Two-dimensional direct Z-scheme AlN/GaS-SiP heterojunctions enhance photocatalytic hydrogen production from water: a DFT study.

Photocatalytic water splitting for hydrogen production offers a feasible solution to the problems of energy shortages and environmental pollution. However, its low photocatalytic efficiency limits the application of this technology in real world scenarios. In this study, a two-dimensional AlN/PSi-GaS-I van der Waals heterojunction is constructed and the properties of water photolysis are studied based on first-principles calculations. The results demonstrate that AlN/PSi-GaS-I exhibits exceptional photocatalytic performance with good stability, a narrow bandgap, appropriate band-edge position, a broader light absorption range and efficient separation of photogenerated electron-hole pairs. Moreover, the Gibbs free energies of different intermediates throughout the entire reaction process are calculated based on type-II and Z-scheme reaction mechanisms. By comparing the free energy barriers of the two pathways, it is observed that the Z-scheme reaction pathway has a lower energy barrier. Consequently, it can be concluded that AlN/PSi-GaS-I belongs to the direct Z-scheme heterojunction. These findings suggest that AlN/PSi-GaS-I exhibits an enhanced redox capacity, efficiently driving the water splitting reaction. More excitingly, the AlN/PSi-GaS-I can undergo spontaneous photocatalytic reactions under acidic conditions when provided with adequate optical driving force. This study not only proves that AlN/PSi-GaS-I is a promising high-efficiency photocatalyst for water splitting, but also describes a method for determining direct Z-scheme heterojunctions, which offers theoretical guidance for the design of efficient and stable photocatalysts.

Prediction of two-dimensional C3N2 semiconductors with outstanding stability, moderate band gaps, and high carrier mobility.

Two-dimensional (2D) semiconductors with suitable band gaps, high carrier mobility, and environmental stability are crucial for applications in the next generation of electronics and optoelectronics. However, current candidate materials each have one or more issues. In this work, two novel C3N2 monolayers, P-C3N2 and I-C3N2 are proposed by first-principles calculations. Both structures have demonstrated excellent dynamical and mechanical stability, with thermal stability approaching 3000 K. Importantly, P-C3N2 shows a distinct advantage in formation energy compared to currently synthesized 2D carbon nitride materials, indicating its potential for experimental synthesis. Electronic structure calculations reveal that both P-C3N2 and I-C3N2 are intrinsic semiconductors with moderate band gaps of 2.19 and 1.81 eV, respectively. Additionally, both C3N2 monolayers display high absorption coefficients up to 105 cm-1, with P-C3N2 showing significant absorption capabilities in the visible light region. Remarkably, P-C3N2 possesses an ultra-high carrier mobility of up to 104 cm2 V-1 s-1. These findings provide theoretical insights and candidates for future applications in the electronics and optoelectronics fields.

Circulating white blood cell traits and prolonged night shifts: a cross-sectional study based on nurses in Guangxi.

This study aimed to elucidate the effects of long day and night shifts on immune cells in a population of nurses. This cross-sectional study in December 2019 was based on a group of nurses. 1568 physically healthy caregivers were included, including 1540 women and 28 men. 1093 nurses had long-term shift work (working in a rotating system for > 1 year). The receiver operating characteristic curve, Ensemble Learning, and Logistic regression analyses were used to evaluate factors related to long-term shift work. The night shift group nurses had significantly higher MPV, PLCR, and WBC and significantly lower BASO%, ELR, MCHC, PLR, RDW-CV, and RDW-SD (P < 0.01). ROC curves showed that WBC, PLR, ELR, RDW_CV, and BASO% were more related to the night shift. Ensemble Learning, combined with the LASSO model, finally filtered out three indicators of night shifts related to ELR, WBC, and RDW_SD. Finally, logistic regression analysis showed that the nurses' night shift situation greatly influenced two peripheral blood ELR and WBC indicators (ELR: log (OR) = - 3.9, 95% CI: - 5.8- - 2.0; WBC: log (OR) = 0.25, 95% CI: 0.18-0.32). Finally, we showed that, unlike WBC, the relative riskiness of ELR showed opposite results among junior nurses and middle-senior nurses (log (OR) 6.5 (95% CI: 1.2, 13) and - 7.1 (95% CI: - 10, - 3.8), respectively). Our study found that prolonged night shifts were associated with abnormal WBC and ELR, but after strict age matching, WBC remained significantly different. These findings help to confirm that COVID-19 and tumorigenesis (e.g., breast cancer) are significantly associated with circadian rhythm disruption. However, more detailed studies are needed to confirm this.

