Feasibility Study on the Generation of Nanoporous Metal Structures by Means of Selective Alloy Depletion in Halogen-Rich Atmospheres.

A new approach to produce nanoporous metals has been investigated, which is based on the dealloying of bi- or multi-component alloys. Depletion and pore formation of the alloy substrate are obtained by the transport of certain alloy components at high temperatures via volatile halogen compounds. These halogen compounds are transferred to materials acting as sinks based on their higher affinity to the respective components, and chemically bound there. Transfer via volatile halogen compounds is known from the pack cementation coating process and from high-temperature corrosion in certain industrial atmospheres. The approach was tested on different precursor alloys: Ti-43.5Al-4Nb-1Mo-0.1B (TNM-B1), TiNb42, and AlCu. Both dealloying effects and micro-scale pore formation were observed. The detailed size of the porous structures is in the range of 50 nm for both TNM-B1 and TiNB42 and 500 nm for AlCu.

99mTc-HDP Labeling-A Non-Destructive Method for Real-Time Surveillance of the Osteogenic Differentiation Potential of hMSC during Ongoing Cell Cultures.

99-Metastabil Technetium (99mTc) is a radiopharmaceutical widely used in skeletal scintigraphy. Recent publications show it can also be used to determine the osteogenic potential of human mesenchymal stem cells (hMSCs) by binding to hydroxyapatite formed during bone tissue engineering. This field lacks non-destructive methods to track live osteogenic differentiation of hMSCs. However, no data about the uptake kinetics of 99mTc and its effect on osteogenesis of hMSCs have been published yet. We therefore evaluated the saturation time of 99mTc by incubating hMSC cultures for different periods, and the saturation concentration by using different amounts of 99mTc activity for incubation. The influence of 99mTc on osteogenic potential of hMSCs was then evaluated by labeling a continuous hMSC culture three times over the course of 3 weeks, and comparing the findings to cultures labeled once. Our findings show that 99mTc saturation time is less than 0.25 h, and saturation concentration is between 750 and 1000 MBq. Repeated exposure to γ-radiation emitted by 99mTc had no negative effects on hMSC cultures. These new insights can be used to make this highly promising method broadly available to support researchers in the field of bone tissue engineering using this method to track and evaluate, in real-time, the osteogenic differentiation of hMSC, without any negative influence on the cell viability, or their osteogenic differentiation potential.

Application of Poly-L-Lysine for Tailoring Graphene Oxide Mediated Contact Formation between Lithium Titanium Oxide LTO Surfaces for Batteries.

When producing stable electrodes, polymeric binders are highly functional materials that are effective in dispersing lithium-based oxides such as Li4Ti5O12 (LTO) and carbon-based materials and establishing the conductivity of the multiphase composites. Nowadays, binders such as polyvinylidene fluoride (PVDF) are used, requiring dedicated recycling strategies due to their low biodegradability and use of toxic solvents to dissolve it. Better structuring of the carbon layers and a low amount of binder could reduce the number of inactive materials in the electrode. In this study, we use computational and experimental methods to explore the use of the poly amino acid poly-L-lysine (PLL) as a novel biodegradable binder that is placed directly between nanostructured LTO and reduced graphene oxide. Density functional theory (DFT) calculations allowed us to determine that the (111) surface is the most stable LTO surface exposed to lysine. We performed Kubo-Greenwood electrical conductivity (KGEC) calculations to determine the electrical conductivity values for the hybrid LTO-lysine-rGO system. We found that the presence of the lysine-based binder at the interface increased the conductivity of the interface by four-fold relative to LTO-rGO in a lysine monolayer configuration, while two-stack lysine molecules resulted in 0.3-fold (in the plane orientation) and 0.26-fold (out of plane orientation) increases. These outcomes suggest that monolayers of lysine would specifically favor the conductivity. Experimentally, the assembly of graphene oxide on poly-L-lysine-TiO2 with sputter-deposited titania as a smooth and hydrophilic model substrate was investigated using a layer-by-layer (LBL) approach to realize the required composite morphology. Characterization techniques such as X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), Kelvin probe force microscopy (KPFM), scanning electron microscopy (SEM) were used to characterize the formed layers. Our experimental results show that thin layers of rGO were assembled on the TiO2 using PLL. Furthermore, the PLL adsorbates decrease the work function difference between the rGO- and the non-rGO-coated surface and increased the specific discharge capacity of the LTO-rGO composite material. Further experimental studies are necessary to determine the influence of the PLL for aspects such as the solid electrolyte interface, dendrite formation, and crack formation.

