Activation of glycosyl methylpropiolates by TfOH.

Activation of glycosyl methylpropiolates by TfOH was investigated. Armed and superarmed glycosyl donors can be activated by use of 0.2 equivalent TfOH whereas 1.0 equivalent of TfOH was required for the activation of the disarmed glycosyl donors. All the glycosidations gave very good yields. The method is suitable for synthesis of glycosides and disaccharides and it may result in the hydrolysis of the interglycosidic bond if the sugar at the non-reducing end is armed or superarmed. These problems are not seen when gold-catalyzed activation procedures are invoked for the activation of glycosyl alkynoates.

Photocatalyzed Amination of Alkyl Halides to Access Primary Amines.

We demonstrate that oxime ester derivatives can be used as both a halogen atom transfer (XAT) agent and an imine source under photocatalytic conditions, allowing the radical amination of alkyl halides, resulting in the formation of a broad scope of imines. Hydrolysis of the latter gives direct access to the corresponding primary amines. Mechanistically, the reaction is believed to proceed through the formation of aryl radical intermediates, which are responsible for the activation of alkyl halides via XAT.

Copper-Catalyzed Regio- and Stereoselective Hydrothiolation of Allenamides, Enamides, and Ynamides.

We report a simple protocol for the copper-catalyzed hydrothiolation of N-unsaturated precursors, i.e., allenamides, enamides, and ynamides, under mild conditions. This method proceeds with a low loading of a commercially available Cu(CH3CN)4PF6 catalyst and enables the room-temperature transformation of a wide range of aromatic and aliphatic thiols into allylic or vinylic thioethers, 1,3-dithioethers, and thioaminals with good regio- and stereoselectivity.

Photo-Induced Halogen-Atom Transfer: Generation of Halide Radicals for Selective Hydrohalogenation Reactions.

The first photo-mediated process enabling the generation of halide radicals by Halogen-Atom Transfer (XAT) is described. Contrary to radical transformations involving XAT reactivity, which exploit stable carbon radicals, this unique approach uses 1,2-dihaloethanes for the generation of unstable carbon radicals by XAT. These transient radicals then undergo ß-scission with release of ethylene and formation of more stable halide radicals which have been used in selective hydrohalogenations of a large number of unsaturated hydrocarbons, including Michael acceptors, unactivated alkenes and alkynes. This hydrohalogenation is tolerant of a broad range of functionalities and is believed to proceed through a radical-chain manifold that propagates by the use of silane derivatives.

Synergistic Copper/Enamine Catalysis for the Regio-, Stereo-, and Enantioselective Intermolecular α-Addition of Aldehydes to Allenamides.

We herein describe an intermolecular enantioselective α-addition of aldehydes to allenamides using a dual copper/enamine catalytic system. Highly enantioselective addition of aldehydes was obtained thanks to secondary amine catalysts. The process was found to be highly regio-, stereo-, and enantioselective under mild conditions.

Easy Access to Allylic Sulfones Through Transition-Metal-Free Hydrosulfonylation Of Allenes.

A Brønsted acid-mediated addition of (hetero)aryl and (cyclo)alkyl sodium sulfinates to N-allenyl derivatives, which proceeds in water, is described under very smooth conditions. This reaction provided a practical and efficient protocol for the regio- and stereoselective synthesis of allylic sulfones in an atom- and step-economic fashion.

Visible-Light Decatungstate/Disulfide Dual Catalysis for the Hydro-Functionalization of Styrenes.

We describe an efficient photoredox system, relying on decatungstate/disulfide catalysts, for the hydrofunctionalization of styrenes. In this methodology the use of disulfide as a cocatalyst was shown to be crucial for the reaction efficiency. This photoredox system was employed for the hydro-carbamoylation, -acylation, -alkylation, and -silylation of styrenes, giving access to a large variety of useful building blocks and high-value molecules such as amides and unsymmetrical ketones from simple starting materials.

Tuning the Regioselective Functionalization of Trifluoromethylated Dienes via Lanthanum-Mediated Single C-F Bond Activation.

