Introducing Cationic Selenium-Containing Triazapentadiene Ligand Framework: Synthesis, Coordination Chemistry, and Antifungal Activity.

Positively charged ligands are scarce. Here, we report the synthesis of unprecedented cationic selenium-containing triazapentadiene ligand framework. The reaction between 2-pyridylselenyl reagents and NaN(CN)2 in a 2:1 ratio produces the sodium complexes featuring the cationic selenium-containing triazapentadiene (SeTAP) ligand. The sodium-to-metal transmetalation allows facile preparation of SeTAP metal complexes, as exemplified by the reactions with CuCl2, AgNO3, NaAuCl4, and FeCl3. Density functional theory calculations have been used to analyze and characterize the chalcogen bonding interactions observed in the solid state for these compounds. Moreover, antifungal properties of the SeTAP ligand and its metal complexes were screened for in vitro activity against several phytopathogenic fungi. Phoma eupyrena exhibited prominent sensitivity against the action of most of the tested compounds.

Halogen Bond-Assisted Supramolecular Dimerization of Pyridinium-Fused 1,2,4-Selenadiazoles via Four-Center Se2N2 Chalcogen Bonding.

The synthesis and structural characterization of α-haloalkyl-substituted pyridinium-fused 1,2,4-selenadiazoles with various counterions is reported herein, demonstrating a strategy for directed supramolecular dimerization in the solid state. The compounds were obtained through a recently discovered 1,3-dipolar cycloaddition reaction between nitriles and bifunctional 2-pyridylselenyl reagents, and their structures were confirmed by the X-ray crystallography. α-Haloalkyl-substituted pyridinium-fused 1,2,4-selenadiazoles exclusively formed supramolecular dimers via four-center Se···N chalcogen bonding, supported by additional halogen bonding involving α-haloalkyl substituents. The introduction of halogens at the α-position of the substituent R in the selenadiazole core proved effective in promoting supramolecular dimerization, which was unaffected by variation of counterions. Additionally, the impact of cocrystallization with a classical halogen bond donor C6F3I3 on the supramolecular assembly was investigated. Non-covalent interactions were studied using density functional theory calculations and topological analysis of the electron density distribution, which indicated that all ChB, XB and HB interactions are purely non-covalent and attractive in nature. This study underscores the potential of halogen and chalcogen bonding in directing the self-assembly of functional supramolecular materials employing 1,2,4-selenadiazoles derived from recently discovered cycloaddition between nitriles and bifunctional 2-pyridylselenyl reagents.

Synthesis and crystal structure of the adduct between 2-pyridyl-selenyl chloride and isobutyro-nitrile.

The reaction between 2-pyridyl-selenenyl chloride and isobutyro-nitrile results in the formation of the corresponding cationic pyridinium-fused 1,2,4-seleno-diazole, namely, 3-(propan-2-yl)-1,2,4-[1,2,4]selena-diazolo[4,5-a]pyridin-4-ylium chloride, C9H11N2Se+·Cl-, in high yield (89%). The structure of the compound, established by means of single-crystal X-ray analysis at 100 K, has monoclinic (P21/c) symmetry and revealed the presence of bifurcated chalcogen-hydrogen bonding Se⋯Cl-⋯H-Cl, and these non-covalent contacts were analysed by DFT calculations followed by a topological analysis of the electron-density distribution (ωB97XD/6-311++G** level of theory).

Rhodamine B-Containing Chitosan-Based Films: Preparation, Luminescent, Antibacterial, and Antioxidant Properties.

In this study, Rhodamine B-containing chitosan-based films were prepared and characterized using their mechanical, photophysical, and antibacterial properties. The films were synthesized using the casting method and their mechanical properties, such as tensile strength and elongation at break, were found to be dependent on the chemical composition and drying process. Infrared spectroscopy and X-ray diffraction analysis were used to examine the chemical structure and degree of structural perfection of the films. The photophysical properties of the films, including absorption spectra, fluorescence detection, emission quantum yields, and lifetimes of excited states, were studied in detail. Rhodamine B-containing films exhibited higher temperature sensitivity and showed potential as fluorescent temperature sensors in the physiological range. The antibacterial activity of the films was tested against Gram-positive bacteria S. aureus and Gram-negative bacteria E. coli, with Rhodamine B-containing films demonstrating more pronounced antibacterial activity compared to blank films. The findings suggest that the elaborated chitosan-based films, particularly those containing Rhodamine B can be of interest for further research regarding their application in various fields such as clinical practice, the food industry, and agriculture due to their mechanical, photophysical, and antibacterial properties.