Influence of Divalent Metal Ions on the Precipitation of the Plasma Protein Fibrinogen.

Fibrinogen nanofibers are very attractive biomaterials to mimic the native blood clot architecture. Previously, we reported the self-assembly of fibrinogen nanofibers in the presence of monovalent salts and have now studied how divalent salts influence fibrinogen precipitation. Although the secondary fibrinogen structure was significantly altered with divalent metal ions, morphological analysis revealed exclusively smooth fibrinogen precipitates. In situ monitoring of the surface roughness facilitated predicting the tendency of various salts to form fibrinogen fibers or smooth films. Analysis of the chemical composition revealed that divalent salts were removed from smooth fibrinogen films upon rinsing while monovalent Na+ species were still present in fibrinogen fibers. Therefore, we assume that the decisive factor controlling the morphology of fibrinogen precipitates is direct ion-protein contact, which requires disruption of the ion-surrounding hydration shells. We conclude that in fibrinogen aggregates, this mechanism is effective only for monovalent ions, whereas divalent ions are limited to indirect fibrinogen adsorption.

Impact of Laser Structuring on Medical-Grade Titanium: Surface Characterization and In Vitro Evaluation of Osteoblast Attachment.

Improved implant osteointegration offers meaningful potential for orthopedic, spinal, and dental implants. In this study, a laser treatment was used for the structuring of a titanium alloy (Ti6Al4V) surface combined with a titanium dioxide coating, whereby a porous surface was created. The objective was to characterize the pore structure shape, treatment-related metallographic changes, cytocompatibility, and attachment of osteoblast-like cells (MG-63). The treatment generated specific bottleneck pore shapes, offering the potential for the interlocking of osteoblasts within undercuts in the implant surface. The pore dimensions were a bottleneck diameter of 27 µm (SD: 4 µm), an inner pore width of 78 µm (SD: 6 µm), and a pore depth of 129 µm (SD: 8 µm). The introduced energy of the laser changed the metallic structure of the alloy within the heat-affected region (approximately 66 µm) without any indication of a micro cracking formation. The phase of the alloy (microcrystalline alpha + beta) was changed to a martensite alpha phase in the surface region and an alpha + beta phase in the transition region between the pores. The MG-63 cells adhered to the structured titanium surface within 30 min and grew with numerous filopodia over and into the pores over the following days. Cell viability was improved on the structured surface compared to pure titanium, indicating good cytocompatibility. In particular, the demonstrated affinity of MG-63 cells to grow into the pores offers the potential to provide significantly improved implant fixation in further in vivo studies.

Burst Release of Antibiotics Combined with Long-Term Release of Silver Targeting Implant-Associated Infections: Design, Characterization and in vitro Evaluation of Novel Implant Hybrid Surface.

Implant-associated infections represent a serious risk in human medicine and can lead to complications, revisions and in worst cases, amputations. To target these risks, the objective was to design a hybrid implant surface that allows a local burst release of antibiotics combined with long-term antimicrobial activity based on silver. The efficacy should be generated with simultaneous in vitro cytocompatibility. The investigations were performed on titanium K-wires and plates and gentamicin was selected as an illustrative antibiotic. A gentamicin depot (max 553 µg/cm2) was created on the surface using laser structuring. The antibiotic was released within 15 min in phosphate buffered saline (PBS) or agar medium. Metallic silver particles (4 µg/cm2) in a titanium dioxide layer were deposited using plasma vapor deposition (PVD). About 16% of the silver was released within 28 days in the agar medium. The local efficacy of the incorporated silver was demonstrated in a direct contact assay with a reduction of more than 99.99% (Escherichia coli). The local efficacy of the hybrid surface was confirmed in a zone of inhibition (ZOI) assay using Staphylococcus cohnii. The biocompatibility of the hybrid surface was proven using fibroblasts and osteoblasts as cell systems. The hybrid surface design seems to be promising as treatment of implant-associated infections, considering the achieved amount and release behavior of the active ingredients (gentamicin, silver). The generated in vitro results (efficacy, biocompatibility) proofed the concept. Further in vivo studies will be necessary translate the hybrid surface towards clinical applied research.

Uptake of Intact Copper Oxide Nanoparticles Causes Acute Toxicity in Cultured Glial Cells.

