F4 (K88) fimbrial adhesin FaeG expressed in alfalfa reduces F4+ enterotoxigenic Escherichia coli excretion in weaned piglets.

Transgenic plants are attractive bioreactors to large-scale production of recombinant proteins because of their relatively low cost. This study reports for the first time the use of transgenic plants to reduce enterotoxigenic Escherichia coli (ETEC) excretion in its natural host species. The DNA sequence encoding the major subunit and adhesin FaeG of F4+ ETEC was transformed into edible alfalfa plants. Targeting of FaeG production to chloroplasts led to FaeG levels of up to 1% of the total soluble protein fraction of the transgenic alfalfa. Recombinant plant-produced FaeG (pFaeG) remained stable for 2 years when the plant material was dried and stored at room temperature. Intragastric immunization of piglets with pFaeG induced a weak F4-specific humoral response. Co-administration of pFaeG and the mucosal adjuvant cholera toxin (CT) enhanced the immune response against FaeG, reflected a better induction of an F4-specific immune response. In addition, the intragastric co-administration of CT with pFaeG significantly reduced F4+ E. coli excretion following F4+ ETEC challenge as compared with pigs that had received nontransgenic plant material. In conclusion, transgenic plants producing the FaeG subunit protein could be used for production and delivery of oral vaccines against F4+ ETEC infections.

Antifungal activity of stilbenes in in vitro bioassays and in transgenic Populus expressing a gene encoding pinosylvin synthase.

The effect of two stilbene compounds, pinosylvin and resveratrol, on the growth of several fungi was evaluated in plate tests. Wood decay tests were carried out with birch and aspen samples impregnated with the two stilbenes. In plate experiments, resveratrol had an enhancing effect on growth at concentrations where pinosylvin was already enough to prevent the growth of most fungi studied. Pinosylvin impregnated at 0.2% (w/w) concentration significantly reduced the decay caused by all fungi except Phellinus tremulae. In contrast, a resveratrol content of 0.8%, did not protect the wood from decay. A pinosylvin-synthase-encoding gene from Pinus sylvestris was transferred into aspen ( Populus tremula) and two hybrid aspen clones ( Populus tremulax tremuloides) by Agrobacterium tumefaciens-mediated transformation. Transgenic plants accumulated pinosylvin synthase-specific mRNA and showed stilbene synthase enzyme activity in vitro. Transgenic aspen line H4 showed increased resistance to Phellinus tremulae, while two hybrid aspen transformants decayed faster than the control trees. However, we were unable to detect the accumulation of stilbenes in the transgenic plantlets.

A transcriptional roadmap to wood formation.

The large vascular meristem of poplar trees with its highly organized secondary xylem enables the boundaries between different developmental zones to be easily distinguished. This property of wood-forming tissues allowed us to determine a unique tissue-specific transcript profile for a well defined developmental gradient. RNA was prepared from different developmental stages of xylogenesis for DNA microarray analysis by using a hybrid aspen unigene set consisting of 2,995 expressed sequence tags. The analysis revealed that the genes encoding lignin and cellulose biosynthetic enzymes, as well as a number of transcription factors and other potential regulators of xylogenesis, are under strict developmental stage-specific transcriptional regulation.

Stable linker peptides for a cellulose-binding domain-lipase fusion protein expressed in Pichia pastoris.

Fusion proteins composed of a cellulose-binding domain from Neocallimastix patriciarum cellulase A and Candida antarctica lipase B were constructed using different linker peptides. The aim was to create proteolytically stable linkers that were able to join the functional modules without disrupting their function. Six fusion variants containing linkers of 4-44 residues were expressed in Pichia pastoris and analysed. Three variants were found to be stable throughout 7-day cultivations. The cellulose-binding capacities of fusion proteins containing short linkers were slightly lower compared with those containing long linkers. The lipase-specific activities of all variants, in solution or immobilized on to cellulose, were equal to that of the wild-type lipase.

beta-fluoro-coniferyl alcohol does not inhibit lignin biosynthesis in suspension cultures of Picea abies (L.) Karst.

