RESUMO
Electrochemical nitrogen reduction reaction (e-NRR) is an eco-friendly alternative approach to generate ammonia under ambient conditions, with very low power supply. But, developing of an efficient catalyst by suppressing parallel hydrogen evolution reaction as well as avoiding the catalysts poisoning either by hydrogen or electrolyte ion is an open question. So, in order to screen the single atom catalysts (SACs) for the e-NRR, we proposed a descriptor-based approach using density functional theory (DFT) based calculations. We investigated total 24 different SACs of types TM-Pc, TM-N3C1, TM-N2C2, TM-NC3 and TM-N4, considering transition metal (TM). We have considered mainly BF3 ion to understand the role of electrolyte and extended the study for four more electrolyte ions, Cl, ClO4, SO4, OH. Herein, to predict catalytic activity for a given catalyst we have tested 16 different electronic parameters. Out of those, electronic parameter dxz↓ occupancy, identified as electronic descriptor, is showing an excellent linear correlation with catalytic activity (R2 = 0.86). Furthermore, the selectivity of e-NRR over HER is defined by using an energy parameter ∆G*H-∆G*NNH. Further, the electronic descriptor (dxz↓ occupancy) can be used to predict promising catalysts for e-NRR, thus reducing the efforts on designing future single atom catalysts (SACs).
RESUMO
The increasing demand for clean hydrogen production over fossil fuels necessitates the development of sustainable piezoelectrochemical methods that can overcome the limitations of conventional electrocatalytic and photocatalytic approaches. In this regard, existing piezocatalysts face challenges related to their low piezoelectricity or active site coverage for hydrogen evolution reaction (HER). Driven by global environmental concerns, there is a compelling push to engineer practical materials for highly efficient HER. Herein, monoelemental 2D tellurium (Te) is presented as a class of layered chalcogenide with a non-centrosymmetric crystal structure (P3121 space group). The refined Te nanosheets demonstrate an unprecedented highly efficient H2 production rate ≈9000 µmol g-1 h-1 under ultrasonic mechanical vibration due to built-in piezo-potential in the system. The remarkable piezocatalytic performance of Te nanosheets arises from a synergistic interplay between their semi-metallic nature, favorable free energy landscape, enhanced electrical conductivity and outstanding piezoelectricity. As a proof of concept, the theoretical approach based on Density Functional Theory (DFT) validates the findings due to the gradual exposure of active sites on the Te nanosheets leading to a self-optimized catalytic performance for hydrogen generation. Therefore, mechanically driven Te emerges as a promising piezocatalyst with the potential to revolutionize highly efficient and sustainable technology for futuristic applications.
RESUMO
Bifunctional electrode materials are highly desirable for meeting increasing global energy demands and mitigating environmental impact. However, improving the atom-efficiency, scalability, and cost-effectiveness of storage systems, as well as optimizing conversion processes to enhance overall energy utilization and sustainability, remains a significant challenge for their application. Herein, we devised an optimized, facile, economic, and scalable synthesis of large area (cm2), ultrathin (â¼2.9 ± 0.3 nm) electroactive nanosheet of ß-Ni(OH)2, which acted as bifunctional electrode material for charge storage and oxygen evolution reaction (OER). The ß-Ni(OH)2 nanosheet electrode shows the volumetric capacity of 2.82 Ah.cm-3(0.82 µAh.cm-2) at the current density of 0.2 mA.cm-2. The device shows a high capacity of 820 mAh.cm-3 with an ultrahigh volumetric energy density of 0.33 Wh.cm-3 at 275.86 W.cm-3 along with promising stability (30,000 cycles). Furthermore, the OER activity of ultrathin ß-Ni(OH)2 exhibits an overpotential (η10) of 308 mV and a Tafel value of 42 mV dec-1 suggesting fast reaction kinetics. The mechanistic studies are enlightened through density functional theory (DFT), which reveals that additional electronic states near the Fermi level enhance activity for both capacitance and OER.
