Effects of rehabilitation treatments jointly considered by physiatrists and rehabilitation therapists in patients with severe burn injury.

Rehabilitation treatments for patients with severe burn injury (SBI) are difficult owing to the lack of knowledge, skills, and experience among clinicians and physical and occupational therapists, resulting in serious patient disability. This study retrospectively evaluated the effectiveness of rehabilitation treatments jointly considered by physiatrists and rehabilitation therapists (Physiatrist and Registered therapist Operating rehabilitation: PROr) for patients with SBI admitted to our hospital's burn intensive care unit (BICU). Eligible patients were classified into the PROr and standard rehabilitation (SR) groups. Contents of the rehabilitation program in the BICU, the functional ambulation categories (FAC), and the Barthel index at the first rehabilitation, BICU discharge, and hospital discharge were collected. Of the 184 patients with severe burns admitted to the BICU, 29 (PROr group, n = 16; SR group, n = 13) met the eligibility criteria. The PROr group received more types of exercise interventions for a longer time than the SR group. No significant differences in the FAC and Barthel index scores at the first time of rehabilitation were found between the two groups; however, the scores of FAC and Barthel index at BICU and hospital discharges were higher in the PROr group than in the SR group. The PROr program may help in the functional improvement of patients with SBI.

Morphology of the Radial Attachment of the Radioulnar Ligament and Surrounding Landmarks.

PURPOSE: The triangular fibrocartilage complex (TFCC) is composed of dorsal and palmar radioulnar ligaments (RULs). A common injury pattern of the RUL is the avulsion of the ulnar insertion, which can be treated by arthroscopic or open repair. Although the general method of TFCC reconstruction is a tendon graft with a bone tunnel, detailed information regarding the radial attachment of the RUL is unclear. This study aimed to clarify the morphology of the radial attachments of the palmar radioulnar ligament (PRUL), dorsal radioulnar ligament (DRUL), and short radiolunate ligament (SRL) using three-dimensional imaging. METHODS: A total of 29 upper limbs (16 formalin-fixed and 13 embalmed by Thiel's embalming method) of Japanese cadavers were used. After gross observation, we marked the attachments of the PRUL, DRUL, and SRL using 0.7-mm diameter pins. We created three-dimensional images of the radius, outlining the PRUL, DRUL, and SRL attachments. The software application calculated the centers of the PRUL and DRUL attachments. RESULTS: The PRUL attachment was horizontally shaped. The center of the PRUL was 1.5 mm proximal and 5.8 mm radial to the tip of the palmar pyramid formed by the palmar cortex and the radioulnar and radiocarpal joint surfaces. The DRUL attachment was vertically shaped. The center of the DRUL was 2.0 mm proximal and 1.7 mm radial from the tip of the dorsal pyramid formed by the dorsal cortex and the radioulnar and radiocarpal joint surfaces. The length of the SRL was 9.2 mm. The SRL and PRUL were strongly conjoined. CONCLUSIONS: The anatomical center on the RUL attachment of the radius can be determined from osseous landmarks. CLINICAL RELEVANCE: The findings of this study contribute to the understanding of RUL attachment to the distal radius and may assist surgeons in performing anatomical reconstruction of TFCC.

Flexor tendon transfer for focal dystonia with involuntary flexion of the ring finger.

We report a case of task-specific dystonia characterized by involuntary flexion of the ring finger. After resecting the flexor of the ring finger, the flexor digitorum profundus of the middle finger was transferred to the resected site.

Clinical relevance of leukocyte-associated endotoxins measured by semi-automatic synthetic luminescent substrate method.

A newly developed semi-automatic synthetic luminescence substrate (SALS) method for measuring endotoxin was compared with the existing turbidimetric kinetic assay (TKA) using leukocyte-rich plasma to verify its usefulness. As a result, the endotoxin levels by this method were higher than that by the existing assay in most specimens, and the time required for measurement was much shorter. In addition, the leukocyte-rich plasma endotoxin level minus the plasma endotoxin levels were named leukocyte-associated endotoxin, and these levels per one leukocyte were compared. As a result, those levels were highly correlated with the endotoxin measurement levels of leukocyte-rich plasma. The correlation coefficient of SALS method was superior to the existing TKA method, the endotoxin level by this method may be close to true endotoxin levels.

