RESUMO
Acupuncture manipulation with needling direction is important for the therapeutic effect based on traditional Chinese medicine theory. However, there is controversy over directional manipulation and therapeutic effect, despite some research showing that acupuncture manipulations may have something to do with therapeutic effect. Moreover, research usually focuses on the therapeutic effects on the acupoints and acupuncture time rather than exploring the manipulation method. This study applies a semiconductor analyzer to investigate the effects of acupuncture manipulation. 10 healthy participants were recruited for the study. We used a cross-over design to compare the effect of different manipulation on individuals. This study employed an Agilent B1500A semiconductor analyzer to investigate the electric characteristics of meridians under directional supplementation and draining manipulation. We measured the electric current of meridians under different manipulation, and compared the difference between supplementation and draining manipulation in healthy individuals. The electric current was significantly larger in supplementation manipulation compared to draining manipulation in the meridians (P < .001). The measured electric current in the same manipulation methods did not show a statistical difference between meridians (P = .094). The different directional manipulation result in different electric currents in humans. Our finding implies that the supplementation and draining manipulation may result in different therapeutic effects clinically as the description of traditional Chinese medicine theory. Therefore, directional manipulation may need to be taken into consideration in future acupuncture studies and clinical management.
Assuntos
Terapia por Acupuntura , Meridianos , Pontos de Acupuntura , Terapia por Acupuntura/métodos , Humanos , Medicina Tradicional Chinesa/métodos , AgulhasRESUMO
Meridians constitute the theoretical foundation of acupuncture in traditional Chinese medicine (TCM), and they have been described for 2000 years. Classical TCM advocates for the directionality of meridians. Finding an accurate method to verify this directionality is an important goal of TCM doctors and researchers. In this study, we objectively explored the physical properties of meridians, such as response current from electrical stimulation, to explore their directionality. The Agilent B1500A semiconductor measurement analyzer was utilized to input the alternating current waveforms and detect the response current on the meridians. The results showed that the direction of the meridians influences the intensity of the response current. Therefore, the mechanisms behind the directions of ion transportation and the meridians were investigated using the response time and the intensity of the response current. Thereafter, we propose a model to explain this mechanism. Afterward, a comparison between the direction of the meridian in this experiment and ancient Chinese medicine classics was performed.
RESUMO
In this study, we have investigated the improvements in the performance of an all-solid-state complementary electrochromic device (ECD) by using the proposed high pressure treatment (HPT). The Li:Ta2O5electrolyte layer was recrystallized by the HPT utilizing pressurized CO2gas (â¼200 atm) and at low temperature (<60 °C), which enhanced the coloration performance of the WO3/Li:Ta2O5/NiO complementary ECD by â¼20%. The reliability and durability of the ECD were confirmed by long term transmittance retention measurements, which indicated an improvement in the coloration performance by â¼14% upon the release of the bias voltages. The ability of the devices that were fabricated with and without the HPT process to withstand high temperature environments was also verified. In addition, photoluminescence (PL) and transmittance measurements were carried out to examine the effects of the bonding between WO3and NiO. To determine the differences in lithium-ion (Li+) injection, electrical measurements were performed by utilizing varying pulse rising speeds to confirm device characteristics. The materials were characterized in terms of their composition and structure using high-resolution transmission electron microscopy along with energy-dispersive x-ray spectroscopy. Finally, a mechanistic model has been proposed to explain the improved EC characteristics based on the amorphous to crystalline transition accompanying the HPT process.
RESUMO
Acupuncture and its meridians are important components of traditional Chinese medicine, and numerous opinions have been previously expressed regarding these meridians. This study aims to explore the phenomenon of meridians from the perspective of electronic physics by studying these meridians for the response current affected by electrical pulse and acupuncture. In this study, acupuncture which applies an electrical pulse was used to research the physical properties of the meridians. Different kinds of pulses were applied to the human body to realize abnormal electrical signals. Comparing these electrical measurement results with the isothermal transient ionic current (ITIC) theory, we found that the transmission of meridian messages may be related to ion conduction. The movement of ions induced by acupuncture and electrical stimulation can lead to drift and diffusion currents through the meridians. The ionic conduction of meridian hypothesis is proved in that the substances delivered by meridians are in fact ions.
