RESUMO
The poor electrocatalytic stability and rapid deactivation of metal electrocatalysts are always present in the electrocatalytic conversion of carbon dioxide (CO2) due to the harsh reduction condition. Herein, we demonstrate the controllable dispersion of ultrafine bismuth nanoparticles among the hollow carbon shell (Bi@C-700-4) simply by a thermal-driven diffusion process. The confinement effect of nitrogen-doped carbon matrix is able to low the surface energy of bismuth nanoparticles against the easy aggregation commonly observed for the thermal treatment. On the basis of the synergistic effect and confinement effect between bismuth nanoparticles and carbon matrix, the highly dispersed active sites render the obviously improved electrocatalytic activity and stability for CO2 reduction into formate. The in situ experimental observations on the reduction process and theoretical calculations reveal that the incorporation of bismuth nanoparticles with nitrogen-doped carbon matrix would promote the activation of CO2 and the easy formation of key intermediate (*OCHO), thus leading the enhanced electrocatalytic activity, with a Faradaic Efficiency (FE) of formate about 94.8 % and the long-time stability. Furthermore, the coupling of an anode for 5-hydroxymethylfurfural oxidation reaction (HMFOR) in solar-driven system renders the high 2,5-furandicarboxylic acid (FDCA) yield of 81.2 %, presenting the impressive solar-to-fuel conversion.
RESUMO
The sluggish kinetics of the oxygen evolution reaction (OER) always results in a high overpotential at the anode of water electrolysis and an excessive electric energy consumption, which has been a major obstacle for hydrogen production through water electrolysis. In this study, we present a CoNi-LDH/Fe MOF/NF heterostructure catalyst with nanoneedle array morphology for the OER. In 1.0 M KOH solution, the heterostructure catalyst only required overpotentials of 275 and 305 mV to achieve high current densities of 500 and 1000 mA/cm2 for OER, respectively. The catalytic activities are much higher than those of the reference single-component CoNi-LDH/NF and Fe MOF/NF catalysts. The improved catalytic performance of the heterostructure catalyst can be ascribed to the synergistic effect of CoNi-LDH and Fe MOF. In particular, when the anodic OER is replaced with the urea oxidation reaction (UOR), which has a relatively lower thermodynamic equilibrium potential and is expected to reduce the cell voltage, the overpotentials required to achieve the same current densities can be reduced by 80 and 40 mV, respectively. The cell voltage required to drive overall urea splitting (OUS) is only 1.55 V at 100 mA/cm2 in the Pt/C/NF||CoNi-LDH/Fe MOF/NF two-electrode electrolytic cell. This value is 60 mV lower compared with that required for overall water splitting (OWS). Our results indicate that a reasonable construction of a heterostructure catalyst can significantly give rise to higher electrocatalytic performance, and using UOR to replace the anodic OER of the OWS can greatly reduce the electrolytic energy consumption.
RESUMO
Electrocatalysts with atomically dispersed metal sites (e.g., metal-nitrogen-carbon) have been deemed as promising alternatives for noble-metal catalysts in couples of electrocatalytic reactions. However, the modulation of such atomic sites and the understanding of their interactions are still highly challenging. Herein, we propose a unique supermolecule assembly-profile coating strategy to prepare a series of diatomic electrocatalysts by profile coating of eight Prussian blue analogues (PBAs) on supramolecular supports respectively as bimetallic sources. The detailed microstructure analysis revealed that the metal-nitrogen-carbon sites with four- (Zn-N4 ) and five-coordination (Fe-N5 ) via the nitrogen coordination are similar to the cytochrome c oxidases. For promising electrocatalysis, such unique microstructure is able to activate oxygen molecules due to nitrogen-bonding coordination with bimetal sites, thus leading to efficient four-electron oxygen reduction in alkaline, neutral, and acid electrolytes. Especially, zinc group elements (e.g., Zn and Cd) with d10 electron configuration would significantly boost the nitrogen-bonding coordination with bimetal sites to enhance electrocatalytic activity. The proof-of-concept for the general synthesis of advanced electrocatalysts with controllable bimetal active sites and the mechanistic understanding will promote the promising electrocatalysis by applying the similar principles.