A fluorinated analogue of coniferyl alcohol has been reported to be a specific inhibitor of oxidases involved in the biosynthesis of lignin. The Z isomer of beta-fluoro-coniferyl alcohol was synthesized and used for the preparation of dehydrogenation polymers (DHPs) and was also tested on lignin producing suspension cultures of spruce (Picea abies (L.) Karst.). The growth of the cells or the production of lignin by the suspension cultures was not significantly affected by the addition of fluoroconiferyl alcohol. This analogue did not form polymers quite as easily as did coniferyl alcohol in oxidation with hydrogen peroxide and horseradish peroxidase. In both cases the beta-fluoroconiferyl alcohol became incorporated in the polymeric product. We were unable to detect any specific inhibition of peroxidase activity, which is at variance with earlier reports of pronounced inhibition of lignin biosynthesis in poplar plantlets by fluoroconiferin, a potential inhibitor of oxidases involved in lignin biosynthesis.

A vacuolar sorting domain may also influence the way in which proteins leave the endoplasmic reticulum.

Protein sorting to plant vacuoles is known to be dependent on a considerable variety of protein motifs recognized by a family of sorting receptors. This can involve either traffic from the endoplasmic reticulum (ER) through the Golgi apparatus or direct ER-to-vacuole transport. Barley aspartic protease (Phytepsin) was shown previously to reach the vacuole via trafficking through the Golgi apparatus. Here we show that Phytepsin normally exits the ER in a COPII-mediated manner, because the Phytepsin precursor accumulates in the ER upon specific inhibition of the formation of COPII vesicles in vivo. Phytepsin differs from its yeast and mammalian counterparts by the presence of a saposin-like plant-specific insert (PSI). Deletion of this domain comprising 104 amino acids causes efficient secretion of the truncated molecule (Phytepsin Delta PSI) without affecting the enzymatic activity of the enzyme. Interestingly, deletion of the PSI also changes the way in which Phytepsin exits the ER. Inhibition of COPII vesicle formation causes accumulation of the Phytepsin precursor in the ER but has no effect on the secretion of Phytepsin Delta PSI. This suggests either that vacuolar sorting commences at the ER export step and involves recruitment into COPII vesicles or that the PSI domain carries two signals, one for COPII-dependent export from the ER and one for vacuolar delivery from the Golgi. The relevance of these observations with respect to the bulk flow model of secretory protein synthesis is discussed.

Generation of metal-binding staphylococci through surface display of combinatorially engineered cellulose-binding domains.

Ni(2+)-binding staphylococci were generated through surface display of combinatorially engineered variants of a fungal cellulose-binding domain (CBD) from Trichoderma reesei cellulase Cel7A. Novel CBD variants were generated by combinatorial protein engineering through the randomization of 11 amino acid positions, and eight potentially Ni(2+)-binding CBDs were selected by phage display technology. These new variants were subsequently genetically introduced into chimeric surface proteins for surface display on Staphylococcus carnosus cells. The expressed chimeric proteins were shown to be properly targeted to the cell wall of S. carnosus cells, since full-length proteins could be extracted and affinity purified. Surface accessibility for the chimeric proteins was demonstrated, and furthermore, the engineered CBDs, now devoid of cellulose-binding capacity, were shown to be functional with regard to metal binding, since the recombinant staphylococci had gained Ni(2+)-binding capacity. Potential environmental applications for such tailor-made metal-binding bacteria as bioadsorbents in biofilters or biosensors are discussed.

Efficient enantioselective separation of drug enantiomers by immobilised antibody fragments.

