Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Mais filtros








Base de dados
Intervalo de ano de publicação
1.
Nanoscale ; 12(22): 11830-11841, 2020 Jun 11.
Artigo em Inglês | MEDLINE | ID: mdl-32459255

RESUMO

Molybdenum disulfide (MoS2) has emerged as a promising material for the development of efficient sensors. Here, we have exfoliated and decorated MoS2 flakes with the novel, single-phase multi-component silver-gold-copper-palladium-platinum (Ag-Au-Cu-Pd-Pt) alloy nanoparticles, popularly named High Entropy Alloy (HEA) nanoparticles, using facile and scalable low-temperature grinding, followed by the sonochemical method. It was found that the decoration of HEA nanoparticles imparts the surface-enhanced Raman scattering effect and reduction in the work function of the material from 4.9 to 4.75 eV as measured by UV photoelectron spectroscopy. This change in the work function resulted in a Schottky barrier between the gold contact and HEA decorated MoS2 flakes as a result of drastic changes in the surface chemical non-stoichiometry. The response to hydrogen gas was studied at temperatures in the range of 30 to 100 °C, and it showed an unusual p-type nature due to surface-adsorbed oxygen species. The nanoscale junction formed between HEA and MoS2 showed a ten-time increase in the response towards hydrogen gas at 80 °C. The experimental observations have been explained with DFT simulation showing more favourable hydrogen adsorption on HEA-decorated MoS2 resulting in an enhanced response.

2.
Nanoscale ; 10(18): 8840-8850, 2018 May 10.
Artigo em Inglês | MEDLINE | ID: mdl-29714367

RESUMO

Selective oxidation of CO to CO2 using metallic or alloy nanoparticles as catalysts can solve two major problems of energy requirements and environmental pollution. Achieving 100% conversion efficiency at a lower temperature is a very important goal. This requires sustained efforts to design and develop novel supported catalysts containing alloy nanoparticles. In this regard, the decoration of nanoalloys with graphene, as a support for the catalyst, can provide a novel structure due to the synergic effect of the nanoalloys and graphene. Here, we demonstrate the effect of nano-PdPt (Palladium-Platinum) alloys having different morphologies on the catalytic efficiency for the selective oxidation of CO. Efforts were made to prepare different morphologies of PdPt alloy nanoparticles with the advantage of tuning the capping agent (PVP - polyvinyl pyrollidone) and decorating them on graphene sheets via the wet-chemical route. The catalytic activity of the G-PdPt hybrids with an urchin-like morphology has been found to be superior (higher % conversion at 135 °C lower) to that with a nanoflower morphology. The above experimental observations are further supported by molecular dynamics (MD) simulations.

3.
Nanotechnology ; 29(26): 265707, 2018 Jun 29.
Artigo em Inglês | MEDLINE | ID: mdl-29624504

RESUMO

A liquid dielectric based on a core-shell architecture having a superparamagnetic iron oxide core and a shell of silicon dioxide was synthesized. The frequency dependence of dielectric properties was evaluated for different concentrations of iron oxide. The dependence of magnetic field on the dielectric properties was also studied. Aqueous ferrofluid exhibited a giant dielectric constant of 6.4 × 105 at 0.1 MHz at a concentration of 0.2 vol% and the loss tangent was 3. The large rise in dielectric constant at room temperature is modelled and explained using percolation theory and Maxwell-Wagner-Sillars type polarization. The ferrofluid is presumed to consist of nanocapacitor networks which are wired in series along the lateral direction and parallel along longitudinal direction. On the application of an external magnetic field, the chain formation and its alignment results in the variation of dielectric permittivity.