RESUMO
Zinc-iodine batteries are promising energy storage devices with the unique features of aqueous electrolytes and safer zinc. However, their performances are still limited by the polyiodide shuttle and the unclear redox mechanism of iodine species. Herein, a single iron atom was embedded in porous carbon with the atomic bridging structure of metal-nitrogen-carbon to not only enhance the confinement effect but also invoke the electrocatalytic redox conversion of iodine, thereby enabling the large capacity and good cycling stability of the zinc-iodine battery. In addition to the physical trapping effect of porous carbon with good electronic conductivity, the in situ experimental characterization and theoretical calculation reveal that the metal-nitrogen-carbon bridging structure modulates the electronic properties of carbon and adjusts the intrinsic activity for the reversible conversion of iodine via the thermodynamically favorable pathway. This work demonstrates that the physicochemical confinement effect can be invoked by the rational anchoring of a single metal atom with nitrogen in a porous carbon matrix to enhance the electrocatalytic redox conversion of iodine, which is crucial to fabricating high-performing zinc-iodine batteries and beyond by applying the fundamental principles.
RESUMO
The electrocatalytic generation of valuable fuels and chemicals from carbon dioxide (CO2) and others with the assistance of clean solar energy is a highly promising way to realize the carbon-neutral cycle, which invokes the systematic development of advanced electrocatalysts for efficient and selective redox reactions of feedstocks. Herein, we demonstrate the interface modification of cuprous oxide with polyvinylpyrrolidone (PVP) to improve the electrocatalytic efficiency for the synchronous formate generation. Density functional theory calculations reveal that the interfacial properties can be effectively regulated by the PVP functionalization for the favorable formation of intermediates to improve the selectivity of formate generation. Importantly, the advanced electrocatalyts enable an efficient coupling of CO2 reduction with methanol oxidation in an electrochemical cell powered with a solar cell. The work provides a predictive link between the electrocatalytic redox reactions by applying the interfacial regulation strategies of electrocatalysts.
Assuntos
Dióxido de Carbono , Energia Solar , Dióxido de Carbono/química , Formiatos/química , OxirreduçãoRESUMO
To meet strategic applications, electrochemical reduction of CO2 into value-added chemical molecules would be improved by the rational design of advanced electrocatalysts with atomically dispersed active sites. Herein an electrospun-pyrolysis cooperative strategy is presented to not only modulate the porous structure of the carbon support for favorable charge and mass transfer, but also adjust the bridging structure of atomically dispersed metal species. Typically, the experimental results and theoretical calculations revealed that the unique chemical structure of binuclear nickel bridging with nitrogen and carbon atoms (namely Ni2 -N4 -C2 ) tunes the electronic nature of the d-states for the optimal adsorption of carbon dioxide and intermediates, thus inducing the substantial enhancement of CO2 reduction via the thermodynamically more favorable pathway. The identification of such a structure demonstrates the large space to modulate the atomic bridging status for optimizing electrocatalysis.
RESUMO
The electrocatalytic reduction of carbon dioxide into organic fuels and feedstocks is a fascinating method to implement the sustainable carbon cycle. Thus, a rational design of advanced electrocatalysts and a deep understanding of reaction mechanisms are crucial for the complex reactions of carbon dioxide reduction with multiple electron transfer. In situ and operando techniques with real-time monitoring are important to obtain deep insight into the electrocatalytic reaction to reveal the dynamic evolution of electrocatalysts' structure and composition under experimental conditions. In this paper, the reaction pathways for the CO2 reduction reaction (CO2 RR) in the generation of various products (e.g., C1 and C2 ) via the proposed mechanisms are introduced. Moreover, recent advances in the development and applications of in situ and operando characterization techniques, from the basic working principles and in situ cell structure to detailed applications are discussed. Suggestions and future directions of in situ/operando analysis are also addressed.