Semimetallic state transition in Two-Dimensional carbon nitride covalent networks and enhanced electrocatalytic activity for nitrate to ammonia conversion.

Single-atom catalysts (SACs), due to their maximum atomic utilization rate, show tremendous potential for application in the electrocatalytic synthesis of ammonia from nitrate. Yet, the development of superior supports that preserve the high selectivity, activity, and stability of SACs remains an imperative challenge. In this work, based on first-principles calculations and tight-binding (TB) model analysis, a new two-dimensional (2D) carbon nitride monolayer, C7N6, is proposed. The C7N6 structure exhibits a strong covalent network, with dynamical, thermal, and mechanical stability. Surprisingly, the structural transition from C9N4 to C7N6 corresponds to a semimetallic state transition. Further symmetry analysis unveils that the Dirac states in C7N6 are protected by space-time inversion symmetry, and the physical origin of the Dirac cone was confirmed using the TB model. Additionally, a non-zero Z2 invariant and significant topological edge states demonstrate its topologically nontrivial nature. Considering the excellent structural and topological properties of C7N6, a three-step screening strategy is designed to identify eligible SACs for electrochemical nitrate reduction reaction (NO3RR), and Ti@C7N6 is identified as possessing the best activity, with the last proton-electron coupling step *NH2→*NH3 being the potential-determining step (PDS), for which the limiting potential is 0.48 V. Moreover, a free energy diagram shows that the *NOH reaction pathway is energetically preferred on Ti@C7N6, and ab initio molecular dynamics (AIMD) calculations at 500 K confirm its good thermal stability. Our study not only provides excellent CN-based support material but also offers theoretical guidance for constructing highly active and selective SACs for nitrate reduction.

Surface-engineered Mo2B: a promising electrode material for constructing Ohmic contacts with blue phosphorene for electronic device applications.

The Schottky barrier between a metal and a semiconductor plays an important role in determining the transport efficiency of carriers and improving the performance of devices. In this work, we systematically studied the structure and electronic properties of heterostructures of blue phosphorene (BP) in contact with Mo2B based on density functional theory. The semiconductor properties of BP are destroyed owing to strong interaction with bare Mo2B. The effect of modifying Mo2B with O and OH on the contact properties was investigated. A p-type Schottky contact can be obtained in BP/Mo2BO2. The height of the Schottky barrier can be modulated by interlayer distance to realize a transition from a p-type Schottky contact to a p-type Ohmic contact in BP/Mo2BO2. The BP/Mo2B(OH)2 forms robust Ohmic contacts, which are insensitive to interlayer distance and external electric fields due to the Fermi level pinning effect. Our work provides important clues for contact engineering and improvement of device performance based on BP.

Strong mechanical anisotropy and an anisotropic Dirac state in 2D C5N3.

Two-dimensional (2D) carbon nitride materials have emerged as a versatile platform for the design of high-performance nanoelectronics, but strong anisotropy in 2D carbon nitrides has rarely been reported. In this work, a 2D carbon nitride with strong anisotropy composed of tetra-, penta-, and hexa-rings (named as TPH-C5N3) is proposed. This TPH-C5N3 exhibits both dynamical and mechanical stability. Furthermore, it also showcases remarkable thermal stability, reaching up to 2300 K, as evidenced by AIMD simulations conducted in an NVT environment utilizing the Nosé-Hoover thermostat. Significantly, TPH-C5N3 demonstrates high anisotropic ratios in its mechanical properties, positioning it as the frontrunner in the current carbon nitride systems. In addition, a Dirac cone with an anisotropic ratio of 55.8% and Fermi velocity of 7.26 × 105 m s-1 is revealed in TPH-C5N3. The nontrivial topological properties of TPH-C5N3 are demonstrated by a non-zero Z2 invariant and topologically protected edge states. Our study offers theoretical insights into an anisotropic 2D carbon nitride material, laying the groundwork for its design and synthesis.

Ultra-high photoelectric conversion efficiency and obvious carrier separation in photovoltaic ZnIn2X4 (X = S, Se, and Te) van der Waals heterostructures.

