Chemoautotrophic production of gaseous hydrocarbons, bioplastics and osmolytes by a novel Halomonas species.

BACKGROUND: Production of relatively low value, bulk commodity chemicals and fuels by microbial species requires a step-change in approach to decrease the capital and operational costs associated with scaled fermentation. The utilisation of the robust and halophilic industrial host organisms of the genus Halomonas could dramatically decrease biomanufacturing costs owing to their ability to grow in seawater, using waste biogenic feedstocks, under non-sterile conditions. RESULTS: We describe the isolation of Halomonas rowanensis, a novel facultative chemoautotrophic species of Halomonas from a natural brine spring. We investigated the ability of this species to produce ectoine, a compound of considerable industrial interest, under heterotrophic conditions. Fixation of radiolabelled NaH14CO3 by H. rowanensis was confirmed in mineral medium supplied with thiosulfate as an energy source. Genome sequencing suggested carbon fixation proceeds via a reductive tricarboxylic acid cycle, and not the Calvin-Bensen-Bassham cycle. The mechanism of energy generation to support chemoautotrophy is unknown owing to the absence of an annotated SOX-based thiosulfate-mediated energy conversion system. We investigated further the biotechnological potential of the isolated H. rowanensis by demonstrating production of the gaseous hydrocarbon (bio-propane), bioplastics (poly-3-hydroxybutyrate) and osmolytes (ectoine) under heterotrophic and autotrophic CO2 fixation growth conditions. CONCLUSIONS: This proof-of-concept study illustrates the value of recruiting environmental isolates as industrial hosts for chemicals biomanufacturing, where CO2 utilisation could replace, or augment, the use of biogenic feedstocks in non-sterile, industrialised bioreactors.

Biosynthesis of cannabigerol and cannabigerolic acid: the gateways to further cannabinoid production.

Cannabinoids are a therapeutically valuable class of secondary metabolites with a vast number of substituents. The native cannabinoid biosynthetic pathway of Cannabis sativa generates cannabigerolic acid (CBGA), the common substrate to multiple cannabinoid synthases. The bioactive decarboxylated analog of this compound, cannabigerol (CBG), represents an alternate gateway into the cannabinoid space as a substrate either to non-canonical cannabinoid synthase homologs or to synthetic chemical reactions. Herein, we describe the identification and repurposing of aromatic prenyltransferase (AtaPT), which when coupled with native enzymes of C. sativa can form an Escherichia coli production system for CBGA in cell lysates and CBG in whole cells. Engineering of AtaPT, guided by structural analysis, was performed to enhance its kinetics toward CBGA production for subsequent use in a proof-of-concept lysate system. For the first time, we show a synthetic biology platform for CBG biosynthesis in E. coli cells by employing AtaPT under an optimized microbial system. Our results have therefore set the foundation for sustainable production of well-researched and rarer cannabinoids in an E. coli chassis. Graphical Abstract.

Online Omics Platform Expedites Industrial Application of Halomonas bluephagenesis TD1.0.

Multi-omic data mining has the potential to revolutionize synthetic biology especially in non-model organisms that have not been extensively studied. However, tangible engineering direction from computational analysis remains elusive due to the interpretability of large datasets and the difficulty in analysis for non-experts. New omics data are generated faster than our ability to use and analyse results effectively, resulting in strain development that proceeds through classic methods of trial-and-error without insight into complex cell dynamics. Here we introduce a user-friendly, interactive website hosting multi-omics data. Importantly, this new platform allows non-experts to explore questions in an industrially important chassis whose cellular dynamics are still largely unknown. The web platform contains a complete KEGG (Kyoto Encyclopedia of Genes and Genomes) pathway enrichment analysis derived from principal components analysis, an interactive bio-cluster heatmap analysis of genes, and the Halomonas TD1.0 genome-scale metabolic (GEM) model. As a case study of the effectiveness of this platform, we applied unsupervised machine learning to determine key differences between Halomonas bluephagenesis TD1.0 cultivated under varied conditions. Specifically, cell motility and flagella apparatus are identified to drive energy expenditure usage at different osmolarities, and predictions were verified experimentally using microscopy and fluorescence labelled flagella staining. As more omics projects are completed, this landing page will facilitate exploration and targeted engineering efforts of the robust, industrial chassis H bluephagenesis for researchers without extensive bioinformatics background.

Co-production of biofuel, bioplastics and biochemicals during extended fermentation of Halomonas bluephagenesis.

