Developing entrustable professional activities for general dentistry at the University of North Carolina.

INTRODUCTION: As part of curriculum innovation, the University of North Carolina (UNC) Adams School of Dentistry identified core entrustable professional activities (EPAs) that graduates must demonstrate for practice readiness. This paper describes the development of the UNC EPAs and the perceptions of the general dentistry faculty. METHODS: Upon establishing a blueprint of knowledge, skills, and attitudes of UNC graduates, using a distributed leadership approach, faculty teams developed EPAs focused on the patient care process. The American Dental Education Association Compendium of Clinical Competency Assessments and Commission on Dental Accreditation Standards informed the team's work. Perceptions of the assessment framework were examined using a questionnaire completed by 13 general dentistry faculty considering the importance, accuracy, and agreement of each EPA, associated domains of competence, and encounter management on a 6-point rating scale. RESULTS: Distributed leadership was a useful strategy in EPA development to disperse decision-making and build ownership. Through multiple iterations, four EPAs (assessment, plan of care, collaborative care, and provision of care) with associated sub-EPAs emerged. EPAs included a description, required knowledge and skills, and rubrics for assessment. The general dentistry faculty reported a high level of importance, accuracy, and agreement with EPAs, domains of competence, and encounter management. DISCUSSION: EPAs provide a standardized manner to describe the comprehensive work dentists perform, shifting away from individual competencies. The UNC EPAs provide the foundation for longitudinal measures of competence preparing graduates for independent practice. With limited EPAs frameworks available in dentistry, we aim to inform the development and implementation of EPAs across dental education.

Effect of different cleansing methods on the artificially aged bond strength of resin to contaminated zirconia: A systematic review.

PURPOSE: The aim of this review was to evaluate studies investigating the effect of cleansing methods on the artificially aged bond strength of resin to contaminated zirconia restorations and determine which cleansing method of contaminated zirconia for resin bonding improvement is more efficient. METHODS: An electronic search of published studies in English language was carried out until July 2021 on Scopus, Web of Science, and Medline databases. Data from in vitro studies involving the evaluation of the artificially aged bond strength of resin to contaminated zirconia following different cleansing methods were included. In vitro studies in which samples were not subjected to at least 5000 thermocycles, were excluded. RESULTS: Of 162 articles retrieved initially, 19 were eligible to be included in the systematic review, of which 5 articles were excluded. Therefore, the final sample was 14 in vitro studies. All of the included studies for air abrasion suggested this method as an effective cleansing method, but 6 of 8 included studies reported cleaning paste (Ivoclean) as an effective cleansing method. All of the included studies for NaOCl and a cleaning gel (AD Gel) reported their efficacy. Finally, the results of included studies showed the ineffectiveness of phosphoric acid, water, isopropanol, enzymatic detergents, hydrogen peroxide, and acetone. CONCLUSIONS: Air abrasion has been reported as an effective cleansing method to improve the bond strength of resin to contaminated zirconia. To improve the effectiveness of cleaning paste in resin bonding, another efficient cleansing method should be followed after this method. However, the superior cleaning potential of air abrasion rather than cleaning paste has been reported. Sodium hypochlorite and cleaning gel seem to be as effective as air abrasion, but extensive water-rinsing is necessary after the application of these cleaning agents.

Preparing for implementation of an entrustable professional activity assessment framework.

Following the adoption of competency-based education in dentistry in the 1990s, entrustable professional activities (EPAs) were introduced in the field of medicine in the mid-2000s to help educators better determine the competence of trainees. More recently, the field of dental education has begun exploring EPAs as a framework for assessing competence while ensuring compliance with accreditation standards. This paper explores one dental school's process of preparing for implementation of a major curriculum change using an EPA assessment framework, shifting away from the use of singular assessments for competency determination to a global and longitudinal approach using a constellation of data to determine practice readiness. This paper describes how the EPA framework was developed, including the complementary capacities, assessment tool development and programming, and data reporting to follow learner progression and determine practice readiness. We discuss lessons learned leading up to implementation, and we position this perspective as a space to describe opportunities and complexities to consider when using a longitudinal assessment system. We attend to the tension between the current language of Commission of Dental Accreditation Standards as "competencies" and the evolving conversation of operationalizing EPAs while addressing accreditation Standards. To do this, we describe the process of finalizing our EPA framework and preparing for initial implementation in a new curriculum.

Evaluation of microleakage in Class II composite restorations: Bonded-base and bulk-fill techniques.