RESUMO
Water electrolysis to produce hydrogen (H2) using renewable energy is one of the most promising candidates for realizing carbon neutrality, but its reaction kinetics is hindered by sluggish anodic oxygen evolution reaction (OER). Ruthenium (Ru) in its high-valence state (oxide) provides one of the most active OER sites and is less costly, but thermodynamically unstable. The strong interaction between Ru nanoparticles (NPs) and nickel hydroxide (Ni(OH)2) is leveraged to directly form Ru-Ni(OH)2 on the surface of a porous nickel foam (NF) electrode via spontaneous galvanic replacement reaction. The formation of RuâOâNi bonds at the interface of the Ru NPs and Ni(OH)2 (Ru-Ni(OH)2) on the surface oxidized NF significantly enhance stability of the Ru-Ni(OH)2/NF electrode. In addition to OER, the catalyst is active enough for the hydrogen evolution reaction (HER). As a result, it is able to deliver overpotentials of 228 and 15 mV to reach 10 mA cm-2 for OER and HER, respectively. An industry-scale evaluation using Ru-Ni(OH)2/NF as both OER and HER electrodes demonstrates a high current density of 1500 mA cm-2 (OER: 410 mV; HER: 240 mV), surpassing commercial RuO2 (OER: 600 mV) and Pt/C based performance (HER: 265 mV).
RESUMO
Doping is considered a promising material engineering strategy in electrochemical nitrogen reduction reaction (NRR), provided the role of the active site is rightly identified. This work concerns the doping of group VIB metal in Ag3PO4 to enhance the active site density, accompanied by d-p orbital mixing at the active site/N2 interface. Doping induces compressive strain in the Ag3PO4 lattice and inherently accompanies vacancy generation, the latter is quantified with positron annihilation lifetime studies (PALS). This eventually alters the metal d-electronic states relative to Fermi level and manipulate the active sites for NRR resulting into side-on N2 adsorption at the interface. The charge density deployment reveals Mo as the most efficient dopant, attaining a minimum NRR overpotential, as confirmed by the detailed kinetic study with the rotating ring disk electrode (RRDE) technique. In fact, the Pt ring of RRDE fails to detect N2H4, which is formed as a stable intermediate on the electrode surface, as identified from in-situ attenuated total reflectance-infrared (ATR-IR) spectroscopy. This advocates the complete conversion of N2 to NH3 on Mo/Ag3PO4-10 and the so-formed oxygen vacancies formed during doping act as proton scavengers suppressing hydrogen evolution reaction resulting into a Faradaic efficiency of 54.8% for NRR.
RESUMO
Water-processable hybrid piezo- and thermo-electric materials have an increasing range of applications. We use the nanoconfinement effect of ferroelectric discrete molecular complex [Cu(l-phe)(bpy)(H2O)]PF6·H2O (1) in a nonpolar polymer 1D-nanofiber to envision the high-performance flexible hybrid piezo- and thermo-electric nanogenerator (TEG). The 1D-nanoconfined crystallization of 1 enhances piezoelectric throughput with a high degree of mechano-sensitivity, i.e., 710 mV/N up to 3 N of applied force with 10,000 cycles of unaffected mechanical endurance. Thermoelectric properties analysis shows a noticeable improvement in Seebeck coefficient (â¼4 fold) and power factor (â¼6 fold) as compared to its film counterpart, which is attributed to the enhanced density of states near the Fermi edges as evidenced by ultraviolet photoelectric spectroscopy and density functional based theoretical calculations. We report an aqueous processable hybrid TEG that provides an impressive magnitude of Seebeck coefficient (â¼793 µV/K) and power factor (â¼35 mWm-1K-2) in comparison to a similar class of materials.
