"There's just a lot of numbers and I just want to have a drink": The challenge of communicating the energy content of alcohol products.

Various governments are considering the implementation of energy labelling on alcohol products as one element of obesity prevention policies. However, little is known about the most effective ways to communicate energy information to consumers. The aim of the present study was to explore consumers' reactions to different energy information provision formats to assist the development of effective energy labels. Nine focus groups (n=83 participants) were conducted with Australian adults who reported drinking alcohol at least twice per month. Participants were exposed to an energy-only information label and labels displaying full nutrition information panels. A thematic analysis approach was used to identify key issues. While few participants were overtly enthusiastic about the mandatory display of energy values on alcohol products, there was general support for the provision of this information to assist those drinkers who could benefit from it. Substantial confusion was apparent as participants attempted to distil meaning from the provided information, particularly where it was expressed in terms of serving sizes and standard drinks. Full nutrition panels were especially problematic in terms of creating a health halo due to the nil or low values for multiple nutrients listed. This was especially notable for information relating to sugar content. Overall, there appears to be inadequate public understanding of the concept of dietary energy in alcoholic beverages and the various terms used to quantify its presence, which is likely to limit the utility of mandatory energy information provision requirements unless they are accompanied by effective community education.

Modifying the Health Star Rating nutrient profiling algorithm to account for ultra-processing.

AIM: To modify the Australian and New Zealand Health Star Rating to account for ultra-processing and compare the alignment of the modified ratings with NOVA classifications and the current Australian Dietary Guidelines classifications of core (recommended foods) and discretionary (foods to limit). METHODS: Data was cross-sectionally analysed for 25 486 products. Four approaches were compared to the original Health Star Rating: (1) five 'negative' points added to ultra-processed products (modification 1; inclusion approach); (2) ultra-processed products restricted to a maximum of 3.0 Health Stars (modification 2; capping approach); (3 and 4) same approach used for modifications 1 and 2 but only applied to products that already exceeded 10 'negative' points from existing Health Star Rating attributes (modifications 3 and 4, respectively; hybrid approaches). Alignment occurred when products (i) received <3.5 Health Stars and were NOVA group 4 (for NOVA comparison) or discretionary (for Dietary Guidelines comparison), or (ii) received ≥3.5 Health Stars and were NOVA groups 1-3 or core. RESULTS: All Health Star Rating modifications resulted in greater alignment with NOVA (ranging from 69% to 88%) compared to the original Health Star Rating (66%). None of the modifications resulted in greater alignment to the Dietary Guidelines classifications overall (69% to 76%, compared with 77% for the original Health Star Rating), but alignment varied considerably by food category. CONCLUSIONS: If ultra-processing were incorporated into the Australian and New Zealand Health Star Rating, consideration of ultra-processing within the broader dietary guidance framework would be essential to ensure coherent dietary messaging to Australians.

Increasing Use of Total Wrist Arthroplasty-An Australian National Joint Registry Report.

Background and Purpose There is limited literature reporting the long-term results and outcomes of total wrist arthroplasty (TWA). The aim of this study was to describe the incidence, usage, and survival of wrist arthroplasty using data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR). Methods Data included all primary TWA procedures from 2006 to 2021. The primary outcome assessed was revision surgery. Utilization of TWA, etiology leading to TWA, patient demographics, and surgical factors were also assessed. Results There were 439 primary TWA procedures performed across the 16-year reporting period. Four prostheses (Motec, Universal 2, Freedom, and ReMotion) have been used, with a recent increased usage toward the Motec, which accounted for 97.4% of prostheses implanted in 2021. There has also been an increase in the number of surgeons performing TWA over time. The most common underlying etiology was osteoarthritis (72.7%), followed by rheumatoid arthritis (15.9%). Implantation for inflammatory arthropathy remained relatively constant across time; however, TWA has been utilized with increasing frequency for the treatment of osteoarthritis and other indications more recently. The cumulative percent revision at 10 years was 18.3%. Loosening accounted for 25.6% of all revisions, followed by osteolysis (12.8%), pain (12.8%), and instability (7.7%). Attempted conversion to an arthrodesis occurred in 10.3% of all revisions. Conclusion There has been an increase in both the volume of TWA performed and the number of surgeons undertaking this procedure in Australia over the past 16 years. The Motec system has become the prosthesis of choice. Medium-term revision rates are inferior when compared with Australian data for hip, knee, and shoulder arthroplasty.