RESUMO
In the total synthesis of natural products, synthetic efficiency has been an important driver for designing and developing new synthetic strategies and methodologies. To this end, the step, atom, and time economy and the overall yield are major factors to be considered. On the other hand, developing unified routes that can be used for synthesizing multiple molecules, specifically skeletally different classes of molecules, are also important aspects with which to be concerned. In the efforts toward efficient and flexible synthesis of structurally unique terpenoid and indole alkaloid natural products, we have designed and developed several phosphinamide-based new catalysts and reaction methodologies that have been compellingly demonstrated to be widely useful as strategic protocols for the diverse synthesis of various complex terpenoids and indole alkaloids. The important progress of these results will be summarized in this Account.In the first part, we present the stories of successful design and establishment of a novel method for the synthesis of P-stereogenic phosphinamides (P-SPhos) via a Pd-catalyzed C-H desymmetric enantioselective arylation, as well as the flexible derivatization of the P-stereogenic phosphinamides into various types of skeletally unique tricyclic and N,P-bidentate P-stereogenic compounds. Subsequently, the discovery of P-stereogenic phosphinamides as chiral organocatalysts for the desymmetric enantioselective reduction of cyclic 1,3-diketones and of phosphinamide-based cyclopalladium complex (C-Pd) as precatalysts for highly efficient Suzuki-Miyaura cross-coupling reaction of sterically congested nonactivated enolates is introduced. The notable features of the P-stereogenic phosphinamide-catalyzed desymmetric enantioselective reduction are highlighted by the broad substrate compatibility and excellent stereoselectivity, as well as most significantly, the good recoverability and reusability of catalysts. With regard to the sterically congested nonactivated enolates, such substrates are challenging for Suzuki cross-coupling reactions. We demonstrate that the phosphinamide-based cyclopalladium is a type of highly active precatalyst that allows the reaction to proceed under mild conditions and to be easily scaled up. Following the methodology development, the practical applications of these methods serving as strategic transformations are highlighted by the unified synthesis of four cyathane-type and two hamigeran-type terpenoids.In the second part, we describe the development of a robust method for oxidative Heck cross-coupling of indolyl amides by using the phosphinamide-based cyclopalladium as catalyst or phosphinamide as coligand. The method provides a general and straightforward method for diverse synthesis of indolyl δ-lactam derivatives, which present as a common core in a variety of Aspidosperma-derived indole alkaloids. The successful demonstration of this protocol for a concise and divergent synthesis of leuconodine-type indole alkaloids is also presented. We believe the results presented in this Account would have significant implications beyond our results and would find further applications in the field of synthetic methodology and natural product synthesis.
Assuntos
Produtos Biológicos , Amidas , Catálise , Alcaloides Indólicos , EstereoisomerismoRESUMO
The macro-meso-microporous and defective metal-organic framework constructed by transition metal Zn and 2,2'-bipyridine-5,5'-carboxylate was synthesized in CO2-expanded solvent. It shows high photocatalytic activity and selectivity for the oxidation of amines to imines under mild conditions, i.e., air as an oxidant, room temperature, and involving no photosensitizer or cocatalyst.
RESUMO
Divergent enantioselective total syntheses of five naturally occurring post-iboga indole alkaloids, dippinineâ B and C, 10,11-demethoxychippiine, 3-O-methyl-10,11-demethoxychippiine, and 3-hydroxy-3,4-secocoronaridine, as well as the two analogues 11-demethoxydippinineâ A and D, are presented for the first time. The enantioenriched aza[3.3.1]-bridged cycle, a common core intermediate to the target molecules, was constructed through an asymmetric phase-transfer-catalyzed Michael/aldol cascade reaction. The challenging azepane ring fused around the indole ring and the [3.3.1]-bridged cycle were installed through an intramolecular SN 2'-type reaction. These cyclization strategies enabled rapid construction of the [6.5.6.6.7]-pentacyclic core at an early stage. Highlights of the late-stage synthetic steps include a Pd-catalyzed Stille coupling and a highly stereoselective catalyst-controlled hydrogenation to incorporate the side chain at C20 with both R and S configurations in the natural products.