Characteristic features of toxic metal content in hair samples of foreign students at RUDN University from different geographic regions.

BACKGROUND: This study explores the regional variations in toxic metal accumulation among RUDN University students from various global regions. METHODS: This comparative analysis examined hair samples from students hailing from different regions, including Russia, Asia, the Middle East, Africa, and Latin America. The concentrations of Aluminium (Al), Arsenic (As), Cadmium (Cd), Mercury (Hg), Lead (Pb), and Tin (Sn) were measured in the hair samples. The data was then evaluated using regression models to assess the link between the region of residence and toxic metal content in the hair. RESULTS: The analysis indicated significant regional variations in the levels of toxic metals in the students' hair. The highest content of Al, Cd, and Pb was observed in students from Africa (13.542, 0.028, 0.794 µg/g) and Latin America (9.947, 0.025, 0.435 µg/g). Arsenic levels in students from all regions exceeded that of Russian students by over two-fold. No substantial group differences were found in the Sn content. The regression models suggested that residing in Asia, Africa, and Latin America was a predictor of high Hg levels in hair (0.130, 0.096, 0.227 µg/g). Living in Africa was significantly associated with higher Pb levels (0.794 µg/g), and living in Latin America was close to significantly associated with the Cd level in the hair (0.025 µg/g). CONCLUSION: This study confirmed an increased accumulation of toxic metals, especially Hg, Cd, and Pb, in students primarily from Latin America and Africa. The findings highlighted the importance of understanding the regional variations in toxic metal accumulation to address associated health risks and the potential impact on students' well-being and academic performance. These insights may guide the development of targeted interventions to reduce exposure to toxic metals in students from various regions around the world.

Chitosan and Its Derivatives: Preparation and Antibacterial Properties.

This comprehensive review illuminates the various methods of chitosan extraction, its antibacterial properties, and its multifarious applications in diverse sectors. We delve into chemical, physical, biological, hybrid, and green extraction techniques, each of which presents unique advantages and disadvantages. The choice of method is dictated by multiple variables, including the desired properties of chitosan, resource availability, cost, and environmental footprint. We explore the intricate relationship between chitosan's antibacterial activity and its properties, such as cationic density, molecular weight, water solubility, and pH. Furthermore, we spotlight the burgeoning applications of chitosan-based materials like films, nanoparticles, nonwoven materials, and hydrogels across the food, biomedical, and agricultural sectors. The review concludes by highlighting the promising future of chitosan, underpinned by technological advancements and growing sustainability consciousness. However, the critical challenges of optimizing chitosan's production for sustainability and efficiency remain to be tackled.

Benzothiazole Derivatives of Chitosan and Their Derived Nanoparticles: Synthesis and In Vitro and In Vivo Antibacterial Effects.

In this work, we focused on synthesizing and assessing novel chitosan-based antibacterial polymers and their nanoparticles by incorporating benzothiazole substituents. The growing resistance to antibiotics has necessitated the search for alternative antimicrobial compounds. This study aimed to synthesize and evaluate chitosan-based polymers and nanoparticles with benzothiazole substituents for their antibacterial properties and toxicity. The benzothiazole derivatives of chitosan and their nanoparticles were synthesized through electrochemical coupling. The in vivo antibacterial efficacy was tested on white rats with induced peritonitis using a microbial suspension containing S. aureus and E. coli. Additionally, in vitro and in vivo toxicity assessments were conducted. The chitosan-based antibacterial systems showed significant in vivo antibacterial activity, surpassing that of unmodified chitosan and commercial antibiotics. Moreover, the toxicity studies revealed low toxicity levels of the synthesized derivatives, which did not differ significantly from native chitosan. The synthesized chitosan-based polymers and nanoparticles demonstrated potent antibacterial activity and low toxicity, highlighting their potential as effective alternatives to traditional antibiotics. Further investigations in pharmacology and preclinical trials are recommended to explore their application in clinical settings.