RESUMO
Oxygen vacancy engineering has recently been gaining much interest as the charging effect it induces in a material can be used for varied applications. Usually, semiconductor materials act poorly in electrocatalysis, particularly in the nitrogen reduction reaction (NRR), owing to their inherent charge deficit and huge band gap. Vacancy introduction can be a viable material engineering route to make use of these materials for the NRR. However, a detailed investigation of the vacancy-type and its role for the structural reorientation and charge redistribution of a material is lagging in the field of NRRs. This work thus focuses on the synthesis of oxygen vacancy-engineered SnO2 with a gradual structural transformation from in-plane (iov) to bridge-type oxygen vacancy (bov) density. Consequently, the electron occupancy of the sp3d hybrid orbital changes, leading to an upshifted valence band maxima towards the Fermi level. This has a profound effect on the nature of N2 adsorption and the extent of NîN bond polarization. Sn atoms adjacent to the bov are found to have a fair density of dangling charges that accomplish the NRR process at a comparatively low overpotential and determine the binding strength of the intermediates on the active site. The obscured yet stable reaction intermediates are thereby identified with in situ ATR-IR studies. A restricted hydrogen evolution reaction Faradaic on the Sn-site (favored over O-atoms) results in a Faradaic efficiency of 48.5%, which is better than that reported in all the literature reports on SnO2 for the NRR. This study thus unveils sufficient insights into the role of oxygen vacancies in a crystal as well as electronic structural alteration of SnO2 and the effect of active sites on the rate kinetics of the NRR.
RESUMO
C2 products are more desirable than C1 products during CO2 electroreduction (CO2ER) because the former possess higher energy density and greater industrial value. For CO2ER, Cu is a well-known catalyst, but the selectivity toward C2 products is still a big challenge for researchers due to complex intermediates, different final products, and large space of the catalyst due to its morphology, plane, size, host surface etc. Using density functional theory (DFT) calculations, we find that alloying of Cu nanoparticles can help to enhance the selectivity toward C2 products during CO2ER with a low overpotential. By a systematic investigation of 111 planes (which prefer the C1 product in the case of bulk Cu), the alloys show the generation of C2 products via *CO-*CO dimerization (* indicates adsorbed state). It also suppresses the counter-pathway of hydrogenation of *CO to *CHO, which leads to C1 products. Further, we find that *CH2CHO is the bifurcating intermediate to distinguish between ethanol and ethylene as the final product. We have used simple graphical construction to identify the catalyst for CO2ER over HER, and vice versa. We have also defined the case of hydrogen poisoning and projected a parity plot to recognize the catalyst for C2 product evolution over the C1 product. Our study reveals that Cu-Ag and Cu-Zn catalysts selectively promote ethanol production on 111 planes. Moreover, an edge-doped 2SO2 graphene nanoribbon as the host layer further lowers the barrier and selectively promotes ethanol on Cu38- and Cu79-based alloys. This work provides new theoretical insights into designing Cu-based nanoalloy catalysts for C2 product formation on the 111 plane.
RESUMO
Being a macrolide antibiotic, the antiviral and anti-inflammatory properties of azithromycin (AZM) were taken advantage of during the COVID-19 pandemic which led to the overuse of AZM resulting in excessive release and accumulation in the waterways and ecosystem causing unpleasant threats to humankind. This demands the necessity for a highly sensitive material being capable of recognizing AZM in wastewater. Mindful of the optical attributes of organic ligand structures, we have constructed a hybrid material by chelating Zn2+ with pyridyl benzimidazole (PBI). The prepared sensor material ZnPBI was characterized using various microscopic and spectroscopic techniques including XRD, FT-IR, HR-SEM, HR-TEM, etc. The proposed sensor material exhibited proficient detection performance selectively towards AZM with a very low detection limit of 72 nM. Two linear ranges between 0 - 70 µM and 70-100 µM were observed corresponding to two different mechanistic pathways. To the best of our knowledge, the utilization of a metal-organic complex (MOC) for the fluorometric detection of AZM has not been explored so far. It is creditworthy to cite that the long-term structural stability of the sensor material was maintained for 100 days in water and it can be reused three times without any depreciation in the sensing activity. A combination of energy transfer routes, adsorption and electrostatic interactions for AZM detection are described experimentally and theoretically which provides insights into the role of MOC as sensing probes.
