Hemiarthroplasty vs. internal fixation for nondisplaced femoral neck fracture in mainland China: a cost-effectiveness analysis.

Objective: Nondisplaced femoral neck fractures constitute a substantial portion of these injuries. The optimal treatment strategy between internal fixation (IF) and hemiarthroplasty (HA) remains debated, particularly concerning cost-effectiveness. Methods: We conducted a cost-effectiveness analysis using a Markov decision model to compare HA and IF in treating nondisplaced femoral neck fractures in elderly patients in China. The analysis was performed from a payer perspective with a 5-year time horizon. Costs were measured in 2020 USD, and effectiveness was measured in quality-adjusted life-years (QALYs). Sensitivity analyses, including one-way and probabilistic analyses, were conducted to assess the robustness of the results. The willingness-to-pay threshold for incremental cost-effectiveness ratio (ICER) was set at $11,083/QALY following the Chinese gross domestic product in 2020. Results: HA demonstrated higher cumulative QALYs (2.94) compared to IF (2.75) but at a higher total cost ($13,324 vs. $12,167), resulting in an ICER of $6,128.52/QALY. The one-way sensitivity analysis identified the costs of HA and IF as the most influential factors. Probabilistic sensitivity analysis indicated that HA was more effective in 69.3% of simulations, with an ICER below the willingness-to-pay threshold of $11,083 in 58.8% of simulations. Conclusions: HA is a cost-effective alternative to IF for treating nondisplaced femoral neck fractures in elderly patients in mainland China.

Application of multiplanar reconstruction and 3D printing in anterior cruciate ligament revision. / 多平面重建及3D打印在前交叉韧带翻修术中的应用.

OBJECTIVES: Anterior cruciate ligament injury is the most common type of knee joint ligament injury. Anterior cruciate ligament reconstruction has a high failure rate, with bone tunnel abnormalities as the most significant factor in these failures. Digital orthopedic technology can effectively develop implementation plans for the revision, thus increasing the success rate. This study aims to develop a surgical plan for anterior cruciate ligament revision by employing multiplanar reconstruction (MPR) for measuring bone tunnel position and diameter, and simulating bone tunnel creation via 3D printing preoperatively. METHODS: A total of 12 patients who underwent anterior cruciate ligament revision at the Third Xiangya Hospital of Central South University between 2014 and 2021 were retrospectively studied. The data included patient demographics, preoperative formulated knee joint 3D printing models, and preoperative knee CT scans. The study measured the bone tunnel's diameter and position to guide the establishment of revision bone tunnels during surgery, reassessed the postoperative bone tunnels, and evaluated knee joint functional scores [including International Knee Documentation Committee Knee Evaluation Form (IKDC) score, Lysholm score, and Tegner exercise level score]. RESULTS: Preoperative measurements revealed suboptimal femoral tunnels positions in 4 patients and tibial tunnels positions in 2 patients. MPR and 3D printing technology were used to guide the establishment of a new bone canal during surgery, and postoperative measurements were satisfactory for all patients. Preoperative measurements demonstrated the interclass correlation coefficient for femoral tunnels and tibial tunnels diameters were 0.843 (P<0.05) and 0.889 (P<0.001), respectively. Meanwhile, the intraclass correlation coefficient were 0.811 (P<0.05) and 0.784 (P<0.05), respectively. The intraoperative diameter of femoral and tibial tunnels showed excellent correlation with postoperative CT measurements, with intraclass correlation coefficient values of 0.995 (P<0.001) and 0.987 (P<0.001), respectively. All bone tunnel positions were within the normal range. At the final follow-up, knee joint function scores in all 12 patients improved significantly compared to pre-surgery (P<0.001), and the reoperation rate was zero. CONCLUSIONS: MPR and 3D printing technology can accurately measure the parameters of reconstructed anterior cruciate ligament bone tunnels. Personalized revision plans for patients with reconstruction failure enhances the success rate of revision surgery and improves patient prognosis.

Lightweight Attentive Graph Neural Network with Conditional Random Field for Diagnosis of Anterior Cruciate Ligament Tear.

Anterior cruciate ligament (ACL) tears are prevalent orthopedic sports injuries and are difficult to precisely classify. Previous works have demonstrated the ability of deep learning (DL) to provide support for clinicians in ACL tear classification scenarios, but it requires a large quantity of labeled samples and incurs a high computational expense. This study aims to overcome the challenges brought by small and imbalanced data and achieve fast and accurate ACL tear classification based on magnetic resonance imaging (MRI) of the knee. We propose a lightweight attentive graph neural network (GNN) with a conditional random field (CRF), named the ACGNN, to classify ACL ruptures in knee MR images. A metric-based meta-learning strategy is introduced to conduct independent testing through multiple node classification tasks. We design a lightweight feature embedding network using a feature-based knowledge distillation method to extract features from the given images. Then, GNN layers are used to find the dependencies between samples and complete the classification process. The CRF is incorporated into each GNN layer to refine the affinities. To mitigate oversmoothing and overfitting issues, we apply self-boosting attention, node attention, and memory attention for graph initialization, node updating, and correlation across graph layers, respectively. Experiments demonstrated that our model provided excellent performance on both oblique coronal data and sagittal data with accuracies of 92.94% and 91.92%, respectively. Notably, our proposed method exhibited comparable performance to that of orthopedic surgeons during an internal clinical validation. This work shows the potential of our method to advance ACL diagnosis and facilitates the development of computer-aided diagnosis methods for use in clinical practice.

