RESUMO
MgO ultrathin films are of great technological importance as electron tunneling barrier in electronics and spintronics, and as template for metallic clusters in catalysis and for molecular networks for 2D electronics. The wide band-gap of MgO allows for a very effective decoupling from the substrate. The films morphology and the detailed structure of the interface are crucial for applications, controlling the electronic transfer. Using surface x-ray diffraction, we studied the growth-mode and the structure of MgO/Ag(001) ultrathin films elaborated by reactive molecular beam epitaxy as function of the substrate temperature. We observed that deposition of about 1 monolayer results in an MgO(001) film in coherent epitaxy, with the oxygen atoms on top of silver as predicted by DFT calculations, and an interlayer distance at the interface of about 270 pm. Under well-defined conditions, a sharp MgO bilayer is formed covering a fraction of the substrate surface.
RESUMO
Surface X-ray diffraction has been employed to quantitatively determine the geometric structure of an X-ray-induced superhydrophilic rutile-TiO2(110)(1 × 1) surface. A scatterer, assumed to be oxygen, is found at a distance of 1.90 ± 0.02 Å above the five-fold-coordinated surface Ti atom, indicating surface hydroxylation. Two more oxygen atoms, situated further from the substrate, are also included to achieve the optimal agreement between experimental and simulated diffraction data. It is concluded that these latter scatterers are from water molecules, surface-localized through hydrogen bonding. Comparing this interfacial structure with previous studies suggests that the superhydophilicity of titania is most likely to be a result of the depletion of surface carbon contamination coupled to extensive surface hydroxylation.
RESUMO
The interaction of water with TiO2 is crucial to many of its practical applications, including photocatalytic water splitting. Following the first demonstration of this phenomenon 40 years ago there have been numerous studies of the rutile single-crystal TiO2(110) interface with water. This has provided an atomic-level understanding of the water-TiO2 interaction. However, nearly all of the previous studies of water/TiO2 interfaces involve water in the vapour phase. Here, we explore the interfacial structure between liquid water and a rutile TiO2(110) surface pre-characterized at the atomic level. Scanning tunnelling microscopy and surface X-ray diffraction are used to determine the structure, which is comprised of an ordered array of hydroxyl molecules with molecular water in the second layer. Static and dynamic density functional theory calculations suggest that a possible mechanism for formation of the hydroxyl overlayer involves the mixed adsorption of O2 and H2O on a partially defected surface. The quantitative structural properties derived here provide a basis with which to explore the atomistic properties and hence mechanisms involved in TiO2 photocatalysis.
RESUMO
Surface X-ray diffraction has been employed to elucidate the surface structure of α-Cr2O3(0001) as a function of water partial pressure at room temperature. In ultra high vacuum, following exposure to â¼2000 Langmuir of H2O, the surface is found to be terminated by a partially occupied double layer of chromium atoms. No evidence of adsorbed OH/H2O is found, which is likely due to either adsorption at minority sites, or X-ray induced desorption. At a water partial pressure of â¼30 mbar, a single OH/H2O species is found to be bound atop each surface Cr atom. This adsorption geometry does not agree with that predicted by ab initio calculations, which may be a result of some differences between the experimental conditions and those modeled.
RESUMO
Self-assembled monolayers of thiols on Au(111) have attracted considerable interest from the theoretical and experimental points of view as model systems for understanding the organization of molecules on metallic surfaces, and also as key elements in nanoscience and nanotechnology. Today, there is strong theoretical and experimental evidence indicating that the surface chemistry of these monolayers at high coverage involves dithiolate-adatom (RS-Auad-SR) species, showing the existence of the (3 × 4) and c(4 × 2) lattices usually observed by scanning tunneling microscopy. However, concealing the existence of dithiolate-Au adatom species with the presence of the paradigmatic (â3 × â3)R30° lattice, which dominates the structure of long alkanethiols, still remains a challenge. Here, we propose a novel (3â3 × 3â3)R30° structural model containing RS-Auad-SR moieties based on DFT calculations which reconciles most of the experimental data observed for the (â3 × â3)R30° lattice. Our results provide a unified picture of the surface chemistry of the thiol-Au(111) system.
RESUMO
Surface X-ray diffraction has been employed to elucidate the structure of the interface between a well-characterized (001) surface of 0.1 wt % Nb-SrTiO3 and liquid H2O. Results are reported for the clean surface, the surface in contact with a drop of liquid water, and the surface after the water droplet has been removed with a flow of nitrogen. The investigation revealed that the clean surface, prepared via annealing in 1 × 10-2 mbar O2 partial pressure, is unreconstructed and rough on a short length scale. The surface is covered with large terraces, the topmost layer of which is either TiO2 or SrO with an area ratio of about 7/3. For the surface in contact with water, our results reveal that associative H2O adsorption is favored for the TiO2-terminated terrace whereas adsorption is dissociative for the SrO-terminated terrace, which validates recent first-principles calculations. After removal of the water droplet, the surface largely resembles the water-covered surface but now with a disordered overlayer of water present on the surface.
RESUMO
Atomic engineering of perovskite films and interfaces is significantly improved by in situ optimization of reflection high-energy electron diffraction (RHEED) features resulting from surface BO6 octahedral rotations seen during molecular-beam epitaxy growth. This approach yields Sr-doped manganite films across the phase diagram with magnetotransport properties that are, for the first time, identical to bulk single crystals. Careful structural analysis of manganite/titanate interfaces shows that cation intermixing and unit cell dilations are eliminated, while BO6 rotations and Jahn-Teller-type elongations are nearly completely suppressed at the interface.