Copper oxide nanoparticles (CuO-NPs) dispersions are known for their high cell toxic potential but contaminating copper ions in such dispersions are a major hurdle in the investigation of specific nanoparticle-mediated toxicity. In order to distinguish between the adverse effects exhibited by CuO-NPs and/or by contaminating ionic copper, the membrane-impermeable copper chelator bathocuproine disulfonate (BCS) was added in a low molar ratio (20% of the total copper applied) in order to chelate the copper ions that had been released extracellularly from the CuO-NPs before or during the incubation. Physicochemical characterization of synthesized CuO-NPs revealed that the presence of this low concentration of BCS did not alter the size or zeta potential of the CuO-NPs. Application of CuO-NPs to C6 glioma cells and primary astrocytes induced a concentration- and temperature-dependent copper accumulation which was accompanied by a severe loss in cell viability. The adverse consequences of the CuO-NP application were not affected by the presence of 20% BCS, while the copper accumulation and cell toxicity observed after application of ionic copper were significantly lowered in the presence of BCS. These results demonstrate that for the experimental conditions applied the adverse consequences of an exposure of cultured glial cells to dispersions of CuO-NPs are mediated by accumulated NPs and not caused by the uptake of contaminating copper ions.

Chemical characterization of the adhesive secretions of the salamander Plethodon shermani (Caudata, Plethodontidae).

Salamanders have developed a wide variety of antipredator mechanisms, including tail autotomy, colour patterns, and noxious skin secretions. As an addition to these tactics, the red-legged salamander (Plethodon shermani) uses adhesive secretions as part of its defensive strategy. The high bonding strength, the fast-curing nature, and the composition of the biobased materials makes salamander adhesives interesting for practical applications in the medical sector. To understand the adhesive secretions of P. shermani, its components were chemically analysed by energy dispersive X-ray spectroscopy (EDX), inductively coupled plasma mass spectrometry (ICP-MS), amino acid analysis, and spectroscopy (ATR-IR, Raman). In addition, proteins were separated by gel-electrophoresis and selected spots were characterised by peptide mass fingerprinting. The salamander secretion contains a high amount of water and predominantly proteins (around 77% in the dry stage). The gel-electrophoresis and peptide mass fingerprint analyses revealed a de novo set of peptides/proteins, largely with a pI between 5.0 and 8.0 and a molecular mass distribution between 10 and 170 kDa. Only low homologies with other proteins present in known databases could be identified. The results indicate that the secretions of the salamander Plethodon clearly differ chemically from those shown for other glue-producing terrestrial or marine species and thus represent a unique glue system.

Characterization of the Fishing Lines in Titiwai (=Arachnocampa luminosa Skuse, 1890) from New Zealand and Australia.

Animals use adhesive secretions in a plethora of ways, either for attachment, egg anchorage, mating or as either active or passive defence. The most interesting function, however, is the use of adhesive threads to capture prey, as the bonding must be performed within milliseconds and under unsuitable conditions (movement of prey, variable environmental conditions, unfavourable attack angle, etc.) to be nonetheless successful. In the following study a detailed characterization of the prey capture system of the world-renowned glowworm group Arachnocampa from the macroscopic to the ultrastructural level is performed. The data reveal that the adhesive droplets consist mostly of water and display hygroscopic properties at varying humidity levels. The droplet core of Arachnocampa luminosa includes a certain amount of the elements sodium, sulphur and potassium (beside carbon, oxygen and nitrogen), while a different element composition is found in the two related species A. richardsae and A. tasmaniensis. Evidence for lipids, carbohydrates and proteins was negative on the histochemical level, however X-ray photoelectron spectroscopy confirm the presence of peptides within the droplet content. Different to earlier assumptions, the present study indicates that rather than oxalic acid, urea or uric acid are present in the adhesive droplets, presumably originating from the gut. Comparing the capture system in Arachnocampa with those of orb-spiders, large differences appear not only regarding the silky threads, but also, in the composition, hygroscopic properties and size of the mucous droplets.

Novel Biocompatible Adhesive for Intrarenal Embedding and Endoscopic Removal of Small Residual Fragments after Minimally Invasive Stone Treatment in an Ex Vivo Porcine Kidney Model: Initial Evaluation of a Prototype.