Switches in food and beverage product purchases can reduce greenhouse gas emissions in Australia.

Switching between similar food and beverage products may reduce greenhouse gas emissions (GHGe). Here, using consumer data linked to 23,550 product-specific GHGe values, we estimated annual GHGe attributable to product purchases consumed at home in Australia and calculated reductions from specific switches. Potential changes to mean Health Star Rating, mean energy density and the proportion of ultraprocessed foods purchased were assessed. Approximately 31 million tonnes of GHGe were attributable to products consumed at home in 2019, the three highest contributors of GHGe being 'meat and meat products' (49%), 'dairy' (17%) and 'non-alcoholic beverages' (16%). Switching higher-emission products for 'very similar' lower-emission products could reduce total emissions by 26%. Switches to 'less similar' lower-emission products could lead to a 71% reduction. Switches had little impact on the average Health Star Rating, energy density of purchases and proportion of ultraprocessed foods purchased. Directing manufacturing and marketing towards lower-environmental-impact products and signposting such options to consumers are key.

Added transverse screw in tripod construct increases stiffness in Mason III radial head fractures: a finite element analysis.

BACKGROUND: The tripod screw configuration has been shown to offer similar stiffness characteristics to a laterally placed plate. However, concern has been raised that the construct may be prone to failure in scenarios where the screw intersects at the fracture line. We performed a finite element analysis to assess potentially ideal and unideal screw placements in the tripod construct among Mason III radial head fractures. METHODS: A 3-dimensional proximal radius model was developed using a computed tomography scan of an adult male radius. The fracture site was simulated with a uniform gap in transverse and sagittal planes creating a Mason type III fracture pattern comprising 3 fragments. Three configurations were modeled with varying screw intersection points in relation to the radial neck fracture line. A fourth configuration comprising an added transverse interfragmentary screw was also modeled. Loading scenarios included axial and shear forces to simulate physiological conditions. Von Mises stress and displacement were used as outcomes for analysis. RESULTS: Some variation can be seen among the tripod configurations, with a marginal tendency for reduced implant stress and greater stiffness when screw intersection is further from the neck fracture region. The construct with an added transverse interfragmentary screw demonstrated greater stiffness (2269 N/mm) than an equivalent tripod construct comprising 3 screws (612 N/mm). CONCLUSION: The results from this study demonstrate biomechanical similarity between tripod screw constructs including where screws intersect at the radial neck fracture line. An added fourth screw, positioned transversely across fragments, increased construct stiffness in our model.

Assessing the Policy Implications of Different Definitions for Added Sugars: An Analysis Across the Australian Packaged Food and Beverage Supply.