Halomonas bluephagenesis TD1.0 was engineered to produce the biofuel propane, bioplastic poly-3-hydroxybutyrate (PHB), and biochemicals mandelate and hydroxymandelate in a single, semi-continuous batch fermentation under non-sterile conditions. Multi-product separation was achieved by segregation of the headspace gas (propane), fermentation broth ([hydroxy]mandelate) and cellular biomass (PHB). Engineering was performed by incorporating the genes encoding fatty acid photodecarboxylase (CvFAP) and hydroxymandelic acid synthase (SyHMAS) into a H. bluephagenesis hmgCAB cassette knockout to channel flux towards (hydroxy)mandelate. Design of Experiment strategies were coupled with fermentation trials to simultaneously optimize each product. Propane and mandelate titres were the highest reported for H. bluephagenesis (62 g/gDCW and 71 ± 10 mg/L respectively) with PHB titres (69% g/gDCW) comparable to other published studies. This proof-of-concept achievement of four easily separated products within one fermentation is a novel achievement probing the versatility of biotechnology, further elevating H. bluephagenesis as a Next Generation Industrial Biotechnology (NGIB) chassis by producing highly valued products at a reduced cost.

Bioproduction of Linalool From Paper Mill Waste.

A key challenge in chemicals biomanufacturing is the maintenance of stable, highly productive microbial strains to enable cost-effective fermentation at scale. A "cookie-cutter" approach to microbial engineering is often used to optimize host stability and productivity. This can involve identifying potential limitations in strain characteristics followed by attempts to systematically optimize production strains by targeted engineering. Such targeted approaches however do not always lead to the desired traits. Here, we demonstrate both 'hit and miss' outcomes of targeted approaches in attempts to generate a stable Escherichia coli strain for the bioproduction of the monoterpenoid linalool, a fragrance molecule of industrial interest. First, we stabilized linalool production strains by eliminating repetitive sequences responsible for excision of pathway components in plasmid constructs that encode the pathway for linalool production. These optimized pathway constructs were then integrated within the genome of E. coli in three parts to eliminate a need for antibiotics to maintain linalool production. Additional strategies were also employed including: reduction in cytotoxicity of linalool by adaptive laboratory evolution and modification or homologous gene replacement of key bottleneck enzymes GPPS/LinS. Our study highlights that a major factor influencing linalool titres in E. coli is the stability of the genetic construct against excision or similar recombination events. Other factors, such as decreasing linalool cytotoxicity and changing pathway genes, did not lead to improvements in the stability or titres obtained. With the objective of reducing fermentation costs at scale, the use of minimal base medium containing paper mill wastewater secondary paper fiber as sole carbon source was also investigated. This involved simultaneous saccharification and fermentation using either supplemental cellulase blends or by co-expressing secretable cellulases in E. coli containing the stabilized linalool production pathway. Combined, this study has demonstrated a stable method for linalool production using an abundant and low-cost feedstock and improved production strains, providing an important proof-of-concept for chemicals production from paper mill waste streams. For scaled production, optimization will be required, using more holistic approaches that involve further rounds of microbial engineering and fermentation process development.

Combinatorial use of environmental stresses and genetic engineering to increase ethanol titres in cyanobacteria.

Current industrial bioethanol production by yeast through fermentation generates carbon dioxide. Carbon neutral bioethanol production by cyanobacteria uses biological fixation (photosynthesis) of carbon dioxide or other waste inorganic carbon sources, whilst being sustainable and renewable. The first ethanologenic cyanobacterial process was developed over two decades ago using Synechococcus elongatus PCC 7942, by incorporating the recombinant pdc and adh genes from Zymomonas mobilis. Further engineering has increased bioethanol titres 24-fold, yet current levels are far below what is required for industrial application. At the heart of the problem is that the rate of carbon fixation cannot be drastically accelerated and carbon partitioning towards bioethanol production impacts on cell fitness. Key progress has been achieved by increasing the precursor pyruvate levels intracellularly, upregulating synthetic genes and knocking out pathways competing for pyruvate. Studies have shown that cyanobacteria accumulate high proportions of carbon reserves that are mobilised under specific environmental stresses or through pathway engineering to increase ethanol production. When used in conjunction with specific genetic knockouts, they supply significantly more carbon for ethanol production. This review will discuss the progress in generating ethanologenic cyanobacteria through chassis engineering, and exploring the impact of environmental stresses on increasing carbon flux towards ethanol production.

