Quantifying and Decoupling Molecular Interactions of Ionic Liquids with Gold Electrodes.

This work combined gold colloid probe atomic force microscopy (AFM) with a quartz crystal microbalance (QCM) to accurately quantify the molecular interactions of fluorine-free phosphonium-based ionic liquids (ILs) with gold electrode surfaces. First, the interactions of ILs with the gold electrode per unit area (FA', N/m2) were obtained via the force-distance curves measured by gold probe AFM. Second, a QCM was employed to detect the IL amount to acquire the equilibrium number of IL molecules adsorbed onto the gold electrode per unit area (NIL, Num/m2). Finally, the quantified molecular interactions of ILs with the gold electrode (F0, nN/Num) were estimated. F0 is closely related to the IL composition, in which the IL with the same anion but a longer phosphonium cation exhibits a stronger molecular interaction. The changes in the quantified interactions of gold with different ILs are consistent with the interactions predicted by the extended Derjaguin-Landau-Verwey-Overbeek theory, and the van der Waals interaction was identified as the major contribution of the overall interaction. The quantified molecular interaction is expected to enable the direct experimental-derived interaction parameters for molecular simulations and provide the virtual design of novel ILs for energy storage applications.

High Energy Density Supercapacitors: An Overview of Efficient Electrode Materials, Electrolytes, Design, and Fabrication.

Supercapacitors (SCs) are potentially trustworthy energy storage devices, therefore getting huge attention from researchers. However, due to limited capacitance and low energy density, there is still scope for improvement. The race to develop novel methods for enhancing their electrochemical characteristics is still going strong, where the goal of improving their energy density to match that of batteries by increasing their specific capacitance and raising their working voltage while maintaining high power capability and cutting the cost of production. In this light, this paper offers a succinct summary of current developments and fresh insights into the construction of SCs with high energy density which might help new researchers in the field of supercapacitor research. From electrolytes, electrodes, and device modification perspectives, novel applicable methodologies were emphasized and explored. When compared to conventional SCs, the special combination of electrode material/composites and electrolytes along with their fabrication design considerably enhances the electrochemical performance and energy density of the SCs. Emphasis is placed on the dynamic and mechanical variables connected to SCs' energy storage process. To point the way toward a positive future for the design of high-energy SCs, the potential and difficulties are finally highlighted. Further, we explore a few important topics for enhancing the energy densities of supercapacitors, as well as some links between major impacting factors. The review also covers the obstacles and prospects in this fascinating subject. This gives a fundamental understanding of supercapacitors as well as a crucial design principle for the next generation of improved supercapacitors being developed for commercial and consumer use.

Structurally flexible pyrrolidinium- and morpholinium-based ionic liquid electrolytes.

Ion transport measures and details as well as physico-chemical and electrochemical properties are presented for a small set of structurally flexible pyrrolidinium (Pyrr) and morpholinium (Morph) cation-based ionic liquids (ILs), all with oligoether phosphate-based anions. All have high thermal stabilities, low glass transition temperatures, and wide electrochemical stability windows, but rather moderate ionic conductivities, where both the anions and the cations of the Pyrr-based ILs diffuse faster than those of the Morph-based ILs. Overall, the Pyrr-based ILs show significantly more promise as high-temperature supercapacitor electrolytes, rendering a specific capacitance of 164 F g-1 at 1 mV s-1, a power density of 609 W kg-1 and a specific energy density of 27 W h kg-1 at 90 °C in a symmetric graphite supercapacitor.

Effects of Graphene-Based Metal Composite and Urea on Seed Germination and Performance of Berberis chitria Buch.-Ham. ex Lindl.

Being an important source of berberine, Berberis chitria Buch.-Ham. ex Lindl. (Berberidaceae) has high demand in pharmaceutical industries. Its populations are diminishing due to overexploitation, habitat loss, slow-growing nature, and climate change. It is important to develop propagation protocols to sustain its natural populations and ensure its survival in the future. Fertilizers play an essential role in the yield and productivity of different crops. Among others, urea is the most abundantly used fertilizer in crops. Its effects on the yield and survival of medicinal plants are poorly studied. However, it is known that applying urea for a long time affects the soil negatively. Due to these negative effects, alternative fertilizers such as graphene-based metal composite (GMC) are being tested for their efficiency. In the present study, for the first time, we tested the effects of urea and GMC on the germination and performance of B. chitria. GMC showed maximum germination at 30 ppm (75%) and urea at 15 ppm (79%). Findings reveal non-significant effects of GMC and urea on germination and performance of B. chitria, suggesting the use of GMC as an alternative fertilizer.

