Tantalum Oxide as an Efficient Alternative Electron Transporting Layer for Perovskite Solar Cells.

Electron transporting layers facilitating electron extraction and suppressing hole recombination at the cathode are crucial components in any thin-film solar cell geometry, including that of metal-halide perovskite solar cells. Amorphous tantalum oxide (Ta2O5) deposited by spin coating was explored as an electron transport material for perovskite solar cells, achieving power conversion efficiency (PCE) up to ~14%. Ultraviolet photoelectron spectroscopy (UPS) measurements revealed that the extraction of photogenerated electrons is facilitated due to proper alignment of bandgap energies. Steady-state photoluminescence spectroscopy (PL) verified efficient charge transport from perovskite absorber film to thin Ta2O5 layer. Our findings suggest that tantalum oxide as an n-type semiconductor with a calculated carrier density of ~7 × 1018/cm3 in amorphous Ta2O5 films, is a potentially competitive candidate for an electron transport material in perovskite solar cells.

Developing sustainable, high-performance perovskites in photocatalysis: design strategies and applications.

Solar energy is attractive because it is free, renewable, abundant and sustainable. Photocatalysis is one of the feasible routes to utilize solar energy for the degradation of pollutants and the production of fuel. Perovskites and their derivatives have received substantial attention in both photocatalytic wastewater treatment and energy production because of their highly tailorable structural and physicochemical properties. This review illustrates the basic principles of photocatalytic reactions and the application of these principles to the design of robust and sustainable perovskite photocatalysts. It details the structures of the perovskites and the physics and chemistry behind photocatalytic reactions and describes the advantages and limitations of popular strategies for the design of photoactive perovskites. This is followed by examples of how these strategies are applied to enhance the photocatalytic efficiency of oxide, halide and oxyhalide perovskites, with a focus on materials with potential for practical application, that is, not containing scarce or toxic elements. It is expected that this overview of the development of photocatalysts and deeper understanding of photocatalytic principles will accelerate the exploitation of efficient perovskite photocatalysts and bring about effective solutions to the energy and environmental crisis.

Histopathologic features and fragmentation of polyps with cold snare defect protrusions.

BACKGROUND AND AIMS: Cold snare defect protrusions (CSDPs) include muscularis mucosa (MM) and submucosa tissue. CSDPs are thought to result from fragmentation of the specimen during shallow excision. Our aim in this study was to clarify whether CSDPs are associated with polyp fragmentation. METHODS: We retrospectively analyzed 1026 neoplastic colorectal polyps resected by cold snare polypectomy for which the presence or absence of CSDPs was assessed from the endoscopic image. All prepared specimens were reviewed and assessed for the presence or absence of polyp fragmentation, and the proportion of MM on the stump was measured. In addition, the risk factors for CSDP occurrence were evaluated. RESULTS: CSDPs occurred in 116 of the 1026 polyps (11.3%). Polyp fragmentation was significantly associated with the occurrence of CSDP on univariate analysis (odds ratio [OR], 3.74; P < .001) and multivariate analysis (OR, 3.13; P < .001). The proportion of MM >50% was significantly lower in the CSDP group than in the non-CSDP group (51.5% vs 70.9%, P < .001). CSDPs were significantly associated with a large polyp size (OR, 1.32; P = .007) and a large specimen size (OR, 1.24; P < .001) on multivariate analysis. CONCLUSIONS: The occurrence of CSDP was associated with less MM on the stump and fragmentation of the specimen. Clinically, the presence of CSDP is a good indicator of polyp fragmentation.

Synthesis of Insulated Heteroaromatic Platinum-Acetylide Complexes with Color-Tunable Phosphorescence in Solution and Solid States.

Phosphorescence colors of cyclodextrin-based insulated Pt-acetylide complexes were tuned by the molecular engineering of the chromophores. A series of Pt complexes bearing various acetylide ligands, including heteroaromatics, were prepared via self-inclusion of the linked macrocycles with the complexes. The decline in the inclusion efficiency derived from the heteroaromatics was overcome by the late-stage insulation via intramolecular slippage after the construction of the Pt-acetylide complexes. The cyclic protection of the thus-formed complexes prevented phosphorescence quenching via molecular interactions, even in the solid state. Accordingly, the tuned emission colors in a dilute system were replicated in the solid state.

