Impact of nanotechnology on progress of flow methods in chemical analysis: A review.

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Flow-Injection Methods in Water Analysis-Recent Developments.

Widespread demand for the analysis and control of water quality and supply for human activity and ecosystem sustainability has necessitated the continuous improvement of water analysis methods in terms of their reliability, efficiency, and costs. To satisfy these requirements, flow-injection analysis using different detection methods has successfully been developed in recent decades. This review, based on about 100 original research papers, presents the achievements in this field over the past ten years. Various methodologies for establishing flow-injection measurements are reviewed, together with microfluidics and portable systems. The developed applications mostly concern not only the determination of inorganic analytes but also the speciation analysis of different elements, and the determination of several total indices of water quality. Examples of the determination of organic residues (e.g., pesticides, phenolic compounds, and surfactants) in natural surface waters, seawater, groundwater, and drinking water have also been identified. Usually, changes in the format of manual procedures for flow-injection determination results in the improvement of various operational parameters, such as the limits of detection, the sampling rate, or selectivity in different matrices.

High energy radiation - Induced cooperative reductive/oxidative mechanism of perfluorooctanoate anion (PFOA) decomposition in aqueous solution.

The mechanism of high-energy radiation induced degradation of perfluorooctanoate anion (PFOA, C7F15COO-) was investigated in aqueous solutions. Identification and quantification of transient species was performed by pulse radiolysis and of final products by gas and ion chromatography, electrochemical method using fluoride ion-selective electrode and ESI-MS after γ-radiolysis. Experimental data were further supported by kinetic simulations and quantum mechanical calculations. Radiation induced degradation of PFOA includes as a primary step one-electron reduction of PFOA by hydrated electrons (e-aq) resulting in formation of [C7F15COO-]●-. The rate constants of this reaction were found to be in the range 7.7 × 107-1.3 × 108 M-1s-1 for ionic strength of the solutions in the range 0.01-0.1 M and were independent of pH of the solutions. At pH > 11 [C7F15COO-]●- tends to defluorination whereas at lower pH undergoes protonation forming [C7F15COOH]•-. A sequence of consecutive reactions involving [C7F15COOH]•- leads to PFOA regeneration what explains a high radiation resistance of PFOA at moderately acidic solutions. A simultaneous presence of oxidizing transient species (●OH) in the irradiated system enhanced decomposition of (C7F14)·COO- as well as [C7F15COOH]•-. The key steps in this complex radical mechanism are the reactions of both these radical anions with ●OH leading to semi-stable products which further undergo consecutive thermal reactions. On the other hand, direct reactions of PFOA with ●OH and ●H were found to be relatively slow (7 × 103 and <4 × 107 M-1s-1, respectively) and do not play relevant role in PFOA degradation. Collected for the first time results, such as dependence of selected reaction rate constants and selected products radiation chemical yields on pH as well as finding of several semi-stable products, missing in previous studies, indicate incompleteness of published earlier reaction pathways of PFOA degradation. The presented overall mechanism explains experimental results and verifies previously suggested mechanisms found in the literature.

Application of Molecularly Imprinted Polymers in the Analysis of Waters and Wastewaters.

The increase of the global population and shortage of renewable water resources urges the development of possible remedies to improve the quality and reusability of waste and contaminated water supplies. Different water pollutants, such as heavy metals, dyes, pesticides, endocrine disrupting compounds (EDCs), and pharmaceuticals, are produced through continuous technical and industrial developments that are emerging with the increasing population. Molecularly imprinted polymers (MIPs) represent a class of synthetic receptors that can be produced from different types of polymerization reactions between a target template and functional monomer(s), having functional groups specifically interacting with the template; such interactions can be tailored according to the purpose of designing the polymer and based on the nature of the target compounds. The removal of the template using suitable knocking out agents renders a recognition cavity that can specifically rebind to the target template which is the main mechanism of the applicability of MIPs in electrochemical sensors and as solid phase extraction sorbents. MIPs have unique properties in terms of stability, selectivity, and resistance to acids and bases besides being of low cost and simple to prepare; thus, they are excellent materials to be used for water analysis. The current review represents the different applications of MIPs in the past five years for the detection of different classes of water and wastewater contaminants and possible approaches for future applications.

Application of Capillary Electrophoresis for Determination of Inorganic Analytes in Waters.

