A Dual Alkylated Peptide-ligand Enhances Affinity to Human Serum Albumin.

Therapeutic peptides and diagnostic agents with their molecular size below the renal clearance threshold suffer from short blood circulation time. Here, we report a novel design of peptide-based ligand with a strong binding affinity to human serum albumin (HSA), which can be used as a tag to extend the blood circulation of small-size molecules. We designed ligands with dual alkyl groups connected with a negatively charged spacer. The ligands showed both higher binding affinity to HSA and a higher retention in mice blood than that of a single alkylated peptide.

Electrochemical Control of Bioluminescence by Blocking the Adsorption of the Bacterial Luciferase Using a Mercaptobipyridine Self-assembled Monolayer.

An N-butyl-N'-(4-mercaptobutyl)-4,4'-bipyridinium (4BMBP) was modified on a gold electrode to improve the electrochemical control of the bacterial luciferase (BL) luminescence system. The 4BMBP-modified gold electrode (4BMBP/Au) was able to prevent the adsorption of BL on the electrode surface, and enhanced the electrochemical regeneration rate of the reduced flavin mononucleotide (FMNH2), which is one of the substrates of the BL luminescence reaction. By using the 4BMBP/Au, the luminescence intensity increased by about 27% compared to that of a bare gold electrode (bare Au). Moreover, the modified electrode improved the time required for analysis because the modified layer prevented BL adsorption. Even without a refreshing procedure for each measurement, a constant luminescence intensity could be observed, and the analysis time was reduced to half (about 10 min) for one sample. The 4BMBP/Au is not only useful to control of the BL luminescence system, but also for electrochemical measurements in the presence of proteins.

Voltammetric study of the boric acid-salicylaldehyde-H-acid ternary system and its application to the voltammetric determination of boron.

The ternary system of boric acid, salicylaldehyde (SA) and H-acid (HA) was voltammetrically studied from kinetic and equilibrium points of view. The effect of the SA substituents was also studied by using two analogs, 5-fluorosalicylaldehyde (F-SA) and 5-methylsalicylaldehyde (Me-SA). The three cathodic peaks of Azomethine H (AzH), Azomethine H-boric acid complex (AzB), and free SA were observed in the solution containing boric acid, SA and HA. The peak potentials of AzH and SA were shifted to negative potentials with increasing pH, while the peak potential of AzB was pH-independent. This difference indicates that a proton participates in the charge-transfer steps of the AzH and SA reductions, but not in that of the AzB reduction. The formation constants for the AzB complexation were similar among all the examined analogs. In the kinetic study, the reaction rate was higher in an acidic condition for the AzH formation, but in a neutral condition for the AzB formation. The rate constants for the AzB complexes were in the order of F-SA > SA ≈ Me-SA, indicating that the fluoro group accelerates the F-AzB complexation. The AzB complexation mechanism is considered to consist of more than three steps, i.e., the pre-equilibrium of the salicylaldehyde-boric acid complex (SA-B) formation, the nucleophilic attack of HA on SA-B, and the remaining some steps to form AzB. Based on these results, the voltammetric determination method of boron using F-SA was optimized, which allowed the boron concentration to be determined within only 5 min with a 0.03 mg B dm(-3) detection limit.

Kinetic flow-injection analysis of boron using 5-fluorosalicylaldehyde and H-acid.

Boric acid reacts with 5-fluorosalicylaldehyde (F-SA) and 8-amino-1-naphthol-3,6-disulfonic acid (HA) to form the boric acid-fluoroazomethine H complex (F-AzB) that is now being used for the flow-injection analysis (FIA) of boric acid. At pH 6.5, the F-AzB complexation proceeded fairly fast, whereas the fluoroazomethine H (F-AzH) formation was slow. Thus, highly sensitive measurement of F-AzB was possible if the reaction time was controlled using the FIA method to decrease the background absorbance of F-AzH at the analytical wavelength. The optimum conditions for the color developing reaction were investigated for single and dual channel systems. The former system was simple, applicable to the determination of boron in reversed osmosis (RO) desalination water with a detection limit (LOD) of 4 µg B dm(-3). For the latter system, the calibration range was 0.005 to 10 mg B dm(-3) with an LOD of 1 µg B dm(-3), which can be applicable to natural water analyses of boron. These methods could analyze 15 - 20 samples in one hour. The results of the boron concentration measurement for water samples from an RO desalination plant, industrial wastewater and river water were in fairly good agreement with those obtained by other methods.

Bioluminescence inhibition of bacterial luciferase by aliphatic alcohol, amine and carboxylic acid: inhibition potency and mechanism.