BACKGROUND: This study compared microleakage of Class II cavities restored using bonded-base and bulk-fill techniques with different bases. MATERIALS AND METHODS: In this in vitro study, in 60 extracted human molars, standardized (4 mm × 2 mm × 8 mm) Class II cavities were prepared, such that the gingival floor was located 1 mm below the CEJ. The teeth were randomly divided into five groups and filled with: (1) Fuji II LC + x-tra fil, (2) Ionoseal + x-tra fil, (3) x-tra base + x-tra fil, (4) Grandio Flow + x-tra fil, and (5) x-tra fil only [control group]; in open-sandwich technique, the base thickness was 1 mm. The bases were coated all gingival floor. Except for the first group, where dentin conditioner was used, the Clearfil SE bond was applied before application of the bases and restorative materials as a bonding agent. After 500 thermocycles between 5°C and 55°C, the specimens were immersed in 0.5% basic fuchsine solution for 24 h. The restored teeth were sectioned, and the dye penetration in gingival floor was observed by a stereomicroscope at ×32. The data were analyzed using Kruskal-Wallis and Mann-Whitney tests in SPSS software. The significance was determined at 0.05 confidence interval. RESULTS: The statistical analysis revealed a significant difference in microleakage among the study groups (P < 0.001). The Ionoseal group followed by the control group (x-tra fil composite) had the greatest microleakage. Except for the Ionoseal group, all other groups had significantly less microleakage than the control group. CONCLUSION: The use of bonded-base techniques could reduce microleakage, including those in bulk-fill composite restorations.

Call for ACTion: Transforming Dental Education at the University of North Carolina at Chapel Hill.

The University of North Carolina at Chapel Hill Adams School of Dentistry is developing a transformative curriculum that prepares students to enter contemporary practice. The Advocate, Clinician, and Thinker (ACT) framework will provide the basis for developing a resilient workforce capable of meeting emerging health care needs over the next 40 years.

Effect of composite type and placement technique on cuspal strain.

OBJECTIVE: To compare the cuspal strain in Class II restorations made with bulk-fill and conventional composite resins. MATERIALS AND METHODS: Fifty extracted maxillary premolars were mounted into phenolic rings and divided into five groups (n = 10). Specimens received standardized MOD preparations. A two-step self-etch adhesive was applied and the preparations were restored using a custom matrix as follows: Filtek Supreme Ultra in eight 2-mm increments (FSUI); Filtek Supreme Ultra in bulk (FSUB); SonicFill in bulk (SF); SureFil SDR flow in bulk, covered with a 2-mm occlusal layer of Filtek Supreme Ultra (SDR/FSU); Tetric EvoCeram Bulk Fill in bulk (TEBF). Strain gages bonded to the buccal and lingual cusps recorded cuspal strain during restorations. End strain values were determined and data were subjected to Kruskal-Wallis testing, followed by one-way ANOVA and Tukey´s post hoc test. RESULTS: Combined strain values and standard deviations (in µÉ›) were: FSUI: 723 ± 102.8, FSUB: 929.2 ± 571.9, SF: 519.1 ± 80.2, SDR-FSU: 497.4 ± 67.6 and TEBF: 604.5 ± 127.1. A significant difference was found between group FSUI and groups SF, SDR-FSU, and TEBF. Group FSUB showed significantly higher mean strain and greater standard deviation than all other groups due to cuspal fractures, and was thus excluded from the statistical analysis. CONCLUSIONS: The tested bulk-fill composite resins exerted less strain onto tooth structure than the incrementally placed conventional composite resin, although the magnitude of generated strain was product-dependent. Bulk-filling with conventional composite resins is contraindicated. CLINICAL SIGNIFICANCE: Bulk-fill composite resins exerted less strain onto adjacent tooth structure than a traditional composite, even when that composite is was placed incrementally. Bulk-filling with traditional composite resins is unpredictable and contraindicated.

Six-year clinical performance of etch-and-rinse and self-etch adhesives.

OBJECTIVE: To evaluate the 6-year clinical performance of Xeno IV, Xeno III, and XP Bond adhesives in the restoration of non-carious cervical lesions (NCCLs). METHODS: This was a randomized controlled clinical trial where 39 participants met the inclusion/exclusion criteria and were enrolled. Lesions restored were notch-shaped NCCLs. Prior to adhesive procedures, NCCLs were roughened. No enamel bevel was placed and no mechanical retention was created. Adhesive systems were applied following manufacturer's instructions and the NCCLs were restored with composite resin (TPH(3)). Restorations were finished immediately after placement and scored with regard to retention, marginal discoloration, marginal adaptation, sensitivity, and secondary caries using modified USPHS criteria. Descriptive statistics were performed. Logistic regression models were performed for each outcome separately with compound symmetry correlation structure where teeth were clustered by participants. All analyses were conducted using SAS 9.2. RESULTS: The 6-year recall rate was 77.5% of the restorations (76.9% of the participants). No statistical differences were found between adhesives for retention, marginal discoloration, and marginal adaptation. Restorations failed by loss of retention (16.7%, 27.6%, and 11.8% of Xeno IV, Xeno III, and XP Bond restorations, respectively) and marginal discoloration (7.4% of Xeno IV restorations). For every unit increase in restoration volume it was 1.31 (95%C.I. 1.05, 1.63, P=0.01) times more likely that the restoration retention would be maintained. SIGNIFICANCE: The tested adhesive systems presented similar clinical performance after six years of service, with annual failure rates of 2.8%, 4.6%, and 2.0% for Xeno IV, Xeno III, and XP Bond, respectively.