Flavin oxidation state impacts on nitrofuran antibiotic binding orientation in nitroreductases.

Nitroreductases catalyse the NAD(P)H-dependent nitro reduction in nitrofuran antibiotics, which activates them into cytotoxic molecules leading to cell death. The design of new effective nitrofuran antibiotics relies on knowledge of the kinetic mechanism and nitrofuran binding mode of microbial nitroreductases NfsA and NfsB. This has been hampered by multiple co-crystallisation studies revealing ligand binding in non-electron transfer competent states. In a recent study by Day et al. (2021) the authors investigated the likely reaction mechanism and mode of nitrofurantoin binding to NfsA using potentiometry, global kinetics analysis, crystallography and molecular dynamics simulations. Their findings suggest nitrofurantoin reduction proceeds via a direct hydride transfer from reduced FMN, while the crystallographic binding orientation is an inhibitory complex. Molecular dynamics simulations suggest ligand binding orientations is dependent on the oxidation state of the FMN. This study highlights the importance of utilising computational studies alongside traditional crystallographic approaches, when multiple stable ligand binding orientations can occur.

Consolidated Bioprocessing: Synthetic Biology Routes to Fuels and Fine Chemicals.

The long road from emerging biotechnologies to commercial "green" biosynthetic routes for chemical production relies in part on efficient microbial use of sustainable and renewable waste biomass feedstocks. One solution is to apply the consolidated bioprocessing approach, whereby microorganisms convert lignocellulose waste into advanced fuels and other chemicals. As lignocellulose is a highly complex network of polymers, enzymatic degradation or "saccharification" requires a range of cellulolytic enzymes acting synergistically to release the abundant sugars contained within. Complications arise from the need for extracellular localisation of cellulolytic enzymes, whether they be free or cell-associated. This review highlights the current progress in the consolidated bioprocessing approach, whereby microbial chassis are engineered to grow on lignocellulose as sole carbon sources whilst generating commercially useful chemicals. Future perspectives in the emerging biofoundry approach with bacterial hosts are discussed, where solutions to existing bottlenecks could potentially be overcome though the application of high throughput and iterative Design-Build-Test-Learn methodologies. These rapid automated pathway building infrastructures could be adapted for addressing the challenges of increasing cellulolytic capabilities of microorganisms to commercially viable levels.

Promoter engineering for microbial bio-alkane gas production.

Successful industrial biotechnological solutions to biofuels and other chemicals production rely on effective competition with existing lower-cost natural sources and synthetic chemistry approaches enabled by adopting low-cost bioreactors and processes. This is achievable by mobilizing Halomonas as a next generation industrial chassis, which can be cultivated under non-sterile conditions. To increase the cost effectiveness of an existing sustainable low carbon bio-propane production strategy, we designed and screened a constitutive promoter library based on the known strong porin promoter from Halomonas. Comparative studies were performed between Escherichia coli and Halomonas using the reporter gene red fluorescent protein (RFP). Later studies with a fatty acid photodecarboxylase-RFP fusion protein demonstrated tuneable propane production in Halomonas and E. coli, with an ∼8-fold improvement in yield over comparable isopropyl-ß-D-thiogalactoside-inducible systems. This novel set of promoters is a useful addition to the synthetic biology toolbox for future engineering of Halomonas to make chemicals and fuels.

Engineering nature for gaseous hydrocarbon production.

The development of sustainable routes to the bio-manufacture of gaseous hydrocarbons will contribute widely to future energy needs. Their realisation would contribute towards minimising over-reliance on fossil fuels, improving air quality, reducing carbon footprints and enhancing overall energy security. Alkane gases (propane, butane and isobutane) are efficient and clean-burning fuels. They are established globally within the transportation industry and are used for domestic heating and cooking, non-greenhouse gas refrigerants and as aerosol propellants. As no natural biosynthetic routes to short chain alkanes have been discovered, de novo pathways have been engineered. These pathways incorporate one of two enzymes, either aldehyde deformylating oxygenase or fatty acid photodecarboxylase, to catalyse the final step that leads to gas formation. These new pathways are derived from established routes of fatty acid biosynthesis, reverse ß-oxidation for butanol production, valine biosynthesis and amino acid degradation. Single-step production of alkane gases in vivo is also possible, where one recombinant biocatalyst can catalyse gas formation from exogenously supplied short-chain fatty acid precursors. This review explores current progress in bio-alkane gas production, and highlights the potential for implementation of scalable and sustainable commercial bioproduction hubs.