The need for low-carbon solar electricity production has become increasingly urgent for energy security and climate change mitigation. However, the bandgap and carrier separation critical requirements of high-efficiency solar cells are difficult to satisfy simultaneously in a single material. In this work, several van der Waals ZnIn2X4 (X = S, Se, and Te) heterostructures were designed based on density functional theory. Our results suggest that both ZnIn2S4/ZnIn2Se4 and ZnIn2Se4/ZnIn2Te4 heterostructures are direct bandgap semiconductors at the Γ point. Besides, obvious carrier spatial separations were observed in the ZnIn2S4/ZnIn2Se4 and ZnIn2Se4/ZnIn2Te4 heterostructures. Interestingly, the ZnIn2S4/ZnIn2Se4 heterostructure has a suitable bandgap of 1.43 eV with good optical absorption in the visible light range. The calculated maximum theoretical photoelectric conversion efficiency of ZnIn2S4/ZnIn2Se4 heterostructure was 32.1%, and it can be further enhanced to 32.9% under 2% tensile strain. Compared to single-layer ZnIn2X4 materials, the electron effective mass of the ZnIn2S4/ZnIn2Se4 heterostructure is relatively low, which results in high electron mobility in the heterostructure. The suitable bandgap, obvious carrier separation, high electron mobility, and excellent theoretical photoelectric conversion efficiency of the ZnIn2S4/ZnIn2Se4 heterostructure make it a promising candidate for novel 2D-based photoelectronic devices and solar cells.

How spin state and oxidation number of transition metal atoms determine molecular adsorption: a first-principles case study for NH3.

Understanding how the electronic state of transition metal atoms can influence molecular adsorption on a substrate is of great importance for many applications. Choosing NH3 as a model molecule, its adsorption behavior on defected SnS2 monolayers is investigated. The number of valence electrons n is controlled by decorating the monolayer with different transition metal atoms, ranging from Sc to Zn. Density-Functional Theory based calculations show that the adsorption energy of NH3 molecules oscillates with n and shows a clear odd-even pattern. There is also a mirror symmetry of the adsorption energies for large and low electron numbers. This unique behavior is mainly governed by the oxidation state of the TM ions. We trace back the observed trends of the adsorption energy to the orbital symmetries and ligand effects which affect the interaction between the 3σ orbitals (NH3) and the 3d orbitals of the transition metals. This result unravels the role which the spin state of TM ions plays in different crystal fields for the adsorption behavior of molecules. This new understanding of the role of the electronic structure on molecular adsorption can be useful for the design of high efficiency nanodevices in areas such as sensing and photocatalysis.

Enhanced OER catalytic activity of single metal atoms supported by the pentagonal NiN2 monolayer: insight from density functional theory calculations.

Two-dimensional material-supported single metal atom catalysts have been extensively studied and proved effective in electrocatalytic reactions in recent years. In this work, we systematically investigate the OER catalytic properties of single metal atoms supported by the NiN2 monolayer. Several typical transition metals with high single atom catalytic activity, such as Fe, Co, Ru, Rh, Pd, Ir, and Pt, were selected as catalytic active sites. The energy calculations show that transition metal atoms (Fe, Co, Ru, Rh, Pd, Ir, and Pt) are easily embedded in the NiN2 monolayer with Ni vacancies due to the negative binding energy. The calculated OER overpotentials of Fe, Co, Ru, Rh, Pd, Ir and Pt embedded NiN2 monolayers are 0.92 V, 0.47 V, 1.13 V, 0.66 V, 1.25 V, 0.28 V, and 0.94 V, respectively. Compared to the 0.57 V OER overpotential of typical OER noble metal catalysts IrO2, Co@NiN2 and Ir@NiN2 exhibit high OER catalytic activity due to lower overpotential, especially for Ir@NiN2. The high catalytic activity of the Ir embedded NiN2 monolayer can be explained well by the d-band center model. It is found that the adsorption strength of the embedded TM atoms with intermediates follows a linear relationship with their d-band centers. Besides, the overpotential of the Ir embedded NiN2 monolayer can be further reduced to 0.24 V under -2% biaxial strain. Such findings are expected to be employed in more two-dimensional material-supported single metal atom catalyzed reactions.