Background: In recent years, various definitions of "added sugars" have emerged across jurisdictions. Although it is clear how these definitions differ, there is limited understanding of the policy implications associated with these variations. Objective: To test the potential policy implications of different definitions of "added sugars" on the Australian packaged food supply, we developed a method to estimate the content of "added sugars" in packaged foods and applied this to 3 different definitions of "added sugars": (i) United States Food and Drug Administration (US FDA) added sugar definition, (ii) the World Health Organization (WHO) free sugar definition, and (iii) a comprehensive definition that was developed from a review of the evidence on "added sugars." Methods: Using a representative sample of 25,323 Australian packaged foods, the "added sugar" content and proportion of products that contain "added sugar" under the 3 definitions were estimated. In addition, a comparative analysis exploring the impact of the US FDA definition (least comprehensive) vs. the comprehensive definition was conducted to understand potential implications of adopting different regulatory definitions in Australia. Results: The US FDA definition identified the lowest number and proportion of products with any "added sugars" at 14,380 products (representing 56.8% of all products), followed by the WHO free sugar definition at 15,168 products (59.9%) and the comprehensive definition at 16,260 products (64.2%). The mean estimates for "added sugars" were 8.5 g/100 g, 8.7 g/100 g, and 9.6 g/100 g for the US FDA, WHO, and comprehensive definitions, respectively. Compared with the US FDA definition, the comprehensive definition captured an additional 7.4% of products, largely driven by nonalcoholic beverages, special foods and fruit, vegetables, nuts, and legumes. Conclusions: Despite small variations in different "added sugars" definitions, their application has some significant policy implications. Findings highlight the importance of applying a comprehensive regulatory definition that adequately captures all sugars that have been linked to poor health.

Uptake of mandated pregnancy warnings in the Australian alcoholic ready-to-drink beverage market.

INTRODUCTION: A mandatory pregnancy warning was introduced in Australia 2020 to advise the public of the potential harms of prenatal alcohol exposure. Due to industry pressure, a 3-year implementation period was granted. The aim of this study was to analyse the extent to which the mandatory warning had been applied to ready-to-drink (RTD) alcohol product labels almost 2 years into the implementation period. METHODS: The sample included 491 RTD products sold in three alcohol stores in Sydney, Australia in March-May 2022. Identified warnings were categorised as a mandated warning, a DrinkWise warning (an industry-developed option) or 'Other' warning. Analyses were conducted overall and by RTD type. RESULTS: Almost all (94%) of the sampled RTD products had some form of pregnancy warning, but only 36% displayed the mandatory version. Of the non-mandatory warnings, 74% were DrinkWise warnings (42% of total sample) and 27% were 'Other' warnings (15% of total sample). There was no apparent relationship between alcohol content and likelihood of displaying a mandatory warning. DISCUSSION AND CONCLUSIONS: Two years into the three-year implementation period for the mandatory pregnancy warning, only around one-third of the assessed RTD products exhibited compliance. Uptake of the mandatory pregnancy warning appears to be slow. Continued monitoring will be required to determine whether the alcohol industry meets its obligations within and beyond the implementation period.

Distal humeral hemiarthroplasty compared to total elbow replacement for distal humeral fractures: a registry analysis of 906 procedures.

BACKGROUND: Total elbow replacement (TER) is an accepted treatment for complex intra-articular distal humerus fractures in elderly patients. Distal humeral hemiarthroplasty (HA) is also a potential surgical option for unreconstructable fractures and avoids the concerns regarding mechanical wear and functional restrictions associated with TER. In the current literature, there are limited data available to compare the revision rates of HA and TER for the treatment of fracture. We used data from a large national arthroplasty registry to compare the outcome of HA and TER undertaken for fracture/dislocation and to assess the impact of demographics and implant choice on revision rates. METHODS: Data obtained from the Australian Orthopaedic Association National Joint Replacement Registry from May 2, 2005, to December 31, 2021, included all procedures for primary elbow replacement with primary diagnosis of fracture or dislocation. The analyses were performed using Kaplan-Meier estimates of survivorship and hazard ratios (HRs) from Cox proportional hazards models. RESULTS: There were 293 primary HA and 631 primary TER procedures included. The cumulative percentage revision (CPR) rate at 9 years was 9.7% for HA (95% confidence interval [CI] 6.0, 15.7), and 11.9% (95% CI 8.5, 16.6) for TER. When adjusted for age and gender, there was a significantly higher risk of revision after 3 months for TER compared to HA (HR 2.47, 95% CI 1.22, 5.03, P = .012). There was no difference in the rate of revision for patients aged <55 years or ≥75 years when HA and TER procedures were compared. In primary TER procedures, loosening was the most common cause of revision (3.6% of primary TER procedures), and the most common type of revision in primary TER involved revision of the humeral component only (2.6% of TER procedures). TER has a higher rate of first revision for loosening compared to HA (HR 4.21, 95% CI 1.29, 13.73; P = .017). In HA procedures, instability (1.7%) was the most common cause for revision. The addition of an ulna component was the most common type of revision (2.4% of all HA procedures). CONCLUSION: For the treatment of distal humerus fractures, HA had a lower revision rate than TER after 3 months when adjusted for age and gender. Age <55 or ≥75 years was not a risk factor for revision when HA was compared to TER. Loosening leading to revision is more prevalent in TER and increases with time. In HA, the most common type of revision involved addition of an ulna component with preservation of the humeral component.