Preoperative ultrasound can accurately predict the diameter of double-stranded peroneus longus tendon autografts.

PURPOSE: This study aimed to determine the correlation between the intraoperative diameter of double-stranded peroneus longus tendon (2PLT) and length of the PLT autograft and preoperative ultrasound (US) measurements, as well as radiographic and anthropometric measurements. The hypothesis was that US can accurately predict the diameter of 2PLT autografts during operation. METHODS: Twenty-six patients underwent ligament reconstruction with 2PLT autografts were included. Preoperative US was used to calculate the in situ PLT cross-sectional area (CSA) at seven levels (0, 1, 2, 3, 4, 5, 10 cm proximal to the harvest start point). Femoral width, notch width, notch height, maximum patellar length, and patellar tendon length were determined on preoperative radiographs. Intraoperative measurements of PLT were made, including all fiber lengths of PLT and diameters of 2PLT using sizing tubes calibrated to 0.5 mm. RESULTS: CSA at 1 cm proximal to the harvest site had the highest correlation with the diameter of 2PLT (r = 0.84, P < 0.001). Calf length had the highest correlation with PLT length (r = 0.65, P < 0.001). The diameter of the 2PLT autografts could be predicted by the following formula: 4.6 + 0.2 × [sonographic CSA of PLT at 1 cm level]; the length of PLT could be predicted by the following formula: 5.6 + 0.5 × Calf length. CONCLUSION: The diameter of 2PLT and length of PLT autografts can be accurately predicted by preoperative US and calf length measurements, respectively. Accurate preoperative prediction of the diameter and length of autologous grafts can provide the most suitable and individualized graft for patients. LEVEL OF EVIDENCE: IV.

Medial meniscus tears are most prevalent in type I ACL tears, while type I ACL tears only account for 8% of all ACL tears.

PURPOSE: This study aimed to assess the distribution of different anterior cruciate ligament (ACL) tear locations in different magnetic resonance imaging (MRI) planes, and to explore the relationships of ACL tear types with both meniscus injuries and bone bruising. METHODS: A retrospective study was performed in patients under 60 years old who underwent MRI scans in the sagittal and coronal oblique planes of the knee for ACL tears between 2014 and 2020. Patients with reports of chronic tears, partial tears, or prior surgeries were excluded. Tear locations were classified into five types, and the meniscus tear measurement variables included the presence of ramp, root, bucket-handle, and other types of tears. All injuries were confirmed by arthroscopy. Meanwhile, the presence and location of bone bruising were analysed and scored with the Whole-Organ Magnetic Resonance Imaging Score (WORMS) bone bruising subscale. RESULTS: A total of 291 patients were included. The prevalence rates of type I and type III injuries were 23/291 (7.9%) and 145/291 (49.8%) in the sagittal plane and 22/291 (7.6%) and 179/291 (61.5%) in the oblique coronal plane, respectively. The prevalence of medial meniscus tears with ACL tears was 126/291 (43.3%), while that of lateral meniscus tears with ACL tears was 77/291 (26.5%). The highest prevalence of medial meniscus injury with ACL tears was 15/22 (68.2%) for type I injuries. Bone bruises were located on the lateral femoral center in 125 patients (46%) and on the lateral tibia posterior in 132 patients (48%); the common areas of bone bruising were slightly correlated with type III ACL tears but not correlated with type I ACL tears. CONCLUSION: The plane in which an MRI scan is performed affects the classification of ACL tears. The tear type is associated with the prevalence of medial meniscus injuries, and medial meniscus tears are most prevalent in type I ACL tears. LEVEL OF EVIDENCE: IV.

Anterior cruciate ligament reconstruction with lateral extra-articular tenodesis reduces knee rotation laxity and graft failure rate: A systematic review and meta-analysis.