Assuntos
Azitromicina , Ecossistema , Humanos , Pandemias , Espectroscopia de Infravermelho com Transformada de Fourier , Antibacterianos/uso terapêuticoRESUMO
Defect engineering through modification of their surface linkage is found to be an effective pathway to escalate the solar energy conversion efficiency of metal-organic frameworks (MOFs). Herein, defect engineering using controlled decarboxylation on the NH2-UiO-66 surface and integration of ultrathin NiCo-LDH nanosheets synergizes the hydrogen evolution reaction (HER) under a broad visible light regime. Diversified analytical methods including positron annihilation lifetime spectroscopy were employed to investigate the role of Zr3+-rich defects by analyzing the annihilation characteristics of positrons in NH2-UiO-66, which provides a deep insight into the effects of structural defects on the electronic properties. The progressively tuned photophysical properties of the NiCo-LDH@NH2-UiO-66-D-heterostructured nanocatalyst led to an impressive rate of HER (â¼2458 µmol h-1 g-1), with an apparent quantum yield of â¼6.02%. The ultrathin NiCo-LDH nanosheet structure was found to be highly favored toward electrostatic self-assembly in the heterostructure for efficient charge separation. Coordination of Zr3+ on the surface of the NiCo-LDH nanosheet support through NH2-UiO-66 was confirmed by X-ray absorption spectroscopy and electron paramagnetic resonance spectroscopy techniques. Femtosecond transient absorption spectroscopy studies unveiled a photoexcited charge migration process from MOF to NiCo-LDH which favorably occurred on a picosecond time scale to boost the catalytic activity of the composite system. Furthermore, the experimental finding and HER activity are validated by density functional theory studies and evaluation of the free energy pathway which reveals the strong hydrogen binding over the surface and infers the anchoring effect of the ultrathin layered double hydroxide (LDH) in the vicinity of the Zr cluster with a strong host-guest interaction. This work provided a novel insight into efficient photocatalysis via defect engineering at the linker modulation in MOFs.
RESUMO
This work showcases a novel strategy for the synthesis of shape-dependent alloy nanostructures with the incorporation of solid substrates, leading to remarkable enhancements in the electrocatalytic performance. Herein, an aqueous medium approach has been used to synthesize an octahedral PdXCuY alloy of different Pd:Cu ratios to better comprehend their electrocatalytic potential. With the aim to outperform high activity and efficient stability, zirconium oxide (ZrO2), graphene oxide nanosheets (GONs), and hexagonal boron nitride nanosheets (hBNNs) solid substrates are occupied to decorate the optimized Pd3Cu7 catalyst with a minimum 5 wt % metal loading. When compared to the counterparts and different ratios, the Pd3Cu7@hBNNs catalyst exhibited an optimal activity for hydrogen evolution reaction (HER). The lower overpotential and Tafel values observed are 64 and 51 mV/dec for Pd3Cu7@hBNNs followed by Pd3Cu7@ZrO2, which showed a 171 mV overpotential and a 98 mV/dec Tafel value, respectively. Meanwhile, the Pd3Cu7@GONs were found to have a 202 mV overpotential and a 110 mV/dec Tafel value. The density functional theory, which achieves a lower free energy (ΔGH*) value for Pd3Cu7@hBNNs than the other catalysts for HER, further supports its excellent performance in achieving the Volmer-Heyrovsky mechanism path. Moreover, the superior HER activity and sturdier resilience after 8 h of stability may be due to the synergy between the metal atoms, monodisperse decoration, and the coordination effect of the support material.