There is an increasing need for methods for efficient enantioselective separation and purification of chiral drugs. Genetic engineering provides the means for generating recombinant antibodies exhibiting extremely high specificity for even small molecular mass compounds. Here, recombinant antibody fragments have been generated for the drug diarylalkyltriazole that contains two chiral centres. Immobilised antibody fragments has been used successfully for efficient, step-wise separation of two enantiomers of the drug. Owing to the antibody specificity, one enantiomer came out in the flow-through, while the bound enantiomer could be specifically eluted. One of the antibodies tolerated solvents required both for dissolving the target molecules and for their elution for extended times and was shown to function over multiple cycles of the separation process.

Engineering of a glycosidase Family 7 cellobiohydrolase to more alkaline pH optimum: the pH behaviour of Trichoderma reesei Cel7A and its E223S/ A224H/L225V/T226A/D262G mutant.

The crystal structures of Family 7 glycohydrolases suggest that a histidine residue near the acid/base catalyst could account for the higher pH optimum of the Humicola insolens endoglucanase Cel7B, than the corresponding Trichoderma reesei enzymes. Modelling studies indicated that introduction of histidine at the homologous position in T. reesei Cel7A (Ala(224)) required additional changes to accommodate the bulkier histidine side chain. X-ray crystallography of the catalytic domain of the E223S/A224H/L225V/T226A/D262G mutant reveals that major differences from the wild-type are confined to the mutations themselves. The introduced histidine residue is in plane with its counterpart in H. insolens Cel7B, but is 1.0 A (=0.1 nm) closer to the acid/base Glu(217) residue, with a 3.1 A contact between N(epsilon2) and O(epsilon1). The pH variation of k(cat)/K(m) for 3,4-dinitrophenyl lactoside hydrolysis was accurately bell-shaped for both wild-type and mutant, with pK(1) shifting from 2.22+/-0.03 in the wild-type to 3.19+/-0.03 in the mutant, and pK(2) shifting from 5.99+/-0.02 to 6.78+/-0.02. With this poor substrate, the ionizations probably represent those of the free enzyme. The relative k(cat) for 2-chloro-4-nitrophenyl lactoside showed similar behaviour. The shift in the mutant pH optimum was associated with lower k(cat)/K(m) values for both lactosides and cellobiosides, and a marginally lower stability. However, k(cat) values for cellobiosides are higher for the mutant. This we attribute to reduced non-productive binding in the +1 and +2 subsites; inhibition by cellobiose is certainly relieved in the mutant. The weaker binding of cellobiose is due to the loss of two water-mediated hydrogen bonds.

Directed immobilization of recombinant staphylococci on cotton fibers by functional display of a fungal cellulose-binding domain.

The immobilization of recombinant staphylococci onto cellulose fibers through surface display of a fungal cellulose-binding domain (CBD) was investigated. Chimeric proteins containing the CBD from Trichoderma reesei cellulase Cel6A were found to be correctly targeted to the cell wall of Staphylococcus carnosus cells, since full-length proteins could be extracted and affinity-purified. Furthermore, surface accessibility of the CBD was verified using a monoclonal antibody and functionality in terms of cellulose-binding was demonstrated in two different assays in which recombinant staphylococci were found to efficiently bind to cotton fibers. The implications of this strategy of directed immobilization for the generation of whole-cell microbial tools for different applications will be discussed.

Alpha-amylase inhibitors selected from a combinatorial library of a cellulose binding domain scaffold.

A disulfide bridge-constrained cellulose binding domain (CBD(WT)) derived from the cellobiohydrolase Cel7A from Trichoderma reesei has been investigated for use in scaffold engineering to obtain novel binding proteins. The gene encoding the wild-type 36 aa CBD(WT) domain was first inserted into a phagemid vector and shown to be functionally displayed on M13 filamentous phage as a protein III fusion protein with retained cellulose binding activity. A combinatorial library comprising 46 million variants of the CBD domain was constructed through randomization of 11 positions located at the domain surface and distributed over three separate beta-sheets of the domain. Using the enzyme porcine alpha-amylase (PPA) as target in biopannings, two CBD variants showing selective binding to the enzyme were characterized. Reduction and iodoacetamide blocking of cysteine residues in selected CBD variants resulted in a loss of binding activity, indicating a conformation dependent binding. Interestingly, further studies showed that the selected CBD variants were capable of competing with the binding of the amylase inhibitor acarbose to the enzyme. In addition, the enzyme activity could be partially inhibited by addition of soluble protein, suggesting that the selected CBD variants bind to the active site of the enzyme.

