ZnO Nanocages Decorated with Au@AgAu Yolk-Shell Nanomaterials for SERS-Based Detection of Hyperuricemia.

Surface-enhanced Raman scattering (SERS) is widely recognized as a highly sensitive technology for chemical detection and biological sensing. In SERS-based biomedical applications, developing highly efficient sensing platforms based on SERS plays a pivotal role in monitoring disease biomarker levels and facilitating the early detection of cancer biomarkers. Hyperuricemia, characterized by abnormally high concentrations of uric acid (UA) in the blood, was associated with a range of diseases, such as gouty arthritis, heart disease, and acute kidney injury. Recent reports have demonstrated the correlation between UA concentrations in blood and tears. In this work, we report the fabrication of SERS substrates utilizing ZnO nanocages and yolk-shell-structured plasmonic nanomaterials for the noninvasive detection of UA in tears. This innovative SERS substrate enables noninvasive and sensitive detection of UA to prevent hyperuricemia-related diseases.

Rapid recruitment and IFN-I-mediated activation of monocytes dictate focal radiotherapy efficacy.

The recruitment of monocytes and their differentiation into immunosuppressive cells is associated with the low efficacy of preclinical nonconformal radiotherapy (RT) for tumors. However, nonconformal RT (non-CRT) does not mimic clinical practice, and little is known about the role of monocytes after RT modes used in patients, such as conformal RT (CRT). Here, we investigated the acute immune response induced by after CRT. Contrary to non-CRT approaches, we found that CRT induces a rapid and robust recruitment of monocytes to the tumor that minimally differentiate into tumor-associated macrophages or dendritic cells but instead up-regulate major histocompatibility complex II and costimulatory molecules. We found that these large numbers of infiltrating monocytes are responsible for activating effector polyfunctional CD8+ tumor-infiltrating lymphocytes that reduce tumor burden. Mechanistically, we show that monocyte-derived type I interferon is pivotal in promoting monocyte accumulation and immunostimulatory function in a positive feedback loop. We also demonstrate that monocyte accumulation in the tumor microenvironment is hindered when RT inadvertently affects healthy tissues, as occurs in non-CRT. Our results unravel the immunostimulatory function of monocytes during clinically relevant modes of RT and demonstrate that limiting the exposure of healthy tissues to radiation has a positive therapeutic effect on the overall antitumor immune response.

Au@Ag nanostructures for the sensitive detection of hydrogen peroxide.

Hydrogen peroxide (H2O2) is an important molecule in biological and environmental systems. In living systems, H2O2 plays essential functions in physical signaling pathways, cell growth, differentiation, and proliferation. Plasmonic nanostructures have attracted significant research attention in the fields of catalysis, imaging, and sensing applications because of their unique properties. Owing to the difference in the reduction potential, silver nanostructures have been proposed for the detection of H2O2. In this work, we demonstrate the Au@Ag nanocubes for the label- and enzyme-free detection of H2O2. Seed-mediated synthesis method was employed to realize the Au@Ag nanocubes with high uniformity. The Au@Ag nanocubes were demonstrated to exhibit the ability to monitor the H2O2 at concentration levels lower than 200 µM with r2 = 0.904 of the calibration curve and the limit of detection (LOD) of 1.11 µM. In the relatively narrow range of the H2O2 at concentration levels lower than 40 µM, the LOD was calculated to be 0.60 µM with r2 = 0.941 of the calibration curve of the H2O2 sensor. This facile fabrication strategy of the Au@Ag nanocubes would provide inspiring insights for the label- and enzyme-free detection of H2O2.

Plasmonic Nanostructures-Decorated ZIF-8-Derived Nanoporous Carbon for Surface-Enhanced Raman Scattering.

Surface-enhanced Raman scattering (SERS) is considered to be a highly sensitive platform for chemical and biological sensing. Recently, owing to their high porosity and large surface area, metal-organic frameworks (MOFs) have attracted considerable attention in sensing applications. Porous carbon nanostructures are promising SERS substrates due to their strong broadband charge-transfer resonance and reproducible fabrication. Furthermore, an extraordinarily large enhancement of the electromagnetic field enables plasmonic nanomaterials to be ideal SERS substrates. Here, we demonstrate the porous Au@Ag nanostructure-decorated MOF-derived nanoporous carbon (NPC) for highly efficient SERS sensing. Specifically, this plasmonic nanomaterial-NPC composite offers high Raman signal enhancement with the ability to detect the model Raman reporter 2-naphthalenethiol (2-NT) at picomolar concentration levels.

In vivo bioluminescence imaging of granzyme B activity in tumor response to cancer immunotherapy.

Cancer immunotherapy has revolutionized the treatment of cancer, but only a small subset of patients benefits from this new treatment regime. Imaging tools are useful for early detection of tumor response to immunotherapy and probing the dynamic and complex immune system. Here, we report a bioluminescence probe (GBLI-2) for non-invasive, real-time, longitudinal imaging of granzyme B activity in tumors receiving immune checkpoint inhibitors. GBLI-2 is made of the mouse granzyme B tetrapeptide IEFD substrate conjugated to D-luciferin through a self-immolative group. GBLI-2 was evaluated for imaging the dynamics of the granzyme B activity and predicting therapeutic efficacy in a syngeneic mouse model of CT26 murine colorectal carcinoma. The GBLI-2 signal correlated with the change in the population of PD-1- and granzyme B-expressing CD8+ T cells in tumors.

Shape-Dependent Biodistribution of Biocompatible Silk Microcapsules.

Microcapsules are emerging as promising microsize drug carriers due to their remarkable deformability. Shape plays a dominant role in determining their vascular transportation. Herein, we explored the effect of the shape of the microcapsules on the in vivo biodistribution for rational design of microcapsules to achieve optimized targeting efficiency. Silk fibroin, a biocompatible, biodegradable, and abundant material, was utilized as a building block to construct biconcave discoidal and spherical microcapsules with diameter of 1.8 µm and wall thickness of 20 nm. We have compared the cytocompatibility, cellular uptake, and biodistribution of both microcapsules. Both biconcave and spherical microcapsules exhibited excellent cytocompatibility and internalization into cancer cells. During blood circulation in mice, both microcapsules showed retention in liver and kidney and most underwent renal clearance. However, we observed significantly higher accumulation of biconcave silk microcapsules in lung compared with spherical microcapsules, and the accumulation was found to be stable in lung even after 3 days. The higher concentration of biconcave discoidal microcapsules found in lung arises from pulmonary environment, margination dynamics, and enhanced deformation in bloodstream. Red blood cell (RBC)-mimicking silk microcapsules demonstrated here can potentially serve as a promising platform for delivering drugs for lung diseases.

Photothermally Active Reduced Graphene Oxide/Bacterial Nanocellulose Composites as Biofouling-Resistant Ultrafiltration Membranes.

Biofouling poses one of the most serious challenges to membrane technologies by severely decreasing water flux and driving up operational costs. Here, we introduce a novel anti-biofouling ultrafiltration membrane based on reduced graphene oxide (RGO) and bacterial nanocellulose (BNC), which incoporates GO flakes into BNC in situ during its growth. In contrast to previously reported GO-based membranes for water treatment, the RGO/BNC membrane exhibited excellent aqueous stability under environmentally relevant pH conditions, vigorous mechanical agitation/sonication, and even high pressure. Importantly, due to its excellent photothermal property, under light illumination, the membrane exhibited effective bactericidal activity, obviating the need for any treatment of the feedwater or external energy. The novel design and in situ incorporation of the membranes developed in this study present a proof-of-concept for realizing new, highly efficient, and environmental-friendly anti-biofouling membranes for water purification.

Advancing Peptide-Based Biorecognition Elements for Biosensors Using in-Silico Evolution.

Sensors for human health and performance monitoring require biological recognition elements (BREs) at device interfaces for the detection of key molecular biomarkers that are measurable biological state indicators. BREs, including peptides, antibodies, and nucleic acids, bind to biomarkers in the vicinity of the sensor surface to create a signal proportional to the biomarker concentration. The discovery of BREs with the required sensitivity and selectivity to bind biomarkers at low concentrations remains a fundamental challenge. In this study, we describe an in-silico approach to evolve higher sensitivity peptide-based BREs for the detection of cardiac event marker protein troponin I (cTnI) from a previously identified BRE as the parental affinity peptide. The P2 affinity peptide, evolved using our in-silico method, was found to have ∼16-fold higher affinity compared to the parent BRE and ∼10 fM (0.23 pg/mL) limit of detection. The approach described here can be applied towards designing BREs for other biomarkers for human health monitoring.

Catalytically Active Bacterial Nanocellulose-Based Ultrafiltration Membrane.

Large quantities of highly toxic organic dyes in industrial wastewater is a persistent challenge in wastewater treatment processes. Here, for highly efficient wastewater treatment, a novel membrane based on bacterial nanocellulose (BNC) loaded with graphene oxide (GO) and palladium (Pd) nanoparticles is demonstrated. This Pd/GO/BNC membrane is realized through the in situ incorporation of GO flakes into BNC matrix during its growth followed by the in situ formation of palladium nanoparticles. The Pd/GO/BNC membrane exhibits highly efficient methylene orange (MO) degradation during filtration (up to 99.3% over a wide range of MO concentrations, pH, and multiple cycles of reuse). Multiple contaminants (a cocktail of 4-nitrophenol, methylene blue, and rhodamine 6G) can also be effectively treated by Pd/GO/BNC membrane simultaneously during filtration. Furthermore, the Pd/GO/BNC membrane demonstrates stable flux (33.1 L m-2 h-1 ) under 58 psi over long duration. The novel and robust membrane demonstrated here is highly scalable and holds a great promise for wastewater treatment.

Metal-Organic Framework Encapsulation for the Preservation and Photothermal Enhancement of Enzyme Activity.

Interfacing biomolecules with functional materials is a key strategy toward achieving externally-triggered biological function. The rational integration of functional proteins, such as enzymes, with plasmonic nanostructures that exhibit unique optical properties such as photothermal effect provides a means to externally control the enzyme activity. However, due to the labile nature of enzymes, the photothermal effect of plasmonic nanostructures is mostly utilized for the enhancement of the biocatalytic activity of thermophilic enzymes. In order to extend and utilize the photothermal effect to a broader class of enzymes, a means to stabilize the immobilized active protein is essential. Inspired by biomineralization for the encapsulation of soft tissue within protective exteriors in nature, metal-organic framework is utilized to stabilize the enzyme. This strategy provides an effective route to enhance and externally modulate the biocatalytic activity of enzymes bound to functional nanostructures over a broad range of operating environments that are otherwise hostile to the biomolecules.

Extreme Mechanical Behavior of Nacre-Mimetic Graphene-Oxide and Silk Nanocomposites.

Biological materials have the ability to withstand extreme mechanical forces due to their unique multilevel hierarchical structure. Here, we fabricated a nacre-mimetic nanocomposite comprised of silk fibroin and graphene oxide that exhibits hybridized dynamic responses arising from alternating high-contrast mechanical properties of the components at the nanoscale. Dynamic mechanical behavior of these nanocomposites is assessed through a microscale ballistic characterization using a 7.6 µm diameter silica sphere moving at a speed of approximately 400 m/s. The volume fraction of graphene oxide in these composites is systematically varied from 0 to 32 vol % to quantify the dynamic effects correlating with the structural morphologies of the graphene oxide flakes. Specific penetration energy of the films rapidly increases as the distribution of graphene oxide flakes evolves from noninteracting, isolated sheets to a partially overlapping continuous sheet. The specific penetration energy of the nanocomposite at the highest graphene oxide content tested here is found to be significantly higher than that of Kevlar fabrics and close to that of pure multilayer graphene. This study evidently demonstrates that the morphologies of nanoscale constituents and their interactions are critical to realize scalable high-performance nanocomposites using typical nanomaterial constituents having finite dimensions.

Ultrarobust Biochips with Metal-Organic Framework Coating for Point-of-Care Diagnosis.

Most biosensors relying on antibodies as recognition elements fail in harsh environment conditions such as elevated temperatures, organic solvents, or proteases because of antibody denaturation, and require strict storage conditions with defined shelf life, thus limiting their applications in point-of-care and resource-limited settings. Here, a metal-organic framework (MOF) encapsulation is utilized to preserve the biofunctionality of antibodies conjugated to nanotransducers. This study investigates several parameters of MOF coating (including growth time, surface morphology, thickness, and precursor concentrations) that determine the preservation efficacy against different protein denaturing conditions in both dry and wet environments. A plasmonic biosensor based on gold nanorods as the nanotransducers is employed as a model biodiagnostic platform. The preservation efficacy attained through MOF encapsulation is compared to two other commonly employed materials (sucrose and silk fibroin). The results show that MOF coating outperforms sucrose and silk fibroin coatings under several harsh conditions including high temperature (80 °C), dimethylformamide, and protease solution, owing to complete encapsulation, stability in wet environment and ease of removal at point-of-use by the MOF. We believe this study will broaden the applicability of this universal approach for preserving different types of on-chip biodiagnostic reagents and biosensors/bioassays, thus extending the benefits of advanced diagnostic technologies in resource-limited settings.

Structure-dependent SERS activity of plasmonic nanorattles with built-in electromagnetic hotspots.

Hollow plasmonic nanostructures with built-in and accessible electromagnetic hotspots such as nanorattles, obtained through a galvanic replacement reaction, have received wide attention in chemical and biological sensing and targeted drug delivery. In this study, we investigate the surface enhanced Raman scattering (SERS) activity of plasmonic nanorattles obtained through different degrees of galvanic replacement of Au@Ag nanocubes. We found that the SERS efficacy of the nanorattles is governed by the plasmon extinction intensity, localized surface plasmon resonance (LSPR) wavelength of the nanostructures with respect to the excitation source and intensity of the electromagnetic field at the hotspot, with the latter playing a determining role. Finite-difference time-domain (FDTD) simulations showed excellent agreement with the experimental findings that an optimal degree of galvanic replacement is critical for maximum SERS enhancement. The rational design and synthesis of the plasmonic nanorattles based on these findings can make these nanostructures highly attractive for SERS-based chemical and biological sensing and bioimaging.

Effect of size and curvature on the enzyme activity of bionanoconjugates.

Biotic-abiotic hybrids comprised of globular proteins and functional nanostructures with complementary and synergistic properties are central to a number of bionanotechnological applications. A comprehensive understanding of the effect of physicochemical properties of abiotic nanostructures on the biological activity of the bionanoconjugates is critical in the design of these bio-nano hybrids. In this study, using size and curvature-controlled gold nanoparticles as a model abiotic system, we investigated the effect of hydrodynamic diameter and surface curvature on the activity of a model enzyme, horseradish peroxidase (HRP), adsorbed on the surface of the nanostructures. In contrast with the previous studies, we have employed a novel class of gold superstructures (gold nanoparticles on spheres) to deconvolute the effects of size and curvature on the catalytic activity of the bionanoconjugates. This study improves our understanding of the bio/nano interface and the design of bioinorganic hybrids with potential applications in biomimetic and bioenabled sensors, energy harvesting, optoelectronic components and devices, responsive and autonomous materials.

Bio-Optics and Bio-Inspired Optical Materials.

Through the use of the limited materials palette, optimally designed micro- and nanostructures, and tightly regulated processes, nature demonstrates exquisite control of light-matter interactions at various length scales. In fact, control of light-matter interactions is an important element in the evolutionary arms race and has led to highly engineered optical materials and systems. In this review, we present a detailed summary of various optical effects found in nature with a particular emphasis on the materials and optical design aspects responsible for their optical functionality. Using several representative examples, we discuss various optical phenomena, including absorption and transparency, diffraction, interference, reflection and antireflection, scattering, light harvesting, wave guiding and lensing, camouflage, and bioluminescence, that are responsible for the unique optical properties of materials and structures found in nature and biology. Great strides in understanding the design principles adapted by nature have led to a tremendous progress in realizing biomimetic and bioinspired optical materials and photonic devices. We discuss the various micro- and nanofabrication techniques that have been employed for realizing advanced biomimetic optical structures.

Influence of Surface Charge of the Nanostructures on the Biocatalytic Activity.

The physicochemical properties of abiotic nanostructures determine the structure and function of biological counterparts in biotic-abiotic nanohybrids. A comprehensive understanding of the interfacial interactions and the predictive capability of their structure and function is paramount for virtually all fields of bionanotechnology. In this study, using plasmonic nanostructures as a model abiotic system, we investigate the effect of the surface charge of nanostructures on the biocatalytic reaction kinetics of a bound enzyme. We found that the surface charge of nanostructures profoundly influences the structure, orientation, and activity of the bound enzyme. Furthermore, the interactions of the enzyme with nanoparticles result in stable conjugates that retain their functionality at elevated temperatures, unlike their free counterparts that lose their secondary structure and biocatalytic activity.

Wood-Graphene Oxide Composite for Highly Efficient Solar Steam Generation and Desalination.

Solar steam generation is a highly promising technology for harvesting solar energy, desalination and water purification. We introduce a novel bilayered structure composed of wood and graphene oxide (GO) for highly efficient solar steam generation. The GO layer deposited on the microporous wood provides broad optical absorption and high photothermal conversion resulting in rapid increase in the temperature at the liquid surface. On the other hand, wood serves as a thermal insulator to confine the photothermal heat to the evaporative surface and to facilitate the efficient transport of water from the bulk to the photothermally active space. Owing to the tailored bilayer structure and the optimal thermo-optical properties of the individual components, the wood-GO composite structure exhibited a solar thermal efficiency of ∼83% under simulated solar excitation at a power density of 12 kW/m2. The novel composite structure demonstrated here is highly scalable and cost-efficient, making it an attractive material for various applications involving large light absorption, photothermal conversion and heat localization.

Metal-Organic Framework as a Protective Coating for Biodiagnostic Chips.

Zeolitic imidazolate framework-8 (ZIF-8) grown around antibodies anchored to plasmonic nanostructures serves as a protective layer to preserve the biorecognition ability of antibodies stored at room and elevated temperatures for several days. The biofunctionality of the ZIF-8-protected biochip can be restored by a simple water-rinsing step, making it highly convenient for use in point-of-care and resource-limited settings.

PEGylated Artificial Antibodies: Plasmonic Biosensors with Improved Selectivity.

Molecular imprinting, which involves the formation of artificial recognition elements or cavities with complementary shape and chemical functionality to the target species, is a powerful method to overcome a number of limitations associated with natural antibodies. An important but often overlooked consideration in the design of artificial biorecognition elements based on molecular imprinting is the nonspecific binding of interfering species to noncavity regions of the imprinted polymer. Here, we demonstrate a universal method, namely, PEGylation of the noncavity regions of the imprinted polymer, to minimize the nonspecific binding and significantly enhance the selectivity of the molecular imprinted polymer for the target biomolecules. The nonspecific binding, as quantified by the localized surface plasmon resonance shift of imprinted plasmonic nanorattles upon exposure to common interfering proteins, was found to be more than 10 times lower compared to the non-PEGylated counterparts. The method demonstrated here can be broadly applied to a wide variety of functional monomers employed for molecular imprinting. The significantly higher selectivity of PEGylated molecular imprints takes biosensors based on these artificial biorecognition elements closer to real-world applications.

Bilayered Biofoam for Highly Efficient Solar Steam Generation.

A novel bilayered hybrid biofoam composed of a bacterial nanocellulose (BNC) layer and a reduced graphene oxide (RGO)-filled BNC layer is introduced for highly efficient solar steam generation. The biofoam exhibits a solar thermal efficiency of ≈83% under simulated solar illumination (10 kW m-2 ). The fabrication method introduced here is highly scalable and cost-efficient.