RESUMO
Ammonia is a crucial biochemical raw material for nitrogen containing fertilizers and a hydrogen energy carrier obtained from renewable energy sources. Electrocatalytic ammonia synthesis is a renewable and less-energy intensive way as compared to the conventional Haber-Bosch process. The electrochemical nitrogen reduction reaction (eNRR) is sluggish, primarily due to the deceleration by slow N2 diffusion, giving rise to competitive hydrogen evolution reaction (HER). Herein, we have engineered a catalyst to have hydrophobic and aerophilic nature via fluorinated copper phthalocyanine (F-CuPc) grafted with graphene to form a hybrid electrocatalyst, F-CuPc-G. The chemically functionalized fluorine moieties are present in the second coordination sphere, where it forms a three-phase interface. The hydrophobic layer of the catalyst fosters the diffusion of N2 molecules and the aerophilic characteristic helps N2 adsorption, which can effectively suppress the HER. The active metal center is present in the primary sphere available for the NRR with a viable amount of H+ to achieve a substantially high faradaic efficiency (FE) of 49.3% at -0.3 V vs. RHE. DFT calculations were performed to find out the rate determining step and to explore the full energy pathway. A DFT study indicates that the NRR process follows an alternating pathway, which was further supported by an in situ FTIR study by isolating the intermediates. This work provides insights into designing a catalyst with hydrophobic moieties in the second coordination sphere together with the aerophilic nature of the catalyst that helps to improve the overall FE of the NRR by eliminating the HER.
RESUMO
The main challenges impeding the widespread use of organic-inorganic lead halide perovskites in modern-day technological devices are their long-term instability and lead contamination. Among other environmentally convivial and sustainable alternatives, Cs2SnX6 (X = Cl, Br, and I) compounds have shown promise as ambient-stable, lead-free materials for energy harvesting, and optoelectronic applications. Additionally, they have demonstrated tremendous potential for the fabrication of self-powered nanogenerators in conjunction with piezoelectric polymers like polyvinylidene-fluoride (PVDF). We report on the fabrication of composites constituting solvothermally synthesized Cs2SnX6 nanostructures and PVDF. The electroactive phases in PVDF were boosted by the incorporation of Cs2SnX6, leading to enhanced piezoelectricity in the composites. First-principles density functional theory (DFT) studies were carried out to understand the interfacial interaction between the Cs2SnX6 and PVDF, which unravels the mechanism of physisorption between the perovskite and PVDF, leading to enhanced piezoresponse. The halide ions in the inorganic Cs2SnX6 perovskites were varied systematically, and the piezoelectric behaviors of the respective piezoelectric nanogenerators (PENGs) were investigated. Further, the dielectric properties of these halide perovskite-based hybrids are quantified, and their piezoresponse amplitude, piezoelectric output signals, and charging capacity are also evaluated. Out of the several films fabricated, the optimized Cs2SnI6_PVDF film shows a piezoelectric coefficient (d33) value of â¼200 pm V-1 and a remanent polarization of â¼0.74 µC cm-2 estimated from piezoresponse force microscopy and polarization hysteresis loop measurement, respectively. The optimized Cs2SnI6_PVDF-based device produced an instantaneous output voltage of â¼167 V, a current of â¼5.0 µA, and a power of â¼835 µW across a 5 MΩ resistor when subjected to periodic vertical compression. The output voltage of this device is used to charge a capacitor with a 10 µF capacitance up to 2.2 V, which is then used to power some commercial LEDs. In addition to being used as a pressure sensor, the device is employed to monitor human physiological activities. The device demonstrates excellent operational durability over a span of several months in an ambient environment vouching for its exceptional potential in application to mechanical energy harvesting and pressure sensing applications.
RESUMO
Ammonia is produced through the energy-intensive Haber-Bosch process, which undergoes catalytic oxidation for the production of commercial nitric acid by the senescent Ostwald process. The two energy-intensive industrial processes demand for process sustainability. Hence, single-step electrocatalysis offers a promising approach toward a more environmentally friendly solution. Herein, we report a 10-electron pathway associated one-step electrochemical dinitrogen oxidation reaction (N2OR) to nitric acid by manganese phthalocyanine (MnPc) hollow nano-structures under ambient conditions. The catalyst delivers a nitric acid yield of 513.2 µmol h-1 gcat-1 with 33.9% Faradaic efficiency @ 2.1 V versus reversible hydrogen electrode. The excellent N2OR performances are achieved due to the specific-selectivity, presence of greater number of exposed active sites, recyclability, and long period stability. The extended X-ray absorption fine structure confirms that Mn atoms are coordinated to the pyrrolic and pyridinic nitrogen via Mn-N4 coordination. Density functional theory-based theoretical calculations confirm that the Mn-N4 site of MnPc is the main active center for N2OR, which suppresses the oxygen evolution reaction. This work provides a new arena about the successful example of one step nitric acid production utilizing a Mn-N4 active site-based metal phthalocyanine electrocatalyst by dinitrogen oxidation for the development of a carbon-neutral sustainable society.