Criterion validation of nutrient profiling systems: a systematic review and meta-analysis.

BACKGROUND: Nutrient profiling systems (NPSs) use algorithms to evaluate the nutritional quality of foods and beverages. Criterion validation, which assesses the relationship between consuming foods rated as healthier by the NPS and objective measures of health, is essential to ensure the accuracy of NPSs. OBJECTIVE: We examined and compared NPSs that have undergone criterion validity testing in relation to diet-related disease risk and risk markers. METHODS: Academic databases were searched for prospective cohort and cross-sectional studies published before November, 2022. NPSs were eligible if they incorporated multiple nutrients or food components using an algorithm to determine an overall summary indicator (e.g., a score or rank) for individual foods. Studies were included if they assessed the criterion validity of an eligible NPS. Validation evidence was first summarized in narrative form by NPS, with random effects meta-analysis where ≥2 prospective cohort studies assessed the same NPS and outcomes. RESULTS: Of 4519 publications identified, 29 describing 9 NPSs were included in the review. The Nutri-Score NPS was assessed as having substantial criterion validation evidence. Highest compared with lowest diet quality as defined by the Nutri-Score was associated with significantly lower risk of cardiovascular disease (hazard ratio [HR]: 0.74; 95% confidence interval [CI]: 0.59, 0.93; n = 6), cancer (HR: 0.75; 95% CI: 0.59, 0.94; n = 5), all-cause mortality (HR: 0.74; 95% CI; 0.59, 0.91; n = 4) and change in body mass index (HR: 0.68; 95% CI: 0.50, 0.92; n = 3). The Food Standards Agency NPS, Health Star Rating, Nutrient Profiling Scoring Criterion, Food Compass, Overall Nutrition Quality Index, and the Nutrient-Rich Food Index were determined as having intermediate criterion validation evidence. Two other NPSs were determined as having limited criterion validation evidence. CONCLUSIONS: We found limited criterion validation studies compared with the number of NPSs estimated to exist. Greater emphasis on conducting and reporting on criterion validation studies across varied contexts may improve the confidence in existing NPSs.

Comparing product healthiness according to the Health Star Rating and the NOVA classification system and implications for food labelling systems: An analysis of 25 486 products in Australia.

We investigated the extent of alignment between 'healthiness' defined by a food classification system that classifies foods and beverages primarily by their nutrient composition, the Health Star Rating (HSR) and a system that considers only the degree of processing of the product, the NOVA classification system. We used data for 25 486 products contained within the George Institute for Global Health's Australian 2022 FoodSwitch Dataset. Agreement between the two systems in the proportion of products classified as 'healthier' (HSR ≥3.5 or NOVA group 1-3) or 'less healthy' (HSR <3.5 or NOVA group 4) was assessed using the κ statistic. There was 'fair' agreement (κ = 0.30, 95%CI: 0.29-0.31) between both systems in the proportion of all products classified as healthier or less healthy. Approximately one-third (n = 8729) of all products were defined as 'discordant', including 34.3% (n = 5620) of NOVA group 4 products with HSR ≥3.5 (commonly convenience foods, sports/diet foods, meat alternatives, as well as products containing non-sugar sweeteners) and 34.1% (n = 3109) of NOVA group 1-3 products with HSR <3.5 (commonly single-ingredient foods such as sugars/syrups, full-fat dairy and products specially produced to contain no ultra-processed ingredients). Our analysis strengthens the evidence for the similarities and differences in product healthiness according to a nutrient-based classification system and a processing-based classification system. Although the systems' classifications align for the majority of food and beverage products, the discordance found for some product categories indicates potential for confusion if systems are deployed alongside each other within food policies.

