Alloy multilayers and ternary nanostructures by direct-write approach.

The fabrication of nanopatterned multilayers, as used in optical and magnetic applications, is usually achieved by two independent steps, which consist in the preparation of multilayer films and in the successive patterning by means of lithography and etching processes. Here we show that multilayer nanostructures can be fabricated by using focused electron beam induced deposition (FEBID), which allows the direct writing of nanostructures of any desired shape with nanoscale resolution. In particular, [Formula: see text] multilayers are prepared by the alternating deposition from the metal carbonyl precursors, [Formula: see text] and [Formula: see text], and neopentasilane, [Formula: see text]. The ability to fabricate nanopatterned multilayers by FEBID is of interest for the realization of hyperbolic metamaterials and related nanodevices. In a second experiment, we treated the multilayers by low-energy electron irradiation in order to induce atomic species intermixing with the purpose to obtain ternary nanostructured compounds. Transmission electron microscopy and electrical transport measurements indicate that in thick multilayers, (n = 12), the intermixing is only partial, taking place mainly in the upper part of the structures. However, for thin multilayers, (n = 2), the intermixing is such that a transformation into the L21 phase of the Co2FeSi Heusler compound takes place over the whole sample volume.

Three dimensional tracking of exploratory behavior of barnacle cyprids using stereoscopy.

Surface exploration is a key step in the colonization of surfaces by sessile marine biofoulers. As many biofouling organisms can delay settlement until a suitable surface is encountered, colonization can comprise surface exploration and intermittent swimming. As such, the process is best followed in three dimensions. Here we present a low-cost transportable stereoscopic system consisting of two consumer camcorders. We apply this novel apparatus to behavioral analysis of barnacle larvae (≈800 µm length) during surface exploration and extract and analyze the three-dimensional patterns of movement. The resolution of the system and the accuracy of position determination are characterized. As a first practical result, three-dimensional swimming trajectories of the cypris larva of the barnacle Semibalanus balanoides are recorded in the vicinity of a glass surface and close to PEG2000-OH and C(11)NMe(3)(+)Cl(-) terminated self-assembled monolayers. Although less frequently used in biofouling experiments due to its short reproductive season, the selected model species [Marechal and Hellio (2011), Int Biodeterior Biodegrad, 65(1):92-101] has been used following a number of recent investigations on the settlement behavior on chemically different surfaces [Aldred et al. (2011), ACS Appl Mater Interfaces, 3(6):2085-2091]. Experiments were scheduled to match the availability of cyprids off the north east coast of England so that natural material could be used. In order to demonstrate the biological applicability of the system, analysis of parameters such as swimming direction, swimming velocity and swimming angle are performed.

Orbital-dependent charge transfer dynamics in conjugated self-assembled monolayers.

Femtosecond charge transfer (CT) dynamics in a series of self-assembled monolayers with an oligo(phenylenethynylene) and oligo(phenyl) backbone is addressed by resonant Auger spectroscopy using the core hole clock method. The characteristic CT times are found to depend strongly on the character of the molecular orbital (MO) which mediates the CT process. This demonstrates that the efficiency and rate of CT through molecular frameworks can be controlled by resonant injection of the charge carriers into specific MOs.

Combined STM and FTIR characterization of terphenylalkanethiol monolayers on Au(111): effect of alkyl chain length and deposition temperature.