RESUMO
In this work, a high-density hydrogen (HDH) treatment is proposed to reduce interface traps and enhance the efficiency of the passivated emitter rear contact (PERC) device. The hydrogen gas is compressed at pressure (~ 70 atm) and relatively low temperature (~ 200 °C) to reduce interface traps without changing any other part of the device's original fabrication process. Fourier-transform infrared spectroscopy (FTIR) confirmed the enhancement of Si-H bonding and secondary-ion mass spectrometry (SIMS) confirmed the SiN/Si interface traps after the HDH treatment. In addition, electrical measurements of conductance-voltage are measured and extracted to verify the interface trap density (Dit). Moreover, short circuit current density (Jsc), series resistance (Rs), and fill factor (F.F.) are analyzed with a simulated light source of 1 kW M-2 global AM1.5 spectrum to confirm the increase in cell efficiency. External quantum efficiency (EQE) is also measured to confirm the enhancement in conversion efficiency between different wavelengths. Finally, a model is proposed to explain the experimental result before and after the treatment.
RESUMO
In this study, the hopping conduction distance and bipolar switching properties of the Gd:SiOx thin film by (radio frequency, rf) rf sputtering technology for applications in RRAM devices were calculated and investigated. To discuss and verify the electrical switching mechanism in various different constant compliance currents, the typical current versus applied voltage (I-V) characteristics of gadolinium oxide RRAM devices was transferred and fitted. Finally, the transmission electrons' switching behavior between the TiN bottom electrode and Pt top electrode in the initial metallic filament forming process of the gadolinium oxide thin film RRAM devices for low resistance state (LRS)/high resistance state (HRS) was described and explained in a simulated physical diagram model.
RESUMO
This study proposes a method for a HfO2-based device to exhibit both resistive switching (RS) characteristics as resistive random access memory (RRAM) and selector characteristics by introducing vanadium (V) as the top electrode. This simple V/HfO2/TiN structure can demonstrate these two different properties depending on forming polarities. The RS mechanism is activated by a positive forming bias. In contrast, the selector property is induced by a negative forming bias. The material analyses firstly confirm the existence of V in the top electrode. Then the electrical measurements for the same V/HfO2/TiN structures but with different forming polarities were carried out to further investigate their DC sweeping characteristics to act as either a selector or RRAM device. Furthermore, reliability tests for both selector and RRAM devices were also conducted to confirm their switching stabilities. Finally, current fitting methods and temperature influence experiments were performed to investigate the carrier transport mechanisms. Finally, physical models were proposed to illustrate the selector property and RS mechanism for selector and RRAM devices, respectively. This simple device structure with its easy operating method accomplishes a significant advancement of devices combining both selector properties and RRAM for remarkable real applications in the near future.
RESUMO
In this study, an O2 inductively coupled plasma (ICP) treatment was developed in order to modify the characteristics of indium tin oxide (ITO) film for use as an insulator in resistive random access memory (RRAM). After the O2 plasma treatment, the previously conductive ITO film is oxidized and becomes less conductive. In addition, after capping the same ITO material for use as a top electrode, we found that the ITO/ITO(O2 plasma)/TiN device exhibits very stable and robust resistive switching characteristics. On the contrary, the nontreated ITO film for use as an insulator in the ITO/ITO/TiN device cannot perform resistance switching behaviors. The material analysis initially investigated the ITO film characteristics with and without O2 plasma treatment. The surface was less rough after O2 plasma treatment. However, the molar concentration of each element and measured sheet resistance results for the O2-plasma-treated ITO film were dramatically modified. Next, electrical measurements were carried out to examine the resistance switching stability under continuous DC and AC operation in this ITO/ITO(O2 plasma)/TiN device. Reliability tests, including endurance and retention, also proved its capability for use in data storage applications. In addition to these electrical measurements, current fitting method experiments at different temperatures were performed to examine and confirm the resistance switching mechanisms. This easily fabricated device, using a simple material combination, achieves excellent performance by using ITO with an O2 plasma treatment and can further the abilities of RRAM for use in remarkable potential applications.
RESUMO
In this letter, we propose a novel low-temperature nitridation technology on a tantalum nitride (TaN) thin film resistor (TFR) through supercritical carbon dioxide (SCCO2) treatment for temperature sensor applications. We also found that the sensitivity of temperature of the TaN TFR was improved about 10.2 %, which can be demonstrated from measurement of temperature coefficient of resistance (TCR). In order to understand the mechanism of SCCO2 nitridation on the TaN TFR, the carrier conduction mechanism of the device was analyzed through current fitting. The current conduction mechanism of the TaN TFR changes from hopping to a Schottky emission after the low-temperature SCCO2 nitridation treatment. A model of vacancy passivation in TaN grains with nitrogen and by SCCO2 nitridation treatment is eventually proposed to increase the isolation ability in TaN TFR, which causes the transfer of current conduction mechanisms.