Recent advances in carbon-based materials for high-performance perovskite solar cells: gaps, challenges and fulfillment.

Presently, carbon-based nanomaterials have shown tremendous potential for energy conversion applications. Especially, carbon-based materials have emerged as excellent candidates for the fabrication of halide perovskite-based solar cells, which may lead to their commercialization. In the last decade, PSCs have rapidly developed, and these hybrid devices demonstrate a comparable performance to silicon-based solar cells in terms of power conversion efficiency (PCE). However, PSCs lag behind silicon-based solar cells due to their poor stability and durability. Generally, noble metals such gold and silver are employed as back electrode materials during the fabrication of PSCs. However, the use of these expensive rare metals is associated with some issues, urgently necessitating the search for cost-effective materials, which can realize the commercial applications of PSCs due to their interesting properties. Thus, the present review shows how carbon-based materials can become the main candidates for the development of highly efficient and stable PSCs. Carbon-based materials such as carbon black, graphite, graphene nanosheets (2D/3D), carbon nanotubes (CNTs), carbon dots, graphene quantum dots (GQDs) and carbon nanosheets show potential for the laboratory and large-scale fabrication of solar cells and modules. Carbon-based PSCs can achieve efficient and long-term stability for both rigid and flexible substrates because of their high conductivity and excellent hydrophobicity, thus showing good results in comparison to metal electrode-based PSCs. Thus, the present review also demonstrates and discusses the latest state-of-the-art and recent advances for carbon-based PSCs. Furthermore, we present perspectives on the cost-effective synthesis of carbon-based materials for the broader view of the future sustainability of carbon-based PSCs.

The effects of functionalized graphene oxide on the thermal and mechanical properties of liquid crystalline polymers.

Herein, we report a robust approach for the selective covalent functionalization of graphene oxide (GO) with 4-hydroxybenzoic acid (HBA) for developing polymeric nanocomposites based on liquid crystalline polymers (LCPs). The functionalization of GO with HBA was confirmed by Raman spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and X-ray diffraction (XRD) spectroscopy. The surface morphology of GO and functionalized GO (FGO) was studied using field emission scanning electron microscopy (FE-SEM). Furthermore, the interactions between FGO and LCPs have been investigated by FT-IR spectroscopy, whereas dispersion of GO and FGO in the LCP matrix was analyzed by FE-SEM. The better dispersion of FGO can be attributed to the hydrogen bonding and π-π stacking interactions between FGO and LCPs. Our results showed that even the addition of 5 wt% FGO in the LCP matrix significantly enhances the tensile strength and storage modulus of the pristine LCPs by 84% and 78% respectively. Compared to neat LCPs, FGO incorporated composites also demonstrate an improvement in the melting temperature (Tm) by 11 °C and glass transition temperature (Tg) by 12 °C. Furthermore, thermogravimetric analysis (TGA) was performed to evaluate the thermal stability of the composite. The 5 and 50% decomposition temperature for the LCP/FGO nanocomposites (containing 5 wt% FGO) increased by 75 °C and 107 °C respectively.

Vanadium pentaoxide-doped waste plastic-derived graphene nanocomposite for supercapacitors: a comparative electrochemical study of low and high metal oxide doping.

We report the bulk phase synthesis of graphene sheets using waste plastic (WP) as a precursor following a modified pyrolysis approach. Furthermore, the low and high mass loading of vanadium pentaoxide was performed on graphene sheets in 1 : 10 and 1 : 1 ratios, respectively. Advanced characterization techniques such as Raman spectroscopy, FT-IR spectroscopy, X-ray diffraction (XRD) analysis, thermogravimetric analysis (TGA) analysis, and SEM imaging were used to confirm the synthesis of graphene. FT-IR spectroscopy confirmed that the resonating structure affects the bond strength in the composite, which enables peak shifting in the FT-IR spectrum of the composite. Furthermore, bandgap analysis has been performed using UV-Vis spectroscopy, which confirmed the synthesis of the composites. The developed vanadium-doped graphene was used as the active material for the fabrication of supercapacitor electrodes. The electrochemical performance of these devices was evaluated in 1 M H3PO4 solution using cyclic voltammetry (CV), galvanic charge-discharge (GCD) analysis, and electrochemical impedance spectroscopy (EIS). Fabricated cells 1 and 2 showed exceptional specific capacitances of 139.7 F g-1 and 51.2 F g-1 at 5 mV s-1 scan rate, respectively. Cell 1 showed a huge power density of 5312 W kg-1 and an energy density of 19.7 W h kg-1. Conversely, cell 2 showed a comparatively lower power density of 1941 W kg-1 and an energy density of 7.2 W h kg-1 at a 5 mV s-1 scan rate. Moreover, we disclose some brief conclusions on the performance, mechanism, and required modifications that can improve the performance of such devices. This approach can surely help with universal WP problems as well as the development of high-performance supercapacitors.