GRCD1, an AGL2-like MADS box gene, participates in the C function during stamen development in Gerbera hybrida.

Despite the differences in flower form, the underlying mechanism in determining the identity of floral organs is largely conserved among different angiosperms, but the details of how the functions of A, B, and C are specified varies greatly among plant species. Here, we report functional analysis of a Gerbera MADS box gene, GRCD1, which is orthologous to AGL2-like MADS box genes. Members of this group of genes are being reported in various species in growing numbers, but their functions remained largely unsettled. GRCD1 expression is detected in all four whorls, but the strongest signal is seen in the developing stamen and carpel. Downregulating GRCD1 expression by antisense transformation revealed that lack of GRCD1 caused homeotic changes in one whorl only: sterile staminodes, which normally develop in whorl 3 of marginal female florets, were changed into petals. This indicates that the GRCD1 gene product is active in determining stamen identity. Transgenic downregulation of GRCD1 causes a homeotic change similar to that in the downregulation of the Gerbera C function genes GAGA1 and GAGA2, but one that is limited to whorl 3. Downregulation of GRCD1 expression does not reduce expression of GAGA1 or GAGA2, or vice versa; and in yeast two-hybrid analysis, GRCD1 is able to interact with GAGA1 and GAGA2. We propose that a heterodimer between the GRCD1 and GAGA1/2 gene products is needed to fulfill the C function in whorl 3 in Gerbera.

Characterization of Trichoderma reesei cellobiohydrolase Cel7A secreted from Pichia pastoris using two different promoters.

Heterologous expression of T. reesei cellobiohydrolase Cel7A in a methylotrophic yeast Pichia pastoris was tested both under the P. pastoris alcohol oxidase (AOX1) promoter and the glyceraldehyde-3-phosphate dehydrogenase (GAP) promoter in a fermentor. Production of Cel7A with the AOX1 promoter gave a better yield, although part of the enzyme expressed was apparently not correctly folded. Cel7A expressed in P. pastoris is overglycosylated at its N-glycosylation sites as compared to the native T. reesei protein, but less extensive than Cel7A expressed in Saccharomyces cerevisiae. The k(cat) and K(m) values for the purified protein on soluble substrates are similar to the values found for the native Trichoderma Cel7A, whereas the degradation rate on crystalline substrate (BMCC) is somewhat reduced. The measured pH optimum also closely resembles that of purified T. reesei Cel7A. Furthermore, the hyperglycosylation does not affect the thermostability of the enzyme monitored with tryptophane fluorescence and activity measurements. On the other hand, CD measurements indicate that the formation of disulfide bridges is an important step in the correct folding of Cel7A and might explain the difficulties encountered in heterologous expression of T. reesei Cel7A. The constitutive GAP promoter expression system of P. pastoris is nevertheless well suited for activity screening of cellulase activities in microtiter plates. With this type of screening method a faster selection of site-directed and random mutants with, for instance, an altered optimum pH is possible, in contrast to the homologous T. reesei expression system.

Crystallographic evidence for substrate ring distortion and protein conformational changes during catalysis in cellobiohydrolase Ce16A from trichoderma reesei.