The inhibitory effects of hydrophobic molecules on the bacterial luciferase, BL, luminescence reaction were analyzed using an electrochemically-controlled BL luminescence system. The inhibition potency of alkyl amines, C(n)NH(2), and fatty acids, C(m)COOH (m = n - 1), on the BL reaction increased with an increase in the alkyl chain-length of these aliphatic compounds. C(m)COOH showed lower inhibition potency than C(n)NH(2) and alkyl alcohols, C(n)OH, data for which have been previously reported. To make clear the inhibition mechanisms of the aliphatic compounds on the BL reaction, the initial rate of the BL reaction was measured and analyzed using the Dixon plot and Cornish-Bowden plot. The C(12)OH inhibited the BL reaction in competition with the substrate C(11)CHO, while C(12)NH(2) and C(11)COOH inhibited in an uncompetitive manner with the C(11)CHO. These results suggest that the alkyl chain-length and the terminal unit of the aliphatic compound determine the inhibition potency and the inhibition mechanism, respectively.

Immobilization of bacterial luciferase into poly(N-isopropylacrylamide) film for electrochemical control of a bioluminescence reaction.

A poly(N-isopropylacrylamide) film was modified on an indium-tin oxide electrode in order to immobilize bacterial luciferase (BL) on the electrode surface. By using the modified electrode, flavin mononucleotide (FMN) was electrochemically reduced to FMNH(2), which is one of the substrates of the BL luminescence reaction, to control the bioluminescence reaction by BL. The BL reaction in the modified film could be promoted and controlled by the electrochemical generation of FMNH(2). This BL luminescence system was evaluated as a model system for the inhibitory assay of hydrophobic molecules on protein functions.

Oxidation of chromium(III) by free chlorine in tap water during the chlorination process studied by an improved solid-phase spectrometry.

The oxidation of Cr(III) at naturally-occurring concentration levels, i.e., µg dm(-3) or lower levels, by free chlorine during the chlorination process of tap water was studied using an improved solid-phase spectrophotometric method, which can be directly applicable to the specific determination of Cr(VI) at µg dm(-3) or lower levels. The effect of the pH on the oxidation kinetics was investigated under three different pH conditions. The results showed that free chlorine oxidized the Cr(III) to Cr(VI), following the pseudo-first-order kinetics with half lifetimes of 3.0, 3.3 and 14.4 h at pH 5.0, 7.0 and 8.0, respectively, if the hypochlorite concentration was maintained at 4 mg Cl dm(-3).

Inhibition of electrochemically controlled bioluminescence of bacterial luciferase by n-alkyl alcohols.

An electrochemical system has been developed in order to assay the effect of hydrophobic molecules on the bioluminescence of bacterial luciferase (BL). The inhibition of BL luminescence by the long-chain n-alkyl alcohol has been examined using this system. The 1-heptanol, 1-octanol, 1-nonanol, 1-decanol, 1-undecanol and 1-dodecanol inhibited the BL reaction in a dose-dependent manner. The IC(50) value, that is, the inhibitor concentration required to decrease the luminescence intensity by half, of these alcohols decreased with increasing the alkyl chain-length of the alcohols. In contrast, the shorter chain 1-hexanol did not inhibit the BL luminescence at all in the examined concentration range. These results indicate that the molecular size and hydrophobicity of the n-alkyl alcohol are the key factors to the inhibitory potency of the BL reaction. The IC(50) values are in agreement with values obtained for the bioluminescence of the firefly luciferase system. The proposed electrochemical BL luminescence system will be used for an inhibitory assay of hydrophobic drugs, such as general anesthetics on protein functions.

Improved solid-phase spectrophotometry for the microdetermination of chromium(VI) in natural water.

A simple and sensitive solid-phase spectrophotometry procedure was improved for the microdetermination of Cr(VI). A 0.06 cm3 portion of a cation exchanger, Muromac AG 50W-X2, was used to concentrate the target Cr(VI) in a 20 cm3 water sample, and resin beads were introduced in a flow cell of 1.5 mm diameter and having a 10 mm light path length for measurements using a UV-visible spectrophotometer. Three lenses were used for focusing the incident light beam and for recovering light scattered by the solid phase in the cell. The sensitivity achieved was higher by a factor of 277 compared with that of the solution method, and the detection limit was 0.014 microg dm(-3). The recovery on spiked real water samples by the standard addition method was 96-101%. Favorable working and performance characteristics made it possible to directly determine sub-microg dm(-3) amounts of Cr(VI) in natural water samples.

Steady-state bioluminescence of bacterial luciferase using electrochemical regeneration of flavin substrate and its application to inhibitory analysis.

The model system for the biological reaction using a bacterial luciferase (BL) was developed and applied to the inhibitory analysis of the hydrophobic molecules for enzymatic reactions. The homemade flow electrochemical luminescence cell was embedded in the BL reaction system to regenerate the reduced form of the flavin mononucleotide, which is one of the substrates of the BL luminescence reaction, and to measure the luminescence intensity. The constant intensity of the continuous BL luminescence was observed using the continuous-flow BL reaction system. The proposed system was successfully applied to the inhibitory reaction of dodecaneamide on the BL luminescence reaction.