Load Distribution in Dorsally-Angulated Distal Radius Deformity Using Finite Element Analysis.

PURPOSE: The load axis of the carpals is located on the volar side of the normal distal radius. A volar lunate facet fracture (VLFF) is exposed to volar-shearing stress, which can cause volar displacement of the carpus. A previous biomechanical study reported that the load at the scaphoid fossa was located more dorsally and the pressure at the lunate fossa decreased in a dorsally-angulated model. However, the distal radius load distribution for various volar tilts remains unclear. We speculate that if the volar tilt decreases, the load distribution moves dorsally and decreases the stress on the VLFF. Therefore, we analyzed a dorsally-angulated distal radius model to evaluate changes in the load distribution using finite element analysis. METHODS: A 3-dimensional finite element wrist model was developed using computed tomography images. The ligaments were modeled as tension-only spring elements. We considered the intact wrist model for a volar tilt of 15° and created 5 additional models for volar tilts of 10°, 5°, 0°, -5°, and -10°. RESULTS: As the dorsal angulation increased, the stress distribution moved from volar to dorsal and from the lunate fossa toward the scaphoid fossa. The maximum stress on the volar lunate facet was reduced as volar tilt decreased. The maximum stress was higher on the lunate fossa for volar tilts from 15° to 5°. In contrast, the maximum stress was higher on the scaphoid fossa for volar tilts of ≤0°. CONCLUSIONS: Load transmission moved from volar to dorsal and from the lunate fossa to the scaphoid fossa when the volar tilt decreased. Therefore, a decrease in the volar tilt would reduce the load on the VLFF. CLINICAL RELEVANCE: This study provides surgeons accurate knowledge regarding load distribution of the distal radius for various volar tilts that could be helpful in treating patients with VLFFs.

Development of a newly immunoassay specific for mouse presepsin (sCD14-ST).

Presepsin (sCD14-ST) is used as a marker for sepsis diagnosis. The production mechanism of presepsin is unique in that it is produced through phagocytosis of microorganisms. However, some studies have demonstrated that non-infected patients had increased presepsin levels and that presepsin is related to the risk or severity of diseases. This study was designed to describe a sensitive sandwich enzyme-linked immunosorbent assay for mouse presepsin developed to investigate the association of presepsin with diseases. Polyclonal antibodies were generated from peptide-immunized rabbit antiserum. Mouse presepsin standard was prepared using the recombinant method as an Fc-fusion protein. The linear detection range of the method was 4.7-300 pg/mL with a detection limit of 1.4 pg/mL. The assay detected mouse presepsin where mouse soluble CD14 (sCD14) was digested by cathepsin D proteinase and the cross-reactivity of sCD14 was not observed. The normal levels of mouse presepsin and sCD14 were compared; 65.9 ± 21.4 pg/mL and 43.2 ± 7.2 ng/mL were determined, respectively. Moreover, the levels of presepsin and sCD14 were compared with a lipopolysaccharide (LPS)-injected sepsis mouse model. The newly developed analytical method had high specificity to presepsin and is an efficient tool for studying the association between presepsin and diseases.

Radiographic study of the distal ulna in rheumatoid arthritis with extensor digitorum communis ruptures.

OBJECTIVES: Extensor digitorum communis rupture of the wrist often occurs in patients with rheumatoid arthritis. Early operation is desirable for patients with a high risk of rupture; therefore, rheumatologists should diagnose it during daily examinations. This study aimed to clarify radiographic changes in the distal ulna and related factors associated with extensor digitorum communis rupture in patients with rheumatoid arthritis. METHODS: We analysed plain radiographs of 40 patients with rheumatoid arthritis associated with extensor digitorum communis rupture and 62 healthy controls. We investigated the deformation of the distal ulna, Larsen grades, and radiological parameters such as ulnar variance, ulnar bowing angle, dorsal protrusion, and dorsal bowing angle. RESULTS: The ratios of the ulna head deformation, Larsen grades, ulnar variance, dorsal protrusion, and dorsal bowing angle were significantly larger in the ruptured group than in the control group. Multiple logistic regression analysis revealed that dorsal protrusion and Larsen grades were significantly associated with extensor digitorum communis rupture. CONCLUSIONS: Deformity of the distal ulna is evident in patients with an extensor digitorum communis rupture. Ulnar head deformation, high Larsen grades, and large dorsal protrusion are potential risk factors for extensor digitorum communis rupture.