Azo Coupling of Indoles Revisited: Synthesis of Biindolyl Photoswitches via the Azo-Coupling/C-H Functionalization Domino Approach.

When azo coupling of aryldiazonium salts with indoles was carried out in aprotic nonpolar solvent on air, a pseudo-three-component reaction has been discovered. Azo coupling is followed by a nucleophilic addition of a second indole unit to the indolium intermediate; aromatization and oxidation are achieved under air.

Chitosan-Based Antibacterial Films for Biomedical and Food Applications.

Antibacterial chitosan films, versatile and eco-friendly materials, have garnered significant attention in both the food industry and medicine due to their unique properties, including biodegradability, biocompatibility, and antimicrobial activity. This review delves into the various types of chitosan films and their distinct applications. The categories of films discussed span from pure chitosan films to those enhanced with additives such as metal nanoparticles, metal oxide nanoparticles, graphene, fullerene and its derivatives, and plant extracts. Each type of film is examined in terms of its synthesis methods and unique properties, establishing a clear understanding of its potential utility. In the food industry, these films have shown promise in extending shelf life and maintaining food quality. In the medical field, they have been utilized for wound dressings, drug delivery systems, and as antibacterial coatings for medical devices. The review further suggests that the incorporation of different additives can significantly enhance the antibacterial properties of chitosan films. While the potential of antibacterial chitosan films is vast, the review underscores the need for future research focused on optimizing synthesis methods, understanding structure-property relationships, and rigorous evaluation of safety, biocompatibility, and long-term stability in real-world applications.

Novel Highly Efficient Antibacterial Chitosan-Based Films.

In this study, we elaborated new chitosan-based films reinforced by iron(III)-containing chitosan nanoparticles Fe(III)-CS-NPs at different concentrations. We found that the optimum concentration of Fe(III)-CS-NPs for the improvement of antibacterial and mechanical properties of the films was 10% (σb = ca. 8.8 N/mm2, εb = ca. 41%, inhibition zone for S. aureus = ca. 16.8 mm and for E. coli = ca. 11.2 mm). Also, using the click-chemistry approach (thiol-ene reaction), we have synthesized a novel water-soluble cationic derivative of chitin. The addition of this derivative of chitin to the chitosan polymer matrix of the elaborated film significantly improved its mechanical (σb = ca. 11.6 N/mm2, εb = ca. 75%) and antimicrobial (inhibition zone for S. aureus = ca. 19.6 mm and for E. coli = ca. 14.2 mm) properties. The key mechanism of the antibacterial action of the obtained films is the disruption of the membranes of bacterial cells. The elaborated antibacterial films are of interest for potential biomedical and food applications.

Synthesis, crystal structure and Hirshfeld surface analysis of di-µ2-iodido-bis-[(2,2'-bi-quinoline-κ2 N,N')copper(I)].

The mol-ecular and crystal structures of the title compound, [Cu2I2(C18H12N2)2], were examined by single-crystal X-ray diffraction and Hirshfeld surface analysis. The Cu atom is coordinated in a distorted tetra-hedral geometry by two N atoms from the 2,2'-bi-quinoline ligands and the two µ2-bridging iodide ligands. The mol-ecules are in contact via π-π-stacking inter-actions. Hirshfeld surface analysis showed that the most important contributions to the inter-molecular inter-actions are H⋯H (39.7%), H⋯I/I⋯H (17.8%), C⋯H/H⋯C (17.5%), C⋯C (16.5%), N⋯C/C⋯N (3.9%) and N⋯H/H⋯N (3.5%).

Biologically Active Supplements Affecting Producer Microorganisms in Food Biotechnology: A Review.

Microorganisms, fermentation processes, and the resultant metabolic products are a key driving force in biotechnology and, in particular, in food biotechnology. The quantity and/or quality of final manufactured food products are directly related to the efficiency of the metabolic processes of producer microorganisms. Food BioTech companies are naturally interested in increasing the productivity of their biotechnological production lines. This could be achieved via either indirect or direct influence on the fundamental mechanisms governing biological processes occurring in microbial cells. This review considers an approach to improve the efficiency of producer microorganisms through the use of several types of substances or complexes affecting the metabolic processes of microbial producers that are of interest for food biotechnology, particularly fermented milk products. A classification of these supplements will be given, depending on their chemical nature (poly- and oligosaccharides; poly- and oligopeptides, individual amino acids; miscellaneous substances, including vitamins and other organic compounds, minerals, and multicomponent supplements), and the approved results of their application will be comprehensively surveyed.