Shoulder joint arthroplasty in young patients: Analysis of 8742 patients from the Australian Orthopaedic Association National Joint Replacement Registry.

Background: Shoulder replacement is a reliable treatment for the relief of pain and improvement of function in patients with glenohumeral arthritis, rotator cuff arthropathy, osteonecrosis and fracture. Limited data is available comparing revision rates for the different types of shoulder replacement when used in younger patients. This study aims to compare the survivorship of hemi resurfacing, stemmed hemiarthroplasty, total shoulder arthroplasty and reverse total shoulder arthroplasty in younger patients using data from a large national arthroplasty registry. Methods: Data from the Australian Orthopaedic Association National Joint Replacement Registry was obtained for the period 16 April 2004-31 December 2018. The study population included all shoulder arthroplasty patients aged <65 years. These were stratified into two groups: <55 years and 55-64 years. A total of 8742 primary shoulder arthroplasty procedures were analysed (1936 procedures in the <55 years and 6806 in the 55-64 years age group). Results: In the <55 years age group, there was no difference in revision rate for total shoulder arthroplasty versus reverse total shoulder arthroplasty at any time point. Reverse total shoulder arthroplasty had a lower revision rate after six months when compared to hemi resurfacing (HRA) (p = 0.031). Also, reverse total shoulder arthroplasty had a higher early rate of revision in the first 12 months compared to hemiarthroplasty (p = 0.018). However, from 2 years reverse total shoulder arthroplasty had a lower revision rate overall (p = 0.029).In the 55-64 years patient age group, reverse total shoulder arthroplasty had a lower earlier revision rate. This was statistically significant compared to hemi resurfacing (HRA) (p = 0.028), hemiarthroplasty (p = 0.049) and total shoulder arthroplasty (p < 0.001). Conclusion: This study demonstrated that for patients aged <55 years there was no significant difference in the rate of revision when total shoulder arthroplasty and reverse total shoulder arthroplasty were compared. reverse total shoulder arthroplasty had a lower rate of revision when compared to hemi resurfacing and hemiarthroplasty after 2 years. reverse total shoulder arthroplasty had the lowest comparative revision rate in patients aged 55-64 years overall.

Survivorship of shoulder arthroplasty in young patients with osteoarthritis: an analysis of the Australian Orthopaedic Association National Joint Replacement Registry.