Self-assembled monolayers (SAMs) of 4,4'-terphenyl-substituted alkanethiols C6H5(C6H4)2(CH2)n-SH (TPn, n = 1-6) on Au (111) substrates were studied using scanning tunneling microscopy (STM) and infrared reflection absorption spectroscopy (IRRAS). When the SAMs were prepared at room temperature (RT, 298 K), TPn films (except TP2) exhibit an odd-even effect regarding both molecular orientation and packing density. For all investigated films, STM data reveals the presence of a large degree of lateral order. In the case of odd-numbered TPns, the films revealed a (2 square root(3) x square root(3))R30 degree molecular arrangement. For the even-numbered TP4 and TP6 SAMs, a c(5 square root(3) x 3) rectangular unit cell was found. The packing density for the even-numbered TPn SAMs is 25% lower than that for the odd-numbered TPn SAMs. When the SAMs were prepared at 333 K, the even-numbered SAMs were found to form structures with a significantly lower packing density. In the case of TP2, instead of the (2 square root(3) x square root(3))R30 degree structure formed at room temperature, a c(5 square root(3) x 3) structure was observed. For TP6 SAMs, the room-temperature c(5 square root(3) x 3) structure was replaced by a (6 square root(3) x 2 square root(3))R30 degree structure.

Odd-even effects in photoemission from terphenyl-substituted alkanethiolate self-assembled monolayers.

Self-assembled monolayers (SAMs) formed from 4,4'-terphenyl-substituted alkanethiols C6H5(C6H4)2-(CH2)nSH (TPn, n = 1-6) on polycrystalline (111) gold and silver substrates have been characterized by synchrotron-based high-resolution X-ray photoelectron spectroscopy. The intensities, binding energy positions, and width of most photoemission lines exhibited pronounced odd-even effects, i.e., systematic and periodic variation, depending on either odd or even number of the methylene units in the aliphatic linker of the TPn molecules. The detailed analysis of these effects provides important information on the bonding and arrangement of the chemisorbed sulfur headgroups in the TPn films and balance of the structural forces in alkanethiolate SAMs.

Self-assembled monolayers of alkaneselenolates on (111) gold and silver.

Self-assembled monolayers (SAMs) formed from didodecyl diselenide (C12SeSeC12) and didodecyl selenide (C12SeC12) on (111) Au and Ag substrates were extensively characterized by several complementary techniques. C12SeSeC12 was found to form contamination-free, densely packed, and well-ordered C12Se SAMs on both substrates, whereas the adsorption of C12SeC12 occurred only on Au and resulted in the formation of a SAM-like C12SeC12 film with a low packing density and a conformational disorder. The properties of the C12Se SAMs were compared with those of dodecanethiolate (C12S) SAMs. The packing density, orientational order, and molecular inclination in C12Se/Au and C12S/Au were found to be very similar. In contrast, C12Se/Ag exhibited significantly lower packing density, a lower degree of the conformational and orientational order, and a larger molecular inclination than C12S/Ag. The results suggest a sp3 bonding configuration for the selenium atom on Au and Ag and indicate a larger corrugation of the headgroup-substrate binding energy surface in C12Se/Ag than in C12S/Ag.

Self-assembled monolayers of aromatic selenolates on noble metal substrates.

Self-assembled monolayers (SAMs) formed from bis(biphenyl-4-yl) diselenide (BBPDSe) on Au(111) and Ag(111) substrates have been characterized by high-resolution X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, infrared reflection absorption spectroscopy, water contact angle measurements, and scanning tunneling microscopy (STM). BBPDSe was found to form contamination-free, densely packed, and well-ordered biphenyl selenolate (BPSe) SAMs on both Au and Ag. Spectroscopic data suggest very similar packing density, orientational order, and molecular inclination in BPSe/Au and BPSe/Ag. STM data give a similar intermolecular spacing of 5.3 +/- 0.4 A on both Au and Ag but exhibit differences in the exact arrangement of the BPSe molecules on these two substrates, with the (2 square root[3] x square root[3])R30 degrees and (square root[3] x square root[3])R30 degrees unit cells on Au and Ag, respectively. There is strong evidence for adsorbate-mediated substrate restructuring in the case of Au, whereas no clear statement on this issue can be made in the case of Ag. The film quality of the BPSe SAMs is superior to their thiol analogues, which is presumably related to a better ability of the selenolates to adjust the surface lattice of the substrate to the most favorable 2D arrangement of the adsorbate molecules. This suggests that aromatic selenolates represent an attractive alternative to the respective thiols.

