Characterization optimization of synthesis Chitosanclay/benzoin/Fe3O4 composite for adsorption of Thionine dye by design expert study.

A novel composite material, magnetic chitosan-clay/benzoin/Fe3O4 (CS-CY/Benz/Fe3O4), was synthesized for effectively removing thionine dye (TH) from water solutions. The structural integrity and suitability of CS- CY/Benz/Fe3O4 composite for adsorption purposes were validated through extensive characterization techniques including BET, XRD, FTIR, and SEM. The adsorption efficiency was optimized through a Box-Behnken design (BBD) employing response surface methodology (RSM), focusing on variables such as adsorbent dose (A: 0.02-0.08 g), solution pH (B: 4-10), temperature (C: 30-60 °C), and time (D: 5-30 min). Experimental results revealed a maximum TH removal of 99% with significant interactions between temperature (C) and time (D) (p-value = 0.0001). The optimal conditions for TH removal were determined as pH ~ 5.91, adsorbent dosage of 0.08 g, temperature of 54.34 °C, and time of 29.7 min. The investigation of kinetics revealed that the adsorption process conformed to a pseudo-second-order (PSO) model, while the equilibrium data were effectively described by the Freundlich isotherm model. At a temperature of 333.15 K and a TH concentration of 350 mg/L, the adsorption capacity was determined to be 660.86 mg/g. The mechanism of adsorption encompassed various interactions such as electrostatic attractions, n-π interactions, hydrogen bonding, and Yoshida H-bonding. Particularly, the CS-CY/Benz/Fe3O4 composite demonstrated strong magnetic responsiveness, enabling straightforward separation from water using an external magnetic field after adsorption. Particularly, the CS-CY/Benz/Fe3O4 composite demonstrated strong magnetic responsiveness, enabling straightforward separation from water using an external magnetic field after adsorption. This research contributes important findings to the advancement of magnetic chitosan-based composites for efficient removal of TH dye pollutants from water environments.

Multifunctional assessment of copper-doped ZnO nanoparticles synthesized via gliding arc discharge plasma technique: antioxidant, antibacterial, and photocatalytic performance.

In this paper, undoped and copper-doped ZnO nanoparticles (NPs) were successfully synthesized using a gliding arc discharge (GAD) plasma technique, which is a sustainable, cost-effective, and scalable method. This method offers several advantages over traditional synthesis methods. The synthesized NPs were characterized by various techniques to understand their physicochemical properties. XRD analysis confirmed the presence of characteristic peaks of pure ZnO, while doped samples exhibited additional peaks corresponding to CuO crystal planes, indicating the successful incorporation of Cu into the lattice. As obvious, bare ZnO showed absorption peak at 378 nm corresponding to the band gap of 3.21 eV. The band gap of Cu-doped samples increased systematically, i.e., 3.35 eV for 2% Cu, 3.47 eV for 4% Cu, and 3.66 eV for 6% Cu. SEM images revealed aggregation and increase in particle size with the increasing in Cu concentration. EDAX analysis revealed a decrease in the weight percentage of oxygen and zinc with the increase in Cu concentration, suggesting structural changes within the lattice. Furthermore, the antibacterial activity against Gram-positive and Gram-negative bacteria, antioxidant activity, and photocatalytic activity against three different organic dyes such as Brilliant Cresyl Blue (BCB), Methylene Blue (MB), and Congo Red (CR) was studied. It is found that the photocatalytic activity of ZnO NPs varies with Cu concentration, leading to a decrease in its performance. The antibacterial activity of the NPs was also assessed, with undoped ZnO NPs showing dose-dependent effects against bacteria, while the Cu-doped ZnO NPs exhibited decreased efficacy. Interestingly, Cu doping significantly enhanced the antioxidant activity of the NPs compared to the undoped ZnO.

Improved Synthesis of Cu2O NPs and Ascorbic Acid-Modified Derivatives for Adsorption of Brilliant Cresyl Blue: Surface and Reusability Studies.

This study addresses the critical need for efficient and recyclable photocatalysts for water treatment applications by presenting a novel approach for the synthesis and characterization of copper (I) oxide (Cu2O) nanoparticles modified with ascorbic acid (Cu2O/AA). The motivation for this research stems from the increasing concern about environmental pollution caused by organic pollutants, such as Brilliant Cresyl Blue (BCB), and the necessity for sustainable solutions to mitigate this issue. Through comprehensive characterization techniques including Ultraviolet-Visible spectroscopy (UV-Vis), Fourier Transform Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), zeta potential measurements, and Brunauer-Emmett-Teller (BET) analysis, we demonstrate a significant modification to the electronic structure, enhancing the photocatalytic activity of Cu2O/AA. BET analysis revealed a mesoporous structure with a specific surface area of 2.7247 m2/g for Cu2O/AA, further emphasizing its potential for enhanced catalytic performance. The photocatalytic degradation studies showcased remarkable efficiency improvements, with degradation coefficients of 30.8% and 73.12% for Cu2O NPs and Cu2O/AA NC, respectively, within a 120 min timeframe. Additionally, recyclability experiments indicated sustained efficiency over five consecutive cycles, with both catalysts retaining crystalline integrity. These findings underscore the promising potential of Cu2O/AA nanoparticles as highly efficient and recyclable photocatalysts for the degradation of organic pollutants, offering superior performance compared to pure Cu2O NPs and addressing the pressing need for sustainable water treatment solutions.

Green Synthesized of Ag/Ag2O Nanoparticles Using Aqueous Leaves Extracts of Phoenix dactylifera L. and Their Azo Dye Photodegradation.

In this study, silver/silver oxide nanoparticles (Ag/Ag2O NPs) were successfully biosynthesized using Phoenix dactylifera L. aqueous leaves extract. The effect of different plant extract/precursor contractions (volume ratio, v/v%) on Ag/Ag2O NP formation, their optical properties, and photocatalytic activity towards azo dye degradation, i.e., Congo red (CR) and methylene blue (MB), were investigated. X-ray diffraction confirmed the crystalline nature of Ag/Ag2O NPs with a crystallite size range from 28 to 39 nm. Scanning electron microscope images showed that the Ag/Ag2O NPs have an oval and spherical shape. UV-vis spectroscopy showed that Ag/Ag2O NPs have a direct bandgap of 2.07-2.86 eV and an indirect bandgap of 1.60-1.76 eV. Fourier transform infrared analysis suggests that the synthesized Ag/Ag2O NPs might be stabilized through the interactions of -OH and C=O groups in the carbohydrates, flavonoids, tannins, and phenolic acids present in Phoenix dactylifera L. Interestingly, the prepared Ag/Ag2O NPs showed high catalytic degradation activity for CR dye. The photocatalytic degradation of the azo dye was monitored spectrophotometrically in a wavelength range of 250-900 nm, and a high decolorization efficiency (84.50%) was obtained after 50 min of reaction. As a result, the use of Phoenix dactylifera L. aqueous leaves extract offers a cost-effective and eco-friendly method.