Enhanced optical absorption in two-dimensional Ruddlesden-Popper (C6H5CH2NH3)2PbI4 perovskites via biaxial strain and surface doping.

Two-dimensional Ruddlesden-Popper (2D RP) perovskites can form layered protective materials using long organic cations as "barrier" caps, which is expected to solve the problem of instability of perovskites in the working environment. In this work, we systematically studied the 2D Ruddlesden-Popper (C6H5CH2NH3)2PbI4 hybrid perovskites using density functional theory. The results reveal that the 2D (C6H5CH2NH3)2PbI4 perovskites are semiconductors with band gaps of 2.22 eV. The optical absorption peak of the 2D (C6H5CH2NH3)2PbI4 perovskite structure is located at 532 nm in the visible region. Interestingly, the optical absorption spectrum of the 2D (C6H5CH2NH3)2PbI4 perovskite structure enhanced under suitable strains. The highest optical absorption peak appears in 2D (C6H5CH2NH3)2PbI4 under a -2% strain, and its theoretical photoelectric conversion efficiency is 28.5%. More interestingly, the replacement of surface I atoms with Br is another ways to enhance the optical absorption spectrum of the 2D (C6H5CH2NH3)2PbI4 perovskite structure. The optical absorption peak blue-shifts to the high energy region, which has higher solar energy flux density than the low energy region. The good stability, tuneable band gap and excellent theoretical photoelectric conversion efficiency of the 2D (C6H5CH2NH3)2PbI4 perovskite structure make it a promising candidate for novel 2D hybrid perovskite based photoelectronic devices and solar cells.

The unique photoelectronic properties of the two-dimensional Janus MoSSe/WSSe superlattice: a first-principles study.

Designing photocatalysts with suitable band alignment and considerable carrier mobility is extremely important. Here, by means of first-principles calculation, we systematically investigated the structural, photoelectronic, and carrier mobility behavior of the two-dimensional Janus MoSSe/WSSe superlattice. The results show that both armchair-type (AN-SL) and zigzag-type (ZN-SL) superlattices are relatively stable with negative Ef values in the range of -2.35 to -1.16 eV. Band gap and band edge position calculations demonstrate that these superlattices are completely suitable for water splitting by visible light. Particularly, the interface contact of the superlattice can be spontaneously changed from type-I to type-II when N > 4, facilitating separation of photogenerated carriers. Furthermore, the hole carrier mobility (µh) in AN-SL can be effectively regulated from 1200 to 2200 cm2 V-1 s-1, much larger than that of the isolated components. Interestingly, the disparity of hole/electron carrier mobility is remarkably large with an approximately 20-fold difference, showing the potential in prohibiting the recombination of photogenerated carriers. This unique behavior is further illustrated by the relaxation times of carriers, where the lifetime of hole carriers is about 7 times larger than that of electron carriers. These findings suggest that forming a Janus superlattice is a promising approach for regulating the photoelectronic properties of semiconductors, providing a promising way to design high efficiency photocatalysts.

P-block atom modified Sn(200) surface as a promising electrocatalyst for two-electron CO2 reduction: a first-principles study.

Low activity and poor product selectivity of CO2 reduction have seriously hampered its further practical application. Introducing p-block atoms to the catalyst is regarded as a promising strategy due to the versatility of p orbitals and diversity of p-block elements. Here, we systematically studied the influence of p-block atom X (X = C, N, O, S, and Se) on CO2 catalytic properties on a Sn(200) surface by first-principles calculation. Our work shows that all the p-block atoms are relative stable with Ef in the range of -5.11 to -3.59 eV. Further calculation demonstrates that the diversity of the p-block atoms results in unique CO2 electrocatalytic activity and product selectivity. Interestingly, the p-block C atom shows bi-functional activity to form two-electron products HCOOH and CO, with the corresponding energy barriers remarkably low at about 0.19 eV and 0.28 eV. In particular, the p-block S(Se) atom appears to have striking HCOOH selectivity, with the energy barrier to form HCOOH only a quarter of that to form the CO product. This unusual behavior is mainly attributed to the adsorption strength and frontier orbital interaction between the p-block atom and intermediates. These findings can effectively provide a valuable insight into the design of highly efficient CO2 electrocatalyst.

The oxygen vacancy in Li-ion battery cathode materials.