Thermal, electrochemical and photochemical reactions involving catalytically versatile ene reductase enzymes.

Successful exploitation of biocatalytic processes employing flavoproteins requires the implementation of cost-effective solutions to circumvent the need to supply costly nicotinamide coenzymes as reducing equivalents. Chemical syntheses harnessing the power of the flavoprotein ene reductases will likely increase the range and/or optical purity of available fine chemicals and pharmaceuticals due to their ability to catalyze asymmetric bioreductions. This review will outline current progress in the design of alternative routes to ene reductase flavin activation, most notably within the Old Yellow Enzyme family. A variety of chemical, enzymatic, electrochemical and photocatalytic routes have been employed, designed to eliminate the need for nicotinamide coenzymes or provide cost-effective alternatives to efficient recycling. Photochemical approaches have also enabled novel mechanistic routes of ene reductases to become available, opening up the possibility of accessing a wider range of non-natural chemical diversity.

Renewable and tuneable bio-LPG blends derived from amino acids.

BACKGROUND: Microbial biorefinery approaches are beginning to define renewable and sustainable routes to clean-burning and non-fossil fuel-derived gaseous alkanes (known as 'bio-LPG'). The most promising strategies have used a terminal fatty acid photodecarboxylase, enabling light-driven propane production from externally fed waste butyric acid. Use of Halomonas (a robust extremophile microbial chassis) with these pathways has enabled bio-LPG production under non-sterile conditions and using waste biomass as the carbon source. Here, we describe new engineering approaches to produce next-generation pathways that use amino acids as fuel precursors for bio-LPG production (propane, butane and isobutane blends). RESULTS: Multiple pathways from the amino acids valine, leucine and isoleucine were designed in E. coli for the production of propane, isobutane and butane, respectively. A branched-chain keto acid decarboxylase-dependent pathway utilising fatty acid photodecarboxylase was the most effective route, generating higher alkane gas titres over alternative routes requiring coenzyme A and/or aldehyde deformylating oxygenase. Isobutane was the major gas produced in standard (mixed amino acid) medium, however valine supplementation led to primarily propane production. Transitioning pathways into Halomonas strain TQ10 enabled fermentative production of mixed alkane gases under non-sterile conditions on simple carbon sources. Chromosomal integration of inducible (~ 180 mg/g cells/day) and constitutive (~ 30 mg/g cells/day) pathways into Halomonas generated production strains shown to be stable for up to 7 days. CONCLUSIONS: This study highlights new microbial pathways for the production of clean-burning bio-LPG fuels from amino acids. The use of stable Halomonas production strains could lead to gas production in the field under non-sterile conditions following process optimisation.

Structure of the Cannabis sativa olivetol-producing enzyme reveals cyclization plasticity in type III polyketide synthases.

In the native pathway to therapeutic cannabinoid biosynthesis in Cannabis sativa, the three-step production of a key intermediate, olivetolic acid, is catalysed by the enzymes tetraketide synthase (TKS; linear tetraketide intermediate production in two stages) and olivetolic acid cyclase (OAC; final C2 â†’ C7 aldol condensation). In the absence of OAC, a nonenzymatic C2 â†’ C7 decarboxylative aldol condensation of the tetraketide intermediate occurs forming olivetol. TKS is a type III polyketide synthase, and the question arises why it is unable to form olivetolic acid directly, but instead forms this unwanted side product. We determined the TKS, CoA complex structure, and performed structurally guided mutagenesis studies to identify potential residues responsible for cyclization pathway discrimination in type III polyketide synthases. Prior studies suggested an 'aldol switch' is necessary to allow linear tetraketide intermediate release prior to cyclization, thereby enabling subsequent olivetolic acid production by OAC. However, our studies do not support the presence of a universal or predictable 'aldol switch' consensus sequence. Instead, we propose the mode of ordered active site water activation between type III polyketide synthases catalysing different cyclization mechanisms is subtle and homologue-specific. Our work indicates that subtle structural variations between homologous enzymes can have a major mechanistic impact on the catalytic outcome. This highlights the importance of embedding high-resolution structural analysis of multiple enzyme homologues with classical site-directed mutagenesis studies when investigating highly similar enzymes with different mechanistic pathway outcomes. ENZYMES: TKS, EC 2.3.1.206; OAC, EC 4.4.1.26; chalcone synthase, EC 2.3.1.74; stilbene synthase, EC 2.3.1.95; 2-PS, EC 2.3.1.-. ACCESSION NUMBERS: The atomic coordinates and structure factors for the crystal structure of TKS have been deposited in the Protein Data Bank with accession number 6GW3.

