RESUMO
In twin screw melt granulation, granules are produced by passing mixtures of drug substances and polymeric binders through twin screw extruder such that temperatures are maintained below melting point of drugs but above glass transition of polymers used, whereby the polymers coat surfaces of drug particles and cause their agglomeration into granules. Since various formulation factors, such as binder type and concentration, and processing variables like extrusion temperature, screw configuration, and screw speed, can influence the granulation process, the present investigation was undertaken to study their effects on tabletability of granules produced. Three different types of polymeric binders, Klucel® EXF (hydroxypropyl cellulose), Eudragit® EPO (polyacrylate binder), and Soluplus® (polyvinyl caprolactam-co-vinyl acetate-ethylene glycol graft polymer), were used at 2, 5, and 10% concentrations. Metformin hydrochloride (HCl) (mp: 222°C) and acetaminophen (mp: 169°C) were used as model drugs, and drug-polymer mixtures with metformin HCl were extruded at 180, 160, and 130°C, while those with acetaminophen were extruded at 130 and 110°C. Other process variables included screw configurations: low, medium, and high shear for metformin HCl, and low and medium shear for acetaminophen; feed rates: 20 and 60 g/min; and screw speed of 100 and 300 RPM. Formulation and process variables had significant impact on tabletability. The target tensile strength of ≥2 MPa could be obtained with all polymers and at all processing temperatures when metformin HCl was granulated at 180°C and acetaminophen at 130°C. At other temperatures, the target tensile strength could be achieved at certain specific sets of processing conditions.