Complementary Color Tuning by HCl via Phosphorescence-to-Fluorescence Conversion on Insulated Metallopolymer Film and Its Light-Induced Acceleration.

An insulated metallopolymer that undergoes phosphorescence-to-fluorescence conversion between complementary colors by an acid-stimulus is proposed as a color-tunable material. A Pt-based phosphorescent metallopolymer, where the conjugated polymeric backbone is insulated by a cyclodextrin, is depolymerized by HCl via acidic cleavage of Pt-acetylide bonds to form a fluorescent monomer. The insulation enables phosphorescence-to-fluorescence conversion to take place in the solid film. Rapid color change was achieved by accelerating the reaction between the metallopolymer and HCl by UV irradiation. These approaches are expected to provide new guidelines for the development of next-generation color-tunable materials and printable sensors based on precise molecular engineering.

Insulated conjugated bimetallopolymer with sigmoidal response by dual self-controlling system as a biomimetic material.

Biological systems are known to spontaneously adjust the functioning of neurotransmitters, ion channels, and the immune system, being promoted or regulated through allosteric effects or inhibitors, affording non-linear responses to external stimuli. Here we report that an insulated conjugated bimetallopolymer, in which Ru(II) and Pt(II) complexes are mutually connected with insulated conjugations, exhibits phosphorescence in response to CO gas. The net profile corresponds to a sigmoidal response with a dual self-controlling system, where drastic changes were exhibited at two threshold concentrations. The first threshold for activation of the system is triggered by the depolymerization of the non-radiative conjugated polymer to luminescent monomers, while the second one for regulation is triggered by the switch in the rate-determining step of the Ru complex. Such a molecular design with cooperative multiple transition metals would provide routes for the development of higher-ordered artificial molecular systems bearing bioinspired responses with autonomous modulation.

Wafer-Scale Synthesis of Semiconducting SnO Monolayers from Interfacial Oxide Layers of Metallic Liquid Tin.

Atomically thin semiconductors are one of the fastest growing categories in materials science due to their promise to enable high-performance electronic and optical devices. Furthermore, a host of intriguing phenomena have been reported to occur when a semiconductor is confined within two dimensions. However, the synthesis of large area atomically thin materials remains as a significant technological challenge. Here we report a method that allows harvesting monolayer of semiconducting stannous oxide nanosheets (SnO) from the interfacial oxide layer of liquid tin. The method takes advantage of van der Waals forces occurring between the interfacial oxide layer and a suitable substrate that is brought into contact with the molten metal. Due to the liquid state of the metallic precursor, the surface oxide sheet can be delaminated with ease and on a large scale. The SnO monolayer is determined to feature p-type semiconducting behavior with a bandgap of ∼4.2 eV. Field effect transistors based on monolayer SnO are demonstrated. The synthetic technique is facile, scalable and holds promise for creating atomically thin semiconductors at wafer scale.

Hetero Face-to-Face Porphyrin Array with Cooperative Effects of Coordination and Host-Guest Complexation.

We successfully synthesized a hetero face-to-face porphyrin array composed of ZnTPP and RuTPP(DABCO)2 (TPP: 5, 10, 15, 20-tetraphenylporphyrin, DABCO: 1,4-diazabi-cyclo[2.2.2]octane) in 2:1 molar ratio. A cyclic Zn porphyrin dimer (ZnCP) was also used as the host molecule for the Ru porphyrin. In the latter, the Ru-DABCO bonding in RuTPP(DABCO)2 was stabilized by the host-guest complexation. Reaction progress kinetic analysis of the ligand substitution reaction of RuTPP(DABCO)2 and that in ZnCP revealed the stabilization mechanism of the Ru-DABCO bonding. Photoinduced electron transfer (PET) from the Zn porphyrin to the Ru porphyrin was observed in the porphyrin array. The host-guest stabilization of unstable complex for construction of a donor-acceptor-donor structure is expected to be a new method for an artificial photosynthesis.