Aside from HPLC and GC, capillary electrophoresis (CE) is one of the most important techniques for high-performance separations in modern analytical chemistry. Its main advantages are the possibility of using different detection techniques, the possibility of in-capillary sample processing for preconcentration or derivatization, and ease of instrumental miniaturization down to the microfluidic scale. Those features are utilized in the separation of macromolecules in biochemistry and in genetic investigations, but they can be also used in determinations of inorganic ions in water analysis. This review, based on about 100 original research works, presents applications of CE methods in water analysis reported in recent decade, mostly regarding conductivity detection or indirect UV detection. The developed applications include analysis of high salinity sea waters, as well as analysis of other surface waters and drinking waters.

Flow Chemistry in Contemporary Chemical Sciences: A Real Variety of Its Applications.

Flow chemistry is an area of contemporary chemistry exploiting the hydrodynamic conditions of flowing liquids to provide particular environments for chemical reactions. These particular conditions of enhanced and strictly regulated transport of reagents, improved interface contacts, intensification of heat transfer, and safe operation with hazardous chemicals can be utilized in chemical synthesis, both for mechanization and automation of analytical procedures, and for the investigation of the kinetics of ultrafast reactions. Such methods are developed for more than half a century. In the field of chemical synthesis, they are used mostly in pharmaceutical chemistry for efficient syntheses of small amounts of active substances. In analytical chemistry, flow measuring systems are designed for environmental applications and industrial monitoring, as well as medical and pharmaceutical analysis, providing essential enhancement of the yield of analyses and precision of analytical determinations. The main concept of this review is to show the overlapping of development trends in the design of instrumentation and various ways of the utilization of specificity of chemical operations under flow conditions, especially for synthetic and analytical purposes, with a simultaneous presentation of the still rather limited correspondence between these two main areas of flow chemistry.

Removal of persistent organic pollutants (POPs) from waters and wastewaters by the use of ionizing radiation.

The most important advantages of the use of ionizing radiation over other AOPs are exceptionally efficient in situ generation of very reactive oxidizing free radicals •OH from water radiolysis and very unique simultaneous generation of strongly reducing hydrated electrons. They allow to carry out Advanced Oxidation and Reduction Processes (AO/RPs) simultaneously. Carrying out only oxidative or reductive processes is also possible by the use of appropriate scavengers of free radicals in irradiated solutions. For the application of these processes for environmental protection purposes gamma-rays from radioisotope sources or beams of accelerated electrons are most commonly used. In the case of particularly resistant POPs some chemical additives to the irradiated solutions may enhance the yield of decomposition. This review based on 125 references reported so far presents the applications of the discussed technology in removing POPs from waters and wastewaters, including pesticides listed among POPs, dioxins, polychlorinated biphenyls, polycyclic aromatic hydrocarbons and selected perfluorinated surfactants.

Application of new covalently-bound diglycolamide sorbent in sequential injection analysis flow system for sample pretreatment in ICP-MS determination of 239Pu at ppt level.

Diglycolamide ligands are widely applied in the analysis of radionuclides, especially lanthanides and actinides. They are used in liquid-liquid extraction procedures or in solid-phase extraction sorbents where they are adsorbed on the surface of hydrophobic polymers. The main objective of this study was to synthesize the N,N,N'N'-tetrahexyl diglycolamide with one vinyl terminating group (vTHDGA) for further covalent immobilization on the polystyrene-divinylbenzene polymeric support. The obtained complexing resin (THDGA) was employed for the mechanized sample pretreatment in the Sequential Injection Analysis - Lab-on-Valve (SIA-LOV) flow system for the determination of 239Pu using ICP-MS detection. The analytical procedure was optimized in terms of selectivity towards several other radionuclides and elements forming potentially isobaric interferences in mass spectrometry. For 100 mL volume of sample to be analyzed, the method detection limit (MDL) was 96 mBq L-1 (42 pg L-1). The developed method was employed for the determination of 239Pu in real samples of a nuclear reactor coolant and spent fuel pool water from a nuclear reactor.

Comparison of different advanced degradation processes for the removal of the pharmaceutical compounds diclofenac and carbamazepine from liquid solutions.