BACKGROUND: The treatment of shoulder osteoarthritis in the young patient remains challenging. The higher functional demands and higher expectations of the young patient cohort are often coupled with increased failure and revision rates. Consequently, shoulder surgeons are faced with a unique challenge with implant selection. The aim of this study was to compare the survivorship and reasons for revision of 5 classes of shoulder arthroplasty in patients aged <55 years with a primary diagnosis of osteoarthritis by use of data from a large national arthroplasty registry. METHODS: The study population included all primary shoulder arthroplasty procedures undertaken for osteoarthritis in patients aged <55 years and reported to the registry between September 1999 and December 2021. Procedures were grouped into the following classes: total shoulder arthroplasty (TSA), hemiarthroplasty resurfacing (HRA), hemiarthroplasty stemmed metallic head (HSMH), hemiarthroplasty stemmed pyrocarbon head (HSPH), and reverse total shoulder arthroplasty (RTSA). The outcome measure was the cumulative percent revision, which was defined using Kaplan-Meier estimates of survivorship to describe the time to the first revision. Hazard ratios (HRs) were calculated from Cox proportional hazards models, adjusting for age and sex, to compare revision rates among groups. RESULTS: There were 1564 shoulder arthroplasty procedures in patients aged <55 years, of which 361 (23.1%) were HRA, 70 (4.5%) were HSMH, 159 (10.2%) were HSPH, 714 (45.7%) were TSA, and 260 (16.6%) were RTSA. HRA had a higher rate of revision than RTSA after 1 year (HRA = 2.51 (95% CI 1.30, 4.83), P = .005), with no difference prior to that time. In addition, HSMH had a higher rate of revision than RTSA for the entire period (HR, 2.69 [95% confidence interval, 1.28-5.63], P = .008). There was no significant difference in the rate of revision for HSPH and TSA when they were compared with RTSA. Glenoid erosion was the most common cause of revision for HRA (28.6% of revisions) and HSMH (50%). Instability/dislocation was the leading cause of revision for RTSA (41.7%) and HSPH (28.6%), and for TSA, the majority of revisions were for either instability/dislocation (20.6%) or loosening (18.6%). CONCLUSION: These results should be interpreted within the context of the lack of availability of long-term data on RTSA and HSPH stems. RTSA outperforms all implants regarding revision rates at mid-term follow-up. The high early dislocation rate associated with RTSA, as well as the lack of revision options available to address this, indicates that careful selection of patients and a greater appreciation of anatomic risk factors are needed in the future.

Proximal Interphalangeal Joint Arthrodesis of the Hand Utilising a Rigid Intramedullary Device.

The proximal interphalangeal joint (PIPJ) is critical for proper finger and hand function. Arthritis of this joint can lead to significant pain and functional impairment. The APEX IP® Extremity Medical fusion device (Extremity Medical, Parsippany, New Jersey, USA) is an interlocking intramedullary screw device that provides a reliable method of hand PIPJ arthrodesis with good patient outcomes. We describe an easily reproducible surgical technique guide for using this device. Level of Evidence: Level V (Therapeutic).

Screw and Suspension Fixation for Bennett Fractures.

Bennett fractures are inherently unstable partial articular fractures of the base of the first metacarpal, often resulting from an axial load applied to a partially flexed metacarpal. Multiple options are available for the surgical stabilization of Bennett fractures; each option has associated drawbacks. We present a technique of fixation with headless compression screw(s), combined with suspension fixation, to overcome some of these limitations, with good results.

Presence of trans-Fatty Acids Containing Ingredients in Pre-Packaged Foods and the Availability of Reported trans-Fat Levels in Kenya and Nigeria.

In most African countries, the prevalence of industrially produced trans-fatty acids (iTFA) in the food supply is unknown. We estimated the number and proportion of products containing specific (any hydrogenated edible oils) and non-specific (vegetable fat, margarine, and vegetable cream) ingredients potentially indicative of iTFAs among pre-packaged foods collected in Kenya and Nigeria. We also summarized the number and proportion of products that reported trans-fatty acids levels and the range of reported trans-fatty acids levels. In total, 99 out of 5668 (1.7%) products in Kenya and 310 out of 6316 (4.9%) products in Nigeria contained specific ingredients indicative of iTFAs. Bread and bakery products and confectioneries in both countries had the most foods that contained iTFAs-indicative ingredients. A total of 656 products (12%) in Kenya and 624 products (10%) in Nigeria contained non-specific ingredients that may indicate the presence of iTFAs. The reporting of levels of trans-fatty acids was low in both Kenya and Nigeria (11% versus 26%, respectively, p < 0.001). With the increasing burden of ischemic heart disease in Kenya and Nigeria, the rapid adoption of WHO best-practice policies and the mandatory declaration of trans-fatty acids are important for eliminating iTFAs.

A comparison of early fixation of distal radius fractures versus late corrective osteotomy of distal radius malunion.