RESUMO
The electrochemical synthesis of chemicals from carbon dioxide, which is an easily available and renewable carbon resource, is of great importance. However, to achieve high product selectivity for desirable C2 products like ethylene is a big challenge. Here we design Cu nanosheets with nanoscaled defects (2-14 nm) for the electrochemical production of ethylene from carbon dioxide. A high ethylene Faradaic efficiency of 83.2% is achieved. It is proved that the nanoscaled defects can enrich the reaction intermediates and hydroxyl ions on the electrocatalyst, thus promoting C-C coupling for ethylene formation.
RESUMO
Here we demonstrate that the utilization of 2,4,6-tris(4-pyridyl)pyridine (tpy) for metal-organic framework modification can greatly improve the photocatalytic performance for CO2 reduction. The electron-donating nature of tpy enables the charge transfer effect, which induces strong CO2 binding affinity, facilitates *COOH formation and promotes CO2-to-CO conversion.
RESUMO
Here, we demonstrate for the first time the construction of covalent organic framework (COF) capsules with nanostructured surfaces, which combine advantages of highly accessible surface area, excellent light absorbance, and efficient separation of photogenerated electron-hole pairs. The COF capsules exhibit high activity and selectivity for photocatalytic oxidation under mild conditions.
RESUMO
We present the first asymmetric total synthesis and absolute configuration determination of (+)-tronocarpine. The [6.5.7.6.6] pentacyclic core was constructed at an early stage by using a sequential cyclization strategy through a newly developed catalytic asymmetric Michael/aldol cascade to build the aza[3.3.1]-bridged cycle and a tandem reduction/hemiamidation procedure to assemble the seven-membered lactam. The side-chain functionalities were incorporated at a late stage by several appropriately orchestrated manipulations under mild conditions. The synthesis of enantiomerically pure (+)-tronocarpine was achieved through a 20-step longest linear sequence from tryptamine.
RESUMO
Metal-organic frameworks (MOFs) have attracted increased research attention in photocatalysis due to their great potential in light harvest and conversion. However, the organic transformations as photocatalyzed by MOFs under mild conditions yet remain a challenge. Herein, three bipyridyl-containing cadmium-organic frameworks Cd(dcbpy) (dcbpy = 2,2'-bipyridine-5,5'-dicarboxylate), Cd(bdc)(bpy) (bdc = 1,4-benzenedicarboxylate; bpy = 2,2'-bipyridyl), and Cd(bdc)(2Me-bpy) (2Me-bpy = 4,4'-dimethyl-2,2'-bipyridyl) were synthesized for the first time. The bpy-containing Cd-MOFs have strong light harvest abilities and suitable photocatalysis energy potentials, making them highly active and selective for the photo-oxidation of benzylamine to N-benzylbenzaldimine under mild conditions, i.e., using atmospheric air as oxidant, at room temperature, and in the absence of any photosensitizer or cocatalyst. It provides an efficient, economical, and green way for the direct oxidation of amines to produce imines.
RESUMO
Developing highly efficient electrocatalysts based on cheap and earth-abundant metals for CO2 reduction is of great importance. Here we demonstrate that the electrocatalytic activity of manganese-based heterogeneous catalyst can be significantly improved through halogen and nitrogen dual-coordination to modulate the electronic structure of manganese atom. Such an electrocatalyst for CO2 reduction exhibits a maximum CO faradaic efficiency of 97% and high current density of ~10 mA cm-2 at a low overpotential of 0.49 V. Moreover, the turnover frequency can reach 38347 h-1 at overpotential of 0.49 V, which is the highest among the reported heterogeneous electrocatalysts for CO2 reduction. In situ X-ray absorption experiment and density-functional theory calculation reveal the modified electronic structure of the active manganese site, on which the free energy barrier for intermediate formation is greatly reduced, thus resulting in a great improvement of CO2 reduction performance.