Semiconductor Quantum Dot Sensitized Solar Cells Based on Ferricyanide/Ferrocyanide Redox Electrolyte Reaching an Open Circuit Photovoltage of 0.8 V.

Semiconductor quantum dot sensitized solar cells (QDSSCs) have rapidly been developed, and their efficiency has recently exceeded 9%. Their performances have mainly been achieved by focusing on improving short circuit photocurrent employing polysulfide electrolytes. However, the increase of open circuit photovoltage (VOC) cannot be expected with QDSSCs based on the polysulfide electrolytes owing to their relatively negative redox potential (around -0.65 V vs Ag/AgCl). Here, we demonstrate enhancement of the open circuit voltage by employing an alternative electrolyte, ferricyanide/ferrocyanide redox couple. The solar cell performance was optimized by investigating the influence of ferricyanide and ferrocyanide concentration on their interfacial charge transfer and transport kinetics. The optimized ferricyanide/ferrocyanide species concentrations (0.01/0.2 M) result in solar energy conversion efficiency of 2% with VOC of 0.8 V. Since the potential difference between the TiO2 conduction band edge at pH 7 and the electrolyte redox potential is about 0.79 V, although the conduction band edge shifts negatively under the negative bias application into the TiO2 electrode, the solar cell with the optimized electrolyte composition has nearly reached the theoretical maximum voltage. This study suggests a promising method to optimize an electrolyte composition for maximizing solar energy conversion efficiency.

Photo-excitation intensity dependent electron and hole injections from lead iodide perovskite to nanocrystalline TiO2 and spiro-OMeTAD.

Photo-excitation intensity dependent electron and hole injections from CH3NH3PbI3 perovskite to nanocrystalline TiO2 and spiro-OMeTAD are presented with the electron injection yield decrease from 95% to 10% and the hole injection yield decrease from 99% to 50% by increasing the excitation intensity from 10 nJ cm(-2) to 50 µJ cm(-2).

On-farm solid state simultaneous saccharification and fermentation of whole crop forage rice in wrapped round bale for ethanol production.

BACKGROUND: In an attempt to reduce environmental loading during ethanol production from cellulosic plant biomass, we have previously proposed an on-site solid state fermentation (SSF) method for producing ethanol from whole crops, which at the same time provides cattle feed without producing wastes. During the ensiling of freshly harvested plant biomass with cellulase and glucoamylase, the added yeast and lactic acid bacteria induced simultaneous saccharification and production of ethanol and lactic acid in hermetically sealed containers on-farm. In a previous study, laboratory-scale SSF (using 250 g of fresh rice crop biomass) yielded 16.9 weight % ethanol in dry matter (DM) after 20 days of incubation. In this study, the fermentation volume was scaled up to a normal-sized round bale and the fermentation process (ethanol concentrations of the products) was monitored. The ethanol produced was recovered and the recovery efficiency was evaluated. RESULTS: SSF tests with forage rice round bales using polyethylene-wrapped whole plant materials (cultivar Leaf Star, average of 125.2 kg dry weight) were monitored in the field without temperature control. They yielded 14.0 weight % ethanol and 2.9 weight % lactic acid in DM after six months of incubation, and the ethanol ratio in the bale remained stable for 14 months after processing. SSF tests with three different rice cultivars were conducted for three years. Ethanol recovery from a fermented whole bale (244 kg fresh matter (FM) containing about 12.4 kg ethanol) by one-step distillation using vacuum distillation equipment yielded 86.3% ethanol collected from distilled solution (107 kg of 10.0 weight % ethanol). In addition, an average of 1.65 kg ethanol in 40.8 kg effluent per bale was recovered. Relative nitrogen content was higher in SSF products than in silage made from the same plant material, indicating that fermentation residue, whose quality is stabilized by the lactic acid produced, can be used as cattle feed. CONCLUSIONS: We have successfully demonstrated an efficient on-site ethanol production system with non-sterilized whole rice crop round bale. However, issues concerning the establishment of the ethanol recovery procedure on-site and evaluation of the fermentation residue as cattle feed have to be addressed.