Discovery, Characterisation, Engineering and Applications of Ene Reductases for Industrial Biocatalysis.

Recent studies of multiple enzyme families collectively referred to as ene-reductases (ERs) have highlighted potential industrial application of these biocatalysts in the production of fine and speciality chemicals. Processes have been developed whereby ERs contribute to synthetic routes as isolated enzymes, components of multi-enzyme cascades, and more recently in metabolic engineering and synthetic biology programmes using microbial cell factories to support chemicals production. The discovery of ERs from previously untapped sources and the expansion of directed evolution screening programmes, coupled to deeper mechanistic understanding of ER reactions, have driven their use in natural product and chemicals synthesis. Here we review developments, challenges and opportunities for the use of ERs in fine and speciality chemicals manufacture. The ER research field is rapidly expanding and the focus of this review is on developments that have emerged predominantly over the last 4 years.

C3 and C6 Modification-Specific OYE Biotransformations of Synthetic Carvones and Sequential BVMO Chemoenzymatic Synthesis of Chiral Caprolactones.

The scope for biocatalytic modification of non-native carvone derivatives for speciality intermediates has hitherto been limited. Additionally, caprolactones are important feedstocks with diverse applications in the polymer industry and new non-native terpenone-derived biocatalytic caprolactone syntheses are thus of potential value for industrial biocatalytic materials applications. Biocatalytic reduction of synthetic analogues of R-(-)-carvone with additional substituents at C3 or C6, or both C3 and C6, using three types of OYEs (OYE2, PETNR and OYE3) shows significant impact of both regio-substitution and the substrate diastereomer. Bioreduction of (-)-carvone derivatives substituted with a Me and/or OH group at C6 is highly dependent on the diastereomer of the substrate. Derivatives bearing C6 substituents larger than methyl moieties are not substrates. Computer docking studies of PETNR with both (6S)-Me and (6R)-Me substituted (-)-carvone provides a model consistent with the outcomes of bioconversion. The products of bioreduction were efficiently biotransformed by the Baeyer-Villiger monooxygenase (BVase) CHMO_Phi1 to afford novel trisubstituted lactones with complete regioselectivity to provide a new biocatalytic entry to these chiral caprolactones. This provides both new non-native polymerization feedstock chemicals, but also with enhanced efficiency and selectivity over native (+)-dihydrocarvone Baeyer-Villigerase expansion. Optimum enzymatic reactions were scaled up to 60-100 mg, demonstrating the utility for preparative biocatalytic synthesis of both new synthetic scaffold-modified dihydrocarvones and efficient biocatalytic entry to new chiral caprolactones, which are potential single-isomer chiral polymer feedstocks.

From Bugs to Bioplastics: Total (+)-Dihydrocarvide Biosynthesis by Engineered Escherichia coli.

The monoterpenoid lactone derivative (+)-dihydrocarvide ((+)-DHCD) can be polymerised to form shape-memory polymers. Synthetic biology routes from simple, inexpensive carbon sources are an attractive, alternative route over chemical synthesis from (R)-carvone. We have demonstrated a proof-of-principle in vivo approach for the complete biosynthesis of (+)-DHCD from glucose in Escherichia coli (6.6 mg L-1 ). The pathway is based on the Mentha spicata route to (R)-carvone, with the addition of an 'ene'-reductase and Baeyer-Villiger cyclohexanone monooxygenase. Co-expression with a limonene synthesis pathway enzyme enables complete biocatalytic production within one microbial chassis. (+)-DHCD was successfully produced by screening multiple homologues of the pathway genes, combined with expression optimisation by selective promoter and/or ribosomal binding-site screening. This study demonstrates the potential application of synthetic biology approaches in the development of truly sustainable and renewable bioplastic monomers.

Machine Learning of Designed Translational Control Allows Predictive Pathway Optimization in Escherichia coli.