Assuntos
Compostos de Cálcio/química , Cristalização/métodos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Óxidos/química , Titânio/química , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Surface x-ray diffraction has been employed to elucidate the surface structure of the (011)-(2 x 1) termination of rutile TiO2. The data are inconsistent with previously proposed structures. Instead, an entirely unanticipated geometry emerges from the structure determination, which is terminated by zigzag rows of twofold coordinated oxygen atoms asymmetrically bonded to fivefold titanium atoms. The energetic stability of this structure is demonstrated by ab initio total energy calculations.
RESUMO
The c(4 x 2) structure of C16H33SH alkanethiol monolayers self-assembled on Au(111) has been studied by grazing incidence X-ray diffraction. This structure coexists on the surface with the (radical3x radical3)R30 degrees phase. The structural refinement of the c(4 x 2) phase has been accomplished by omitting the fractional order reflections common to both structures. The surface unit cell consists of four symmetry-independent molecules with atomic displacements related by couples, such that only two nonequivalent chains are present in the surface cell. The stability between neighbor chains is due to van der Waals interactions. The substrate plays an important and non-negligible role in the c(4 x 2) reconstruction. The lateral and normal substrate relaxations to the surface plane are small, and gold atom displacements are lower than 0.25 angstroms but contribute very strongly to the fractional order intensities. The molecular chains form a close packed structure tilted by 37 degrees from the surface normal with no indications of dimer formation between closest S atoms.
Assuntos
Ouro/química , Compostos de Sulfidrila/química , Modelos Moleculares , Tamanho da Partícula , Propriedades de Superfície , Difração de Raios X/métodosRESUMO
The oxidation of the Rh(111) surface at oxygen pressures from 10(-10) mbar to 0.5 bar and temperatures between 300 and 900 K has been studied on the atomic scale using a multimethod approach of experimental and theoretical techniques. Oxidation starts at the steps, resulting in a trilayer O-Rh-O surface oxide which, although not thermodynamically stable, prevents further oxidation at intermediate pressures. A thick corundum like Rh2O3 bulk oxide is formed only at significantly higher pressures and temperatures.
RESUMO
Sb induces on Ge(113) a c(2 x 2) reconstruction in which Sb breaks one Ge-Ge bond and occupies an interstitial site, in contrast to Sb adsorption on other Si or Ge surfaces. Sb saturates the three dangling bonds per unit cell of the (113) surface inducing a large strain which is released by occupation of the interstitial site. Two neighboring Sb at interstitial sites form a dimer. The structure has been determined by x-ray diffraction, applying direct methods, and ab initio density-functional-theory calculations. The adsorption geometry and the high binding energy lead one to expect that Sb cannot be used as a surfactant for the growth of Si/Ge layers on the (113) surface.
RESUMO
We present a structural determination of the surface reconstruction of the Sm(0001) surface using surface x-ray diffraction, scanning tunneling microscopy, and ab initio calculations. The reconstruction is associated with a large (22%) expansion of the atomic radius for the top monolayer surface Sm atoms. The mechanism driving the surface reconstruction in Sm is unique among all elements and is connected to the strong correlations of the 4f electrons in Sm and the intermediate valence observed in certain Sm compounds. The atoms constituting the top monolayer of Sm(0001) have vastly different chemical properties compared to the layer underneath and behave as if they were an adsorbate of a different chemical species.
RESUMO
The condensation reactions between (4-amino-2,6-dichlorophenyl)bis(2, 4,6-trichlorophenyl)methyl radical and acetylacetone or 1, 4-bis(5-methyl-2-thienyl)-1,4-butanedione yield [2,6-dichloro-4-(2, 5-dimethyl-1-pyrrolyl)phenyl]bis(2,4,6-trichlorophenyl)methyl radical (3(*)()) and [2,6-dichloro-4-[2, 5-bis(5-methyl-2-thienyl)-1-pyrrolyl]phenyl]bis(2,4, 6-trichlorophenyl)methyl radical (4(*)()), respectively. EPR studies of both radicals 3(*)() and 4(*)() in CH(2)Cl(2) solution suggest a weak electron delocalization with coupling constant values of 1.25 and 1.30 G, respectively, with the six aromatic hydrogens. Their electrochemical behavior was analyzed by cyclic voltammetry. Both radicals show reversible reduction processes at E degrees = -0.69 V and -0.61 V versus SSCE, respectively, and anodic peak potentials at E(p)(a) = 1.10 and 0.72 V, respectively, versus SSCE at a scan rate (nu) of 200 mV s(-)(1), being reversible for radical 4(*)(). X-ray analysis of radical 3(*)() shows a high value (65 degrees ) of the dihedral angle between the 2,5-dimethylpyrrolidyl moiety and the phenyl ring. Smooth oxidation of radical 4(*)() in CH(2)Cl(2) containing trifluoroacetic acid gives an ionic diradical species with a weak electron interaction (|D/hc| = 0.0047 cm(-)(1)). A Curie plot of the Deltam(s)() = +/-2 signal intensity versus the inverse of the absolute temperature in the range between 4 and 70 K suggests a triplet or a nearly degenerate singlet-triplet ground state.
RESUMO
Fullerene molecules absorbed on the highly anisotropic Au(110)-p(1x2) surface induce an ordered p(6x5) superstructure that has been solved by applying the 2D "direct methods" difference sum function to the surface x-ray diffraction data set. We found that the C (60)-gold interface is structurally much more complex than the one previously suggested by scanning tunneling microscopy data [J. K. Gimzewski, S. Modesti, and R. R. Schlittler, Phys. Rev. Lett. 72, 1036 (1994)]. Indeed a large fraction of Au surface atoms are displaced from their original positions producing microscopic pits that may accommodate the fullerene molecules.