Binding properties of hydrophobic molecules to human serum albumin studied by fluorescence titration.

Two fluorescence modes were combined to analyze the binding properties of terminally substituted alkanes (C(n)X, X = COOH, OH, CHO, NH(2)) to human serum albumin (HSA). A competitive binding assay using an 8-anilino-1-naphthalenesulfonate (ANS) fluorescence probe provides information on all the hydrophobic binding sites in HSA. A binding assay using the intrinsic fluorescence of the tryptophan residue in HSA (Trp-HSA) provides information on the specific binding site close to the tryptophan residue. There are three fluorescence-active ANS binding sites in HSA, which can be classified into two types by their affinity for ANS. C(n)COOH bound to all three ANS binding sites including the Trp-HSA site, however, it did not quench the fluorescence of Trp-HSA. C(n)CHO bound only to the Trp-HSA site with quenching of the fluorescence of Trp-HSA. By comparing the binding affinities of HSA for C(n)OH and C(n)CHO, it was concluded that the C(n)OH binding site is different from the C(n)CHO binding site. C(n)NH(2) did not bind to any of the three ANS binding sites in HSA.

On-line electrochemical oxidation of Cr(III) for the determination of total Cr by flow injection-solid phase spectrophotometry.

A novel on-line oxidation method of ultra-trace Cr(III) dissolved in natural water has been developed using a flow electrolysis cell. This method was successfully applied to the determination of the total Cr concentration by flow injection-solid phase spectrophotometry using diphenylcarbazide as a coloring agent. With the applied potential of 1.35 V (vs. Ag/AgCl) and the flow rate of 0.80 cm(3) min(-1), Cr(III) was quantitatively oxidized to Cr(VI) at room temperature. The total Cr concentration of sub-microg dm(-3) in 3 - 4 samples could be determined within 1 h using an aqueous sample volume of 7.1 cm(3). The analytical values of the total Cr concentration in natural water were in good agreement with those obtained by ICP-MS. The detection limit of the proposed method was 0.014 microg dm(-3) (3sigma, n = 7). This method could be applied to the specific determination of Cr(III) and Cr(VI) in river water samples.

Classification of the binding modes in bovine serum albumin using terminally substituted alkane analogues.

With the fluorescence probe of 8-anilino-1-naphthalenesulfonate (ANS), the binding modes of terminally substituted alkane analogues (C(n)X; X = COOH, OH, CHO, NH(3), CONH(2)) to bovine serum albumin (BSA) were investigated using a competitive binding technique. The Scatchard plot of the fluorometric titration of BSA with ANS showed that the maximum binding number of ANS, n(max), was 3.81, with the binding constant, K(bnd), of 1.42 x 10(6) mol(-1) dm(3). The binding modes of C(n)X to BSA were analyzed based on the fluorometric titration of the ANS and BSA mixture with C(n)X. C(n)COOH completely displaced the ANS bound to BSA, whereas C(n)OH and C(n)CHO displaced only about 40% of the ANS bound to BSA. In contrast, C(n)NH(2) and C(n)CONH(2) displaced very little bound ANS. By comparing these results, we classified the binding modes of C(n)X to BSA into three types. Two of them are detectable with the ANS fluorescence and the remaining one is not detectable with the fluorescence.

Inhibition of firefly luciferase by alkane analogues.

We reported that anesthetics increased the partial molal volume of firefly luciferase (FFL), while long-chain fatty acids (LCFA) decreased it. The present study measured the actions of dodecanol (neutral), dodecanoic acid (negatively charged), and dodecylamine (positively charged) hydrophobic molecules on FFL. The interaction modes are measured by (1) ATP-induced bioluminescence of FFL and (2) fluorescence of 2-(p-toluidino)naphthalene-6-sulfonate (TNS). TNS fluoresces brightly in hydrophobic media. It competes with the substrate luciferin on the FFL binding. From the Scatchard plot of TNS titration, the maximum binding number of TNS was 0.83, and its binding constant was 8.27 x 10(5) M(-1). Job's plot also showed that the binding number is 0.89. From the TNS titration of FFL, the binding constant was estimated to be 8.8 x 10(5) M(-1). Dodecanoic acid quenched the TNS fluorescence entirely. Dodecanol quenched about 25% of the fluorescence, whereas dodecylamine increased it. By comparing the fluorescence of TNS and bioluminescence of FFL, the binding modes and the inhibition mechanisms of these dodecane analogues are classified in three different modes: competitive (dodecanoic acid), noncompetitive (dodecylamine), and mixed (dodecanol).