Carbamazepine and diclofenac are two examples of drugs with widespread geographical and environmental media proliferation that are poorly removed by traditional wastewater treatment processes. Advanced oxidation processes (AOPs) have been proposed as alternative methods to remove these compounds in solution. AOPs are based on a wide class of powerful technologies, including UV radiation, ozone, hydrogen peroxide, Fenton process, catalytic wet peroxide oxidation, heterogeneous photocatalysis, electrochemical oxidation and their combinations, sonolysis, and microwaves applicable to both water and wastewater. Moreover, processes rely on the production of oxidizing radicals (•OH and others) in a solution to decompose present pollutants. Water radiolysis-based processes, which are an alternative to the former, involve the use of concentrated energy (beams of accelerated electrons or γ-rays) to split water molecules, generating strong oxidants and reductants (radicals) at the same time. In this paper, the degradation of carbamazepine and diclofenac by means of all these processes is discussed and compared. Energy and byproduct generation issues are also addressed.

A comparison study on the use of Dowex 1 and TEVA-resin in determination of 99Tc in environmental and nuclear coolant samples in a SIA system with ICP-MS detection.

This work refers to a comparative study of sorbents widely used in determinations of 99Tc such as TEVA resin and Dowex 1. Despite having a similar functional group of quaternary amines, both materials represent different chromatographic methods-extraction (TEVA resin) and anion exchange (Dowex 1)-which provides a diverse range of their properties significant in determination of 99Tc in flow conditions. The comparative tests, carried out in a SIA-LOV (Sequential Injection Analysis-Lab-on-Valve) system combined with mass spectrometric (ICP-MS) detection, considered several factors that are crucial from the standpoint of resin´s utility such as sorption capacity, durability, or selectivity, critical in 99Tc separation from interferences. The developed and optimized analytical procedure based on the application of the TEVA resin provided determinations of 99Tc at minimum detectable limit (MDL) 6.00 mBq L-1 in 50 min and has been successfully employed in analyses of samples from nuclear industrial and research units (reactor coolant and sewage) as well as from the river surrounding the nuclear reactor. The method proved to be sufficient for routine analysis of water samples in accordance with EPA standards. The reliability of the method was confirmed in the analysis of the BH standard provided by the NPL for inter-laboratory proficiency tests. The 99Tc recovery for all real samples was evaluated as 80-100%.

A review of flow analysis methods for determination of radionuclides in nuclear wastes and nuclear reactor coolants.

The safety and security of nuclear power plant operations depend on the application of the most appropriate techniques and methods of chemical analysis, where modern flow analysis methods prevail. Nevertheless, the current status of the development of these methods is more limited than it might be expected based on their genuine advantages. The main aim of this paper is to review the automated flow analysis procedures developed with various detection methods for the nuclear energy industry. The flow analysis methods for the determination of radionuclides, that have been reported to date, are primarily focused on their environmental applications. The benefits of the application of flow methods in both monitoring of the nuclear wastes and process analysis of the primary circuit coolants of light water nuclear reactors will also be discussed. The application of either continuous flow methods (CFA) or injection methods (FIA, SIA) of the flow analysis with the ß-radiometric detection shortens the analysis time and improves the precision of determination due to mechanization of certain time-consuming operations of the sample processing. Compared to the radiometric detection, the mass spectrometry (MS) detection enables one to perform multicomponent analyses as well as the determination of transuranic isotopes with much better limits of detection.

A survey of analytical methods employed for monitoring of Advanced Oxidation/Reduction Processes for decomposition of selected perfluorinated environmental pollutants.

The monitoring of Advanced Oxidation/Reduction Processes (AO/RPs) for the evaluation of the yield and mechanisms of decomposition of perfluorinated compounds (PFCs) is often a more difficult task than their determination in the environmental, biological or food samples with complex matrices. This is mostly due to the formation of hundreds, or even thousands, of both intermediate and final products. The considered AO/RPs, involving free radical reactions, include photolytic and photocatalytic processes, Fenton reactions, sonolysis, ozonation, application of ionizing radiation and several wet oxidation processes. The main attention is paid to the most commonly occurring PFCs in the environment, namely PFOA and PFOS. The most powerful and widely exploited method for this purpose is without a doubt LC/MS/MS, which allows the identification and trace quantitation of all species with detectability and resolution power depending on the particular instrumental configurations. The GC/MS is often employed for the monitoring of volatile fluorocarbons, confirming the formation of radicals in the processes of C‒C and C‒S bonds cleavage. For the direct monitoring of radicals participating in the reactions of PFCs decomposition, the molecular spectrophotometry is employed, especially electron paramagnetic resonance (EPR). The UV/Vis spectrophotometry as a detection method is of special importance in the evaluation of kinetics of radical reactions with the use of pulse radiolysis methods. The most commonly employed for the determination of the yield of mineralization of PFCs is ion-chromatography, but there is also potentiometry with ion-selective electrode and the measurements of general parameters such as Total Organic Carbon and Total Organic Fluoride. The presented review is based on about 100 original papers published in both analytical and environmental journals.