The development of new fluorine-containing building blocks and their efficient synthetic access is currently a challenging research field. Herein, the highly regio- and stereoselective addition of a large range of aldehydes onto trifluoromethylated benzofulvenes was achieved using a simple La/I2 /DIBAL-Cl system via a selective C-F bond activation process. This versatile methodology provided homodienyl alcohols bearing a terminal CF2 -alkene with potential further applications, as shown by the dehydration to the first benzofulvenes carrying a difluorovinyl group. In addition, for certain electron-poor aldehydes, unprecedented ipso substitution of the CF3 group in a diene was observed, which, according to DFT studies, is related to the presence of the large, Lewis-acidic lanthanum metal.

Metal-Catalyzed Intermolecular Hydrofunctionalization of Allenes: Easy Access to Allylic Structures via the Selective Formation of C-N, C-C, and C-O Bonds.

Following a strong regain of interest over the past 20 years in the chemistry of allenes, this "forgotten" family of unsaturated molecules is undergoing a renaissance. In this context, the metal-catalyzed hydrofunctionalization of allenes is nowadays one of the most studied transformations. The latter is of great interest because it opens a way to produce selectively functionalized allylic structures. These motifs are important in synthesis, particularly for the formation of asymmetric centers. Hydrofunctionalization of allenes is also a totally atom economical strategy, avoiding generation of any waste, to produce allylic functionalized structures. Compared to the main pathway to obtain the latter (aka Tsuji-Trost allylic substitution), metal-catalyzed hydrofunctionalization does not require the prefunctionalization of starting material with a leaving group. This review presents a state of the art exploration of all existing transition metal-catalyzed methods allowing the selective intermolecular hydrofunctionalization of allenes with N-H, C-H, and O-H nucleophiles or electrophiles.

Copper-Catalyzed Hydrocarboxylation of N-Allenyl Derivatives.

The addition of carboxylic acids to allenes was performed with copper catalysis. This hydrocarboxylation reaction, occurring on the terminal carbon of the allenes, is totally regio- and stereoselective. It represents the first copper-catalyzed example of intermolecular C-O bond formation by allene hydrofunctionalization. This ligand-free system is based on the use of catalytic amounts of copper combined with a base (10 mol % of K2CO3).

Transition-Metal-Free α-Vinylation of Enolizable Ketones with ß-Bromostyrenes.

An α-vinylation of enolizable ketones has been developed by using ß-bromostyrenes and a KO tBu/NMP system. ß,γ-Unsaturated ketones of E configuration were obtained in excellent yield and selectivity. Further synthetic possibilities are highlighted by one-pot functionalization via trapping of intermediate dienolates with alkyl, allyl, benzyl, and propargyl halides to generate quaternary centers. The reported transformation is believed to involve phenylacetylene and propargylic alcohol derivatives.

Aerobic and Ligand-Free Manganese-Catalyzed Homocoupling of Arenes or Aryl Halides via in Situ Formation of Aryllithiums.

Ligand-free manganese-catalyzed homocoupling of arenes or aryl halides can be carried out under aerobic conditions via the in situ formation of the corresponding aryllithiums. A wide range of biaryls and derivatives has been obtained, and a mechanism involving monomeric manganese-oxo complexes has been proposed on the basis of DFT calculations.

Transition-Metal-Free Synthesis of Biarylmethanes from Aryl Iodides and Benzylic Ketones.

An original metal-free procedure for the synthesis of biarylmethanes is disclosed herein. The reactions occur with high selectivity starting from aryl iodides and benzylic ketones in the presence of superbasic media (CsOH/DMSO). This procedure allows a straightforward access to a wide range of biarylmethane derivatives substituted with electron-withdrawing and -donating substituents.

Application of Elemental Lanthanides in the Selective C-F Activation of Trifluoromethylated Benzofulvenes Providing Access to Various Difluoroalkenes.