BACKGROUND: Cel6A is one of the two cellobiohydrolases produced by Trichoderma reesei. The catalytic core has a structure that is a variation of the classic TIM barrel. The active site is located inside a tunnel, the roof of which is formed mainly by a pair of loops. RESULTS: We describe three new ligand complexes. One is the structure of the wild-type enzyme in complex with a nonhydrolysable cello-oligosaccharide, methyl 4-S-beta-cellobiosyl-4-thio-beta-cellobioside (Glc)(2)-S-(Glc)(2), which differs from a cellotetraose in the nature of the central glycosidic linkage where a sulphur atom replaces an oxygen atom. The second structure is a mutant, Y169F, in complex with the same ligand, and the third is the wild-type enzyme in complex with m-iodobenzyl beta-D-glucopyranosyl-beta(1,4)-D-xylopyranoside (IBXG). CONCLUSIONS: The (Glc)(2)-S-(Glc)(2) ligand binds in the -2 to +2 sites in both the wild-type and mutant enzymes. The glucosyl unit in the -1 site is distorted from the usual chair conformation in both structures. The IBXG ligand binds in the -2 to +1 sites, with the xylosyl unit in the -1 site where it adopts the energetically favourable chair conformation. The -1 site glucosyl of the (Glc)(2)-S-(Glc)(2) ligand is unable to take on this conformation because of steric clashes with the protein. The crystallographic results show that one of the tunnel-forming loops in Cel6A is sensitive to modifications at the active site, and is able to take on a number of different conformations. One of the conformational changes disrupts a set of interactions at the active site that we propose is an integral part of the reaction mechanism.

Design of a pH-dependent cellulose-binding domain.

Protein-carbohydrate interactions typically rely on aromatic stacking interactions of tyrosine, phenylalanine and tryptophan side chains with the sugar rings whereas histidine residues are rarely involved. The small cellulose-binding domain of the Cel7A cellobiohydrolase (formerly CBHI) from Trichoderma reesei binds to crystalline cellulose primarily using a planar strip of three tyrosine side chains. Binding of the wild-type Cel7A CBD is practically insensitive to pH. Here we have investigated how histidine residues mediate the binding interaction and whether the protonation of a histidine side chain makes the binding sensitive to pH. Protein engineering of the Cel7A CBD was thus used to replace the tyrosine residues in two different positions with histidine residues. All of the mutants exhibited a clear pH-dependency of the binding, in clear contrast to the wild-type. Although the binding of the mutants at optimal pH was less than for the wild-type, in one case, Y31H, this binding almost reached the wild-type level.

Organ identity genes and modified patterns of flower development in Gerbera hybrida (Asteraceae)

We have used Gerbera hybrida (the cultivated ornamental, gerera) to investigate the molecular basis of flower development in Asteraceae, a family of flowering plants that have heteromorphic flowers and specialized floral organs. Flowers of the same genotype may differ in a number of parameters, including sex expression, symmetry, sympetaly and pigmentation. In order to study the role of organ identity determination in these phenomena we isolated and functionally analysed six MADS box genes from gerbera; these were shown by phylogenetic analysis to be orthologous to well characterized regulatory genes described from Arabidopsis and Antirrhinum. Expression analysis suggests that the two gerbera agamous orthologues, the globosa orthologue and one of the deficiens orthologues may have functional equivalency to their counterparts, participating in the C and B functions, respectively. However, the function of a second deficiens orthologue appears unrelated to the B function, and that of a squamosa orthologue seems distinct from squamosa as well as from the A function. The induction patterns of gerbera MADS box genes conform spatiotemporally to the multi-flowered, head-like inflorescence typical of Asteraceae. Furthermore, gerbera plants transgenic for the newly isolated MADS box genes shed light onto the mechanistic basis for some floral characteristics that are typical for Asteraceae. We can conclude, therefore, that the pappus bristles are sepals highly modified for seed dispersal, and that organ abortion in the female marginal flowers is dependent upon organ identity and not organ position when position is homeotically altered.

Growth hormone binding affinity for its receptor surpasses the requirements for cellular activity.

