RESUMO
With the advent of personalized medicine, the drug delivery system will be changed significantly. The development of personalized medicine needs the support of many technologies, among which three-dimensional printing (3DP) technology is a novel formulation-preparing process that creates 3D objects by depositing printing materials layer-by-layer based on the computer-aided design method. Compared with traditional pharmaceutical processes, 3DP produces complex drug combinations, personalized dosage, and flexible shape and structure of dosage forms (DFs) on demand. In the future, personalized 3DP drugs may supplement and even replace their traditional counterpart. We systematically introduce the applications of 3DP technologies in the pharmaceutical industry and summarize the virtues and shortcomings of each technique. The release behaviors and control mechanisms of the pharmaceutical DFs with desired structures are also analyzed. Finally, the benefits, challenges, and prospects of 3DP technology to the pharmaceutical industry are discussed.
Assuntos
Sistemas de Liberação de Medicamentos , Medicina de Precisão , Medicina de Precisão/métodos , Impressão Tridimensional , Preparações Farmacêuticas , Desenho Assistido por ComputadorRESUMO
Effective oral drugs and vaccines require high delivery efficiency across the gastrointestinal epithelia and protection of medically effective payloads (i.e., immunogens) against gastric damage. In this study, hollowed nanocarriers (NCs: silica nanospheres and gold nanocages) with poly-l-lysine (PLL) coating and mammalian orthoreovirus cell attachment protein σ1 functionalization (NC-PLL-σ1) were explored as functional oral drug delivery vehicles (ODDVs). The transport of these ODDVs to mucosal lymphoid tissues could be facilitated by microfold cells (M-cells) mediated transcytosis (via σ1-α2-3-linked sialic acids adherence) across gastrointestinal epithelia. PLL coating provided protection and slow-release of rhodamine 6 G (R6G), a model payload. The transport effectiveness of these ODDVs was tested on intestinal organoid monolayers in vitro. When compared with other experimental groups, the fully functionalized ODDV system (with PLL-σ1) demonstrated two significant advantages: a significantly higher transport efficiency (198% over blank control at 48 h); and protection of payloads which led to both better transport efficiency and extended-release of payloads (61% over uncoated carriers at 48 h). In addition, it was shown that the M cell presence in intestinal organoid monolayers (modulated by Rank L stimulation) was a determining factor on the transport efficiency of the ODDVs: more M-cells (induced by higher Rank L) in the organoid monolayers led to higher transport efficiency for ODDV-delivered model payload (R6G). The fully functionalized ODDVs showed great potential as effective oral delivery vehicles for drugs and vaccines.
RESUMO
High wear rates during the tillage process often result in significant financial losses and wasted farming seasons. In this paper, a bionic design was used to reduce tillage wear. Inspired by wear-resistant animals with ribbed structures, the bionic ribbed sweep (BRS) was designed by combining a ribbed unit with a conventional sweep (CS). BRSs with different parameters (width φ, height h, angle θ, and interval λ) were simulated and optimized using the DEM and RSM methods at a working depth of 60 mm to evaluate the magnitude and trends of three responses: tillage resistance (TR), number of contacts between the sweep and soil particles (CNSP), and Archard wear value (AW). The results showed that a protective layer could be created on the surface of the sweep with a ribbed structure to reduce abrasive wear. Analysis of variance proved that factors φ, θ, and λ had significant effects on AW, CNSP, and TR, while factor h was insignificant. An optimal solution was obtained using the desirability method, including 8.88 mm φ, 1.05 mm h, 3.01 mm λ, and 34.46° θ. Wear tests and simulations showed that wear loss could be effectively reduced at different speeds by the optimized BRS. It was found to be feasible to create a protective layer to reduce partial wear by optimizing the parameters of the ribbed unit.
RESUMO
Resin-based friction materials (RBFM) are widely used in the fields of automobiles, agriculture machinery and engineering machinery, and they are vital for safe and stable operation. In this paper, polymer ether ketone (PEEK) fibers were added to RBFM to enhance its tribological properties. Specimens were fabricated by wet granulation and hot-pressing. The relationship between intelligent reinforcement PEEK fibers and tribological behaviors was investigated by a JF150F-II constant-speed tester according to GB/T 5763-2008, and the worn surface morphology was observed using an EVO-18 scanning electron microscope. The results showed that PEEK fibers can efficiently enhance the tribological properties of RBFM. A specimen with 6 ωt% PEEK fibers obtained the optimal tribological performance, the fade ratio was -6.2%, which was much higher than that of the specimen without the addition of PEEK fibers, the recovery ratio was 108.59% and the wear rate was the lowest, which was 1.497 × 10-7 cm3/(Nm)-1. The reason for the enhancing tribological performance was that, on the one hand, PEEK fibers have a high strength and modulus which can enhance the specimens at lower temperatures; on the other hand, molten PEEK at high temperatures can also promote the formation of secondary plateaus, which are beneficial for friction. The results in this paper can lay a foundation for future studies on intelligent RBFM.