The selective activation of one carbon-fluorine bond in polyfluorinated aromatic molecules or in trifluoromethyl-containing substrates offers the possibility of accessing unique fluorine-containing molecules, which are difficult to obtain by other synthetic pathways. Among various metals, which can undergo C-F activation, lanthanides (Ln) are good candidates as they form strong Ln-F bonds. Lanthanide metals are strong reducing agents with a redox potential Ln3+/Ln of approximately -2.3 V, which is comparable to the value of the Mg2+/Mg redox couple. In addition, lanthanide metals display a promising functional group tolerance and their reactivity can vary along the lanthanide series, making them suitable reagents for fine-tuning reaction conditions in organic and organometallic transformations. However, due to their oxophilicity, lanthanides react readily with oxygen and water and therefore require special conditions for storage, handling, preparation, and activation. These factors have limited a more widespread use in organic synthesis. We herein present how dysprosium metal - and by analogy all lanthanide metals - can be freshly prepared under anhydrous conditions using glovebox and Schlenk techniques. The freshly filed metal, in combination with aluminum chloride, initiates the selective C-F activation in trifluoromethylated benzofulvenes. The resulting reaction intermediates react with nitroalkenes to obtain a new family of difluoroalkenes.

Regio- and Stereoselective Copper-Catalyzed Allylation of 1,3-Dicarbonyl Compounds with Terminal Allenes.

Simple ligand-free copper systems were found as efficient catalysts for the addition of 1,3-dicarbonyl compounds to N-allenyl derivatives. This highly regio- and stereoselective reaction has been accomplished in the presence of malonates, 1,3-ketoesters, and 1,3-diketones with good to excellent yields under mild conditions. This methodology represents the first allylation of 1,3-dicarbonyl compounds with allenes catalyzed by copper.

From Ruthenium to Copper: A la carte Tools for the Synthesis of Molecules of Interest.

Well-defined ruthenium complexes and simple copper-ligand systems proved to be powerful catalysts for the construction of complex molecules from simple and abundant organic sources. In this account, chosen examples of reactions involving C-C bond formation catalyzed by [Ru(η(5)-C(5)H(5))-(CH(3)CN)(3)][PF(6)] will be presented. A practical synthesis of the versatile catalyst [Ru(η(5)-C(5)H(5))-(CH(3)CN)(3)][PF(6)] is also described via a simple and easy-handled procedure discovered in Geneva ten years ago. The second part of this review is focused on methodologies catalyzed by an association of a copper salt and a simple ligand for the formation of C-N, C-O and C-C bonds developed in our group in Montpellier. A brief overview of applications in life sciences and materials will conclude this article.

Copper-Catalyzed Hydroamination of Terminal Allenes.

The ligand-free copper-catalyzed hydroamination of allenes has been accomplished in the presence of cyclic secondary amines or anilines derivatives. This novel methodology undergoes the selective generation of (E)-allylamines under smooth conditions with total regio- and stereoselectivity.

Copper-Catalyzed Insertion into Heteroatom-Hydrogen Bonds with Trifluorodiazoalkanes.

Copper-catalyzed Si-H, B-H, P-H, S-H, and N-H insertion reactions of 2,2,2-trifluoro-1-diazoethane and 1-aryl 2,2,2-trifluorodiazoethanes generated a large number of new fluorine-containing chemical entities for medicinal chemists. With selected Si-H and B-H insertion reactions, we demonstrate successful extension to asymmetric catalysis.

Transition-Metal-Free α-Arylation of Enolizable Aryl Ketones and Mechanistic Evidence for a Radical Process.

The α-arylation of enolizable aryl ketones can be carried out with aryl halides under transition-metal-free conditions using KOtBu in DMF. The α-aryl ketones thus obtained can be used for step- and cost-economic syntheses of fused heterocycles and Tamoxifen. Mechanistic studies demonstrate the synergetic role of base and solvent for the initiation of the radical process.

Hydroamination of terminal alkynes with secondary amines catalyzed by copper: regioselective access to amines.

A simple and convenient copper-catalyzed hydroamination of arylacetylenes with secondary amines has been performed giving a simple access to aliphatic amines after reduction of the hydroaminated products (E-enamines). Here we described a mild catalytic system utilizing CuCN precatalyst without any additive ligands in a solvent-free system.