The substantial capacity gap between available anode and cathode materials for commercial Li-ion batteries (LiBs) remains, as of today, an unsolved problem. Oxygen vacancies (OVs) can promote Li-ion diffusion, reduce the charge transfer resistance, and improve the capacity and rate performance of LiBs. However, OVs can also lead to accelerated degradation of the cathode material structure, and from there, of the battery performance. Understanding the role of OVs for the performance of layered lithium transition metal oxides holds great promise and potential for the development of next generation cathode materials. This review summarises some of the most recent and exciting progress made on the understanding and control of OVs in cathode materials for Li-ion battery, focusing primarily on Li-rich layered oxides. Recent successes and residual unsolved challenges are presented and discussed to stimulate further interest and research in harnessing OVs towards next generation oxide-based cathode materials.

Injection of oxygen vacancies in the bulk lattice of layered cathodes.

Surfaces, interfaces and grain boundaries are classically known to be sinks of defects generated within the bulk lattice. Here, we report an inverse case by which the defects generated at the particle surface are continuously pumped into the bulk lattice. We show that, during operation of a rechargeable battery, oxygen vacancies produced at the surfaces of lithium-rich layered cathode particles migrate towards the inside lattice. This process is associated with a high cutoff voltage at which an anionic redox process is activated. First-principle calculations reveal that triggering of this redox process leads to a sharp decrease of both the formation energy of oxygen vacancies and the migration barrier of oxidized oxide ions, therefore enabling the migration of oxygen vacancies into the bulk lattice of the cathode. This work unveils a coupled redox dynamic that needs to be taken into account when designing high-capacity layered cathode materials for high-voltage lithium-ion batteries.

Enhanced optical absorption via cation doping hybrid lead iodine perovskites.

The suitable band structure is vital for perovskite solar cells, which greatly affect the high photoelectric conversion efficiency. Cation substitution is an effective approach to tune the electric structure, carrier concentration, and optical absorption of hybrid lead iodine perovskites. In this work, the electronic structures and optical properties of cation (Bi, Sn, and TI) doped tetragonal formamidinium lead iodine CH(NH2)2PbI3 (FAPbI3) are studied by first-principles calculations. For comparison, the cation-doped tetragonal methylammonium lead iodine CH3NH3PbI3 (MAPbI3) are also considered. The calculated formation energies reveal that the Sn atom is easier to dope in the tetragonal MAPbI3/FAPbI3 structure due to the small formation energy of about 0.3 eV. Besides, the band gap of Sn-doped MAPbI3/FAPbI3 is 1.30/1.40 eV, which is considerably smaller than the un-doped tetragonal MAPbI3/FAPbI3. More importantly, compare with the un-doped tetragonal MAPbI3/FAPbI3, the Sn-doped MAPbI3 and FAPbI3 have the larger optical absorption coefficient and theoretical maximum efficiency, especially for Sn-doped FAPbI3. The lower formation energy, suitable band gap and outstanding optical absorption of the Sn-doped FAPbI3 make it promising candidates for high-efficient perovskite cells.

Direct observation of multiple rotational stacking faults coexisting in freestanding bilayer MoS2.

Electronic properties of two-dimensional (2D) MoS2 semiconductors can be modulated by introducing specific defects. One important type of defect in 2D layered materials is known as rotational stacking fault (RSF), but the coexistence of multiple RSFs with different rotational angles was not directly observed in freestanding 2D MoS2 before. In this report, we demonstrate the coexistence of three RSFs with three different rotational angles in a freestanding bilayer MoS2 sheet as directly observed using an aberration-corrected transmission electron microscope (TEM). Our analyses show that these RSFs originate from cracks and dislocations within the bilayer MoS2. First-principles calculations indicate that RSFs with different rotational angles change the electronic structures of bilayer MoS2 and produce two new symmetries in their bandgaps and offset crystal momentums. Therefore, employing RSFs and their coexistence is a promising route in defect engineering of MoS2 to fabricate suitable devices for electronics, optoelectronics, and energy conversion.

Tuning band gaps and optical absorption of BiOCl through doping and strain: insight form DFT calculations.