RESUMO
Because of the excellent thermal conduction, corrosion resistance, and tribological properties, copper-based friction materials (CBFMs) were widely used in airplanes, high-speed trains, and wind power generation. With operating speed continuously increasing, CBFMs are suffering more complicated and extreme working conditions, which would cause abnormal abrasion. This paper presents an experiment to investigate how the tribological behaviors of CBFMs are regulated by granulation technology. Samples were prepared by the method of granulation and cool-pressed sinter. The tribological properties of specimens with different granule sizes were studied. The results showed that granulation could improve the tribological properties of CBFMs. The friction coefficient (COF) increased first and then decreased with increasing granule size. Specimen fabricated with 5-8 mm granules obtained the lowest COF, which was reduced by 22.49% than that made of powders. Moreover, the wear rate decreased first and then increased as granule size increased. The wear rate of samples prepared by granules 3-5 mm was lower than that of all of the other samples. This is because the structured samples prepared by wet granulation can promote the formation of secondary plateaus, which are beneficial for enhancing tribological properties. This makes granulation a promising method for enhancing the tribological performances of CBFMs.
RESUMO
The objective of this work was to explore how selection of feedstock affects nitrogen cycle genes during composting, which eventually determines the nitrogen loss. Four composting mixes (CM: chicken manure; SM: sheep manure; MM1/3: mixed manure with CM: SM = 1:3 w/w, MM3/1: CM: SM = 3:1 w/w) were investigated. Results showed that adding 25 % and 75 % SM to CM reduced 26.5 % and 57.9 % nitrogen loss, respectively. CM contained more ammonification genes and nrfA gene, while SM had more denitrification genes. Nitrogen fixation genes in CM were slightly higher than that in SM at the initial stage, but they sharply dropped off as the composting entered the high temperature stage. MM1/3 showed significantly reduced ammonification genes than CM, and increased nitrogen fixation and NH4+ assimilation genes. Therefore, adding SM to CM could change the abundance of genes and enzymes related to nitrogen cycle to reduce nitrogen loss.
Assuntos
Compostagem , Animais , Galinhas , Esterco , Nitrogênio , Ciclo do Nitrogênio , Ovinos , SoloRESUMO
In this review, we aim to provide a summary of recent research advancements and applications of algin (i.e., alginic acid) and alginate-hybrid materials (AHMs) in medical fields. Algin/alginate are abundant natural products that are chemically inert and biocompatible, and they have superior gelation properties, good mechanical strengths, and biodegradability. The AHMs have been widely applied in wound dressing, cell culture, tissue engineering, and drug delivery. However, medical applications in different fields require different properties in the AHMs. The drug delivery application requires AHMs to provide optimal drug loading, controlled and targeted drug-releasing, and/or visually guided drug delivery. AHMs for wound dressing application need to have improved mechanical properties, hydrophilicity, cell adhesion, and antibacterial properties. AHMs for tissue engineering need improved mechanical properties that match the target organs, superior cell affinity, and cell loading capacity. Various methods to produce AHMs that meet different needs were summarized. Formulations to form AHMs with improved stability, drug/cell-loading capacity, cell adhesion, and mechanical properties are active research areas. This review serves as a road map to provide insights into the strategies to develop AHMs in medical applications.
Assuntos
Alginatos , Ácido Algínico , Alginatos/química , Engenharia Tecidual , Sistemas de Liberação de Medicamentos , Técnicas de Cultura de Células , Hidrogéis/química , Materiais Biocompatíveis/químicaRESUMO
This review aims to provide an informative summary of studies on extraction and nanoencapsulation of phlorotannins to improve their bioavailability and bioactivity. The origin, structure, and different types of phlorotannins were briefly discussed, and the extraction/purification/characterization methods for phlorotannins were reviewed, with a focus on techniques to improve the bioactivities and bioavailability of phlorotannins via nano-sized delivery systems. Phlorotannins are promising natural polyphenol compounds that have displayed high bioactivities in several areas: anticancer, anti-inflammation, anti-HIV, antidiabetic, and antioxidant. This review aims to provide a useful reference for researchers working on developing better utilization strategies for phlorotannins as pharmaceuticals, therapeuticals, and functional food supplements.
Assuntos
Antioxidantes/farmacologia , Phaeophyceae , Taninos/farmacologia , Antioxidantes/administração & dosagem , Antioxidantes/química , Organismos Aquáticos , Disponibilidade Biológica , Produtos Biológicos , Sistemas de Liberação de Medicamentos , Humanos , Nanopartículas , Taninos/administração & dosagem , Taninos/químicaRESUMO
Compared with subcutaneous or intramuscular routes for vaccination, vaccine delivery via the gastrointestinal mucosa has tremendous potential as it is easy to administer and pain-free. Robust immune responses can be triggered successfully once the vaccine carrying an antigen reaches the mucosal associated lymphoid sites (e.g., Peyer's patches). However, the absence of an efficient delivery method has always been an issue for successful oral vaccine development. In our study, inspired by mammalian orthoreovirus (MRV) transport into the gut mucosal lymphoid tissue via Microfold cells (M cells), artificial virus-like nanocarriers (AVNs), consisting of gold nanocages functionalized with the σ1 protein from mammalian reovirus (MRV), were tested as an effective oral vaccine delivery vehicle targeting M cells. AVNs were shown to have a significantly higher transport compared to other experimental groups across mouse organoid monolayers containing M cells. These findings suggest that AVNs have the potential to be an M cell-specific oral vaccine/drug delivery vehicle.
Assuntos
Nódulos Linfáticos Agregados , Vacinas , Animais , Antígenos , Mucosa Intestinal , CamundongosRESUMO
Well-defined 1D microwires of CuPcOC4 with diameters of about 1.0 microm and lengths ranging from 260 to 300 microm as well as ultralong microwires (>5 mm) with diameters of about 10 microm and high length/diameter aspect ratios were synthesized via a simple solution process. Electrical conductive devices based on these microwires fabricated in situ on glass substrates with two ITO electrodes exhibited excellent conductivity properties.