Morphology Observation of Two-Dimensional Monolayers of Model Proteins on Water Surface as Revealed by Dropping Method.

We have investigated the morphology of two-dimensional monolayers of gramicidin-D (GD) and alamethicin (Al) formed on the water surface by the dropping method (DM) using surface tension measurement (STm), Brewster angle microscopy (BAM), and atomic force microscopy (AFM). Dynamic light scattering (DLS) revealed that GD in alcoholic solutions formed a dimeric helical structure. According to the CD and NMR spectroscopies, GD molecules existed in dimer form in methanol and lipid membrane environments. The STm results and BAM images revealed that the GD dimer monolayer was in a liquid expanded (LE) state, whereas the Al monolayer was in a liquid condensed (LC) state. The limiting molecular area (A0) was 6.2 ± 0.5 nm2 for the GD-dimer and 3.6 ± 0.5 nm2 for the Al molecule. The AFM images also showed that the molecular long axes of both the GD-dimer and Al were horizontal to the water surface. The stability of each monolayer was confirmed by the time dependence of the surface pressure (π) observed using the STm method. The DM monolayer preparation method for GD-dimer and Al peptide molecules is a useful technique for revealing how the model biological membrane's components assemble in two dimensions on the water surface.

The Interaction between Anesthetic Isoflurane and Model-Biomembrane Monolayer Using Simultaneous Quartz Crystal Microbalance (QCM) and Quartz Crystal Impedance (QCI) Methods.

The interaction between anesthetic Isoflurane (Iso) and model-biomembrane on the water surface has been investigated using quartz crystal microbalance (QCM) and quartz crystal impedance (QCI) methods. The model-biomembranes used were dipalmitoyl phosphatidyl choline (DPPC), DPPC-palmitic acid (PA) mixture (DPPC:PA = 8:2), DPPC-Alamethicin (Al) mixture (DPPC:Al = 39:1), and DPPC-ß-Lactoglobulin (ßLG) mixture (DPPC:ßLG = 139:1) monolayers, respectively. The quartz crystal oscillator (QCO) was attached horizontally to each monolayer, and QCM and QCI measurements were performed simultaneously. It was found that Iso hydrate physisorbed on each monolayer/water interface from QCM and changed those interfacial viscosities from QCI. With an increase in Iso concentration, pure DPPC, DPPC-PA mixed, and DPPC-Al mixed monolayers showed a two-step process of Iso hydrate on both physisorption and viscosity, whereas it was a one-step for the DPPC-ßLG mixed monolayer. The viscosity change in the DPPC-ßLG mixed monolayer with the physisorption of Iso hydrate was much larger than that of other monolayers, in spite of the one-step process. From these results, the action mechanism of anesthetics and their relevance to the expression of anesthesia were discussed, based on the "release of interfacial hydrated water" hypothesis on the membrane/water interface.

Effect of Escherichia coli on phospholipid monolayers: surface tensiometry and Brewster angle microscopy measurements.

The effect of Escherichia coli (E. coli) cells on two phospholipids [dipalmitoyl phosphatidylcholine (DPPC) and dimyristoyl phosphatidylcholine (DMPC)] monolayers at the surface of a 1.5 wt% NaCl salt solution has been investigated using surface tension measurement and Brewster angle microscopy. The results showed that a DPPC monolayer that has an elastic structure was changed in morphology by interaction with E. coli cells, whereas a DMPC monolayer that has an expandable structure did not change in morphology. In particular, the morphology changed significantly around the liquid-expanded (LE)-liquid-condensed (LC) phase transition point for the DPPC monolayer. It was found that the LE-LC phase transition range in a DPPC monolayer was sensitive to influence from the outside of the monolayer such as the action of E. coli cells. Such a monolayer has the potential for application as a membrane sensor for detecting a small amount of bacteria in a short time.

Application of peptide gemini surfactants as novel solubilization surfactants for photosystems I and II of cyanobacteria.

We designed novel peptide gemini surfactants (PG-surfactants), DKDKC12K and DKDKC12D, which can solubilize Photosystem I (PSI) of Thermosynecoccus elongatus and Photosystem II (PSII) of Thermosynecoccus vulcanus in an aqueous buffer solution. To assess the detailed effects of PG-surfactants on the original supramolecular membrane protein complexes and functions of PSI and PSII, we applied the surfactant exchange method to the isolated PSI and PSII. Spectroscopic properties, light-induced electron transfer activity, and dynamic light scattering measurements showed that PSI and PSII could be solubilized not only with retention of the original supramolecular protein complexes and functions but also without forming aggregates. Furthermore, measurement of the lifetime of light-induced charge-separation state in PSI revealed that both surfactants, especially DKDKC12D, displayed slight improvement against thermal denaturation below 60 °C compared with that using ß-DDM. This degree of improvement in thermal resistance still seems low, implying that the peptide moieties did not interact directly with membrane protein surfaces. By conjugating an electron mediator such as methyl viologen (MV(2+)) to DKDKC12K (denoted MV-DKDKC12K), we obtained derivatives that can trap the generated reductive electrons from the light-irradiated PSI. After immobilization onto an indium tin oxide electrode, a cathodic photocurrent from the electrode to the PSI/MV-DKDKC12K conjugate was observed in response to the interval of light irradiation. These findings indicate that the PG-surfactants DKDKC12K and DKDKC12D provide not only a new class of solubilization surfactants but also insights into designing other derivatives that confer new functions on PSI and PSII.

