Crystal structure of head-to-head dimers of cholic and deoxycholic acid derivatives with different symmetric bridges.

The crystal structure of three head-to-head dimers (having two cholic acid or deoxycholic acid units) linked at carbon atoms C3 by aromatic or alkyl bridges is studied. An internal coordinates system is necessary for describing the relative orientation in the space of the two bile acid residues. Five angles (three torsion and two common ones) are necessary for defining the relative position of both steroid residues in space. Carbon atoms C3 (which always carries a α-hydroxy group in natural bile acids), and C10 and C13 (which always carry ß-methyl groups) of each steroid residue are suitable for this purpose. Furthermore, the distance between each C3 carbon atoms of both steroid residues will allow one to locate the steroids in space. The three dimers selected provide a large range of values for these angles. The packing, hydrogen bond network, and location of guest in the three crystals are discussed.

Ice-like encapsulated water by two cholic acid moieties.

Starting from the structure of ice (in which each water molecule is surrounded by other four water molecules forming a tetrahedron with a value of 4.51Å for the edge O-O distance), and the knowledge that this value also corresponds to the O7-O12 distance of the skeleton of cholic acid, it is hypothesized that two steroid cholic acid moieties, with an appropriate steroid-steroid distance and a belly-to-belly orientation, could encapsulate a single water molecule between them. To check this hypothesis two succinyl derivatives of cholic acid (a monomer and the related head-head dimer in which the succinyl group is the linking bridge) were designed. The expected "ice-like" structure is found in the crystal of the dimer. There is a hydrogen bond synergy between those participating in the "ice-like" structure, and those in which the bridge is involved with the O7-H hydroxy group and the side chain of the steroid.

Additional criterion for the determination of the handedness of 2(1) helices in crystals of bile acids: Crystal structure of a tert-butylphenyl derivative of cholic acid.

[3ß,5ß,7α,12α]-3-(4-t-Butylbenzoilamine)-7,12-dihydroxycholan-24-oic acid was synthesized and recrystallized from chlorobenzene and acetone. Orthorhombic P2(1)2(1)2(1) and monoclinic P2(1) crystals were obtained, respectively, and both crystals include solvent and water molecules with a 1:1:1 stoichiometry. In the second case, there are two nonequivalent molecules of the steroid in the unit cell. In both crystals, a crossing structure results for the molecular packing, stabilized by hydrogen bonds between the steroid molecules. In the second crystal, water links steroid molecules of the same type, which are not directly connected through hydrogen bonds. The steroid molecules define helicoidal assemblies along 2(1) screw axes. The handedness in the crystal in chlorobenzene is unambiguously defined by following the criterion proposed by Miyata et al., as the steroids are in a belly-to-belly disposition around the axis. This motif does not appear in the crystal in acetone, and other criterion is required. On the basis of the fact that a staircase and its banister have the same handedness and using the crystal in chlorobenzene as reference, the additional criterion has been established. According to it, in the absence of a belly-to-belly orientation, the handedness must be defined by keeping the bile acid with its right side oriented toward the axis. Pitch angles of the helices and tilt angles of the molecules are also determined.

Influence of the solvent ability to form hydrogen bonds in the crystal structure of ([3beta,5beta,7alpha,12alpha]-3[(norbornyl-2-acetyl)-amino]-7,12-dihydroxycholan-24-oic acid (a norbornyl derivative of cholic acid).

A norbornyl-2-acetyl derivative of cholic acid ([3beta,5beta,7alpha,12alpha]-3[(norbornyl-2-acetyl)-amino]-7,12-dihydroxycholan-24-oic acid -NbCH2CA-) was synthesized and recrystallized in two dipolar aprotic solvents (acetone, DMSO) and in one protic solvent (2-propanol). In DMSO and acetone the crystals are orthorhombic, P2(1)2(1)2(1) (all their parameters being very similar) while in 2-propanol the crystal is monoclinic, P2(1). The inclusion complexes with the solvent have a 1:1 stochiometry with DMSO and acetone and 1:2 with 2-propanol. All solvents are forming a hydrogen bond with the amide bond of the bridge between the norbornyl residue and the steroid nucleus of the bile acid. In DMSO and acetone the beta side of the steroid groups lies in the same region facilitating hydrophobic interactions, and the molecules are disposed in an antiparallel orientation (the methyl groups having a beta interdigitation) forming bilayers. The width of the bilayers is 9.231 A and 8.859 A in DMSO and acetone, respectively. A lamellar structure is also evident for the crystal in 2-propanol (the width being 11.908 A), but the packing is different from the previous one since a sliding between the steroid groups is observed and the methyl groups are not interdigitated. Four different hydrogen bonds are established by every steroid molecule in the NbCH2CA/DMSO (or acetone) crystal. This hydrogen bond network interconnects the hydrophilic regions of the lamellar structure. The hydrogen bond network of the NbCH2CA:2-propanol crystal is different because of the different abilities of 2-propanol to form hydrogen bonds. The side chain has a ttti conformation in the two orthorhombic crystals, and a tgtg one in the monoclinic crystal.