Application of the tris(acetylacetonato)iron(III)/(II) redox couple in p-type dye-sensitized solar cells.

An electrolyte based on the tris(acetylacetonato)iron(III)/(II) redox couple ([Fe(acac)3](0/1-)) was developed for p-type dye-sensitized solar cells (DSSCs). Introduction of a NiO blocking layer on the working electrode and the use of chenodeoxycholic acid in the electrolyte enhanced device performance by improving the photocurrent. Devices containing [Fe(acac)3](0/1-) and a perylene-thiophene-triphenylamine sensitizer (PMI-6T-TPA) have the highest reported short-circuit current (J(SC)=7.65 mA cm(-2)), and energy conversion efficiency (2.51%) for p-type DSSCs coupled with a fill factor of 0.51 and an open-circuit voltage V(OC)=645 mV. Measurement of the kinetics of dye regeneration by the redox mediator revealed that the process is diffusion limited as the dye-regeneration rate constant (1.7×10(8) M(-1) s(-1)) is very close to the maximum theoretical rate constant of 3.3×10(8) M(-1) s(-1). Consequently, a very high dye-regeneration yield (>99%) could be calculated for these devices.

Origin of surface trap states in CdS quantum dots: relationship between size dependent photoluminescence and sulfur vacancy trap states.

Monodisperse cadmium sulphide (CdS) quantum dots (QDs) with a tunable size from 1.4 to 4.3 nm were synthesized by a non-injection method, and their surface states were characterized by photoluminescence spectroscopy and X-ray Photoelectron Spectroscopy (XPS). The steady state photoluminescence study identified that the proportion of the trap state emission increased with the QD size decrease, while from the photoluminescence decay study, it appeared that the trap state emission results from the emission via a surface deep trap state. The XPS measurements revealed the existence of surface Cd with sulfur vacancy sites which act as electron trap sites, and the population of these sites increases with the QD size decrease. These results are consistent to conclude that the trap state emission mainly originates from the surface deep trapped electrons at the surface Cd with sulfur vacancy sites.

Enhancement of phosphorescence and unimolecular behavior in the solid state by perfect insulation of platinum-acetylide polymers.

Controlling the thermal fluctuations and molecular environment of a phosphorescent polymer backbone is vital to enhancing its phosphorescence intensity in the solid state. Here, we demonstrate enhanced phosphorescence control through a systematic investigation of cyclodextrin-based insulated platinum-acetylide polymers with well-defined coverage areas. Modification of the coverage areas revealed two unprecedented effects of macrocyclic insulation on phosphorescence behavior. First, the insulation of particular areas suppresses the thermal relaxation processes of the triplet species because of the restriction of structural fluctuations. Cyclic insulation fixes a polymer chain and concomitantly enhances the phosphorescence intensity in both the solution and solid states. Second, complete three-dimensional insulation protects the polymer from interactions with other platinum and acetylide units, and even oxygen molecules. Notably, these polymers display identical phosphorescence behaviors in both the solution and solid states, essentially achieving "unimolecular phosphorescence."

Near-infrared absorbing Cu12Sb4S13 and Cu3SbS4 nanocrystals: synthesis, characterization, and photoelectrochemistry.

Herein, we present the novel synthesis of tetrahedrite copper antimony sulfide (CAS) nanocrystals (Cu12Sb4S13), which display strong absorptions in the visible and NIR. Through ligand tuning, the size of the Cu12Sb4S13 NCs may be increased from 6 to 18 nm. Phase purity is achieved through optimizing the ligand chemistry and maximizing the reactivity of the antimony precursor. We provide a detailed investigation of the optical and photoelectrical properties of both tetrahedrite (Cu12Sb4S13) and famatinite (Cu3SbS4) NCs. These NCs were found to have very high absorption coefficients reaching 10(5) cm(-1) and band gaps of 1.7 and 1 eV for tetrahedrite and famatinite NCs, respectively. Ultraviolet photoelectron spectroscopy was employed to determine the band positions. In each case, the Fermi energies reside close to the valence band, indicative of a p-type semiconductor. Annealing of tetrahedrite CAS NC films in sulfur vapor at 350 °C was found to result in pure famatinite NC films, opening the possibility to tune the crystal structure within thin films of these NCs. Photoelectrochemistry of hydrazine free unannealed films displays a strong p-type photoresponse, with up to 0.1 mA/cm(2) measured under mild illumination. Collectively these optical properties make CAS NCs an excellent new candidate for both thin film and hybrid solar cells and as strong NIR absorbers in general.