RESUMO
To discuss the optoelectronic effect on resistive random access memory (RRAM) devices, the bipolar switching properties and electron-hole pair generation behavior in the transparent indium tin oxide (ITO) electrode of Gd:SiO2 thin films under the ultraviolet (λ = 400 nm) and red-light (λ = 770 nm) illumination for high resistance state (HRS)/low resistance state (LRS) was observed and investigated. In dark environment, the Gd:SiO2 RRAM devices exhibited the ohmic conduction mechanism for LRS, exhibited the Schottky emission conduction and Poole-Frankel conduction mechanism for HRS. For light illumination effect, the operation current of the Gd:SiO2 RRAM devices for HRS/LRS was slightly increased. Finally, the electron-hole pair transport mechanism, switching conduction diagram, and energy band of the RRAM devices will be clearly demonstrated and explained.
RESUMO
Hydrogenation is one of the effective methods for improving the performance of ZnO thin film transistors (TFTs), which originate from the fact that hydrogen (H) acts as a defect passivator and a shallow n-type dopant in ZnO materials. However, passivation accompanied by an excessive H doping of the channel region of a ZnO TFT is undesirable because high carrier density leads to negative threshold voltages. Herein, we report that Mg/H codoping could overcome the trade-off between performance and reliability in the ZnO TFTs. The theoretical calculation suggests that the incorporation of Mg in hydrogenated ZnO decrease the formation energy of interstitial H and increase formation energy of O-vacancy (VO). The experimental results demonstrate that the existence of the diluted Mg in hydrogenated ZnO TFTs could be sufficient to boost up mobility from 10 to 32.2 cm(2)/(V s) at a low carrier density (â¼2.0 × 10(18) cm(-3)), which can be attributed to the decreased electron effective mass by surface band bending. The all results verified that the Mg/H codoping can significantly passivate the VO to improve device reliability and enhance mobility. Thus, this finding clearly points the way to realize high-performance metal oxide TFTs for low-cost, large-volume, flexible electronics.
RESUMO
Bipolar switching resistance behaviors of the Gd:SiO2 resistive random access memory (RRAM) devices on indium tin oxide electrode by the low-temperature supercritical CO2-treated technology were investigated. For physical and electrical measurement results obtained, the improvement on oxygen qualities, properties of indium tin oxide electrode, and operation current of the Gd:SiO2 RRAM devices were also observed. In addition, the initial metallic filament-forming model analyses and conduction transferred mechanism in switching resistance properties of the RRAM devices were verified and explained. Finally, the electrical reliability and retention properties of the Gd:SiO2 RRAM devices for low-resistance state (LRS)/high-resistance state (HRS) in different switching cycles were also measured for applications in nonvolatile random memory devices.
RESUMO
In this review, we provide an overview of our work in resistive switching mechanisms on oxide-based resistance random access memory (RRAM) devices. Based on the investigation of physical and chemical mechanisms, we focus on its materials, device structures, and treatment methods so as to provide an in-depth perspective of state-of-the-art oxide-based RRAM. The critical voltage and constant reaction energy properties were found, which can be used to prospectively modulate voltage and operation time to control RRAM device working performance and forecast material composition. The quantized switching phenomena in RRAM devices were demonstrated at ultra-cryogenic temperature (4K), which is attributed to the atomic-level reaction in metallic filament. In the aspect of chemical mechanisms, we use the Coulomb Faraday theorem to investigate the chemical reaction equations of RRAM for the first time. We can clearly observe that the first-order reaction series is the basis for chemical reaction during reset process in the study. Furthermore, the activation energy of chemical reactions can be extracted by changing temperature during the reset process, from which the oxygen ion reaction process can be found in the RRAM device. As for its materials, silicon oxide is compatible to semiconductor fabrication lines. It is especially promising for the silicon oxide-doped metal technology to be introduced into the industry. Based on that, double-ended graphene oxide-doped silicon oxide based via-structure RRAM with filament self-aligning formation, and self-current limiting operation ability is demonstrated. The outstanding device characteristics are attributed to the oxidation and reduction of graphene oxide flakes formed during the sputter process. Besides, we have also adopted a new concept of supercritical CO2 fluid treatment to efficiently reduce the operation current of RRAM devices for portable electronic applications.