Creation of cross-linked bilayer membranes that can incorporate membrane proteins from oligo-Asp-based peptide gemini surfactants.

We designed novel bilayer-forming amphiphiles based on the cyclic oligo-Asp-based peptide gemini (PG) surfactants cr-D2C12 and cr-D3C12, which consist of -Cys(Asp)nCys- (n = 2 or 3) as a core peptide and two Cys residues containing a dodecylamidomethyl group. Dynamic light scattering and transmission electron microscopy measurements revealed the formation of spherical bilayer membranes that could incorporate the light-harvesting antenna complex 2 (LH2) from Rhodopseudomonas acidophila . Furthermore, this proteoliposome-like conjugate could be assembled onto cationized glass and mica to form planar bilayer membranes incorporating LH2. Using atomic force microscopy, we observed LH2 protruding (ca. 1.2-1.5 nm) from flat terraces of the planar bilayer membranes formed from cr-D2C12 or cr-D3C12. Thus, our designed PG surfactants are a new class of bilayer-forming amphiphiles that may be applied to the study of various membrane proteins.

A linear chain of water molecules accommodated in a macrocyclic nanotube channel.

A macrocyclic tetramer of 2-phenyl-1,3,4-oxadiazole was synthesized, and its self-assembly was investigated. The macrocycle was stacked to form a one-dimensional (1D) columnar structure containing water molecules. The nanotube self-assembled into a bundle, which grew into a molecular wire. The association of the water molecules in the tubular cavity resulted in shielding of the 1D chain of water molecules by the nanotube; these macrocyclic nanotube channels are promising candidates for nanotechnological applications.

Synthesis and properties of BF2 complexes to dihydroxydiones of tetracene and perylene: novel electron acceptors showing n-type semiconducting behavior.

BF(2) complexes containing tetracene and perylene moieties were synthesized as new types of electron-deficient arene compounds. These compounds exhibit long wavelength absorption and high electron affinities, as revealed through spectral and electrochemical studies, due to their quadrupolar structures represented by resonance contributors. The BF(2) complex containing tetracene exhibits an n-type semiconducting behavior. These compounds are new types of electron acceptors functionalized by BF(2) chelation.

Temperature dependence of thermodynamic activity in volatile anesthetics: correlation between anesthetic potency and activity.

Temperature dependence of the saturated concentration and the activity coefficient of anesthetics (1-propanol, diethyl ether, chloroform, and halothane) in water were evaluated using vapor pressure and H NMR measurement. We found that these physical values (quantities) correlate with anesthetic potencies estimated according to the thermodynamic equilibrium model. The anesthetic potency for hydrophilic anesthetic (diethyl ether) decreased with decreasing temperature because of the temperature specificity of this saturated concentration. In contrast, potencies of hydrophobic anesthetics (chloroform and halothane) increased with decreasing temperature because of the temperature specificity of those activity coefficients. By assuming that anesthetics interact with hydrated water of cell membranes, the temperature dependence of anesthetic potencies in vivo is qualitatively explicable.

Action mechanism of water soluble ethanol on phospholipid monolayers using a quartz crystal oscillator.

Interaction between phospholipid monolayers (dihexadecyl phosphate: DHP, dipalmitoyl phosphatidyl choline: DPPC) and water soluble ethanol has been studied using quartz crystal microbalance (QCM) method and quartz crystal impedance (QCI) method. The quartz crystal oscillator was attached horizontally on the DHP and DPPC monolayers that were formed on the water surface. At low concentration, increased ethanol concentration decreased the frequency for QCM and increased the resistance for QCI. Both frequency and resistance approached asymptotically to a saturation value. A further increase in ethanol concentration induced a sudden and discontinuous linear change (a decrease in frequency and an increase in resistance). Based on these results, we propose the following action mechanism of ethanol on phospholipid monolayers: at low concentration, the ethanol hydrates adsorb into the monolayer/water interface and saturate on the interface. The monolayer viscosity also increases with the adsorption of hydrates. A further increase in concentration causes multilayer formation of hydrates and/or penetration of hydrates into the monolayer core. The viscosity of the interfacial layer (monolayer and interfacial structured water) changes dramatically according to the action of ethanol hydrates.