RESUMO
The construction of photoactive units in the proximity of a stable framework support is one of the promising strategies for uplifting photocatalysis. In this work, the ultrasmall Pd NPs implanted onto core-shell (CS) metal organic frameworks (MOFs), i.e., CS@Pd nanoarchitectures with tailored electronic and structural properties are reported. The all-in-one heterogeneous catalyst CS@Pd3 improves the surface functionalities and exhibits an outstanding hydrogen evolution reaction (HER) activity rate of 12.7 mmol g-1 h-1, which is 10-folds higher than the pristine frameworks with an apparent quantum efficiency (AQE) of 9.02%. The bifunctional CS@Pd shows intriguing results when subjected to photocatalytic CO2 reduction with an impressive rate of 71 µmol g-1 h-1 of MeOH under visible-light irradiation at ambient conditions. Spectroscopic data reveal efficient charge migrations and an extended lifetime of 2.4 ns, favoring efficient photocatalysis. The microscopic study affirms the formation of well-ordered CS morphology with precise decoration of Pd NPs over the CS networks. The significance of active Pd and Co sites is addressed by congruent charge-transfer kinetics and computational density functional theory calculations of CS@Pd, which validate the experimental findings with their synergistic involvement in improved photocatalytic activity. This present work provides a facile and competent avenue for the systematic construction of MOF-based CS heterostructures with active Pd NPs.
RESUMO
The excess anthropogenic CO2 depletion via the catalytic approach to produce valuable chemicals is an industrially challenging, demanding, and encouraging strategy for CO2 fixation. Herein, we demonstrate a selective one-pot strategy for CO2 fixation into "oxazolidinone" by employing stable porous trimetallic oxide foam (PTOF) as a new catalyst. The PTOF catalyst was synthesized by a solution combustion method using transition metals Cu, Co, and Ni and systematically characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), N2 sorption, temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS) analysis. Due to the distinctive synthesis method and unique combination of metal oxides and their percentage, the PTOF catalyst displayed highly interconnected porous channels along with uniformly distributed active sites on its surface. Well ahead, the PTOF catalyst was screened for the fixation of CO2 into oxazolidinone. The screened and optimized reaction parameters revealed that the PTOF catalyst showed highly efficient and selective activity with 100% conversion of aniline along with 96% selectivity and yield toward the oxazolidinone product at mild and solvent-free reaction conditions. The superiority of the catalytic performance could be due to the presence of surface active sites and acid-base cooperative synergistic properties of the mixed metal oxides. A doubly synergistic plausible reaction mechanism was proposed for the oxazolidinone synthesis experimentally with the support of DFT calculations along with bond lengths, bond angles, and binding energies. In addition, stepwise intermediate formations with the free energy profile were also proposed. Also, the PTOF catalyst displayed good tolerance toward substituted aromatic amines and terminal epoxides for the fixation of CO2 into oxazolidinones. Very interestingly, the PTOF catalyst could be significantly reused for up to 15 consecutive cycles with stable activity and retention in physicochemical properties.