A Connective Tissue Graft as a Biologic Alternative to Class V Restorations in Miller Class I and II Recession Defects: Case Series.

Although cervical lesions are commonly treated using restorative materials, the esthetics and durability of the restoration can be problematic. Despite improvements in bonding to dentin, the performance of resin-based cervical restorations suffers from a variety of clinical problems. Biologic options using connective tissue grafts to replace the lost soft tissues have proven longevity and esthetic benefits. A collection of case reports is presented to demonstrate a surgical alternative to correct carious and noncarious cervical lesions. Clinicians should consider the biologic option of replacing the missing gingival tissue prior to placement of restorative materials on exposed root surfaces.

Effect of finishing technique on the occurrence and length of microcracks in resin-based materials.

PURPOSE: To evaluate the presence and length of microcracks in resin-based materials finished with different techniques, using optical coherence tomography (OCT). METHODS: Standardized Class V preparations (3x2x2mm) were made in the facial and lingual surfaces of 20 recently-extracted human third molars. 20 preparations were restored with a resin-based composite material (RBC; Filtek Supreme Ultra) and the other 20 with a resin-modified glass-ionomer material (RMGI; Ketac Nano). After final polymerization, specimens were further stratified by finishing system: aluminum oxide discs (Sof-Lex) or spiral fluted carbide bur series (H48L). By random allocation, each extracted tooth therefore received one RBC and one RMGI restoration, and equal numbers of restorations from each material were finished using each finishing system (n= 10). After 24 hours of storage in 100% humidity at room temperature, the specimens were evaluated at x20 to x600 under environmental SEM. Cross-sectional occlusal-cervical B-mode images were obtained in increments of 25 mm from the mesial margin to the distal margin of the restoration using a spectral-domain (SD) OCT system and analyzed using Image J software to identify and measure microcrack penetration into each restoration. The total length (mm) at the point of the deepest microcrack penetration in each specimen was recorded. Data were statistically analyzed using a t-test. RESULTS: No microcracks were observed in the RBC samples. However, microcrack presence was identified in all of the RMGI specimens. The t-test showed a statistically significant difference (P< 0.05) in mean microcrack length values based on the finishing technique used for the RMGI samples. [SofLex: 0.67 (± 0.28) mm; carbide: 1.26 (± 0.30)] mm. Two-way ANOVA showed significant differences in the factors "finishing technique" and "restorative material" (P< 0.001). The interaction of these two factors was also statistically significant (P< 0.001). For the tested RMGI, Tukey post-hoc test revealed that the finishing with aluminum oxide groups resulted in statistically significant lower mean microcrack length when compared to spiral fluted carbide burs (P< 0.001). CLINICAL SIGNIFICANCE: Resin-modified glass-ionomer (RMGI) is more susceptible to microcrack presence than resin-based composites. Also, aluminum oxide discs produced lower values of mean microcrack length than spiral fluted carbide burs after the finishing procedure of RMGI restorations.

Critical Appraisal: Bulk-fill Composites, Part I.

The Journal of Esthetic and Restorative Dentistry published a Critical Appraisal of bulk-fill flowable composite resins by Dr. Ricardo Walter in early 2013 (JERD 2013;25(1):72-6). Since then, new bulk-fill composite options have become available and have rapidly achieved great popularity. This two-part Critical Appraisal reviews some of the more recent information on the various bulk-fill options.

Critical appraisal. Evidence for sealing versus restoration of early caries lesions.

Resin-based pit and fissure sealants are established tools for prevention of dental caries. Conversely, the role of sealants for management of existing early dental caries lesions has been disputed despite the recommendation from the American Dental Association Council on Scientific Affairs. The development of more sensitive caries detection technologies has revealed that many sealants have likely been placed over incipient lesions inadvertently over the years. However, the issue remains whether sealing overt incipient occlusal caries lesions leads to a worse outcome versus restoring the surface. Certainly, there are diverse opinions regarding this topic. But what does the science say? This Critical Appraisal presents evidence from several clinical trials for sealing incipient occlusal caries lesions.