4.
J Fluoresc ; 26(5): 1541-8, 2016 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-27380200

RESUMO

Here we have demonstrated a novel single step technique of synthesis of highly fluorescent carbon nanoparticles (CNPs) from broth constituent and in vivo bioimaging of Caenorhabditis elegans (C. elegans) with the synthesized CNPs has been presented. The synthesized CNPs has been characterized by the UV-visible (UV-Vis) absorption spectroscopy, transmission electron microscopy (TEM) and Raman studies. The sp (2) cluster size of the synthesized samples has been determined from the measured Raman spectra by fitting it with the theoretical skew Lorentzian (Breit-Wigner- Fano (BWF)) line shape. The synthesised materials are showing excitation wavelength dependent tunable photoluminescence (PL) emission characteristics with a high quantum yield (QY) of 3 % at a very low concentration of CNPs. A remarkable increase in the intensity of PL emission from 16 % to 39 % in C. elegans has also been observed when the feeding concentration of CNPs to C. elegans is increased from 0.025 % to 0.1 % (w/v). The non-toxicity and water solubility of the synthesized material makes it ideal candidate for bioimaging.


Assuntos
Caenorhabditis elegans/metabolismo , Carbono/química , Corantes Fluorescentes/química , Imagem Molecular/métodos , Nanopartículas/química , Animais , Caenorhabditis elegans/química , Microscopia Eletrônica de Transmissão
5.
ACS Appl Mater Interfaces ; 6(3): 1986-91, 2014 Feb 12.
Artigo em Inglês | MEDLINE | ID: mdl-24417432

RESUMO

One of the most promising materials for fabricating cold cathodes for next generation high-performance flat panel devices is carbon nanotubes (CNTs). For this purpose, CNTs grown on metallic substrates are used to minimize contact resistance. In this report, we compare properties and field emission performance of CNTs grown via water assisted chemical vapor deposition using Inconel vs silicon (Si) substrates. Carbon nanotube forests grown on Inconel substrates are superior to the ones grown on silicon; low turn-on fields (∼1.5 V/µm), high current operation (∼100 mA/cm(2)) and very high local field amplification factors (up to ∼7300) were demonstrated, and these parameters are most beneficial for use in vacuum microelectronic applications.

6.
Colloids Surf B Biointerfaces ; 75(1): 175-8, 2010 Jan 01.
Artigo em Inglês | MEDLINE | ID: mdl-19783414

RESUMO

Recent advances in nanomaterial have produced a new class of fluorescence labels by conjugating noble metal with biomolecules. The nanometer size metal conjugates are water soluble, biocompatible and provide important advantage over the fluorescence dyes. In this regard we synthesized silver nanoparticles at the size of 2-4 nm using biological route and studied fluorescence property of these nanoparticles. We observe that these silver (Ag(+)) ions when exposed to filtrate of Trichoderma viride are reduced in solution, thereby leading to the formation of an extremely stable silver hydrosol. These silver nanoparticles were characterized by means of UV-vis spectrophotometer, FTIR, HrTEM, EDX, XRD and fluorescence spectroscopy. The nanoparticles exhibit maximum absorbance at 405 nm in UV-vis spectrum. The presence of proteins was identified by FTIR. The HrTEM micrograph revealed the formation of monodispersed spherical nanoparticles and the presence of elemental silver was confirmed by EDX analysis and XRD. These monodispersed silver nanoparticles showed emission in the range of 320-520 nm wavelength.


Assuntos
Luminescência , Nanopartículas Metálicas/química , Prata/química , Trichoderma/metabolismo , Nanopartículas Metálicas/ultraestrutura , Tamanho da Partícula , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios X
7.
Opt Lett ; 34(23): 3644-6, 2009 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-19953148

RESUMO

Three-photon-induced four-photon absorption via excited-state absorption and self-defocusing nonlinear refraction are reported for the first time, to our knowledge, in ZnO quantum dots with average sizes of 2.0+/-0.1 nm with 1064 nm radiation from a Q-switched Nd:YAG laser at a peak intensity of 2.5 GW/cm(2). By employing the three-level two-step model, the experimental results can be explained quite satisfactorily.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA