Metal-cation-induced shifts in thiolate redox and reduced sulfur speciation.

Sulfur-containing anions (e.g. thiolates, polysulfides) readily exchange in solution, making control over their solution speciation and distribution challenging. Here, we demonstrate that different redox-inactive alkali, alkaline earth, and transition metals (Li+, Na+, K+, Mg2+, Ca2+, Zn2+, and Cd2+) shift the equilibria of sulfur catenation or sulfur reduction/oxidation between thiolate, polysulfanide, and polysulfide anions in acetonitrile solution. The thermodynamic factors that govern these equilibria are examined by identification of intermediate metal thiolate and metal polysulfide species using a combination of NMR spectroscopy, electronic absorption spectroscopy, and mass spectrometry. Electrochemical measurements demonstrate that the metal cation of the electrolyte modulates both sulfur reduction and thiolate oxidation potentials. DFT calculations suggest that the changes in equilibria are driven by stronger covalent interactions between polysulfide anions and more highly charged cations.

Ligand Basicity and Chelate Effects on Sulfur Insertion vs. Sulfur Reduction by Zinc Thiolate Complexes.

4- and 5-coordinate zinc thiolate complexes supported either by bis(carboxamide)pyridine frameworks or by substituted tris(pyrazolyl)borate ligands react with elemental sulfur (S8) following two distinct pathways. Some zinc thiolate moieties insert sulfur atoms to form zinc polysulfanide complexes, while others reduce sulfur and oxidize the thiolate. Here, we compare the effects of ligand electronics, strain, and sterics for selecting the respective reaction pathway. These results show that chelating and electron-deficient thiolate ligands better stabilize persistent zinc-bound polysulfanide species.

EPR spin trapping of nucleophilic and radical reactions at colloidal metal chalcogenide quantum dot surfaces.

The participation of the surfaces of colloidal semiconductor nanocrystal quantum dots (QDs) in QD-mediated photocatalytic reactions is an important factor that distinguishes QDs from other photosensitizers (e.g. transition metal complexes or organic dyes). Here, we probe nucleophilic and radical reactivity of surface sulfides and selenides of metal chalcogenide (CdSe, CdS, ZnSe, and PbS) QDs using chemical reactions and NMR spectroscopy. Additionally, the high sensitivity of EPR spectroscopy is adapted to study these surface-centered reactions through the use of spin traps like 5,5-dimethyl-1-pyrroline-N-oxide (DMPO) under photoexcitation and thermal conditions. We demonstrate that DMPO likely adds to CdSe QD surfaces under thermal conditions by a nucleophilic mechanism in which the surface chalcogenides add to the double bond, followed by further oxidation of the surface-bound product. In contrast, CdS QDs more readily form surface sulfur-centered radicals that can perform reactions including alkene isomerization. These results indicate that QD surfaces should be an important consideration for the design of photocatalysis beyond simply tuning QD semiconductor band gaps.

Photoinduced Ligand-to-Metal Charge Transfer of Cobaltocene: Radical Release and Catalytic Cyclotrimerization.

Irradiation of cobalt metallocenes at the ligand-to-metal charge transfer energies results in the labilization of the cyclopentadienyl-cobalt bond and radical release. The cyclopentadienyl radical is detected by electron paramagnetic resonance (EPR) spectroscopy using a spin trap and can also be chemically trapped using hydrogen-atom-donating reagents. This reaction presents a new photochemical method of generating new cobalt complexes or of forming cyclopentadienyl cobalt(I) species that are active for catalytic [2 + 2 + 2] cyclotrimerization reactions. More importantly, these results also show that cobaltocene should not be considered as a photostable redox reagent under many conditions, including those relevant to photovoltaics or photocatalysis.

Sulfane Decreases the Nucleophilic Reactivity of Zinc Thiolates: Implications for Biological Reactive Sulfur Species.

A zinc dithiolate complex supported by a [N3S2] ligand was studied as a model for zinc-mediated thiolate-disulfide exchange, enabling isolation of a zinc-bound mixed-disulfide intermediate. Solution-phase characterization of this zinc-disulfide complex indicates an interaction between the zinc center and the disulfide moiety that results in activation of the S-S bond for subsequent reactions. Comparison of this reaction with disulfide exchange by a previously prepared zinc tetrasulfanido complex demonstrates that sulfane sulfur (S0) acts as an efficient thiolate trapping agent, that is, polysulfanide anions are much less basic than thiolates. The resulting polysulfanide anions also exhibit decreased nucleophilicity compared to the parent thiolate anions. Alkylation kinetics comparisons between the zinc dithiolate and zinc tetrasulfanido complexes indicate attenuation of zinc-bound thiolate nucleophilicity by sulfane. These results suggest a general interplay between zinc, sulfane, and thiol/thiolate reactivity that can significantly impact biological redox processes.

Cluster self-assembly and anion binding by metal complexes of non-innocent thiazolidinyl-thiolate ligands.

ZnII and FeII chloride complexes of a di(methylthiazolidinyl)pyridine ligand were deprotonated to form the corresponding thiolate complexes supported by redox-active iminopyridine moieties. The thiolate donor groups are nucleophilic and reactive toward oxidants, electrophiles, and protons, while the pendant thiazolidine rings are available for hydrogen bonding. Anion exchange with the weakly-coordinating triflate anion resulted in self-assembly of the iminopyridine complexes to form a trimeric [M3S3] cluster. Hydrogen bonding closely associates anions with this trimetallic core.

Accelerated reduction and solubilization of elemental sulfur by 1,2-aminothiols.

Nucleophilic 1,2-aminothiol compounds readily reduce typically-insoluble elemental sulfur to polysulfides in both water and nonpolar organic solvents. The resulting anionic polysulfide species are stabilized through hydrogen-bonding interactions with the proximal amine moieties. These interactions can facilitate sulfur transfer to alkenes.

Metal-Carbonyl-Functionalized CdSe Nanocrystals: Synthesis, Surface Redox, and Infrared Intensities.

Characterizing the surfaces of colloidal semiconductor nanocrystals (NCs) remains a key challenge for understanding and controlling their physical properties and chemical behavior. For this reason, the development of new methods to study NC surfaces is of great interest. In this paper, we report the use of (Me3Si)2Fe(CO)4 and Et3SiCo(CO)4 as reagents for functionalizing CdSe NC surfaces with organometallic metal tetracarbonyl fragments. This method avoids NC surface reduction and can achieve high metal carbonyl surface densities. Surface reduction or oxidation, as well as changes to the surface stoichiometry, was shown to shift the metal carbonyl CO stretching frequencies, making these surface-bound metal carbonyl fragments useful spectroscopic reporters of NC surface chemistry. Normal coordinate analysis was used on the metal carbonyl CO stretching vibrations to study the electronic influence of the CdSe NCs on the transition-metal center of the metal carbonyl fragments. These studies demonstrate the utility of organometallic spectroscopic reporters in studying the surface chemistry of NCs.

Sulfur transfer reactions of a zinc tetrasulfanido complex.

A zinc tetrasulfanido complex supported by a bis(carboxamide)pyridine ligand framework has been synthesized by the insertion of elemental sulfur into the zinc-S(thiolate) bond of a zinc dithiolate complex ([LZn]2-). This paper reports on sulfur transfer reactions of this polysulfanido complex ([1]2-) and compares this behavior to known reactions of metal polysulfido complexes. Complex [1]2- was demonstrated to be in exchange with [LZn]2- and free elemental sulfur in solution. Although triphenylphosphine abstracts sulfur from [1]2- to form [LZn]2-, complex [LZn]2- can abstract sulfur from the zinc polysulfido complex (TMEDA)ZnS6 (TMEDA = N,N,N',N'-tetramethylethylenediamine). The tetrasulfanido complex [1]2- can also transfer sulfur to dimethyl acetylenedicarboxylate to form a zinc dithiolene complex. These studies demonstrate that the zinc complex with a tetrasulfanido moiety can undergo similar reactions as metal complexes with purely inorganic polysulfido groups, although the final metal-containing products are different.

Photoinduced Surface Charging in Iron-Carbonyl-Functionalized Colloidal Semiconductor Nanocrystals.

Organometallic surface functionalization of colloidal CdSe and CdS nanocrystals using iron tetracarbonyl moieties is demonstrated to enable study of in situ colloidal nanocrystal surface redox chemistry. Spectroscopic measurements of the surface-bound metal carbonyl C-O stretches were used to elucidate the coordination environments and local symmetry of surface sites. The C-O stretching frequencies of these fragments were correlated to the electric field induced by nanocrystal surface charges and shift in energy upon surface reduction or oxidation. These measurements revealed that CdSe nanocrystals can accumulate multiple surface electrons under supra-band gap photoexcitation, a process likely relevant to photoactivated nanocrystal processes such as photobrightening. These surface charges are stable for hours and decay extremely slowly under anaerobic conditions.

Reactivity of Zinc Thiolate Bonds: Oxidative Organopolysulfide Formation and S3 Insertion.

Zinc thiolate bonds are intriguing targets of study because of their redox noninnocence and prevalence in bioinorganic sites. A five-coordinate zinc dithiolate complex [Et4N]2[LZn] (H4L = N,N'-di(2-sulfhydrylphenyl)-pyridine-2,6-dicarboxamide) was synthesized to study the oxidative reactivity of zinc thiolate bonds. Multiple chemically reversible reactions of the zinc thiolate bonds were identified. Oxidation of [Et4N]2[LZn] with iodine resulted in structural rearrangement to a bimetallic disulfide-bridged complex. In contrast, the addition of elemental sulfur to [Et4N]2[LZn] resulted in the insertion of a neutral S3 fragment into the Zn-thiolate bond to selectively form an unusual monometallic tetrasulfanido complex. When oxidized, this tetrasulfanido compound rearranged to form a bimetallic trisulfide-bridged complex. The observed diversity of zinc thiolate reactivity, particularly with sulfur, is likely important in biological contexts.

Effects of Lewis Acidic Metal Ions (M) on Oxygen-Atom Transfer Reactivity of Heterometallic Mn3MO4 Cubane and Fe3MO(OH) and Mn3MO(OH) Clusters.

The modulation of the reactivity of metal oxo species by redox inactive metals has attracted much interest due to the observation of redox inactive metal effects on processes involving electron transfer both in nature (the oxygen-evolving complex of Photosystem II) and in heterogeneous catalysis (mixed-metal oxides). Studies of small-molecule models of these systems have revealed numerous instances of effects of redox inactive metals on electron- and group-transfer reactivity. However, the heterometallic species directly involved in these transformations have rarely been structurally characterized and are often generated in situ. We have previously reported the preparation and structural characterization of multiple series of heterometallic clusters based on Mn3 and Fe3 cores and described the effects of Lewis acidity of the heterometal incorporated in these complexes on cluster reduction potential. To determine the effects of Lewis acidity of redox inactive metals on group transfer reactivity in structurally well-defined complexes, we studied [Mn3MO4], [Mn3MO(OH)], and [Fe3MO(OH)] clusters in oxygen atom transfer (OAT) reactions with phosphine substrates. The qualitative rate of OAT correlates with the Lewis acidity of the redox inactive metal, confirming that Lewis acidic metal centers can affect the chemical reactivity of metal oxo species by modulating cluster electronics.

Extremely Slow Spontaneous Electron Trapping in Photodoped n-Type CdSe Nanocrystals.

The trapping dynamics of conduction-band electrons in colloidal degenerately doped n-CdSe nanocrystals prepared by photochemical reduction (photodoping) were measured by direct optical methods. The nanocrystals show spontaneous electron trapping with distributed kinetics that extend to remarkably long timescales. Shifts in nanocrystal band-edge potentials caused by quantum confinement and surface ion stoichiometry were also measured by spectroelectrochemical techniques, and their relationship to the slow electron trapping is discussed. The very long electron-trapping timescales observed in these measurements are more consistent with atomic rearrangement than with fundamental electron-transfer processes. Such slow and broadly distributed electron-trapping dynamics are reminiscent of the well-known distributed dynamics of nanocrystal photoluminescence blinking, and potential relationships between the two phenomena are discussed.

Electron Stability and Negative-Tetron Luminescence in Free-Standing Colloidal n-Type CdSe/CdS Quantum Dots.

We examine the effects of CdS shell growth on photochemical reduction of colloidal CdSe quantum dots (QDs) and describe the spectroscopic properties of the resulting n-type CdSe/CdS QDs. CdS shell growth greatly slows electron trapping. Because of this improvement, complete two-electron occupancy of the 1Se conduction-band orbital is achieved in CdSe/CdS QDs and found to be much more stable than in past experiments. Simultaneous photoluminescence at two different energies is now observed from QDs possessing two excess conduction-band electrons, reflecting competing recombination of discretized 1Se and 1Pe conduction-band electrons within photogenerated four-carrier negative tetrons (three electrons and one hole). Stable occupancy of the 1Pe level is not achievable under these conditions, and possible reasons are discussed. The stability and accessibility of these multielectron configurations, and the facile spectroscopic detection of negative tetrons, both make photodoped core/shell QDs attractive for exploring the physical properties of free-standing heavily n-doped colloidal CdSe-based QDs.

Soft x-ray absorption spectroscopy of metalloproteins and high-valent metal-complexes at room temperature using free-electron lasers.

X-ray absorption spectroscopy at the L-edge of 3d transition metals provides unique information on the local metal charge and spin states by directly probing 3d-derived molecular orbitals through 2p-3d transitions. However, this soft x-ray technique has been rarely used at synchrotron facilities for mechanistic studies of metalloenzymes due to the difficulties of x-ray-induced sample damage and strong background signals from light elements that can dominate the low metal signal. Here, we combine femtosecond soft x-ray pulses from a free-electron laser with a novel x-ray fluorescence-yield spectrometer to overcome these difficulties. We present L-edge absorption spectra of inorganic high-valent Mn complexes (Mn ∼ 6-15 mmol/l) with no visible effects of radiation damage. We also present the first L-edge absorption spectra of the oxygen evolving complex (Mn4CaO5) in Photosystem II (Mn < 1 mmol/l) at room temperature, measured under similar conditions. Our approach opens new ways to study metalloenzymes under functional conditions.

A CaMn4O2 model of the biological oxygen evolving complex: synthesis via cluster expansion on a low symmetry ligand.

Using a new multinucleating ligand featuring two dipyridyl alkoxide moieties and a carboxylate moiety, low symmetry tetranuclear complexes 1-M (M = Mn, Fe, and Co) have been synthesized. Complex 1-Mn was used as a precursor for the synthesis of a pentanuclear CaMn4O2 cluster (3) with the same metal stoichiometry as the biological OEC.

Selenium Redox Reactivity on Colloidal CdSe Quantum Dot Surfaces.

Understanding the structural and compositional origins of midgap states in semiconductor nanocrystals is a longstanding challenge in nanoscience. Here, we report a broad variety of reagents useful for photochemical reduction of colloidal CdSe quantum dots, and we establish that these reactions proceed via a dark surface prereduction step prior to photoexcitation. Mechanistic studies relying on the specific properties of various reductants lead to the proposal that this surface prereduction occurs at oxidized surface selenium sites. These results demonstrate the use of small-molecule inorganic chemistries to control the physical properties of colloidal QDs and provide microscopic insights into the identities and reactivities of their localized surface species.

Effect of the Mn Oxidation State on Single-Molecule-Magnet Properties: Mn(III) vs Mn(IV) in Biologically Inspired DyMn3O4 Cubanes.

Inspired by the ferromagnetic coupling in the cubane model CaMn(IV)3O4 of the oxygen-evolving complex of photosystem II, 3d-4f mixed-metal DyMn3O4 clusters were prepared for investigation of the magnetic properties. For comparison, YMn(IV)3O4 and YMn(IV)2Mn(III)O4 clusters were investigated as well and showed ferromagnetic interactions, like the calcium analogue. DyMn(IV)3O4 displays single-molecule-magnet properties, while the one-electron-reduced species (DyMn(IV)2Mn(III)O4) does not, despite the presence of a Mn(III) center with higher spin and single-ion anisotropy.

Potentiometric Measurements of Semiconductor Nanocrystal Redox Potentials.

A potentiometric method for measuring redox potentials of colloidal semiconductor nanocrystals (NCs) is described. Fermi levels of colloidal ZnO NCs are measured in situ during photodoping, allowing correlation of NC redox potentials and reduction levels. Excellent agreement is found between electrochemical and optical redox-indicator methods. Potentiometry is also reported for colloidal CdSe NCs, which show more negative conduction-band-edge potentials than in ZnO. This difference is highlighted by spontaneous electron transfer from reduced CdSe NCs to ZnO NCs in solution, with potentiometry providing a measure of the inter-NC electron-transfer driving force. Future applications of NC potentiometry are briefly discussed.

Redox Potentials of Colloidal n-Type ZnO Nanocrystals: Effects of Confinement, Electron Density, and Fermi-Level Pinning by Aldehyde Hydrogenation.

Electronically doped colloidal semiconductor nanocrystals offer valuable opportunities to probe the new physical and chemical properties imparted by their excess charge carriers. Photodoping is a powerful approach to introducing and controlling free carrier densities within free-standing colloidal semiconductor nanocrystals. Photoreduced (n-type) colloidal ZnO nanocrystals possessing delocalized conduction-band (CB) electrons can be formed by photochemical oxidation of EtOH. Previous studies of this chemistry have demonstrated photochemical electron accumulation, in some cases reaching as many as >100 electrons per ZnO nanocrystal, but in every case examined to date this chemistry maximizes at a well-defined average electron density of ⟨Nmax⟩ ≈ (1.4 ± 0.4) × 10(20) cm(-3). The origins of this maximum have never been identified. Here, we use a solvated redox indicator for in situ determination of reduced ZnO nanocrystal redox potentials. The Fermi levels of various photodoped ZnO nanocrystals possessing on average just one excess CB electron show quantum-confinement effects, as expected, but are >600 meV lower than those of the same ZnO nanocrystals reduced chemically using Cp*2Co, reflecting important differences between their charge-compensating cations. Upon photochemical electron accumulation, the Fermi levels become independent of nanocrystal volume at ⟨N⟩ above ∼2 × 10(19) cm(-3), and maximize at ⟨Nmax⟩ ≈ (1.6 ± 0.3) × 10(20) cm(-3). This maximum is proposed to arise from Fermi-level pinning by the two-electron/two-proton hydrogenation of acetaldehyde, which reverses the EtOH photooxidation reaction.