolved dinitroxides provided spin-spin distances that were comparable with the theoretical values obtained by DFT. Cyclic voltammetry investigations revealed (quasi)reversible electrochemical behavior for PROXYL-derived biradicals, whereas significant loss of the reversibility was found for TEMPO-containing bi- and polyradicals. The inhibitory activities of the nitroxides against model bacteria, yeasts, and filamentous fungi were assessed.

Manganese dioxide-modified carbon paste electrode for voltammetric determination of riboflavin.

A carbon paste electrode bulk was modified with MnO2 and investigated for use as an electrochemical sensor for riboflavin (vitamin B2) using differential pulse voltammetry (DPV). Riboflavin displays a well expressed oxidation peak at -0.15 V (versus Ag/AgCl) in solutions with a pH value of 2. Effects of pH value, pulse amplitude and pulse time were optimized by employing DPV. The signals obtained are linearly related to the concentrations of riboflavin in the range from 0.02 to 9 µM. Other features include a 15 nM detection limit, and good reproducibility (±3 %) and repeatability (±2 %). Interferences by common compounds were tested, and the method was successfully applied to the determination of riboflavin in pharmaceutical formulations where is gave recoveries in the range from 95 to 97 %. Graphical abstractManganese(IV) oxide was used as a modifier for the carbon paste electrode (MnO2/CPE) for improving its performance toward riboflavin oxidation. Cyclic voltammetry and differential voltammetry were used for characterization and determination of riboflavin, respectively.

Chemical Modification of Boron-Doped Diamond Electrodes for Applications to Biosensors and Biosensing.

Boron-doped diamond (BDD) is a prospective electrode material that possesses many exceptional properties including wide potential window, low noise, low and stable background current, chemical and mechanical stability, good biocompatibility, and last but not least exceptional resistance to passivation. These characteristics extend its usability in various areas of electrochemistry as evidenced by increasing number of published articles over the past two decades. The idea of chemically modifying BDD electrodes with molecular species attached to the surface for the purpose of creating a rational design has found promising applications in the past few years. BDD electrodes have appeared to be excellent substrate materials for various chemical modifications and subsequent application to biosensors and biosensing. Hence, this article presents modification strategies that have extended applications of BDD electrodes in electroanalytical chemistry. Different methods and steps of surface modification of this electrode material for biosensing and construction of biosensors are discussed.

Doping Level of Boron-Doped Diamond Electrodes Controls the Grafting Density of Functional Groups for DNA Assays.

The impact of different doping levels of boron-doped diamond on the surface functionalization was investigated by means of electrochemical reduction of aryldiazonium salts. The grafting efficiency of 4-nitrophenyl groups increased with the boron levels (B/C ratio from 0 to 20,000 ppm). Controlled grafting of nitrophenyldiazonium was used to adjust the amount of immobilized single-stranded DNA strands at the surface and further on the hybridization yield in dependence on the boron doping level. The grafted nitro functions were electrochemically reduced to the amine moieties. Subsequent functionalization with a succinic acid introduced carboxyl groups for subsequent binding of an amino-terminated DNA probe. DNA hybridization significantly depends on the probe density which is in turn dependent on the boron doping level. The proposed approach opens new insights for the design and control of doped diamond surface functionalization for the construction of DNA hybridization assays.

Flow-injection amperometric determination of glucose using a biosensor based on immobilization of glucose oxidase onto Au seeds decorated on core Fe3O4 nanoparticles.

An amperometric biosensor based on chemisorption of glucose oxidase (GOx) on Au seeds decorated on magnetic core Fe3O4 nanoparticles (Fe3O4@Au) and their immobilization on screen-printed carbon electrode bulk-modified with manganese oxide (SPCE{MnO2}) was designed for the determination of glucose. The Fe3O4@Au/GOx modified SPCE{MnO2} was used in a flow-injection analysis (FIA) arrangement. The experimental conditions were investigated in amperometric mode with the following optimized parameters: flow rate 1.7 mL min(-1), applied potential +0.38 V, phosphate buffer solution (PBS; 0.1 mol L(-1), pH 7.0) as carrier and 3.89 unit mm(-2) enzyme glucose oxidase loading on the active surface of the SPCE. The designed biosensor in FIA arrangement yielded a linear dynamic range for glucose from 0.2 to 9.0 mmol L(-1) with a sensitivity of 2.52 µA mM(-1) cm(-2), a detection limit of 0.1 mmol L(-1) and a quantification limit of 0.3 mmol L(-1). Moreover, a good repeatability of 2.8% (number of measurements n=10) and a sufficient reproducibility of 4.0% (number of sensors n=3) were achieved. It was found that the studied system Fe3O4@Au facilitated not only a simpler enzyme immobilization but also provided wider linear range. The practical application of the proposed biosensor for FIA quantification of glucose was tested in glucose sirup samples, honeys and energy drinks with the results in good accordance with those obtained by an optical glucose meter and with the contents declared by the producers.