PURPOSE: Residual fragments related to endoscopic intracorporeal lithotripsy are a challenging problem. The impact of residual fragments remains a subject of discussion and growing evidence highlights that they have a central role in recurrent stone formation. Therefore, we developed a novel bioadhesive system for intrarenal embedding and retrieval of residual fragments after endoscopic lithotripsy in an ex vivo porcine kidney model. MATERIALS AND METHODS: In a standardized setting 30 human stone fragments 1 mm or less were inserted in the lower pole of an ex vivo porcine kidney model. We assessed the extraction efficacy of flexible ureteroscopy using the bioadhesive system in 15 preparations and a conventional retrieval basket in 15. Outcomes were compared regarding the endoscopic and macroscopic stone-free rate, and overall time of retrieval. RESULTS: Embedding and retrieving the residual fragment-bioadhesive complex were feasible in all trial runs. We observed no adverse effects such as adhesions between the adhesive and the renal collecting system or the instruments used. The stone-free rate was 100% and 60% in the bioadhesive and conventional retrieval groups, respectively (p = 0.017). Mean retrieval time was significantly shorter at 10 minutes 33 seconds vs 36 minutes 56 seconds in the bioadhesive group vs the conventional group (p = 0.001). CONCLUSIONS: This novel method involving adhesive based complete removal of residual fragments from the collecting system has proved to be feasible. Our evaluation in a porcine kidney model revealed that this technology performed well. Further tests, including inpatient studies, are required to thoroughly evaluate the benefit and potential drawbacks of bioadhesive based extraction of residual fragments after intracorporeal lithotripsy.

Lysosomal iron liberation is responsible for the vulnerability of brain microglial cells to iron oxide nanoparticles: comparison with neurons and astrocytes.

Iron oxide nanoparticles (IONPs) are used for various biomedical and neurobiological applications. Thus, detailed knowledge on the accumulation and toxic potential of IONPs for the different types of brain cells is highly warranted. Literature data suggest that microglial cells are more vulnerable towards IONP exposure than other types of brain cells. To investigate the mechanisms involved in IONP-induced microglial toxicity, we applied fluorescent dimercaptosuccinate-coated IONPs to primary cultures of microglial cells. Exposure to IONPs for 6 h caused a strong concentration-dependent increase in the microglial iron content which was accompanied by a substantial generation of reactive oxygen species (ROS) and by cell toxicity. In contrast, hardly any ROS staining and no loss in cell viability were observed for cultured primary astrocytes and neurons although these cultures accumulated similar specific amounts of IONPs than microglia. Co-localization studies with lysotracker revealed that after 6 h of incubation in microglial cells, but not in astrocytes and neurons, most IONP fluorescence was localized in lysosomes. ROS formation and toxicity in IONP-treated microglial cultures were prevented by neutralizing lysosomal pH by the application of NH4Cl or Bafilomycin A1 and by the presence of the iron chelator 2,2'-bipyridyl. These data demonstrate that rapid iron liberation from IONPs at acidic pH and iron-catalyzed ROS generation are involved in the IONP-induced toxicity of microglia and suggest that the relative resistance of astrocytes and neurons against acute IONP toxicity is a consequence of a slow mobilization of iron from IONPs in the lysosomal degradation pathway.

Biochemical analyses of the cement float of the goose barnacle Dosima fascicularis--a preliminary study.

The goose barnacle Dosima fascicularis produces an excessive amount of adhesive (cement), which has a double function, being used for attachment to various substrata and also as a float (buoy). This paper focuses on the chemical composition of the cement, which has a water content of 92%. Scanning electron microscopy with EDX was used to measure the organic elements C, O and N in the foam-like cement. Vibrational spectroscopy (FTIR, Raman) provided further information about the overall secondary structure, which tended towards a ß-sheet. Disulphide bonds could not be detected by Raman spectroscopy. The cystine, methionine, histidine and tryptophan contents were each below 1% in the cement. Analyses of the cement revealed a protein content of 84% and a total carbohydrate content of 1.5% in the dry cement. The amino acid composition, 1D/2D-PAGE and MS/MS sequence analysis revealed a de novo set of peptides/proteins with low homologies with other proteins such as the barnacle cement proteins, largely with an acidic pI between 3.5 and 6.0. The biochemical composition of the cement of D. fascicularis is similar to that of other barnacles, but it shows interesting variations.

Uptake and toxicity of copper oxide nanoparticles in cultured primary brain astrocytes.