BACKGROUND: Fractures of the distal radius are common. Closed reduction and moulded casting is often the first line treatment. Malunion after casting is not uncommon and can lead to discussion on acute surgical fixation versus delayed corrective osteotomy if symptomatic. However, it is unclear if late surgery will provide similar outcomes as early intervention. METHODS: We performed a single centre, age matched, case series comparison study, comparing outcomes of patients who had undergone early fixation (ORIF) versus those who had undergone late corrective osteotomy (CO) following distal radius fracture. RESULTS: Twenty-six patients were available for review, 13 in each group. Fracture patterns were similar. Reviewing CO versus ORIF; patients achieved a mean DASH; 22 versus 18 (P = 0.355), PRWE; 35 versus 26 (P = 0.237), and VAS 2 versus 2 (P = 0.490). Grip strength was significantly better in those who had undergone ORIF; 2% versus -22% (P ≤ 0.001). Range of motion was generally better with primary fixation but of doubtful clinical importance, reviewing CO versus ORIF; Flexion 46° versus 60° (P = 0.045), extension 55° versus 64° (P = 0.137), pronation 73° versus 85° (P = 0.078), supination 84° versus 84° (P = 0.747), flexion/extension arc 101 versus 124 (P = 0.017), ulnar/radial deviation arc 42° versus 59° (P = 0.01), pronation/supination arc 157° versus 168° (P = 0.118). Ulnar variance was significantly improved in the ORIF group; +0.5 mm versus +2 mm in the CO group (P = 0.023). Radial inclination, radial height and volar tilt were not significantly different between either group. CONCLUSION: Our findings suggest that patient measured outcome of corrective osteotomy is not inferior to early internal fixation. LEVEL OF EVIDENCE: III (Case Series Comparison).

Protocol for a novel sodium and blood pressure reduction intervention targeting online grocery shoppers with hypertension - the SaltSwitch Online Grocery Shopping randomized trial.

BACKGROUND: High dietary sodium intake is a leading cause of hypertension. A major source of dietary sodium is salt added to processed food products available in retail food environments. The fast-growing online grocery shopping setting provides new opportunities for salt reduction interventions that support consumers in choosing healthier options. METHODS: The SaltSwitch Online Grocery Shopping randomized controlled trial is investigating the feasibility, acceptability, and effectiveness of a novel intervention for lowering salt consumption and blood pressure amongst people with hypertension who shop for groceries online. The intervention is based on a bespoke web browser extension that interfaces with a major retailer's online store to highlight and interpret product sodium content and suggest similar but lower-sodium alternatives. The primary outcome of interest is change in mean systolic blood pressure between individuals randomized (1:1) to the intervention and control (usual online shopping) arms at 12 weeks. Secondary outcomes are diastolic blood pressure, spot urinary sodium and sodium:potassium ratio, sodium purchases, and dietary intake. Intervention implementation and lessons for future uptake will be assessed using a mixed methods process evaluation. Participants with hypertension who shop online for groceries and exhibit high sodium purchasing behavior are being recruited across Australia. A target sample size of 1,966 provides 80% power (2-sided alpha = 0.05) to detect a 2 mm Hg difference in systolic blood pressure between groups, assuming a 15 mm Hg standard deviation, after allowing for a 10% dropout rate. DISCUSSION: This trial will provide evidence on an innovative intervention to potentially reduce salt intake and blood pressure in people with hypertension. The intervention caters to individual preferences by encouraging sustainable switches to similar but lower-salt products. If effective, the intervention will be readily scalable at low cost by interfacing with existing online retail environments.

The epidemiology of surfing injuries in a major Australian Centre - A ten year clinical audit.