Early stages of formation of branched host-guest supramolecular polymers.

A structural characterization of host-guest supramolecular copolymers, formed by an adamantane dimer and two beta-cyclodextrin trimers in aqueous solution, has been carried out by combining small angle X-ray scattering and light scattering experiments. A shape-reconstruction method was applied to the SAXS data to obtain relatively high-resolution conformation information, and a correlation with the experimental dynamic light scattering results was performed, by estimating the hydrodynamic radii of the reconstructed shape through a shell model method. When applied on the solutions of the trimers, the analysis provides a globular reconstructed shape with a hydrodynamic radius in agreement with the experimental one. For the polymers, elongated structures were inferred which grow both in length and in cross section by increasing the concentration. Depending on the beta-cyclodextrin trimer employed in the polymer preparation, polymerization degrees ranging between roughly 7 and 14 or 9 and 22 were obtained in the concentration range 4.00-10.0 or 3.10-6.60 mM of the trimer (6.00-15.0 or 4.65-9.90 mM of the dimer). Aggregation schemes were proposed accounting for the formation of hyperbranched, linear, and network like polymers. The experimental results are not far from those expected on the basis of the aggregation in hyperbranched structure, for which the growth of elongated aggregates can be predicted in the early stages of the polymerization. However, the coexistence of the other structures, in particular of the linear one, cannot be ruled out.

pH dependent in-out isomerism of an amino-beta-cyclodextrin derivative.

An amino derivative of beta-cyclodextrin [6-(6-aminehexanamide)-6-deoxy)-beta-cyclodextrin (6-betaCD)] was synthesized, and the formation of an intramolecular inclusion complex was studied by NMR techniques. The deprotonation/protonation of the amino group stimulates an in/out movement of the pendant group toward/from the cyclodextrin cavity, the protonated species lying outside the hydrophobic cyclodextrin cavity but the unprotonated one residing inside and outside the cavity. The protonation of the amino group is a fast exchange rate NMR time-scale process, but the chain movement is a slow one. The equilibrium constants of both processes were determined from 1H NMR experiments and the kinetic constants for the slow process were determined from exchange spectroscopy (EXSY) experiments.

Thermodynamics of formation of host-guest supramolecular polymers.

The interactions between three beta-cyclodextrin hosts (having 1-3 binding sites) and two adamantyl guests (having 1-2 binding sites) have been studied by ITC, ROESY, static and dynamic light scattering (SLS and DLS), and AFM and TEM techniques. The enthalpy and free energy values (determined from ITC experiments) evidence that the single interaction between one binding site of the guest and one binding site of the host is independent of the number of binding sites of the interacting species. The average values are deltaH degrees = -26.6 +/- 2.3 kJ mol(-1) and deltaG degrees = -30.4 +/- 3.2 kJ mol(-1), indicating that the process is mainly enthalpy driven. In all cases, the experimental molar ratio (from ITC experiments) agrees with the expected one from the number of binding sites of both the host and guest. The formation of polymer-like entities was demonstrated by SLS, DLS, AFM, and TEM measurements. The structure of polymers is linear when both the host and the guest are ditopic entities and dendritic (or Cayley tree type) when the host and the guest have three and two binding sites, respectively.

Crystal structure of the supramolecular linear polymer formed by the self-assembly of mono-6-deoxy-6-adamantylamide-beta-cyclodextrin.