RESUMO
Ammonia has been recognized as the future renewable energy fuel because of its wide-ranging applications in H2 storage and transportation sector. In order to avoid the environmentally hazardous Haber-Bosch process, recently, the third-generation ambient ammonia synthesis has drawn phenomenal attention and thus tremendous efforts are devoted to developing efficient electrocatalysts that would circumvent the bottlenecks of the electrochemical nitrogen reduction reaction (NRR) like competitive hydrogen evolution reaction, poor selectivity of N2 on catalyst surface. Herein, we report the synthesis of an oxygen-functionalized boron carbonitride matrix via a two-step pyrolysis technique. The conductive BNCO(1000) architecture, the compatibility of B-2pz orbital with the N-2pz orbital and the charging effect over B due to the C and O edge-atoms in a pentagon altogether facilitate N2 adsorption on the B edge-active sites. The optimum electrolyte acidity with 0.1 M HCl and the lowered anion crowding effect aid the protonation steps of NRR via an associative alternating pathway, which gives a sufficiently high yield of ammonia (211.5 µg h-1 mgcat-1) on the optimized BNCO(1000) catalyst with a Faradaic efficiency of 34.7% at - 0.1 V vs RHE. This work thus offers a cost-effective electrode material and provides a contemporary idea about reinforcing the charging effect over the secured active sites for NRR by selectively choosing the electrolyte anions and functionalizing the active edges of the BNCO(1000) catalyst.
RESUMO
Visible light-mediated photoredox catalysis has emerged to be a fascinating approach for the activation of CO2 and its subsequent fixation into valuable chemicals utilizing renewable and inexhaustible solar energy. Although great progress has been made in CO2 photoreduction, visible light-assisted organic synthesis using CO2 as a reactive substrate is rarely explored. Herein, we report an efficient, facile, and economically viable photoredox-mediated approach for the synthesis of important ß-thioacids via carboxylation of olefins with CO2 and thiols over a porous functionalized metal-organic framework (MOF), Fe-MIL-101-NH2, as a photocatalyst under ambient conditions. This multicomponent reaction offers wide substrate scope, mild reaction conditions, easy work-up, cost-effective and reusable photocatalysts, and higher product selectivity. Computational studies suggested that CO2 interacts with the thiophenol-styrene adduct to facilitate the synthesis of ß-thioacids in almost quantitative yields.
RESUMO
The electrochemical nitrogen reduction reaction (eNRR) offers the possibility of ammonia synthesis under mild conditions; however, it suffers from low yields, a competing hydrogen evolution reaction pathway, and hydrogen poisoning. We present a systematic approach toward screening single atom catalysts (SACs) for the eNRR, by focusing on key parameters computed from density functional theory and relationships between them. We illustrate this by application to 66 model catalysts of the types, TM-Pc, TM-N X C Y , and TM-N3, where TM is a 3d transition metal or molybdenum. We identified the best SACs as Sc-Pc, Cr-N4, Mn-Pc, and Fe-N2C2; these show eNRR selectivity over the HER and no hydrogen poisoning. The catalysts are identified through multi-parameter optimization which includes the condition of hydrogen poisoning. We propose a new electronic descriptor Oval, the valence electron occupancy of the metal center that exhibits a volcano-type relationship with eNRR overpotential. Our multi-parameter optimization approach can be mapped onto a simple graphical construction to find the best catalyst for the eNRR over the HER and hydrogen poisoning.
RESUMO
As a promising candidate for low-cost and eco-friendly thin-film photovoltaics, the emerging quaternary chalcogenide based solar cells have experienced rapid advances over the past decade. Here, we propose quaternary semiconducting chalcogenides CuZn2AlSe4 (CZASe) through cross-substitutions (cation mutations). The nonexistence of imaginary modes in the entire Brillouin zone of CZASe represents the inherent dynamic stability of the system. The electronic, optical, and defect properties of stannite CZASe quaternary semiconducting material was systematically investigated using density functional theory calculations. We have found that the chemical-potential control is very important for growing good-quality crystals and also to avoid secondary-phase formations such as ZnSe, Al2ZnSe4, and Cu3Se2. The observed p-type conductivity is mainly due to antisite defect CuZn, which has the lowest formation energy with a relatively deeper acceptor level than that of the Cu vacant site (VCu). The electronic band structures of vacancies and antisite defects by means of hybrid functional calculations show energy band shifting and energy band narrowing or broadening, which eventually tunes the optical band gap and improves the solar energy-conversion performance of semiconducting CZASe. Our results suggest that the stannite CZASe quaternary chalcogenides could be promising candidates for the efficient earth-abundant thin-film solar cells.