RESUMO
In this letter, we utilize an electrical analysis method to develop a TaN thin film resistor with a stricter spec and near-zero temperature coefficient of resistance (TCR) for car-used electronic applications. Simultaneously, we also propose a physical mechanism mode to explain the origin of near-zero TCR for the TaN thin film resistor (TFR). Through current fitting, the carrier conduction mechanism of the TaN TFR changes from hopping to surface scattering and finally to ohmic conduction for different TaN TFRs with different TaN microstructures. Experimental data of current-voltage measurement under successive increasing temperature confirm the conduction mechanism transition. A model of TaN grain boundary isolation ability is eventually proposed to influence the carrier transport in the TaN thin film resistor, which causes different current conduction mechanisms.
RESUMO
We investigated the bipolar resistive switching characteristics of the resistive random access memory (RRAM) device with amorphous carbon layer. Applying a forming voltage, the amorphous carbon layer was carbonized to form a conjugation double bond conductive filament. We proposed a hydrogen redox model to clarify the resistive switch mechanism of high/low resistance states (HRS/LRS) in carbon RRAM. The electrical conduction mechanism of LRS is attributed to conductive sp2 carbon filament with conjugation double bonds by dehydrogenation, while the electrical conduction of HRS resulted from the formation of insulating sp3-type carbon filament through hydrogenation process.
RESUMO
We report on a highly compact, one diode-one resistor (1D-1R) nanopillar device architecture for SiOx-based ReRAM fabricated using nanosphere lithography (NSL). The intrinsic SiOx-based resistive switching element and Si diode are self-aligned on an epitaxial silicon wafer using NSL and a deep-Si-etch process without conventional photolithography. AC-pulse response in 50 ns regime, multibit operation, and good reliability are demonstrated. The NSL process provides a fast and economical approach to large-scale patterning of high-density 1D-1R ReRAM with good potential for use in future applications.
RESUMO
To improve the operation current lowing of the Zr:SiO2 RRAM devices, a space electric field concentrated effect established by the porous SiO2 buffer layer was investigated and found in this study. The resistive switching properties of the low-resistance state (LRS) and high-resistance state (HRS) in resistive random access memory (RRAM) devices for the single-layer Zr:SiO2 and bilayer Zr:SiO2/porous SiO2 thin films were analyzed and discussed. In addition, the original space charge limited current (SCLC) conduction mechanism in LRS and HRS of the RRAM devices using bilayer Zr:SiO2/porous SiO2 thin films was found. Finally, a space electric field concentrated effect in the bilayer Zr:SiO2/porous SiO2 RRAM devices was also explained and verified by the COMSOL Multiphysics simulation model.
RESUMO
In this letter, a double active layer (Zr:SiOx/C:SiOx) resistive switching memory device with outstanding performance is presented. Through current fitting, hopping conduction mechanism is found in both high-resistance state (HRS) and low-resistance state (LRS) of double active layer RRAM devices. By analyzing Raman and FTIR spectra, we observed that graphene oxide exists in C:SiOx layer. Compared with single Zr:SiOx layer structure, Zr:SiOx/C:SiOx structure has superior performance, including low operating current, improved uniformity in both set and reset processes, and satisfactory endurance characteristics, all of which are attributed to the double-layer structure and the existence of graphene oxide flakes formed by the sputter process.
RESUMO
BACKGROUND: The association of a seborrheic keratosis with other common cutaneous neoplasms such as basal cell carcinoma and Bowen disease has been reported, but the association between a seborrheic keratotis and a malignant neoplasm with sebaceous differentiation is very unusual. OBJECTIVE: We present a case of two contiguous neoplasms, a seborrheic keratosis and a sebaceous carcinoma, and discuss the possibility of malignant change in a seborrheic keratosis as an explanation for the findings. METHODS AND RESULTS: A 57-year-old man presented with an asymptomatic tumor on the skin of his abdomen that was composed of two separate but contiguous lesions. The central lesion, about 0.9 cm in diameter, was nodular, irregular, and reddish and was surrounded by a blackish lesion about 3 cm in greatest dimension. Histopathologic examination revealed that the plaque was composed of two different adjacent tumors, including a central portion showing findings consistent with a sebaceous carcinoma and a peripheral part showing a seborrheic keratosis. CONCLUSION: Although the association is likely to be a coincidence and probably represents a collision tumor, the possibility that the sebaceous carcinoma represents malignant degeneration of the seborrheic keratosis cannot be entirely excluded.