Mono-6-deoxy-6-adamantylamide-beta-cyclodextrin-dimethylformamide-15H2O, C53H85NO35.C3H7NO.15H2O, crystallizes in the orthorhombic space group P2(1)2(1)2(1). The adamantyl group is inserted into the cyclodextrin cavity of the adjacent molecule, entering by the side of the secondary hydroxy rim, thus forming a supramolecular linear polymer by self-assembly. Adjacent macrocycles are linked into columns by hydrogen bonds involving the nearest glucose residues, and the structure is further stabilized by their involvement in hydrogen bonding with water molecules which reside in channels surrounding the polymer columns, thus acting as bridges between the cyclodextrin units. The centroid of the adamantyl group lies below the plane formed by the seven glycosidic O atoms of the host cyclodextrin, excluding water molecules from the secondary side of beta-cyclodextrin (beta-CD). Between the adamantyl group and the primary hydroxy rim of the cyclodextrin cavity lies a dimethylformamide molecule, which shields the hydrophobic adamantyl group from the primary hydroxy rim of its carrying beta-CD and excludes water molecules from the primary side of the beta-CD cavity.

Complexation of several fungicides with beta-cyclodextrin: determination of the association constants and isolation of the solid complexes.

The formation of inclusion complexes with beta-cyclodextrin was studied for several popular fungicides of different types: prochloraz, 2-phenylphenol, thiophanate methyl, 8-hydroxyquinoline, and benalaxyl. Phase solubility diagrams showed that in all cases complexation takes place, leading to an important increase of water solubility in prochloraz and benalaxyl. Equilibrium association constants could be determined from the phase solubility data and from NMR titrations in the case of 2-phenylphenol. Because of the low solubility of the complex formed between 8-hydroxyquinoline and beta-cyclodextrin, the corresponding association constant could not be determined. The solid complexes of fungicide-cyclodextrin were prepared and isolated by different methods. The isolation of real complexes and not physical mixtures was confirmed in the cases of prochloraz, 2-phenylphenol, and benalaxyl by differential scanning calorimetry.

Determination of second-order association constants by global analysis of 1H and 13C NMR chemical shifts. Application to the complexation of sodium fusidate and potassium helvolate by beta- and gamma-cyclodextrin.

The host-guest interaction between the steroid antibiotics sodium fusidate and potassium helvolate as guests and the hosts beta- and gamma-cyclodextrin was studied by 13C and 1H NMR techniques. The analysis of chemical shifts of individual nuclei leads to inconsistent values of the association constants and fails generally in the case of mixtures of 1:1 and 1:2 stoichiometries. The problem of parameter correlation is identified and the global analysis of two or more nuclei is proposed as a very effective method for the detection of complexes of higher stoichiometries and for the precise determination of the involved association constants. A matrix formulation of global analysis and the determination of confidence intervals is described. An analytical solution of the cubic equation, necessary for the description of higher order complexes, is presented in detail and its use together with commercial fitting software is compared with dedicated implementations. gamma-Cyclodextrin forms with both studied steroids, sodium fusidate and potassium helvolate, 1:1 complexes with high values of the association constants, K(1)=(60+/-24)x10(3)lmol(-1), and K(2)=(22+/-9)x10(3)lmol(-1), respectively. To the contrary, beta-cyclodextrin forms 1:1 and 1:2 (guest:host) complexes with both steroids, with moderate K(1) and low K(2) values (K(1)=(0.74+/-0.13)x10(3)lmol(-1), K(2)=(0.210+/-0.075)x10(3)lmol(-1)), and (K(1)=(2.42+/-0.87)x10(3)lmol(-1), K(2)=(0.06+/-0.09)x10(3)lmol(-1)), respectively.

Complexation of several benzimidazole-type fungicides with alpha- and beta-cyclodextrins.

The potential increase in water solubility of three benzimidazole-type fungicides (thiabendazole, carbendazim, and fuberidazole) due to complexation with alpha- and beta-cyclodextrins was investigated. Fluorescence emission spectra of the fungicides in the presence of different concentrations of the cyclodextrins were measured. Analysis of these spectra by the method of principal components global analysis (PCGA) yielded precise values for the association constants and the emission spectra of the fungicide-cyclodextrin inclusion complexes. Phase-solubility diagrams confirmed the formation of inclusion complexes between each of the fungicides and beta-cyclodextrin and showed significant increases of their solubilities due to complexation.