The field of synthetic biology aims to make the design of biological systems predictable, shrinking the huge design space to practical numbers for testing. When designing microbial cell factories, most optimization efforts have focused on enzyme and strain selection/engineering, pathway regulation, and process development. In silico tools for the predictive design of bacterial ribosome binding sites (RBSs) and RBS libraries now allow translational tuning of biochemical pathways; however, methods for predicting optimal RBS combinations in multigene pathways are desirable. Here we present the implementation of machine learning algorithms to model the RBS sequence-phenotype relationship from representative subsets of large combinatorial RBS libraries allowing the accurate prediction of optimal high-producers. Applied to a recombinant monoterpenoid production pathway in Escherichia coli, our approach was able to boost production titers by over 60% when screening under 3% of a library. To facilitate library screening, a multiwell plate fermentation procedure was developed, allowing increased screening throughput with sufficient resolution to discriminate between high and low producers. High producers from one library did not translate during scale-up, but the reduced screening requirements allowed rapid rescreening at the larger scale. This methodology is potentially compatible with any biochemical pathway and provides a powerful tool toward predictive design of bacterial production chassis.

Chemoenzymatic Synthesis of the Intermediates in the Peppermint Monoterpenoid Biosynthetic Pathway.

A chemoenzymatic approach providing access to all four intermediates in the peppermint biosynthetic pathway between limonene and menthone/isomenthone, including noncommercially available intermediates (-)- trans-isopiperitenol (2), (-)-isopiperitenone (3), and (+)- cis-isopulegone (4), is described. Oxidation of (+)-isopulegol (13) followed by enolate selenation and oxidative elimination steps provides (-)-isopiperitenone (3). A chemical reduction and separation route from (3) provides both native (-)- trans-isopiperitenol (2) and isomer (-)- cis-isopiperitenol (18), while enzymatic conjugate reduction of (-)-isopiperitenone (3) with IPR [(-)-isopiperitenone reductase)] provides (+)- cis-isopulegone (4). This undergoes facile base-mediated chemical epimerization to (+)-pulegone (5), which is subsequently shown to be a substrate for NtDBR ( Nicotiana tabacum double-bond reductase) to afford (-)-menthone (7) and (+)-isomenthone (8).

Engineering the "Missing Link" in Biosynthetic (-)-Menthol Production: Bacterial Isopulegone Isomerase.

The realization of a synthetic biology approach to microbial (1R,2S,5R)-(-)-menthol (1) production relies on the identification of a gene encoding an isopulegone isomerase (IPGI), the only enzyme in the Mentha piperita biosynthetic pathway as yet unidentified. We demonstrate that Δ5-3-ketosteroid isomerase (KSI) from Pseudomonas putida can act as an IPGI, producing (R)-(+)-pulegone ((R)-2) from (+)-cis-isopulegone (3). Using a robotics-driven semirational design strategy, we identified a key KSI variant encoding four active site mutations, which confer a 4.3-fold increase in activity over the wild-type enzyme. This was assisted by the generation of crystal structures of four KSI variants, combined with molecular modeling of 3 binding to identify key active site residue targets. The KSI variant was demonstrated to function efficiently within cascade biocatalytic reactions with downstream Mentha enzymes pulegone reductase and (-)-menthone:(-)-menthol reductase to generate 1 from 3. This study introduces the use of a recombinant IPGI, engineered to function efficiently within a biosynthetic pathway for the production of 1 in microorganisms.

Biocatalytic Routes to Lactone Monomers for Polymer Production.

Monoterpenoids offer potential as biocatalytically derived monomer feedstocks for high-performance renewable polymers. We describe a biocatalytic route to lactone monomers menthide and dihydrocarvide employing Baeyer-Villiger monooxygenases (BVMOs) from Pseudomonas sp. HI-70 (CPDMO) and Rhodococcus sp. Phi1 (CHMOPhi1) as an alternative to organic synthesis. The regioselectivity of dihydrocarvide isomer formation was controlled by site-directed mutagenesis of three key active site residues in CHMOPhi1. A combination of crystal structure determination, molecular dynamics simulations, and mechanistic modeling using density functional theory on a range of models provides insight into the origins of the discrimination of the wild type and a variant CHMOPhi1 for producing different regioisomers of the lactone product. Ring-opening polymerizations of the resultant lactones using mild metal-organic catalysts demonstrate their utility in polymer production. This semisynthetic approach utilizing a biocatalytic step, non-petroleum feedstocks, and mild polymerization catalysts allows access to known and also to previously unreported and potentially novel lactone monomers and polymers.