To test for consequences of an exposure of brain cells to copper oxide nanoparticles (CuO-NPs), we synthesised and characterised dimercaptosuccinate-coated CuO-NPs. These particles had a diameter of around 5 nm as determined by transmission electron microscopy, while their average hydrodynamic diameter in aqueous dispersion was 136 ± 4 nm. Dispersion in cell-culture medium containing 10% fetal calf serum increased the hydrodynamic diameter to 178 ± 12 nm and shifted the zeta potential of the particles from -49 ± 7 mV (in water) to -10 ± 3 mV. Exposure of cultured primary brain astrocytes to CuO-NPs increased the cellular copper levels and compromised the cell viability in a time-, concentration- and temperature-dependent manner. Application of CuO-NPs in concentrations above 100 µM copper (6.4 µg/ml) severely compromised the viability of the cells, as demonstrated by a lowered 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide reduction capacity, a lowered cellular lactate dehydrogenase activity and an increased membrane permeability for the fluorescent dye propidium iodide. Copper internalisation as well as cell toxicity of astrocytes exposed to CuO-NPs were similar to that observed for cells that had been incubated with copper salts. The CuO-NP-induced toxicity was accompanied by an increase in the generation of reactive oxygen species (ROS) in the cells. Both, ROS formation and cell toxicity in CuO-NP-treated astrocytes, were lowered in the presence of the cell-permeable copper chelator tetrathiomolybdate. These data demonstrate that CuO-NPs are taken up by cultured astrocytes and suggest that excess of internalised CuO-NPs cause cell toxicity by accelerating the formation of ROS.

Uptake of fluorescent iron oxide nanoparticles by oligodendroglial OLN-93 cells.

To investigate the cellular accumulation and intracellular localization of dimercaptosuccinate-coated iron oxide nanoparticles (D-IONPs) in oligodendroglial cells, we have synthesized IONPs that contain the fluorescent dye BODIPY (BP) in their coat (BP-D-IONPs) and have investigated the potential effects of the absence or presence of this dye on the particle uptake by oligodendroglial OLN-93 cells. Fluorescent BP-D-IONPs and non-fluorescent D-IONPs had similar hydrodynamic diameters and ζ-potentials of around 60 nm and -58 mV, respectively, and showed identical colloidal stability in physiological media with increasing particle size and positivation of the ζ-potential in presence of serum. After exposure of oligodendroglial OLN-93 cells to BP-D-IONPs or D-IONPs in the absence of serum, the specific cellular iron content increased strongly to around 1,800 nmol/mg. This strong iron accumulation was lowered for both types of IONPs by around 50 % on exposure of the cells at 4 °C and by around 90 % on incubation in presence of 10 % serum. The accumulation of both D-IONPs and BP-D-IONPs in the absence of serum was not affected by endocytosis inhibitors, whereas in the presence of serum inhibitors of clathrin-dependent endocytosis lowered the particle accumulation by around 50 %. These data demonstrate that oligodendroglial cells efficiently accumulate IONPs by an endocytotic process which is strongly affected by the temperature and the presence of serum and that BP-D-IONPs are a reliable tool to monitor by fluorescence microscopy the uptake and cellular fate of D-IONPs.

Endocytotic uptake of iron oxide nanoparticles by cultured brain microglial cells.

Microglia are the phagocytotic cells of the brain that respond rapidly to alterations in brain homeostasis. Since iron oxide nanoparticles (IONPs) are used for diagnostic and therapeutic applications in the brain, the consequences of an exposure of microglial cells to IONPs are of particular interest. To address this topic we have synthesized and characterized fluorescent BODIPY®-labelled IONPs (BP-IONPs). The average hydrodynamic diameter and the ζ-potential of BP-IONPs in water were ∼65 nm and -49 mV, respectively. Both values increased after dispersion of the particles in serum containing incubation medium to ∼130 nm and -8 mV. Exposure of cultured rat microglial cells with BP-IONPs caused a time-, concentration- and temperature-dependent uptake of the particles, as demonstrated by strong increases in cellular iron contents and cellular fluorescence. Incubation for 3h with 150 and 450 µM iron as BP-IONPs increased the cellular iron content from a low basal level of ∼50 nmol iron mg(-1) to 219±52 and 481±28 nmol iron (mg protein)(-1), respectively. These conditions did not affect cell viability, but exposure to higher concentrations of BP-IONPs or for longer incubation periods severely compromised cell viability. The BP-IONP fluorescence in viable microglial cells was co-localized with lysosomes. In addition, BP-IONP accumulation was lowered by 60% in the presence of the endocytosis inhibitors 5-(N-ethyl-N-isopropyl)amiloride, tyrphostin23 and chlorpromazin. These results suggest that the rapid accumulation of BP-IONPs by microglial cells is predominantly mediated by macropinocytosis and clathrin-mediated endocytosis, which direct the accumulated particles into the lysosomal compartment.