Electron transport through thin organic films in metal--insulator--metal junctions based on self-assembled monolayers.

This paper describes an experimentally simple system for measuring rates of electron transport across organic thin films having a range of molecular structures. The system uses a metal--insulator--metal junction based on self-assembled monolayers (SAMs); it is particularly easy to assemble. The junction consists of a SAM supported on a silver film (Ag-SAM(1)) in contact with a second SAM supported on the surface of a drop of mercury (Hg-SAM(2))--that is, a Ag-SAM(1)SAM(2)-Hg junction. SAM(1) and SAM(2) can be derived from the same or different thiols. The current that flowed across junctions with SAMs of aliphatic thiols or aromatic thiols on Ag and a SAM of hexadecane thiol on Hg depended both on the molecular structure and on the thickness of the SAM on Ag: the current density at a bias of 0.5 V ranged from 2 x 10(-10) A/cm(2) for HS(CH(2))(15)CH(3) on Ag to 1 x 10(-6) A/cm(2) for HS(CH(2))(7)CH(3) on Ag, and from 3 x 10(-6) A/cm(2) for HS(Ph)(3)H (Ph = 1,4-C(6)H(4)) on Ag to 7 x 10(-4) A/cm(2) for HSPhH on Ag. The current density increased roughly linearly with the area of contact between SAM(1) and SAM(2), and it was not different between Ag films that were 100 or 200 nm thick. The current--voltage curves were symmetrical around V = 0. The current density decreased with increasing distance between the electrodes according to the relation I = I(0)e(-beta d(Ag,Hg)), where d(Ag,Hg) is the distance between the electrodes, and beta is the structure-dependent attenuation factor for the molecules making up SAM(1). At an applied potential of 0.5 V, beta was 0.87 +/- 0.1 A(-1) for alkanethiols, 0.61 +/- 0.1 A(-1) for oligophenylene thiols, and 0.67 +/- 0.1 A(-1) for benzylic derivatives of oligophenylene thiols. The values of beta did not depend significantly on applied potential over the range of 0.1 to 1 V. These junctions provide a test bed with which to screen the intrinsic electrical properties of SAMs made up of molecules with different structures; information obtained using these junctions will be useful in correlating molecular structure and rates of electron transport.

Protecting Groups for Thiols Suitable for Suzuki Conditions.

The thiol group is one of the few groups NOT tolerated by the Suzuki reaction. Therefore, a new protective group, the 2-methoxyisobutyryl group, was developed by tuning the electronic/steric properties of the acyl residue. Other thioesters, such as thioacetate, result in a more or less dominant side reaction, which to date has not been described: sulfur-assisted acylation of boronic acids. The reaction pathway for this new reaction is discussed.

Stamping of monomeric SAMs as a route to structured crystallization templates: patterned titania films.

Gold-coated glass slides have be patterned by using self-assembled monolayers (SAM) of alkane thiols. Through the use of a special thiol terminated with a styrene monomer, microstructures of 5 to 10 microm width and 70 A height have been formed on the surface by graft polymerization of styrene. These patterned gold slides have then been used to template the precipitation of thin titania films from ethanolic solutions of titanium isopropoxide to create microstructured architectures in the film. Plasmon resonance spectra have established the presence of different steps in the process and have been used to follow the kinetics of the precipitation of titania on the surface. The structured TiO2 films have been characterized by scanning electron microscopy.

Self-Assembly of Mesoscale Objects into Ordered Two-Dimensional Arrays

Regular arrays of topologically complex, millimeter-scale objects were prepared by self-assembly, with the shapes of the assembling objects and the wettability of their surfaces determining the structure of the arrays. The system was composed of solid objects floating at the interface between perfluorodecalin and water and interacting by lateral capillary forces; patterning of the wettability of the surfaces of the objects directs these forces. Self-assembly results from minimization of the interfacial free energy of the liquid-liquid interface. Calculations suggest that this strategy for self-assembly can be applied to objects on a micrometer scale.