RESUMO
The electrocatalytic conversion of CO2 to CO using non-noble metal catalysts under mild conditions is of great importance. Achieving the combination of high activity, selectivity and current density by developing electrocatalysts with desirable compositions and structures is challenging. Here we prepared for the first time Cu x Ni y alloy nanoparticles embedded in a nitrogen-carbon network. Such an electrocatalyst not only well overcomes the disadvantages of single Cu and Ni catalysts but has a high CO2 adsorption capacity. Outstandingly, the catalyst can effectively convert CO2 into CO with a maximum faradaic efficiency of 94.5% and current density of 18.8 mA cm-2 at a low applied potential of -0.60 V (versus reversible hydrogen electrode, RHE). Moreover, the catalyst is very stable during long-term electrolysis owing to the stabilization of the nitrogen-carbon network.
RESUMO
The details for the synthetic studies on enantioselective total synthesis of cyathane diterpenoids cyrneine A (1) and B (2), glaucopine C (3), and (+)-allocyathin B2 are presented. We established a mild Suzuki coupling for heavily substituted nonactivated cyclopentenyl triflates using a phosphinamide-derived palladacycle as precatalyst and a chelation-controlled highly regioselective Friedel-Crafts cyclization. The utilization of these two key reactions enabled a rapid construction of the 5-6-6 tricyclic skeleton. In the middle stage of the synthesis, a Birch reductive methylation, a modified Wolff-Kishner-Huang reduction, and a carbenoid-mediated ring expansion were employed as the key reactions to furnish the 5-6-7 tricyclic core bearing two antiorientated all-carbon quaternary stereocenters at the C6 and C9 ring junctions. By applying these key transformations, a more efficient total synthesis of cyrneine A and allocyathin B2, and the first total synthesis of cyrneine B and glaucopine C, were accomplished through a collective manner. The late-stage conversions involving a base-mediated double bond migration and a double bond migration/aerobic γ-CH oxidation cascade for the stereoselective synthesis of cyrneine B and glaucopine C were interesting.
Assuntos
Diterpenos/síntese química , Diterpenos/química , Estrutura Molecular , EstereoisomerismoRESUMO
Guaiacol is an important feedstock for producing various high-value chemicals. However, the current production route of guaiacol relies heavily on fossil resources. Using lignin as a cheap and renewable feedstock to selectively produce guaiacol has great potential, but it is a challenge because of its heterogeneity and inert reactivity. Herein, we discovered that La(OTf)3 could catalyze the transformation of lignin with guaiacol as the only liquid product. In the reaction, La(OTf)3 catalyzed the hydrolysis of lignin ether linkages to form alkyl-syringol and alkyl-guaiacol, which further underwent decarbonization and demethoxylation to produce guaiacol with a yield of up to 25.5 wt%, and the remaining residue was solid. In the scale-up experiment, the isolated yield of guaiacol reached up to 21.2 wt%. To our knowledge, this is the first work to produce pure guaiacol selectively from lignin. The bio-guaiacol may be considered as a platform to promote lignin utilization.
RESUMO
The development of facile, rapid, low-energy, environmentally benign routes for the synthesis of covalent organic frameworks (COFs) is of great interest. This study concerns the utilization of water containing dissolved CO2 as a solvent for the room-temperature synthesis of COF. The as-synthesized particles, denoted COF-LZU1, combine advantages of good crystallinity, nanoscale size, and high surface area, which suggests promising application as a support for heterogeneous catalysts. Moreover, this versatile CO2 -assisted method is also applicable for the room-temperature synthesis of Cu-COF-LZU1. This method gives rise to new opportunities for fabricating COFs and COF-based materials with different compositions and structures.