3D graphene nanosheets from plastic waste for highly efficient HTM free perovskite solar cells.

Herein, we report the first time application of waste plastic derived 3D graphene nanosheets (GNs) for hole transport material (HTM) free perovskite solar cells (PSCs), where 3D GNs have been employed as an electrode dopant material in monolithic carbon electrode based mesoscopic PSCs. Waste plastics were upcycled into high-quality 3D GNs by using two-step pyrolysis processes, where, a nickel (99.99%) metal mesh was taken as the catalytic and degradation template to get an acid free route for the synthesis of 3D GNs. Raman spectroscopy, HRTEM analysis and XRD analysis show the presence of 1-2 graphene layers within the 3D GNs. Further, the optical band gap study has also been performed to analyze the applicability of 3D GNs for PSCs. The optimized device with 3D GNs shows a power conversion efficiency (PCE) of 12.40%, whereas the carbon-based control device shows a PCE of 11.04%. Further, all other device parameters such as short circuit current (J sc), open circuit voltage (V oc) and fill factor (FF) have been improved with the addition of 3D GNs. The performance enhancement in 3D GN doped HTM free PSC solar cells is attributed to the enhancement in conductivity and reduced recombination within the device. Further, the photocurrent study shows that the 3D GN device shows better performance as compared to the reference device due to the larger diffusion current. Thus, the upcycling of waste plastics into 3D GNs and their exploitation for application in energy conversion show an effective and potential way to convert waste into energy.

Mass production of metal-doped graphene from the agriculture waste of Quercus ilex leaves for supercapacitors: inclusive DFT study.

This work reports a facile, eco-friendly, and cost-effective mass-scale synthesis of metal-doped graphene sheets (MDGs) using agriculture waste of Quercus ilex leaves for supercapacitor applications. A single step-degradation catalyst-based pyrolysis route was used for the manufacture of MDGs. Obtained MDGs were further evaluated via advanced spectroscopy and microscopic techniques including Raman spectroscopy, FT-IR, XRD, SEM/EDX, and TEM imaging. The Raman spectrum showed D and G bands at 1300 cm-1 and 1590 cm-1, respectively, followed by a 2D band at 2770 cm-1, which confirmed the synthesis of few-layered MDGs. The SEM/EDX data confirmed the presence of 6.15%, 3.17%, and 2.36% of potassium, calcium and magnesium in the obtained MDGs, respectively. Additionally, the FT-IR, XRD, TEM, and SEM data including the plot profile diagrams confirmed the synthesis of MDGs. Further, a computational study was performed for the structural validation of MDGs using Gaussian 09. The density functional theory (DFT) results showed a chemisorption/decoration pattern of doping for metal ions on the few-layered graphene nanosheets, rather than a substitutional pattern. Further, resulting MDGs were used as an active material for the fabrication of a supercapacitor electrode using the polymer gel of PVA-H3PO4 as the electrolyte. The fabricated device showed a decent specific capacitance of 18.2 F g-1 at a scan rate of 5 mV s-1 with a power density of 1000 W kg-1 at 5 A g-1.

A simple, eco-friendly and green approach to synthesis of blue photoluminescent potassium-doped graphene oxide from agriculture waste for bio-imaging applications.

2D carbon nanomaterials such as graphene and its oxide counterpart have sought good research attention for their application as well as fundamental interest. Especially the versatility of graphene oxide establishes its elite candidature in every field because of diverse application potential. Here we are reporting a greener, eco-friendly and cost effective one step hydrothermal route for the synthesis of potassium doped graphene oxide (K-doped GO) from agricultural waste i.e. Quercus ilex Fruit. The elemental analysis and XPS study showed the high percentage (6.81%) of natural doping of potassium. The K-doped GO is specific and demonstrates bright blue photoluminescence (PL) under UV-light (λex = 365 nm). Low toxicity, intracellular localization, good biocompatibility and strong PL properties of the synthesized K-doped GOs portray it as an excellent bio-imaging agent holding great promise in analytical and biological fields.