Bismuth oxyhalides (BiOX, X = Cl, Br, and I) are a new family of promising photocatalysts. BiOCl and BiOBr possess large band gaps and weak absorption in visible light regions, which limit their applications. Although the band gap of BiOI is suitable to absorb most of the visible light, its redox capability is very weak. In this work, the doping and strain effects on the electronic structures and optical properties of BiOCl are explored using first principle calculations. The results show that doping in BiOCl, especially co-doping of Sb and I atoms, can obviously decrease the band gaps along with enhancing the optical absorption coefficients of pristine BiOCl because of the electronegativity difference between Sb/I atoms and Bi/Cl atoms. Meanwhile the band gap of BiOCl can be tuned under strain. This work offers potential strategies to enhance BiOCl absorption coefficients in the visible light region and its photocatalyst activity.

Effect of water on the effective Goldschmidt tolerance factor and photoelectric conversion efficiency of organic-inorganic perovskite: insights from first-principles calculations.

Water is often believed to be the leading killer of perovskite solar cells' efficiency. However, recent experimental results show that perovskite solar cells have higher photoelectric conversion efficiency in a suitably moist environment. In this study, the relationship between the interstitial water molecule and the theoretical maximum efficiency of the perovskite absorber layer is discussed based on density functional theory calculations. Our calculated results show that an interstitial water molecule can enlarge the effective Goldschmidt tolerance factor, which is an empirical structural parameter for the structure of the perovskite material. The primitive MAPbI3 structure is not the ideal perovskite structure with the highest photoelectric conversion efficiency. Surprisingly, appropriate interstitial water molecules are beneficial to perovskite absorbers in terms of increasing photoelectric conversion efficiency. This can be attributed to the relatively larger effective Goldschmidt tolerance factor of the perovskite structure with an interstitial water molecule, which affects the photoelectric conversion efficiency of the perovskite structure. Our calculations indicate that the perovskite absorbers with a H2O : MAPbI3 ratio of 1/4-1/2 have a relatively higher photoelectric conversion efficiency. This study helps us understand the role of the interstitial molecule in the perovskite structure deeply, which is very useful in the design and optimization of the perovskite absorbers for high-efficiency perovskite cells.

First-Principles Study of Novel Two-Dimensional (C4H9NH3)2PbX4 Perovskites for Solar Cell Absorbers.

Low-dimensional perovskites (A2BX4), in which the A cations are replaced by different organic cations, may be used for photovoltaic applications. In this contribution, we systematically study the two-dimensional (2D) (C4H9NH3)2PbX4 (X═Cl, Br and I) hybrid perovskites by density functional theory (DFT). A clear structures-properties relationship, with the photophysical characteristics directly related to the dimensionality and material compositions, was established. The strong s-p antibonding couplings in both bulk and monolayer (C4H9NH3)2PbI4 lead to low effective masses for both holes (mh*) and electrons (me*). However, mh* increases in proportion to the decreasing inorganic layer thickness, which eventually leads to a slightly shifted band edge emission found in 2D perovskites. Notably, the 2D (C4H9NH3)2PbX4 perovskites exhibit strong optical transitions in the visible light spectrum, and the optical absorption tunings can be achieved by varying the compositions and the layer thicknesses. Such work paves an important way to uncover the structures-properties relationship in 2D perovskites.

Unusual Li-Ion Transfer Mechanism in Liquid Electrolytes: A First-Principles Study.

Liquid electrolytes play an important role in commercial lithium-ion (Li-ion) batteries as a conduit for Li-ion transfer between anodes and cathodes. It is generally believed that the Li-ions move along with the salt ions; thus, Li-ion diffusion is only affected by the viscosity and salt concentration in the liquid electrolytes based on the Stokes-Einstein equation. In this study, a novel and faster Li-ion diffusion mechanism in electrolytes containing a cyanogen group is identified from first-principles molecular dynamics (FPMD) simulations. In this mechanism, the Li-ions are first detached from the Li-salt and then diffuse along with the solvent molecules, and the Li-ion diffusion does not obey the traditional Stokes-Einstein equation. The ionic conductivity of the electrolyte systems with this "solvent-assisted Li-ion diffusion" mechanism is further enhanced through Li-ion hopping. This novel Li-ion diffusion process explains recent findings of high Li-ion conductivity in electrolytes with cyanogen groups and furnishes a new paradigm for the design of fast-charging liquid electrolyte for Li-ion batteries.