Dye regeneration kinetics in dye-sensitized solar cells.

The ideal driving force for dye regeneration is an important parameter for the design of efficient dye-sensitized solar cells. Here, nanosecond laser transient absorption spectroscopy was used to measure the rates of regeneration of six organic carbazole-based dyes by nine ferrocene derivatives whose redox potentials vary by 0.85 V, resulting in 54 different driving-force conditions. It was found that the reaction follows the behavior expected for the Marcus normal region for driving forces below 29 kJ mol(-1) (ΔE = 0.30 V). Driving forces of 29-101 kJ mol(-1) (ΔE = 0.30-1.05 V) resulted in similar reaction rates, indicating that dye regeneration is diffusion controlled. Quantitative dye regeneration (theoretical regeneration yield 99.9%) can be achieved with a driving force of 20-25 kJ mol(-1) (ΔE ≈ 0.20-0.25 V).

Severe hypercalcemia associated with hepatocellular carcinoma secreting intact parathyroid hormone: a case report.

Here we describe a 73-year-old woman with hypercalcemia caused by a hepatocellular carcinoma (HCC) secreting intact parathyroid hormone (iPTH). Serum tumor markers and dynamic CT findings indicated a diagnosis of HCC. The source of the elevated serum iPTH was not obvious. Transarterial chemoembolization (TACE) was effective against the HCC, and the serum iPTH level fell to within the normal range, suggesting a correlation between the carcinoma and the iPTH. About 2 months later, the tumor had grown and the serum calcium level increased leading to physical deterioration and death. This clinical course suggested that HCC can ectopically secrete iPTH.

Dye-sensitized solar cells based on WO3.

In research on alternative photoanode materials for dye-sensitized solar cells (DSCs), there is rarely any report on WO(3), probably due to its acidic surface and more positive (vs NHE) conduction band edge position compared to TiO(2) and ZnO. For the first time, dye-sensitized solar cells based on porous WO(3) nanoparticle films were successfully fabricated with efficiency of up to 0.75%. The multicrystalline structure of WO(3) was examined by Raman spectroscopy and X-ray diffraction analysis. It was found that significant performance enhancement can be obtained from treating the WO(3) nanoparticle film with TiCl(4); the TiCl(4)-treated WO(3) DSCs were recorded with efficiency reaching 1.46%.

Organic conducting wire formation on a TiO2 nanocrystalline structure: towards long-lived charge separated systems.

Conjugated polymer monolayers have successfully been fabricated on a TiO(2) nanocrystalline electrode by a lateral intermonomer charge transfer process, extending the photo-induced charge separated state lifetime by a factor of 50-70.

Polyacrylic acid coating of highly luminescent CdS nanocrystals for biological labeling applications.

Surface coating of highly luminescent CdS nanocrystals by polyacrylic acid was demonstrated. The method proceeded in 2 steps, (i) modification of the CdS surface by alkyl molecules and (ii) polyacrylic acid coating of the surface modified CdS. Attachment of alkyl ammonium on the CdS surface induced a phase transfer reaction from an aqueous to a non-polar phase with a yield of approximately 100%. Investigating alkyl molecules with various functional groups revealed that the alkyl molecules, possessing the cation moiety, such as amine or ammonium salt, can electrostatically interact with the CdS surface. The PL of the uncoated nanocrystals was almost entirely quenched in the pH range of approximately 7, while the polyacrylic acid coated nanocrystals exhibited moderate PL intensity. This PL intensity was preserved for at least several days, facilitating biological labeling application under a neutral condition.