INTRODUCTION: Australia is one of the largest surfing nations with over 10% of the population participating; yet there is a paucity of literature analysing the injuries from surfing participation, particularly injuries requiring orthopaedic care. This study retrospectively analyses surfing injuries presenting to a tertiary hospital Emergency Department over a ten-year period with aims of quantifying surfing injuries and investigating injury characteristics requiring orthopaedic input. METHODS: A retrospective clinical audit of presentations to Gold Coast Public Hospital Emergency Departments over a ten-year period was conducted using electronic hospital databases. Broad search teams were used to identify presentations, followed by exclusion based on relevance. Subsequent analysis of data was performed to investigate patient demographics and injury characteristics. RESULTS: A total of 2680 surfing related injury presentations were analysed. The median age was 30 years (range 2-77), with 455 females (17%) and 2225 males (83%). Lacerations were the most common injury type (37.9%), followed by ligament injury (21.3%), fractures (12.2%), and contusions (11.4%). The most common areas for lacerations were head/face (59.2%), lower limb (30%), and upper limb (26.5%). Dislocation rate was 4.9%, with shoulder dislocation (76.5%), and patella dislocation (12.1%) being the most common types. 1512 presentations (56.4%) required orthopaedic management. 93.5% did not require admission and were discharged. CONCLUSION: Over half (56.4%) of surfing injuries were orthopaedic in nature; requiring orthopaedic advice or management. Lacerations, ligament injury, fractures and dislocations were the most commonly managed injuries. This emphasises the importance of understanding the prevalence and characteristics of surfing injuries for an orthopaedic service.

Mid-term outcomes of pyrolytic carbon humeral resurfacing hemiarthroplasty compared with metal humeral resurfacing and metal stemmed hemiarthroplasty for osteoarthritis in young patients: analysis from the Australian Orthopaedic Association National Joint Replacement Registry.

BACKGROUND: The optimal surgical management of glenohumeral osteoarthritis in young patients remains an unsolved problem. Humeral resurfacing hemiarthroplasty and stemmed hemiarthroplasty using metallic heads are 2 surgical options that avoid the complications of loosening or wear of the glenoid component seen in total shoulder arthroplasty. Despite the potential benefits, improvement in survivorship has not been demonstrated from joint registry studies or other studies at mid-term follow-up. This is predominantly because of glenoid erosion and pain that occur when the metal resurfaced head articulates with the native glenoid. The use of pyrolytic carbon (pyrocarbon) as a resurfacing material has been proposed as an alternative bearing surface thought to reduce glenoid erosion owing to a marked reduction in wear rates in vitro. This study aimed to compare the survivorship of shoulder hemi-resurfacing using pyrocarbon with shoulder hemi-resurfacing and stemmed hemiarthroplasty using metallic heads. METHODS: Data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) were analyzed for all patients aged <55 years who had undergone a primary shoulder replacement for osteoarthritis from April 16, 2004, to December 31, 2019. The outcomes of shoulder procedures using pyrocarbon hemi-resurfacing were compared with procedures using metal hemi-resurfacing and metal stemmed hemiarthroplasty. The reasons for revision in each arthroplasty class were analyzed. The analyses were undertaken using Kaplan-Meier estimates of survivorship and hazard ratios (HRs) from Cox proportional hazards models. RESULTS: We analyzed 393 primary shoulder procedures, of which 163 were pyrocarbon hemi-resurfacing procedures, 163 were metal hemi-resurfacing procedures, and 67 were metal stemmed hemiarthroplasties.The cumulative percentage of revision at 6 years was 8.9% for pyrocarbon hemi-resurfacing, 17.1% for metal hemi-resurfacing, and 17.5% for metal stemmed hemiarthroplasty. Pyrocarbon hemi-resurfacing prostheses had a statistically lower revision rate than other hemi-resurfacing prostheses (HR, 0.41; 95% confidence interval, 0.18-0.93; P = .032). Pain, prosthesis fracture, and infection were the key reasons for revision. No pyrocarbon hemi-resurfacing cases were revised for glenoid erosion. In male patients, pyrocarbon humeral resurfacing had a lower cumulative percentage of revision compared with metal stemmed hemiarthroplasty (HR, 0.32; 95% confidence interval, 0.11-0.93; P = .037). CONCLUSION: Pyrocarbon humeral resurfacing arthroplasty had statistically lower revision rates at mid-term follow-up in patients aged <55 years compared with other hemi-resurfacing procedures.