PURPOSE: To determine whether the addition of lateral extra-articular tenodesis (LET) to anterior cruciate ligament reconstruction (ACLR) reduces rotational laxity of the knee, and to compare the clinical results of this treatment with those of ACLR alone. METHODS: PubMed, Embase, and Cochrane Library were searched by two researchers for clinical studies comparing ACLR with and without LET. Studies with only evidence levels I and II and studies in which anterior lateral ligament reconstruction was performed with grafts were excluded. The risk of bias of the studies was assessed using the Cochrane risk-of-bias and modified Downs & Black tools. The outcomes included (1) functional outcomes; (2) knee laxity measures; (3) knee injury osteoarthritis and outcome score; and (4) complications. The outcomes of the two groups were extracted, summarized and compared. RESULTS: A total of 234 studies were retrieved and 223 were excluded. Eleven clinical studies with 1745 patients were included in our meta-analysis. Compared to the patients who underwent ACLR alone, the patients who underwent ACLR with LET had reduced pivot-shift (odds ratio [OR] 0.48, 95% confidence interval [CI] 0.31 to 0.74, p = 0.0009), and lower graft failure rate (OR 0.34, 95% CI 0.20 to 0.55, p < 0.0001). CONCLUSION: Compared with ACLR only, ACLR combined with LET can effectively reduce rotation laxity of the knee joint, and reduce the graft failure rate in high-risk patients. However, the effects on the function and activity level of patients cannot be confirmed.

Correlation between lung infection severity and clinical laboratory indicators in patients with COVID-19: a cross-sectional study based on machine learning.

BACKGROUND: Coronavirus disease 2019 (COVID-19) has caused a global pandemic that has raised worldwide concern. This study aims to investigate the correlation between the extent of lung infection and relevant clinical laboratory testing indicators in COVID-19 and to analyse its underlying mechanism. METHODS: Chest high-resolution computer tomography (CT) images and laboratory examination data of 31 patients with COVID-19 were extracted, and the lesion areas in CT images were quantitatively segmented and calculated using a deep learning (DL) system. A cross-sectional study method was carried out to explore the differences among the proportions of lung lobe infection and to correlate the percentage of infection (POI) of the whole lung in all patients with clinical laboratory examination values. RESULTS: No significant difference in the proportion of infection was noted among various lung lobes (P > 0.05). The POI of total lung was negatively correlated with the peripheral blood lymphocyte percentage (L%) (r = - 0.633, P < 0.001) and lymphocyte (LY) count (r = - 0.555, P = 0.001) but positively correlated with the neutrophil percentage (N%) (r = 0.565, P = 0.001). Otherwise, the POI was not significantly correlated with the peripheral blood white blood cell (WBC) count, monocyte percentage (M%) or haemoglobin (HGB) content. In some patients, as the infection progressed, the L% and LY count decreased progressively accompanied by a continuous increase in the N%. CONCLUSIONS: Lung lesions in COVID-19 patients are significantly correlated with the peripheral blood lymphocyte and neutrophil levels, both of which could serve as prognostic indicators that provide warning implications, and contribute to clinical interventions in patients.

Using the hyperinsulinemic euglycemic clamp to assess insulin sensitivity at 3 months following Roux-en-Y gastric bypass surgery in type 2 diabetes patients with BMI <35 kg/m2 in China.

BACKGROUND: The aim of this study was to describe short-time effect of Roux-en-Y gastric bypass (RYGB) on insulin sensitivity (IS) of Chinese diabetes patients with body mass index (BMI) <35 kg/m2 by hyperinsulinemic euglycemic clamp. MATERIALS AND METHODS: We studied 15 type 2 diabete mellitus (T2DM) patients with BMI <35 kg/m2, who underwent laparoscopical Roux-en-Y gastric bypass (LRYGB). Hyperinsulinemic-euglycemic clamp were performed at baseline and at 3 months after LRYGB. RESULTS: The glucose disposal rate (M value) increased significantly at 3 months after RYGB (from 3.36 ± 1.26 mg kg-1 min-1 to 6.30 ± 1.3 mg kg-1 min-1, p < 0.001). The time to reach euglycemia at the hyperinsulinemic euglycemic clamp reduced remarkably from baseline to 3 months after RYGB (from 114.40 ± 6.11 min to 97.93 ± 8.57 min, p < 0.001). There was a marked reduction in value of HOMA-IR (from 4.47 ± 2.20 mg kg-1 min-1 to 2.10 ± 0.75 mg kg-1 min-1, p < 0.001). The parameters of body fat distribution (body weight, BMI, waist circumference, waist to hip radio) changed obviously after surgery. RYGB caused a significant improvement in fasting and postprandial plasma glucose and insulin, HbAc1. Preoperative M value and the time to reach steady-state correlated with changes of M and the time to reach steady-state at 3 months after RYGB. CONCLUSION: Peripheral and hepatic IS improved remarkably at 3 months following RYGB, as an important mechanism for early improvement in T2DM patients with low BMI. And the time to reach euglycemia at the hyperinsulinemic euglycemic clamp may be an useful index of assessing insulin sensitivity. It is more reasonal to combine the time to reach euglycemia with M value for assessing IS.