Colloidal synthesis and structural control of PtSn bimetallic nanoparticles.

PtSn bimetallic nanoparticles with different particle sizes (1-9 nm), metal compositions (Sn content of 10-80 mol %), and organic capping agents (e.g., amine, thiol, carboxylic acid and polymer) were synthesized by colloidal chemistry methods. Transmission electron microscopy (TEM) measurements show that, depending on the particle size, the as-prepared bimetallic nanocrystals have quasi-spherical or faceted shapes. Energy-dispersive X-ray (EDX) analyses indicate that for all samples the signals of both Pt and Sn can be detected from single nanoparticles, confirming that the products are actually bimetallic but not only a physical mixture of pure Pt and Sn metal nanoparticles. X-ray diffraction (XRD) measurements were also conducted on the bimetallic particle systems. When compared with the diffraction patterns of monometallic Pt nanoparticles, the bimetallic samples show distinct shifts of the Bragg reflections to lower degrees, which gives clear proof of the alloying of Pt with Sn. However, a quantitative analysis of the lattice parameter shifts indicates that only part of the Sn atoms are incorporated into the alloy nanocrystals. This is consistent with X-ray photoelectron spectroscopy (XPS) measurements that reveal the segregation of Sn at the surfaces of the nanocrystals. Moreover, short PtSn bimetallic nanowires were synthesized by a seed-mediated growth method with amine-capped bimetallic particles as precursors. The resulting nanowires have an average width of 2.3 nm and lengths ranging from 5 to 20 nm.

Structural manipulation of colloidal silica.

Structural properties of the nanosized silica Ludox TMA with novel functionalizations have been investigated. Silica is stabilized in aqueous solution at a pH value higher than the pK(a) of silicic acid. A surface modification consisting of poly(p-benzamide)s functionalized with derivatized nucleobases on the C-terminus and cationic pyridinium functions on the N-terminus of the polymer chain was carried out. Due to the negatively charged surface, strong physisorption of the cationic pyridinium functions occurs. It is possible to stabilize diluted solutions of silica without agglomeration in solvents with various polarities by using pyridinium cations. Defined structures could be created according to the hydrogen donor/acceptor potential of the introduced nucleobase. Surprisingly the interactions between the same nucleobases are already sufficient for strong particle-particle interactions. Dramatic effects on the structural behavior are characterized by PCS, (S)TEM and EFTEM.

Uptake of dimercaptosuccinate-coated magnetic iron oxide nanoparticles by cultured brain astrocytes.

Magnetic iron oxide nanoparticles (Fe-NP) are currently considered for various diagnostic and therapeutic applications in the brain. However, little is known on the accumulation and biocompatibility of such particles in brain cells. We have synthesized and characterized dimercaptosuccinic acid (DMSA) coated Fe-NP and have investigated their uptake by cultured brain astrocytes. DMSA-coated Fe-NP that were dispersed in physiological medium had an average hydrodynamic diameter of about 60 nm. Incubation of cultured astrocytes with these Fe-NP caused a time- and concentration-dependent accumulation of cellular iron, but did not lead within 6 h to any cell toxicity. After 4 h of incubation with 100-4000 µM iron supplied as Fe-NP, the cellular iron content reached levels between 200 and 2000 nmol mg⁻¹ protein. The cellular iron content after exposure of astrocytes to Fe-NP at 4 °C was drastically lowered compared to cells that had been incubated at 37 °C. Electron microscopy revealed the presence of Fe-NP-containing vesicles in cells that were incubated with Fe-NP at 37 °C, but not in cells exposed to the nanoparticles at 4 °C. These data demonstrate that cultured astrocytes efficiently take up DMSA-coated Fe-NP in a process that appears to be saturable and strongly depends on the incubation temperature.

Pattern recognition in high-resolution electron microscopy of complex materials.

Structural features like defects or heterointerfaces in crystals or amorphous phases give rise to different local patterns in high-resolution electron micrographs or object wave functions. Pattern recognition techniques can be used to identify these typical patterns that constitute the image itself, as was already demonstrated for compositional changes in isostructural heterostructures, where the patterns within unit cells of the lattice were analyzed. To extend such analyses to more complex materials, we examined patterns in small circular areas centered on intensity maxima of the image. Nonsupervised clustering, namely, Ward's clustering method, was applied to these patterns. In two examples, a highly defective ZnMnTe layer on GaAs and a tunnel magneto resistance device, we demonstrate how typical patterns are identified by this method and how these results can be used for a further investigation of the microstructural properties of the sample.