Three-dimensional imaging of the distal radius with reference to volar locking plate surgery.

BACKGROUND: The watershed line is widely accepted as the distal limit of the volar locking plate (VLP); however, the VLP placement could vary depending on the plate contour and morphology of the distal radius. The aim of this study was to investigate the morphology of the distal radius and VLP fitting using 3D images. HYPOTHESIS: We hypothesized that attachment of the VLP would affect the contour of the volar prominence of the distal radius. PATIENTS AND METHODS: Variable-angle LCP two-column volar distal radius Plate 2.4 and 16 formalin-fixed cadavers were studied. The plate and forearm were scanned using a computed tomography scanner. The plate was fixed to the radial shaft in the most distal position without flexor pollicis longus tendon contact. Postero-antero and lateral radiographs were obtained using fluoroscopy. Postero-antero radiographs were superimposed on a 3D image of the distal radius. The virtual plate was attached to the distal radius in the computer simulations and the plate was adjusted in the sagittal plane. In the postero-antero radiographs, the distance between the plate and distal end of the radius (DPR) was measured. In the sagittal plane, the height of the volar lunate facet (VLF) and the plate-to-bone distance of each locking screw hole was measured. The volar cortical angle (VCA) was measured as the angle formed by a line drawn along the volar surface and a line drawn on the radial shaft on the sagittal plane at each locking screw plane. RESULTS: A significant correlation was observed between the height of the VLF and the DPR and between the height of the VLF and the VCA. The plate-to-bone distance at the ulnar screw hole was significantly smaller than that of the other screw holes. DISCUSSION: Our study revealed that the higher the VLF, the more proximal is the VLP. The plate fits on the bone surface at the ulnar side, whereas the radial side has more space between the plate and bone. LEVEL OF EVIDENCE: III, diagnostic Level.

Lemierre's syndrome with isolated external jugular vein thrombosis caused by Streptococcus intermedius.

An 85-year-old woman with a history of rheumatoid arthritis fell due to unsteadiness and visited our emergency room due to head injury. The patient had minor head trauma and lip and oral cavity injuries, and she presented with fever. Laboratory tests showed high inflammatory marker levels. Moreover, there were indicative of urinary tract infection. Thus, the patient was admitted to our hospital. Blood cultures performed upon admission revealed the presence of Streptococcus intermedius, and contrast-enhanced computed tomography scan showed solitary right external jugular vein thrombosis and multiple abscesses in both lungs. Hence, the patient was diagnosed with Lemierre's syndrome, and antimicrobial agents and anticoagulants were administered. The patient developed left pleurisy due to inflammation caused by lung abscesses, which improved with thoracic drainage. Her condition improved satisfactorily, and she was then discharged. There are only few studies about Lemierre's syndrome caused by S. intermedius and even lesser cases involving external jugular vein thrombosis. Herein, we report a relatively rare case of Lemierre's syndrome with isolated external jugular vein thrombosis.

Fractures of the proximal segments of the pediatric distal radial metaphysis exhibit less angular stability than fractures of the distal segments.