Can radiation chemistry supply a highly efficient AO(R)P process for organics removal from drinking and waste water? A review.

The increasing role of chemistry in industrial production and its direct and indirect impacts in everyday life create the need for continuous search and efficiency improvement of new methods for decomposition/removal of different classes of waterborne anthropogenic pollutants. This review paper addresses a highly promising class of water treatment solutions, aimed at tackling the pressing problem of emerging contaminants in natural and drinking waters and wastewater discharges. Radiation processing, a technology originating from radiation chemistry studies, has shown encouraging results in the treatment of (mainly) organic water pollution. Radiation ("high energy") processing is an additive-free technology using short-lived reactive species formed by the radiolysis of water, both oxidative and reducing, to carry out decomposition of organic pollutants. The paper illustrates the basic principles of radiolytic treatment of organic pollutants in water and wastewaters and specifically of one of its most practical implementations (electron beam processing). Application examples, highlighting the technology's strong points and operational conditions are described, and a discussion on the possible future of this technology follows.

Automation of sample processing for ICP-MS determination of 90Sr radionuclide at ppq level for nuclear technology and environmental purposes.

90Sr is a widely determined radionuclide for environmental purposes, nuclear waste control, and can be also monitored in coolants in nuclear reactor plants. In the developed method, the ICP-MS detection was employed together with sample processing in sequential injection analysis (SIA) setup, equipped with a lab-on-valve with mechanized renewal of sorbent bed for solid-phase extraction. The optimized conditions of determination included preconcentration of 90Sr on cation-exchange column and removal of different type of interferences using extraction Sr-resin. The limit of detection of the developed procedure depends essentially on the configuration of the employed ICP-MS spectrometer and on the available volume of the sample to be analyzed. For 1L initial sample volume, the method detection limit (MDL) value was evaluated as 2.9ppq (14.5BqL-1). The developed method was applied to analyze spiked river water samples, water reference materials, and also simulated and real samples of the nuclear reactor coolant.

A feasibility study of UHPLC-HRMS accurate-mass screening methods for multiclass testing of organic contaminants in food.

The feasibility of accurate-mass multi-residue screening methods using liquid chromatography high-resolution mass spectrometry (UHPLC-HRMS) using time-of-flight mass spectrometry has been evaluated, including over 625 multiclass food contaminants as case study. Aspects such as the selectivity and confirmation capability provided by HRMS with different acquisition modes (full-scan or full-scan combined with collision induced dissociation (CID) with no precursor ion isolation), and chromatographic separation along with main limitations such as sensitivity or automated data processing have been examined. Compound identification was accomplished with retention time matching and accurate mass measurements of the targeted ions for each analyte (mainly (de)protonated molecules). Compounds with the same nominal mass (isobaric species) were very frequent due to the large number of compounds included. Although 76% of database compounds were involved in isobaric groups, they were resolved in most cases (99% of these isobaric species were distinguished by retention time, resolving power, isotopic profile or fragment ions). Only three pairs could not be resolved with these tools. In-source CID fragmentation was evaluated in depth, although the results obtained in terms of information provided were not as thorough as those obtained using fragmentation experiments without precursor ion isolation (all ion mode). The latter acquisition mode was found to be the best suited for this type of large-scale screening method instead of classic product ion scan, as provided excellent fragmentation information for confirmatory purposes for an unlimited number of compounds. Leaving aside the sample treatment limitations, the main weaknesses noticed are basically the relatively low sensitivity for compounds which does not map well against electrospray ionization and also quantitation issues such as those produced by signal suppression due to either matrix effects from coeluting matrix or from coeluting analytes present in the standards solutions which often occur as they contain hundreds of the analytes included in the screening methods.

Towards a semiquantitative non invasive characterisation of Tyrian purple dye composition: Convergence of UV-Visible reflectance spectroscopy and fast-high temperature-high performance liquid chromatography with photodiode array detection.