Robust Supramolecular Dimers Derived from Benzylic-Substituted 1,2,4-Selenodiazolium Salts Featuring Selenium⋯π Chalcogen Bonding.

The series of benzylic-substituted 1,2,4-selenodiazolium salts were prepared via cyclization reaction between 2-pyridylselenyl chlorides and nitriles and fully characterized. Substitution of the Cl anion by weakly binding anions promoted the formation supramolecular dimers featuring four center Se2N2 chalcogen bonding and two antiparallel selenium⋯π interactions. Chalcogen bonding interactions were studied using density functional theory calculations, molecular electrostatic potential (MEP) surfaces, the quantum theory of atoms-in-molecules (QTAIM), and the noncovalent interaction (NCI) plot. The investigations revealed fundamental role of the selenium⋯π contacts that are stronger than the Se⋯N interactions in supramolecular dimers. Importantly, described herein, the benzylic substitution approach can be utilized for reliable supramolecular dimerization of selenodiazolium cations in the solid state, which can be employed in supramolecular engineering.

Chitosan-Based Ciprofloxacin Extended Release Systems: Combined Synthetic and Pharmacological (In Vitro and In Vivo) Studies.

Ciprofloxacin is one of the most effective antibiotics, but it is characterized by a range of side effects. Elaboration of drug-releasing systems which allow to diminish toxicity of ciprofloxacin is a challenging task in medicinal chemistry. The current study is focused on development of new ciprofloxacin releasing systems (CRS). We found that ultrasound efficiently promotes N,N'-dicyclohexyl carbodiimide-mediated coupling between COOH and NH2 functionalities in water. This was used for conjugation of ciprofloxacin to chitosan. The obtained ciprofloxacin/chitosan conjugates are capable of forming their self-assembled nanoparticles (SANPs) in aqueous medium. The SANPs can be additionally loaded by ciprofloxacin to form new CRS. The CRS demonstrated high loading and encapsulation efficiency and they are characterized by extended release profile (20 h). The elaborated CRS were tested in vivo in rats. The in vivo antibacterial effect of the CRS exceeded that of the starting ciprofloxacin. Moreover, the in vivo acute and subacute toxicity of the nanoparticles was almost identical to that of the chitosan, which is considered as the non-toxic biopolymer.

Facile Access to 2-Selenoxo-1,2,3,4-tetrahydro-4-quinazolinone Scaffolds and Corresponding Diselenides via Cyclization between Methyl Anthranilate and Isoselenocyanates: Synthesis and Structural Features.

A practical method for the synthesis of 2-selenoxo-1,2,3,4-tetrahydro-4-quinazolinone was reported. The latter compounds were found to undergo facile oxidation with H2O2 into corresponding diselenides. Novel organoselenium derivatives were characterized by the 1H, 77Se, and 13C NMR spectroscopies, high-resolution electrospray ionization mass spectrometry, IR, elemental analyses (C, H, N), and X-ray diffraction analysis for several of them. Novel heterocycles exhibited multiple remarkable chalcogen bonding (ChB) interactions in the solid state, which were studied theoretically.

Structural Organization of Dibromodiazadienes in the Crystal and Identification of Br···O Halogen Bonding Involving the Nitro Group.

Nitro functionalized dibromodiazadiene dyes were prepared and fully characterized including X-ray single crystal analysis. Electron deficient dibromodiazadienes were found to be able to act as donors of halogen bonding (XB), while the nitro group acted as an acceptor of the XB. Depending on the substituents, the Br···O XB competed with other weak interactions, and for some of the dyes, they even outcompeted the XB involving the nitro group. However, the nitro functionalized dibromoalkenes 6a and 10a, which had only the nitro moiety as the most plausible acceptor of the XB, reliably formed 1D chains via Br⋯O XB. Experimental work was supported by the DFT calculations and topological analysis of the electron density distribution within the framework of Bader's theory (QTAIM method).

Towards Anion Recognition and Precipitation with Water-Soluble 1,2,4-Selenodiazolium Salts: Combined Structural and Theoretical Study.