The distal part of the forearm is divided into the physis, metaphysis, diaphyseal metaphyseal junction (DMJ) and diaphysis. The treatment of radial DMJ fractures is challenging because this region has diaphyseal characteristics. We speculated that the stability of metaphyseal fractures could vary depending on their proximity to the DMJ or physis. Our study aimed to investigate the stability of pediatric distal radius fractures in the physis, metaphysis and DMJ. Ninety-five patients were classified into three groups: group D, fracture line located within 1/2 of the width of the radius (WOR) from the physis; group M, fracture line located between 1/2 and 1 WOR from the physis; and group P, fracture line located between 1 and 2 WOR from the physis. We measured sagittal angulation and coronal angulation. A correction loss of less than 9° was defined as a 'stable reduction' outcome and one greater than 10° as a 'loss of reduction' outcome. The correction losses for sagittal angulation were significantly greater in groups M and P than in group D. The correction losses for coronal angulation were significantly greater in group P than in groups D and M. The incidence of 'loss of reduction' outcomes was significantly higher in groups M and P than in group D. The proximal segments of distal radial metaphyseal and DMJ fractures showed less angular stability than distal segments.

Radiographic changes in the distal ulna in non-rheumatoid patients with extensor digitorum communis ruptures.

INTRODUCTION: Osteoarthritis of the distal radioulnar joint (DRUJ) is relatively common in elderly people. Extensor digitorum communis (EDC) ruptures occasionally and occurs with or without prior signs in these people. The purpose of this study was to clarify the radiographic changes in the distal ulna associated with EDC rupture. MATERIALS AND METHODS: We analyzed plain radiographs of 71 patients with non-rheumatoid arthritis and 40 controls. Radiographic changes in the distal ulna were categorized into normal, osteoarthritic-change (OA-change), and taper. We measured the ulnar variance (UV) and ulnar bowing angle in the posteroanterior radiographs and the dorsal bowing angle (DBA) and dorsal protrusion (DP) in the lateral radiographs. The shape of the sigmoid notch (SN) was categorized into flat, radial inclination, and dimple. The primary outcome was a comparison of radiographic parameters between the patient and the control groups. The secondary outcome was an analysis of the type of SN to investigate factors affecting ulnar deformation. RESULTS: The ratio of the radiographic change in the ulna, UV, DBA, and DP was significantly larger in the patient group than in the control group. Patients with the radial inclination type of SN showed a greater UV than those with the dimple type. CONCLUSIONS: Deformation of the distal ulna, a large UV, dorsal penetration, and dorsal bowing was related to EDC rupture. Regarding the large UV, the lunate shaved the upper half of the distal ulna, whereas the DRUJ shaved the lower half. These processes formed a tapered ulna head. A large UV and an inclination of the DRUJ played a role in ulnar head deformation.

Basic Verification of ß-D Glucan in Leukocyte-Rich Plasma for the Diagnosis of Deep Mycosis.

BACKGROUND: Currently, supplementary serological testing for ß-D glucan (BDG) is often selected to diagnose deep mycosis in care covered by the health insurance in Japan. The Wako method used by our center has low sensitivity, and different studies have used different cut-off values due to factors that cause false positives and false negatives. One possible cause of false negatives is the use of platelet-rich plasma (PRP) as the sample material. Because phagocytic white blood cells (WBC) are precipitated by centrifugation and only plasma is measured, it seems unlikely that the actual amount of BDG is being measured when using PRP. Further, a frequent cause of false positives is contamination from blood products and gauze containing BDG. To resolve these issues, the blood cell separator, hydroxyethyl starch, is used to precipitate only the red blood cells to obtain leukocyte-rich plasma (LRP). We hypothesized that it might be possible to improve the diagnostic rate of deep mycosis by measuring the BDG content of plasma containing WBC and fungal components and by comparing the BDG content of PRP and LRP measured simultaneously. MATERIALS AND METHODS: Healthy human blood, albumin-added blood, wrung-out gauze fluid-added blood, and fungal solution-added blood were prepared, and PRP and LRP were prepared using hydroxyethyl starch. The BDG content of each sample was measured using the Wako method and compared. In addition, PRP and LRP of fungal-added blood were Gram-stained and examined under a microscope, and the number of WBCs and phagocytosed fungi was counted visually and compared. RESULTS: Measuring the BDG content of LRP confirmed that there were no false positives with LRP, and in vitro experiments comparing albumin-added false-positive blood to fungal-added blood showed significant differences between PRP and LRP only in the fungal-added blood. CONCLUSION: Calculating the BDG-ratio (LRP/PRP) by measuring both LRP and PRP may eliminate false positives and false negatives of true deep mycosis and improve the diagnostic rate.