Antimicrobial activity of novel c2-substituted 1,4-dihydropyridine analogues.

The antimicrobial activity of 3-methyl-5-isopropyl (or ethyl) 6-methyl-4-nitrophenyl-1,4-dihydropyridine-3,5-dicarboxylate derivatives was evaluated. Prokaryotes (bacteria) appeared to be more sensitive to their antimicrobial activity than were eukaryotes (filamentous fungi). The best antibacterial activity was shown by derivative 33, which was able to inhibit the growth of Mycobacterium smegmatis (MIC33 = 9 µg.ml(-1)), Staphylococcus aureus (MIC33 = 25 µg.ml(-1)), and Escherichia coli (MIC33 = 100 µg.ml(-1)). In addition, derivative 4 demonstrated its antibacterial power on the acid-fast bacterial species M. smegmatis and on Gram-positive S. aureus. Focusing on the structure-activity relationship, it appears that the increase in the substituent bulk at the C2 position improved the antibacterial activity of the set of compounds studied. Derivatives 33 and 4, carrying 2-cyano-3-oxo-3-phenylprop-1-en-1-yl and allyliminomethyl groups, respectively, showed significantly higher inhibition activities on all tested microorganisms in comparison with the rest of the derivatives. This enhancement was also in good correlation with different log P values (lipophilicity parameter).

Synthesis, physicochemical properties and antimicrobial activity of mono-/dinitroxyl amides.

Two comparative sets of mono-/dinitroxyl amides were designed and prepared. The novel TEMPO and/or PROXYL derivatives were fully characterised and their spin, redox and antimicrobial properties were determined. Cyclic voltammetry revealed (quasi)reversible redox behavior for most of the studied radicals. Moreover, the electron-withdrawing substituents increased the oxidation potential of nitroxides in comparison to electron-donating groups. While EPR spectra of monoradicals featured the typical three-line signal, the spectra of biradicals showed more complex splitting patterns. The in vitro biological assay revealed that unlike pyrrolidinyl derivatives, the piperidinyl nitroxides significantly inhibited the growth of Staphylococcus sp.

Novel quercetin derivatives in treatment of peroxynitrite-oxidized SERCA1.

Sarco/endoplasmic reticulum calcium ATP-ase (SERCA) is regulated by low concentrations of peroxynitrite and inhibited by high levels, as indicated in human diseases. We studied quercetin (Q) and its novel derivatives monochloropivaloylquercetin (MPQ) and chloronaphthoquinonequercetin (CHQ) as agents with expected preventive properties against peroxynitrite-induced SERCA impairment. Q and MPQ protected the SERCA1 against peroxynitrite induced activity decrease, while CHQ potentiated the inhibitory effect of peroxynitrite. Quercetin derivatives were found to be weaker antioxidants compared with Q, as indicated by their ability to scavenge peroxynitrite and prevent of SERCA1 carbonylation, both decreasing in the order (Q > MPQ > CHQ). Quantum-chemical values of theoretical parameter E HOMO also indicated lower antioxidant capacities for MPQ and CHQ. Prooxidant properties estimated by calculations of frontier molecular orbitals (E LUMO) correlated with experimentally determined SH-group decrease induced by the compounds studied. Both methods showed a decrease of prooxidant properties as follows: CHQ > MPQ > Q. In addition, experimentally measured half-wave potentials indicated stronger prooxidant properties of quercetin derivatives as compared to Q. More expressive alterations of conformation in the transmembrane region of SERCA1 induced by quercetin derivatives, as compared with Q, may at least partially correlate with their higher lipophilicities. The protective effects of Q and MPQ on different isoforms of SERCA activity may be useful in prevention and treatment of inflammation or muscle diseases. The inhibitory effect of CHQ on SERCA isoforms may be beneficial in therapeutic approaches aimed at anti-tumor treatment.