Study of resistive switching behavior in HfO2nanocrystals synthesized via a low temperature hydrothermal method.

The resistive switching property in HfO2have attracted increasing interest in recent years. In this work, amorphous HfO2nanocrystals are synthesized by a facile hydrothermal method. Then, the as-synthesized nanocrystals are rapid thermal annealed in different atmospheres for improving the crystal quality, and monoclinic phase is determined as the main crystal structure of the annealed HfO2. Subsequently, metal-insulator-metal structure devices based on HfO2samples are fabricated. Electrical measurement indicates that 700 °C annealing processes in Air and Ar environments can slightly improve the bipolar resistive switching and retention behaviors. Higher annealed temperature (900 °C) will further improve the crystal quality of HfO2, while the resistive switching and retention behaviors of the devices continuously attenuate, which can be ascribed to the reduction of the conductive filaments induced by defects.

Improvement in the Thermal Conductivity of Silver Epoxy Adhesive by Treating with Water Vapor.

With the miniaturization of electronic devices, electronic packaging has become increasingly precise and complex, which presents a significant challenge in terms of heat dissipation. Electrically conductive adhesives (ECAs), particularly silver epoxy adhesives, have emerged as a new type of electronic packaging material, thanks to their high conductivity and stable contact resistance. However, while there has been extensive research on silver epoxy adhesives, little attention has been paid to improving their thermal conductivity, which is a critical requirement in the ECA industry. In this paper, we propose a straightforward method for treating silver epoxy adhesive with water vapor, resulting in a remarkable improvement in thermal conductivity to 9.1 W/(m·K), three times higher than the sample cured using traditional methods (2.7 W/(m·K)). Through research and analysis, the study demonstrates that the introduction of H2O into the gaps and holes of the silver epoxy adhesive increases the path of electron conduction, thereby improving thermal conductivity. Furthermore, this method has the potential to significantly improve the performance of packaging materials and meet the needs of high-performance ECAs.

Mn4+-Activated Double-Perovskite-Type Sr2LuNbO6 Multifunctional Phosphor for Optical Probing and Lighting.

Multifunctional phosphors have significant application and scientific value and are becoming a research hotspot in the field of luminescent materials. Herein, we report Mn4+-activated double-perovskite-type Sr2LuNbO6 multifunctional phosphors with excellent comprehensive properties in the fields of optical temperature/pressure sensing and w-LED lighting. The crystalline structure, elemental composition, optimal doping concentration, crystal-field strength, and optical bandgap of the phosphors are investigated in detail, and the mechanisms of concentration and thermal quenching are discussed. From the optimal Sr2LuNb0.998O6:0.2%Mn4+ phosphor, a LED lamp for indoor warm-white lighting is successfully fabricated. Further, the thermometric properties of the phosphors are explored for applications as FIR- and lifetime-based thermometers, showing a maximum relative sensitivity of 1.55% K-1 at 519 K. Upon pressure loading, a significant red-shift of the peak centroid is observed, and the pressure sensitivity is determined to be 0.82 nm/GPa. These results suggest that the Mn4+-activated Sr2LuNbO6 multifunctional phosphors have great potential to be utilized in the fields of optical thermometry, manometry, and lighting.