Auto-brewery syndrome caused by oral fungi and periodontal disease bacteria.

BACKGROUND: Auto-brewery syndrome (ABS) is often caused by fungi in the intestinal tract. We describe a rare case of alcohol production by Candida albicans and periodontal disease bacteria in the oral cavity. CASE PRESENTATION: A man aged in his 60s had a car accident, and alcohol was detected on his breath. At the time, he exhibited alcohol overdose seizures with no alcohol consumption. We carried out a gastrointestinal endoscopy, detected esophageal candidiasis, and diagnosed ABS. His seizures continued despite using miconazole oral gel. Significant tooth decay, periodontal disease, and high C. albicans levels were observed in his oral cavity. Alcohol production was confirmed from periodontal bacteria and C. albicans cultures and alcohol-degrading enzyme functions were poor. Dental treatment and antifungal drugs reduced seizures, and improved his fatty liver. CONCLUSION: Alcohol can be produced by microorganisms in healthy individuals. Therefore, blood alcohol levels and alcohol-degrading enzyme functions should be examined in patients with unexplained liver dysfunction.

Supraretinacular endoscopic carpal tunnel release: A safe alternative method for treatment of carpal tunnel syndrome.

PURPOSE: Supraretinacular endoscopic carpal tunnel release (SRECTR) is a technique in which an endoscope is inserted superficial to the flexor retinaculum through a subcutaneous tunnel. The benefits of this method include a clear view for the surgeon and absence of median nerve compression. Surgeons can operate with a familiar view of the flexor retinaculum and median nerve downward, similar to open surgery. This study aimed to investigate the learning curve for SRECTR, an alternate method for carpal tunnel release, and evaluate its complications and the functional outcomes using a disposable commercial kit. METHODS: We examined the open conversion rates and complications associated with SRECTR in 200 consecutive patients performed by two surgeons. We compared the operative time operated by a single surgeon. We evaluated outcomes in 191 patients according to Kelly's grading system. Patients' mean follow-up period was 12.7 months. RESULTS: Nine patients required conversion to open surgery. There were no injuries to the nerves and tendons and no hematoma or incomplete dissection of the flexor retinaculum. The operative times varied between 11 and 34 minutes. We obtained the following results based on Kelly's grading of outcomes: excellent in 116, good in 59, fair in 13, and poor in 3 patients. CONCLUSIONS: We found no patients with neurapraxia, major nerve injury, flexor tendon injury, superficial palmar arch injury, and hematoma. Although there was a learning curve associated with SRECTR, we performed 200 consecutive cases without neurovascular complications. This method may be a safe alternative to minimally invasive carpal tunnel surgery.

Morphology of the Ulnar Insertion of the Triangular Fibrocartilage Complex and Related Osseous Landmarks.

PURPOSE: In triangular fibrocartilage complex (TFCC) injuries, a foveal tear of the radioulnar ligament often requires surgery. Previous studies have suggested that surgeons should attach the TFCC to the center of the fovea. The TFCC and its insertion points are small structures, and few studies have reported details of the foveal insertion. This study aimed to clarify the morphology of the ulnar insertion of the TFCC and related osseous landmarks with 3-dimensional imaging. METHODS: This study used 26 formalin-fixed cadavers. At the ulna, the TFCC was inserted from the fovea to the middle part of the ulnar styloid. After gross observation of the TFCC, the ulnar insertion was outlined using a 1.0-mm drill. We then created 3-dimensional images of the ulna using computed tomography and marked (with software) an outline of the foveal insertion of the TFCC. We measured the area and the long and short diameters of the TFCC insertion. RESULTS: The area of the TFCC insertion was 34 mm2 and positively correlated with the height of the ulnar styloid and the area of the ulnar head. The TFCC's highest point was 58% of the ulnar styloid height. The center of the TFCC insertion was 1.3 mm ulnar and 0.6 mm dorsal from the lowest point of the ulnar surface. CONCLUSIONS: The center of the TFCC insertion was slightly ulnar of the lowest point of the ulnar surface. This study revealed the center, the area, and the osseous relation of the ulnar insertion of the TFCC. CLINICAL RELEVANCE: When surgeons repair a TFCC foveal tear, they can find the anatomical center of the ulnar insertion efficiently and easily based on its osseous relationship.