In this paper, partial least square (PLS) regression is innovatively applied for a semi-quantitative non invasive study of the most precious dye of Antiquity: Tyrian purple. This original approach for the study of organic dyes in the cultural heritage field, is based on the correlation of spectrophotometric (UV-Visible) and chromatographic (Fast-HT-HPLC-PDA) data from an extensive set of textiles prepared with different snail species according to historical recipes. A cross-validated PLS model, based on the quantity of 6,6'-dibromoindigotin, displays an excellent correlation factor (R(2)Y = 0.987) between values determined by chromatography and those predicted from reflectance spectra. This indicates that the spectral features of Tyrian purple on textile fibre is strictly related to the amount of this indigoid component whose content may be non invasively predicted from reflectance spectrum. The studied correlation also highlights that, independently of the dyeing method and nature of the textile fibre used, the relative content of 6,6'-dibromindigotin may be used as a parameter to distinguish samples prepared with Hexaplex trunculus L. snails from those prepared with further mollusc species. To validate this model, archaeological textile fragments dating from the Roman period were successfully examined. The results achieved open an absolutely new way in Tyrian purple analysis in cultural heritage by non invasive spectroscopic techniques attesting their convergence with HPLC and giving them a semi-quantitative value.

Recent advances in flow injection analysis.

A dynamic development of methodologies of analytical flow injection measurements during four decades since their invention has reinforced the solid position of flow analysis in the arsenal of techniques and instrumentation of contemporary chemical analysis. With the number of published scientific papers exceeding 20,000, and advanced instrumentation available for environmental, food, and pharmaceutical analysis, flow analysis is well established as an extremely vital field of modern flow chemistry, which is developed simultaneously with methods of chemical synthesis carried out under flow conditions. This review work is based on almost 300 original papers published mostly in the last decade, with special emphasis put on presenting novel achievements from the most recent 2-3 years in order to indicate current development trends of this methodology. Besides the evolution of the design of whole measuring systems, and including especially new applications of various detections methods, several aspects of implications of progress in nanotechnology, and miniaturization of measuring systems for application in different field of modern chemical analysis are also discussed.

Flow chemistry vs. flow analysis.

The flow mode of conducting chemical syntheses facilitates chemical processes through the use of on-line analytical monitoring of occurring reactions, the application of solid-supported reagents to minimize downstream processing and computerized control systems to perform multi-step sequences. They are exactly the same attributes as those of flow analysis, which has solid place in modern analytical chemistry in several last decades. The following review paper, based on 131 references to original papers as well as pre-selected reviews, presents basic aspects, selected instrumental achievements and developmental directions of a rapidly growing field of continuous flow chemical synthesis. Interestingly, many of them might be potentially employed in the development of new methods in flow analysis too. In this paper, examples of application of flow analytical measurements for on-line monitoring of flow syntheses have been indicated and perspectives for a wider application of real-time analytical measurements have been discussed.

Application of flow analysis in determination of selected radionuclides.

The subject of this article is the review of developed applications of flow analysis methods for determination of radionuclides hard-to-detect in reactor cooling waters ((90)Sr, (239,240)Pu, and (241)Am), and also (99)Tc, which are released to the environment primarily through nuclear fuel processing. Flow analysis, which developed for decades parallel to flow methods of chemical synthesis, is widely employed in modern chemical analysis, mainly for environmental, food analysis and pharmaceutical applications. It allows the simplification of design of analytical instruments and procedures, the shortening of analysis time, improvement of precision, and often the automation of whole analytical procedure. All those factors can be also advantageous for determination of critical radionuclides for process needs and protection of environment. The review is based on 84 references, published mainly in leading analytical journals.

Flow methods in chiral analysis.

The methods used for the separation and analytical determination of individual isomers are based on interactions with substances exhibiting optical activity. The currently used methods for the analysis of optically active compounds are primarily high-performance separation methods, such as gas and liquid chromatography using chiral stationary phases or chiral selectors in the mobile phase, and highly efficient electromigration techniques, such as capillary electrophoresis using chiral selectors. Chemical sensors and biosensors may also be designed for the analysis of optically active compounds. As enantiomers of the same compound are characterised by almost identical physico-chemical properties, their differentiation/separation in one-step unit operation in steady-state or dynamic flow systems requires the use of highly effective chiral selectors. Examples of such determinations are reviewed in this paper, based on 105 references. The greatest successes for isomer determination involve immunochemical interactions, enantioselectivity of the enzymatic biocatalytic processes, and interactions with ion-channel receptors or molecularly imprinted polymers. Conducting such processes under dynamic flow conditions may significantly enhance the differences in the kinetics of such processes, leading to greater differences in the signals recorded for enantiomers. Such determinations in flow conditions are effectively performed using surface-plasmon resonance and piezoelectric detections, as well as using common spectroscopic and electrochemical detections.