The human growth hormone (hGH)-receptor interaction was used to study the relationship between hormone-receptor affinity and bioactivity. hGH has two nonequivalent sites, called site 1 and site 2, that bind two molecules of receptor in a sequential fashion. We produced both site 1 and site 2 high-affinity hGH variants either by combining alanine mutants previously found to improve affinity at site 1 or by random mutagenesis of residues in site 2 followed by phage display and receptor binding selections. The two high-affinity variants, as well as one which combined them, were used in cell proliferation assays with FDC-P1 cells expressing the hGH receptor. Interestingly, none of these variants produced a change in the EC50 for cell proliferation or the levels of JAK2 tyrosine kinase phosphorylation. Next we studied the effect of a reduction in site 1 affinity on cell proliferation. A systematic series of hGH mutants were produced in which affinity for site 1 was reduced from 5- to 500-fold. Surprisingly, the EC50 for cell proliferation was unaffected until affinity was reduced about 30-fold from wild-type hGH. Thus, native hGH-receptor affinity is much higher than it needs to be for maximal JAK2 phosphorylation or cell proliferation. These studies begin to define basic functional tolerances for receptor activation that need to be considered in the design of hGH mimics.

A bHLH transcription factor mediates organ, region and flower type specific signals on dihydroflavonol-4-reductase (dfr) gene expression in the inflorescence of Gerbera hybrida (Asteraceae).

The angiosperm family Asteraceae is characterized by composite inflorescences, which are highly organized structures consisting of different types of flowers. In order to approach the control of floral organ differentiation in Asteraceae at molecular level, we are studying regulation of flavonoid biosynthesis in Gerbera hybrida. Dihydroflavonol-4-reductase (dfr) expression is regulated according to anthocyanin pigmentation patterns in all tested gerbera varieties at several anatomical levels. We have isolated a promoter for one of the dfr genes, Pgdfr2. Gerbera plants transgenic for a Pgdfr2-uidA construct reveal that the activity of the Pgdfr2 promoter from one variety follows the pigmentation in other varieties which have different color patterns. It is thus evident that the observed complex regulation of dfr expression occurs in trans. In order to identify the trans-acting regulators, we isolated a cDNA (gmyc1) homologous to the previously characterized genes encoding bHLH-type regulators of the anthocyanin pathway in plants. The expression of gmyc1 in different varieties suggests that it has a major role in regulating dfr activity in corolla and carpel, but not in pappus and stamen. Specifically in gerbera, the identical patterns of gmyc1 and dfr expression in corolla tissue suggest that GMYC1 also regulates dfr expression in a region and flower type specific manner. Our studies show that in gerbera GMYC1-dfr interaction is part of several developmental processes characteristic for Asteraceae (such as specification of flower types across the composite inflorescence), whereas in other processes (such as differentiation of sepal as pappus) other regulators control dfr expression to determine the spatial specificity.

Gene discovery in the wood-forming tissues of poplar: analysis of 5, 692 expressed sequence tags.

A rapidly growing area of genome research is the generation of expressed sequence tags (ESTs) in which large numbers of randomly selected cDNA clones are partially sequenced. The collection of ESTs reflects the level and complexity of gene expression in the sampled tissue. To date, the majority of plant ESTs are from nonwoody plants such as Arabidopsis, Brassica, maize, and rice. Here, we present a large-scale production of ESTs from the wood-forming tissues of two poplars, Populus tremula L. x tremuloides Michx. and Populus trichocarpa 'Trichobel.' The 5,692 ESTs analyzed represented a total of 3,719 unique transcripts for the two cDNA libraries. Putative functions could be assigned to 2,245 of these transcripts that corresponded to 820 protein functions. Of specific interest to forest biotechnology are the 4% of ESTs involved in various processes of cell wall formation, such as lignin and cellulose synthesis, 5% similar to developmental regulators and members of known signal transduction pathways, and 2% involved in hormone biosynthesis. An additional 12% of the ESTs showed no significant similarity to any other DNA or protein sequences in existing databases. The absence of these sequences from public databases may indicate a specific role for these proteins in wood formation. The cDNA libraries and the accompanying database are valuable resources for forest research directed toward understanding the genetic control of wood formation and future endeavors to modify wood and fiber properties for industrial use.