The synthesis and structural characterization of a series of supramolecular complexes of bicyclic cationic pyridine-fused 1,2,4-selenodiazoles with various anions is reported. The binding of trifluoroacetate, tetrachloroaurate, tetraphenylborate, perrhenate, and pertechnetate anions in the solid state is regarded. All the anions interact with selenodiazolium cations exclusively via a pair of "chelating" Se⋯O and H⋯O non-covalent interactions, which make them an attractive, novel, non-classical supramolecular recognition unit or a synthon. Trifluoroacetate salts were conveniently generated via novel oxidation reaction of 2,2'-dipyridyl diselenide with bis(trifluoroacetoxy)iodo)benzene in the presence of corresponding nitriles. Isolation and structural characterization of transient 2-pyridylselenyl trifluoroacetate was achieved. X-ray analysis has demonstrated that the latter forms dimers in the solid state featuring very short and strong Se⋯O and Se⋯N ChB contacts. 1,2,4-Selenodiazolium trifluoroacetates or halides show good solubility in water. In contrast, (AuCl4)-, (ReO4)-, or (TcO4)- derivatives immediately precipitate from aqueous solutions. Structural features of these supramolecular complexes in the solid state are discussed. The nature and energies of the non-covalent interactions in novel assembles were studied by the theoretical methods. To the best of our knowledge, this is the first study that regards perrhenate and pertechnetate as acceptors in ChB interactions. The results presented here will be useful for further developments in anion recognition and precipitation involving cationic 1,2,4-selenodiazoles.

The first selenium containing chitin and chitosan derivatives: Combined synthetic, catalytic and biological studies.

Ultrasonic approach to the synthesis of the first selenium-containing derivatives of chitin and chitosan has been developed. The synthetic procedure is simple, provides high yields, does not require harsh conditions, and uses water as the reaction medium. The elaborated chitin and chitosan derivatives and their based nanoparticles are non-toxic and possess high antibacterial and antifungal activity. Their antimicrobial activity exceeds the effect of the classic antibiotics (Ampicillin and Gentamicin) and the antifungal drug Amphotericin B. The obtained selenium-containing cationic chitin and chitosan derivatives exhibit a high transfection activity and are promising gene delivery vectors. Nanoparticles of the synthesized polymers are highly efficient catalysts for the oxidation of 1-phenylethyl alcohol to acetophenone by bromine at room temperature.

Nitrogen-Doped Carbon Nanodots Produced by Femtosecond Laser Synthesis for Effective Fluorophores.

Understanding the effect of heteroatom doping is crucial for the design of carbon nanodots (CNDs) with enhanced luminescent properties for fluorescence imaging and light-emitting devices. Here, we study the effect and mechanisms of luminescence enhancement through nitrogen doping in nanodots synthesized by the bottom-up route in an intense femtosecond laser field using the comparative analysis of CNDs obtained from benzene and pyridine. We demonstrate that laser irradiation of aromatic compounds produces hybrid nanoparticles consisting of a nanocrystalline core with a shell of surface-bonded aromatic rings. These nanoparticles exhibit excitation-dependent visible photoluminescence typical for CNDs. Incorporation of nitrogen into pyridine-derived CNDs enhances their luminescence characteristics through the formation of small pyridine-based fluorophores peripherally bonded to the nanoparticles. We identify oxidation of surface pyridine rings as a mechanism of formation of several distinct blue- and green-emitting fluorophores in nanodots, containing pyridine moieties. These findings shed additional light on the nature and formation mechanism of effective fluorophores in nitrogen-doped carbon nanodots produced by the bottom-up route.

Exploring Supramolecular Assembly Space of Cationic 1,2,4-Selenodiazoles: Effect of the Substituent at the Carbon Atom and Anions.

Chalcogenodiazoles have been intensively studied in recent years in the context of their supramolecular chemistry. In contrast, the newly discovered cationic 1,2,4-selenodiazole supramolecular building blocks, which can be obtained via coupling between 2-pyridylselenyl halides and nitriles, are virtually unexplored. A significant advantage of the latter is their facile structural tunability via the variation of nitriles, which could allow a fine tuning of their self-assembly in the solid state. Here, we explore the influence of the substituent (which derives from the nitrile) and counterions on the supramolecular assembly of cationic 1,2,4-selenodiazoles via chalcogen bonding.