Antibody-mediated soluble CD14 stabilization prevents agitation-induced increases in presepsin levels in blood component specimens.

Presepsin is a 13-kDa N-terminal glycoprotein of CD14. Previously, agitation-induced increases in presepsin levels have been reported; however, the mechanism remains poorly understood. In this study, we aimed to reveal the mechanism of presepsin increase. The agitated plasma or serum was separated using gel exclusion chromatography and analyzed by ELISA. The effect of an anti-CD14 antibody (F1024-1-3) was examined. We observed elevated presepsin levels in the agitated plasma and aggregated soluble CD14 (sCD14). However, treatment with F1024-1-3 before agitation prevented the aggregation and the increase in presepsin levels. Depletion of aggregated sCD14 decreased the presepsin levels. Our findings indicate that agitation induces the aggregation of sCD14 and triggers an increase in presepsin. Anti-CD14 antibody prevents an increases in presepsin.

Endotoxin contamination of single-use sterile surgical gloves.

Aim: Strict endotoxin limits are enforced for implants and catheters inserted into the body. However, no standard limit has been set for single-use sterile surgical gloves. Materials & methods: Four types of gloves sold in Japan were dipped in saline and that endotoxin levels were measured. Cytokine producing activity of gloves in blood was also measured. Results: Three of the four types of gloves showed endotoxin contamination. We also confirmed an increase in cytokine production in these gloves except one glove in which anionic surfactants was found. Conclusion: The extent to which detected endotoxins enter the body during surgery is controversial, but strict endotoxin limits need to be established.

Study of usefulness of low-dose IgG for patients with septic disseminated intravascular coagulation.

Aim: Improving prognosis with intravenous IgG (IVIG) has been ruled out in a large, multicenter, randomized controlled trial in patients with sepsis. However, its efficacy in the case of septic disseminated intravascular coagulation (DIC) has not been well studied. Results, materials & methods: We retrospectively evaluated the effects of IVIG on severity scores and 28-day survival in patients with septic DIC. A total of 80 patients with septic DIC were enrolled. Changes in infection-related markers, coagulation-related markers, severity scores and 28-day survival were compared between IVIG-treated and untreated groups. Discussion & conclusion: IVIG treatment significantly reduced the Sequential Organ Failure Assessment scores and DIC scores and increased platelet counts, but the 28-day mortality rate did not decrease significantly.

Course of matrix metalloproteinase-1 and pulmonary oxygenation in acute respiratory distress syndrome caused by oral ingestion of large doses of oxadiazon/butachlor emulsion: a case report.

BACKGROUND: We treated a patient who developed acute respiratory distress syndrome following ingestion of oxadiazon/butachlor emulsion. In this case, we continuously measured matrix metalloproteinase-1 level, an enzyme that reduces the extracellular matrix in the lungs, and tissue inhibitors of metalloproteinase-1. CASE PRESENTATION: A 50-year-old woman attempted suicide by ingesting approximately 300 mL of oxadiazon/butachlor emulsion. Respiratory disorders were observed upon admission, therefore tracheal intubation was performed, followed by artificial respiratory management (ventilator support). After that, her condition became complicated by acute respiratory distress syndrome, but it improved with intensive care management. Matrix metalloproteinase-1 level showed a course opposite to the partial pressure of arterial oxygen/percentage of inspired oxygen ratio, whereas the matrix metalloproteinase-1/tissue inhibitors of metalloproteinase-1 ratio changed in parallel with the partial pressure of arterial oxygen/percentage of inspired oxygen ratio. CONCLUSION: The relationship between matrix metalloproteinase-1 and tissue inhibitors of metalloproteinase-1 was presumed to be important for the development of acute respiratory distress syndrome.